10CL016YE144C6G - Cyclone 10 LP FPGA 16K LE | Intel | Altera
MPN: 10CL016YE144C6G ✓ Aktif10CL016YE144C6G Ringkasan
An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit whose digital logic functionality is defined after manufacturing through a configuration bitstream loaded into on-chip SRAM. In the system hierarchy, FPGAs sit between fixed-function ASICs and microcontrollers: like microcontrollers they are reprogrammable in-circuit, but unlike microcontrollers they implement logic in parallel hardware fabric rather than sequential instruction execution. Cyclone 10 LP specifically targets the low-cost, low-power tier of Intel's FPGA portfolio, balancing logic density with sub-watt static power consumption.
Key features of the 10CL016YE144C6G include 78 maximum user I/O pins, four general-purpose PLLs, two I/O banks supporting LVDS, LVCMOS, SSTL, and HSTL I/O standards, and configuration via serial flash (AS), parallel flash (AP), or JTAG. The device operates from a 1.0V/1.2V core voltage with separate VCCIO banks, and offers commercial temperature grade (0C to +85C junction).
Architecturally, the Cyclone 10 LP fabric uses 8-input adaptive logic modules (ALMs), variable-precision DSP blocks, and M9K embedded memory blocks. Configuration bitstream is stored in on-chip SRAM and must be loaded from external flash or JTAG at every power-up. The 'Y' package suffix indicates 144-pin EQFP/LQFP with exposed pad.
Typical applications include industrial motor control, video bridging and image processing, low-cost I/O expansion, protocol bridging (UART/SPI/I2C to Ethernet), and portable or battery-powered embedded systems. Designers commonly pair this FPGA with TI or Maxim power management ICs and Micron NOR flash for configuration storage.
When designing with the 10CL016YE144C6G, allocate at least four PCB layers for proper signal and power integrity, and provide a continuous GND plane under the exposed thermal pad. The Quartus Prime Lite design software is the supported toolchain for synthesis, place-and-route, and bitstream generation.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the Cyclone 10 LP 10CL016YE144C6G - information not found in a single manufacturer datasheet page.
Alternatif penggantian untuk 10CL016YE144C6G — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian 10CL016YE144C6G (sama faktor bentuk dan footprint) — berbeda di dalam Package, Embedded Memory, Speed Grade, Family, PLLs.
10CL010YE144C6G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10CL025YE144C6G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10CL016YE144C8G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10CL016YE144A7G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10CL016YE144I7G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10CL006YE144C6G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10CL016YE144C6G Rating Maksimal & Karakteristik Listrik
| Series | Cyclone 10 LP |
| Logic Elements (LE) | 15,408 |
| Embedded Memory Bits | 516,096 |
| M9K Memory Blocks | 56 |
| 18x18 Hardware Multipliers | 56 |
| Maximum User I/O | 78 |
| I/O Banks | 2 |
| PLLs | 4 |
| Global Clock Networks | 20 |
| Paket | 144-pin EQFP/LQFP (Exposed Pad) |
| Operating Temperature (Commercial) | 0C to +85C (TJ) |
| Core Voltage | 1.0V / 1.2V (VCCINT) |
| Tipe Mounting | Surface Mount |
| Level MSL | 3 (168 hours) |
| Status RoHS | Compliant |
| Configuration Method | Serial (AS), Parallel (AP), JTAG |
Konfigurasi Pin 10CL016YE144C6G
| Pin produk 1 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 2 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 3 | VCCIO1 — I/O Bank 1 supply voltage |
| Pin produk 4 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 5 | GND — Ground |
| Pin produk 6 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 7 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 8 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 9 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 10 | VCCINT — Core voltage 1.0V/1.2V |
| Pin produk 11 | GND — Ground |
| Pin produk 12 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 13 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 14 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 15 | VCCIO1 — I/O Bank 1 supply voltage |
| Pin produk 16 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 17 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 18 | GND — Ground |
| Pin produk 19 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 20 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 21 | VCCINT — Core voltage 1.0V/1.2V |
| Pin produk 22 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 23 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 24 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 25 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 26 | GND — Ground |
| Pin produk 27 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 28 | VCCIO1 — I/O Bank 1 supply voltage |
| Pin produk 29 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 30 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 31 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 32 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 33 | GND — Ground |
| Pin produk 34 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 35 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 36 | VCCINT — Core voltage 1.0V/1.2V |
| Pin produk 37 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 38 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 39 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 40 | GND — Ground |
| Pin produk 41 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 42 | VCCIO1 — I/O Bank 1 supply voltage |
| Pin produk 43 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 44 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 45 | I/O — General-purpose user I/O (Bank 1) |
| Pin produk 46 | CONF_DONE — Configuration done status (open-drain) |
| Pin produk 47 | nSTATUS — Configuration status (open-drain) |
| Pin produk 48 | nCONFIG — Configuration start (active-low) |
| Pin produk 49 | TMS — JTAG Test Mode Select |
| Pin produk 50 | TCK — JTAG Test Clock |
| Pin produk 51 | TDO — JTAG Test Data Out |
| Pin produk 52 | TDI — JTAG Test Data In |
| Pin produk 53 | VCCPD — Configuration I/O voltage (1.8V/2.5V/3.3V) |
| Pin produk 54 | GND — Ground |
| Pin produk 55 | VCCINT — Core voltage 1.0V/1.2V |
| Pin produk 56 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 57 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 58 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 59 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 60 | VCCIO2 — I/O Bank 2 supply voltage |
| Pin produk 61 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 62 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 63 | GND — Ground |
| Pin produk 64 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 65 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 66 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 67 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 68 | VCCINT — Core voltage 1.0V/1.2V |
| Pin produk 69 | GND — Ground |
| Pin produk 70 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 71 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 72 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 73 | VCCIO2 — I/O Bank 2 supply voltage |
| Pin produk 74 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 75 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 76 | GND — Ground |
| Pin produk 77 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 78 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 79 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 80 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 81 | VCCINT — Core voltage 1.0V/1.2V |
| Pin produk 82 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 83 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 84 | GND — Ground |
| Pin produk 85 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 86 | VCCIO2 — I/O Bank 2 supply voltage |
| Pin produk 87 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 88 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 89 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 90 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 91 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 92 | GND — Ground |
| Pin produk 93 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 94 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 95 | VCCINT — Core voltage 1.0V/1.2V |
| Pin produk 96 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 97 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 98 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 99 | GND — Ground |
| Pin produk 100 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 101 | VCCIO2 — I/O Bank 2 supply voltage |
| Pin produk 102 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 103 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 104 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 105 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 106 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 107 | GND — Ground |
| Pin produk 108 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 109 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 110 | VCCINT — Core voltage 1.0V/1.2V |
| Pin produk 111 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 112 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 113 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 114 | GND — Ground |
| Pin produk 115 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 116 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 117 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 118 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 119 | VCCIO2 — I/O Bank 2 supply voltage |
| Pin produk 120 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 121 | GND — Ground |
| Pin produk 122 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 123 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 124 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 125 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 126 | VCCINT — Core voltage 1.0V/1.2V |
| Pin produk 127 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 128 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 129 | GND — Ground |
| Pin produk 130 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 131 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 132 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 133 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 134 | VCCIO2 — I/O Bank 2 supply voltage |
| Pin produk 135 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 136 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 137 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 138 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 139 | GND — Ground |
| Pin produk 140 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 141 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 142 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 143 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk 144 | I/O — General-purpose user I/O (Bank 2) |
| Pin produk EP | Exposed Pad — Thermal pad, must be soldered to GND |
Aplikasi Umum
10CL016YE144C6G cocok untuk 7 aplikasis: Industrial Motor Control, Video Bridging and Image Processing, Industrial I/O Expansion and Protocol Bridging, Low-Cost LED Display Controllers, Battery-Powered Portable Instrumentation, Automotive Infotainment Auxiliary Logic, Education and FPGA Prototyping Boards.
Industrial Motor Control
The 10CL016YE144C6G is widely used in industrial servo drives and motor controllers where its 56 18x18 hardware multipliers implement Field-Oriented Control (FOC) math in parallel, freeing the host MCU for supervisory tasks. The 78 user I/O pins accept multiple encoder inputs (QEP, SSI, EnDat), Hall sensors, and high-resolution PWM signals to IGBT gate drivers. The four PLLs generate the jitter-clean clocks required for resolver excitation and Sigma-Delta ADC interfacing, while 516 Kbit of embedded SRAM holds lookup tables for sine/cosine, Park/Clarke transforms, and current-loop state variables without external memory. Compared with running FOC on a Cortex-M4, the FPGA offload reduces current-loop period from 20 us to under 1 us, enabling higher RPM precision at low speed.
Direkomendasikan
Video Bridging and Image Processing
The 10CL016YE144C6G acts as a low-cost video bridge between MIPI CSI-2, parallel CMOS, or HDMI sources and host SoCs lacking those native interfaces. With 15,408 logic elements, the fabric fits a CSI-2 receiver, color space conversion (YUV422 to RGB888), scaling, and a multi-lane high-speed LVDS output to the host. The 56 M9K blocks of 516 Kbit embedded memory provide line buffers for up to 720p60 frames, eliminating the need for an external DDR. Compared with discrete ASSP bridge ICs, this Cyclone 10 LP approach allows firmware upgrades to support new color formats or resolutions without respinning the board.
Direkomendasikan
Industrial I/O Expansion and Protocol Bridging
Engineers use the 10CL016YE144C6G to add UART, SPI, I2C, RS-485, and CAN interfaces to legacy controllers, or to bridge between industrial protocols like Modbus RTU, EtherCAT, and PROFINET. The 78 I/O pins comfortably host multiple galvanically-isolated UART channels plus dedicated interrupt and status lines. The Cyclone 10 LP's 4 PLLs synthesize the precise clock trees required for CAN-FD at 5 Mbps or RS-485 at 20 Mbps without jitter. This protocol-bridging role takes advantage of the FPGA's parallel logic to handle state machines and CRC checks concurrently, offloading the host processor entirely.
Direkomendasikan
Low-Cost LED Display Controllers
The 10CL016YE144C6G drives chains of WS2812B, APA102, or DMX512 LED strips with precise timing that microcontrollers struggle to maintain under heavy DMA load. Its 56 hardware multipliers handle per-pixel gamma correction and color-space conversion in real time for matrix sizes up to 64x32, while 516 Kbit embedded memory stores framebuffers for animations. The 78 user I/O can be partitioned into multiple LED data channels to refresh several strips in parallel, achieving refresh rates well above 200 Hz with no flicker. Commercial temperature grade (0C-85C) suits indoor commercial signage installations.
Direkomendasikan
Battery-Powered Portable Instrumentation
The 10CL016YE144C6G is a strong fit for portable test and measurement instruments where Cyclone 10 LP's low static power keeps idle consumption under 30 mW at 1.0V core. The 15,408 logic elements implement DSP pipelines (FIR filters, FFTs), 56 multipliers deliver throughput up to 150 MSPS for 18-bit operations, and the 78 I/O connect to precision ADCs, DACs, and displays over LVDS or LVCMOS. Designers can sleep the FPGA between acquisitions and wake in microseconds, preserving battery life. Commercial 0C-85C temperature grade suits handheld use in most indoor environments.
Direkomendasikan
Automotive Infotainment Auxiliary Logic
Although commercial-grade, the 10CL016YE144C6G finds use as auxiliary logic in development and pre-production automotive infotainment systems - LVDS bridging between head-unit SoCs, rear-seat display multiplexing, and audio sample-rate conversion. For production automotive deployments, choose the industrial-grade 10CL016YE144I7G variant (AEC-Q intent) in the same 144-pin EQFP package. The pin-compatible migration path lets prototypes start with commercial silicon and upgrade to industrial without PCB rework.
Direkomendasikan
Education and FPGA Prototyping Boards
The 10CL016YE144C6G is a popular FPGA for university curricula and hobbyist development boards (DE10-Lite class) because it offers enough logic (15,408 LE) to teach Verilog/VHDL, run RISC-V soft cores, and interface to peripherals, all while staying affordable. The 144-pin EQFP package is easy to hand-solder on breakout boards, and Quartus Prime Lite is a free toolchain. Its commercial temperature grade and 78 I/O are sufficient for lab projects ranging from VGA generators to simple CPUs.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk 10CL016YE144C6G — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | 10CL010YE144C6G | 10CL025YE144C6G | 10CL016YE144C8G | 10CL016YE144I7G | 10CL006YE144C6G |
|---|---|---|---|---|---|---|
| Package | 144-pin EQFP/LQFP (Exposed Pad) | 144-pin EQFP/LQFP - same | 144-pin EQFP/LQFP - same | 144-pin EQFP/LQFP - same | 144-pin EQFP/LQFP - same | 144-pin EQFP/LQFP - same |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Logic Elements | 15,408 | 10,320 (-33%) | 24,624 (+60%) | 15,408 (same) | 15,408 (same) | 6,272 (-59%) |
| Embedded Memory | 516 Kbit (56 M9K) | 414 Kbit (46 M9K) | 594 Kbit (66 M9K) | 516 Kbit (56 M9K) | 516 Kbit (56 M9K) | 270 Kbit (30 M9K) |
| 18x18 Multipliers | 56 | 46 (-18%) | 66 (+18%) | 56 (same) | 56 (same) | 30 (-46%) |
| Speed Grade | C6 | C6 (same) | C6 (same) | C8 (slower Fmax) | I7 (industrial) | C6 (same) |
| Temperature Grade | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Industrial (-40C to +100C) | Commercial (0C to +85C) |
| Approx. Unit Price (qty 1) | $38.50 | Lower (10K LE tier) | Higher (25K LE tier) | Lower (C8 speed grade) | Higher (industrial grade) | Lowest (6K LE tier) |
Diferensiator Kunci
- Higher logic density in same package vs 10CL010 (vs10CL010YE144C6G)
- Industrial temperature option available (vs10CL016YE144I7G)
- Higher DSP multiplier count than lower-tier devices (vs10CL006YE144C6G)
Catatan Desain
The 10CL016YE144C6G requires three independent power rails: VCCINT (1.0V or 1.2V core), VCCIO (1.2V-3.3V per bank), and VCCPD (1.8V/2.5V/3.3V for configuration I/O). Use a TI TPS7A4701 or similar low-noise LDO for VCCINT and place 100nF + 10uF ceramic decoupling within 5mm of each VCC pin. According to the Cyclone 10 LP pin connection guidelines, VCCPD must be powered up before or simultaneously with VCCINT - otherwise the configuration I/O latch-up may occur.
The exposed thermal pad (EP) on the 144-pin EQFP package MUST be soldered to a GND copper pour of at least 25mm x 25mm on the top layer with thermal vias to inner GND planes. Estimated: at typical 200mW internal dissipation and 30C ambient, junction temperature rise is approximately 15-20C, well within the 85C commercial limit. Without proper EP soldering, junction temperature can exceed 100C and trigger thermal-sensor logic-array behavior.
Route all high-speed LVDS pairs as length-matched differential (within 150 mil) on the top layer with a continuous GND reference plane beneath. For 144-pin EQFP at 0.5mm pitch, use 0.2mm traces and 0.2mm spacing with controlled impedance of 100 ohm differential. According to the Cyclone 10 LP PCB layout guidelines, keep JTAG signals (TMS/TCK/TDO/TDI) away from high-edge-rate clocks to avoid noise-induced programming failures.
Do not leave MSEL pins floating - they select the configuration mode (AS, AP, PS, JTAG). For AS configuration with EPCQ flash, tie MSEL[2:0] to 000. A common mistake is to forget the CRC error pin pull-up, leaving the FPGA unable to signal configuration failure. Also ensure CONFIG_DONE has a 10kohm pull-up to VCCPD and that nCONFIG is driven high only after all rails are stable.
Informasi Konformitas
RoHS and lead-free per Intel product page. Commercial temperature grade - not AEC-Q100 qualified; choose 10CL016YE144I7G for industrial-grade applications.
