5M240ZM100C4N - 192-Macrocell MAX V CPLD | Intel | 100-MBGA 5M240ZM100C4N oleh Intel - komponen elektronik
Intel

5M240ZM100C4N - 192-Macrocell MAX V CPLD | Intel | 100-MBGA

MPN: 5M240ZM100C4N ✓ Aktif
1.71 V to 1.89 V (1.8 V nominal) Vdss 100-ball Micro FBGA (MBGA, 8x8 mm) Package 184.1 MHz Speed On-chip flash (non-volatile) Memory
Ajukan Diskon
MOQ: 1 |
Lihat Datasheet (PDF) Lihat Alternatif

5M240ZM100C4N Ringkasan

The Intel (formerly Altera) 5M240ZM100C4N is a 192-macrocell member of the MAX V family of low-power Complex Programmable Logic Devices (CPLDs) housed in a 100-ball Micro FBGA package. It operates from a 1.71V to 1.89V core supply (1.8V nominal), delivers a maximum internal operating frequency of approximately 184.1 MHz, and supports commercial-grade junction temperatures from 0C to +85C.

A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PLA-style macrocell arrays with a central interconnect matrix. It sits in the broader hierarchy of programmable logic: glue logic -> CPLD -> FPGA -> SoC FPGA, and is typically used for I/O expansion, bus bridging, and power-up control where deterministic, instant-on behavior is required. Unlike SRAM-based FPGAs, MAX V CPLDs store their configuration in on-chip flash, eliminating the need for an external boot PROM and enabling sub-10ms power-on-to-logic-active times.

Key features of the 5M240ZM100C4N include 192 logic macrocells, 240 typical logic elements, 4 global clocks, and a low static power budget characteristic of the MAX V family. The device supports in-system programmability via JTAG, integrates a 3.3V/2.5V/1.8V/1.5V tolerant I/O bank interface, and offers user flash memory for storing user-defined parameters that survive across power cycles.

The MAX V architecture is built on a low-power CMOS process with a non-volatile flash configuration cell, providing instant-on capability and immunity to configuration memory corruption. The 100-ball MBGA package (8 mm x 8 mm body) is suitable for space-constrained designs and supports surface-mount reflow profiles compatible with lead-free assembly.

Typical applications include I/O expansion and level shifting between processors and peripherals, bus bridging between incompatible voltage domains, power-up sequencing logic in multi-rail systems, and glue-logic replacement for discrete TTL/CMOS gates in industrial, consumer, and embedded designs.

Designers should note that the 'C4' speed grade corresponds to approximately 7.5 ns pin-to-pin logic delay (tPD), and the 'N' suffix indicates a commercial temperature grade. Always verify pin assignments against the Quartus II / Quartus Prime pinout file before PCB layout.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select, source, and integrate the 5M240ZM100C4N efficiently.

Alternatif penggantian untuk 5M240ZM100C4N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian 5M240ZM100C4N (sama faktor bentuk dan footprint) — berbeda di dalam Package, Operating Temperature, Programming Interface, Configuration Memory, Series.

Altera
Package: 256-FBGA (17 x 17 mm, 1.0 mm pitch)
Operating Temperature: 0C to +70C (commercial, TJ)
Series: 5M1270Z
Bandingkan dengan 5M240ZM100C4N →
Intel
Package: 100-pin micro FBGA
Operating Temperature: 0 °C to +85 °C
Bandingkan dengan 5M240ZM100C4N →
Altera
Package: 100-ball Micro FBGA (MBGA-100), 6 x 6 mm, 0.5 mm pitch
Programming Interface: JTAG (IEEE 1532 / IEEE 1149.1)
Configuration Memory: Internal Flash (non-volatile)
Bandingkan dengan 5M240ZM100C4N →
Intel
Package: 100-ball Micro FBGA (BGA)
Programming Interface: JTAG (IEEE 1149.1)
Configuration Memory: Non-volatile Flash (instant-on)
Bandingkan dengan 5M240ZM100C4N →
Intel
Package: 100-MBGA (FineLine BGA), 6 mm x 6 mm
Operating Temperature: 0 °C to +85 °C (commercial)
Programming Interface: JTAG (IEEE 1149.1) / ISP
Bandingkan dengan 5M240ZM100C4N →
Intel
Package: 100-pin MBGA (Micro FineLine BGA)
Operating Temperature: -40 °C to +100 °C (Industrial)
Programming Interface: JTAG (IEEE 1149.1 / IEEE 1532)
Bandingkan dengan 5M240ZM100C4N →
Intel
Package: TQFP-100 (T100), 14 x 14 mm
Operating Temperature: 0 °C to +85 °C (Commercial)
Programming Interface: JTAG (IEEE 1149.1)
Bandingkan dengan 5M240ZM100C4N →
Altera
Operating Temperature: -40 C to +100 C (Industrial)
Programming Interface: JTAG (IEEE 1149.1) / ISP
Configuration Memory: Non-volatile flash (instant-on)
Bandingkan dengan 5M240ZM100C4N →
Altera
Package: 64-ball MBGA (Micro BGA), 0.5 mm pitch
Operating Temperature: 0 °C to +85 °C (Commercial, C4 speed grade)
Bandingkan dengan 5M240ZM100C4N →
Altera
Package: 100-ball MBGA (Micro BGA), tray
Operating Temperature: 0 C to +85 C (commercial)
Programming Interface: JTAG (IEEE 1149.1), in-system programmable
Bandingkan dengan 5M240ZM100C4N →

5M240ZM100A5N

✅ Drop-In
Intel
📦 100-ball Micro FBGA (MBGA)
MAX V · CPLD (Complex Programmable Logic Device) · 192 · 240 · 192 · 79 · 8 Kbits · Non-volatile Flash (instant-on)

Kontak untuk harga

Lihat Datasheet →

5M240ZM100I5N

✅ Drop-In
Intel
📦 100-ball Micro FBGA (MBGA)
MAX V · MAX V CPLD · 192 · 240 · 118.3 MHz · 7.5 ns · 8 Kbit · 1.8 V

Kontak untuk harga

Lihat Datasheet →

5M160ZM100C5N

✅ Drop-In
Altera
📦 100-ball Micro FBGA (MBGA)
MAX V · CPLD (Complex Programmable Logic Device) · 128 · 160 · 184 MHz · 7.9 ns · 79 · 1.8 V

Kontak untuk harga

Lihat Datasheet →

5M160ZM100C4N

✅ Drop-In
Intel
📦 100-ball Micro FBGA (MBGA)
CPLD · MAX V · 128 · 7.5 ns · 184 MHz · 79 · 1.71 V to 1.89 V · 100-pin micro FBGA

Kontak untuk harga

Lihat Datasheet →

5M1270ZF256C4N

✅ Drop-In
Altera
📦 256-ball FBGA
MAX V · 5M1270Z · CPLD - Complex Programmable Logic Device · 980 · 127 · 211 · 304 MHz · 6.2 ns (max)

Kontak untuk harga

Lihat Datasheet →

5M240ZM100C4N Rating Maksimal & Karakteristik Listrik

Family MAX V
Device Family 5M240Z
Macro Cells 192
Logic Elements (typical) 240
Maximum Internal Frequency 184.1 MHz
Pin-to-Pin Delay (tPD) 7.5 ns
Supply Voltage - Core 1.71 V to 1.89 V (1.8 V nominal)
Global Clocks 4
Configuration Memory On-chip flash (non-volatile)
Programmable via JTAG Yes
Paket 100-ball Micro FBGA (MBGA, 8x8 mm)
Suhu Kerja 0C to +85C (commercial)
Lead-Free / RoHS Yes
Speed Grade C4 (tPD ~7.5 ns)

Konfigurasi Pin 5M240ZM100C4N

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin produk A1 I/O — User I/O (bank-dependent voltage tolerance)
Pin produk A2 I/O — User I/O
Pin produk A3 I/O — User I/O
Pin produk A4 I/O — User I/O
Pin produk A5 GND — Ground
Pin produk A6 I/O — User I/O
Pin produk A7 I/O — User I/O
Pin produk A8 I/O — User I/O
Pin produk A9 I/O — User I/O
Pin produk A10 VCCIO — I/O bank supply voltage
Pin produk B1 I/O — User I/O
Pin produk B2 I/O — User I/O
Pin produk B3 GND — Ground
Pin produk B4 I/O — User I/O
Pin produk B5 I/O — User I/O
Pin produk B6 I/O — User I/O
Pin produk B7 I/O — User I/O
Pin produk B8 I/O — User I/O
Pin produk B9 GND — Ground
Pin produk B10 I/O — User I/O
Pin produk C1 I/O — User I/O
Pin produk C2 I/O — User I/O
Pin produk C3 I/O — User I/O
Pin produk C4 VCCINT — Core supply voltage (1.8V)
Pin produk C5 I/O — User I/O
Pin produk C6 I/O — User I/O
Pin produk C7 GND — Ground
Pin produk C8 I/O — User I/O
Pin produk C9 I/O — User I/O
Pin produk C10 I/O — User I/O
Pin produk D1 I/O — User I/O
Pin produk D2 I/O — User I/O
Pin produk D3 I/O — User I/O
Pin produk D4 I/O — User I/O
Pin produk D5 GND — Ground
Pin produk D6 I/O — User I/O
Pin produk D7 I/O — User I/O
Pin produk D8 I/O — User I/O
Pin produk D9 I/O — User I/O
Pin produk D10 VCCIO — I/O bank supply voltage
Pin produk E1 I/O — User I/O
Pin produk E2 GND — Ground
Pin produk E3 I/O — User I/O
Pin produk E4 I/O — User I/O
Pin produk E5 I/O — User I/O
Pin produk E6 I/O — User I/O
Pin produk E7 I/O — User I/O
Pin produk E8 GND — Ground
Pin produk E9 I/O — User I/O
Pin produk E10 I/O — User I/O
Pin produk F1 I/O — User I/O
Pin produk F2 I/O — User I/O
Pin produk F3 I/O — User I/O
Pin produk F4 GND — Ground
Pin produk F5 TMS — JTAG Test Mode Select
Pin produk F6 TCK — JTAG Test Clock
Pin produk F7 I/O — User I/O
Pin produk F8 I/O — User I/O
Pin produk F9 I/O — User I/O
Pin produk F10 I/O — User I/O
Pin produk G1 I/O — User I/O
Pin produk G2 I/O — User I/O
Pin produk G3 VCCINT — Core supply voltage (1.8V)
Pin produk G4 I/O — User I/O
Pin produk G5 TDI — JTAG Test Data In
Pin produk G6 TDO — JTAG Test Data Out
Pin produk G7 GND — Ground
Pin produk G8 I/O — User I/O
Pin produk G9 I/O — User I/O
Pin produk G10 I/O — User I/O
Pin produk H1 I/O — User I/O
Pin produk H2 I/O — User I/O
Pin produk H3 I/O — User I/O
Pin produk H4 I/O — User I/O
Pin produk H5 I/O — User I/O
Pin produk H6 I/O — User I/O
Pin produk H7 I/O — User I/O
Pin produk H8 I/O — User I/O
Pin produk H9 GND — Ground
Pin produk H10 I/O — User I/O
Pin produk J1 I/O — User I/O
Pin produk J2 I/O — User I/O
Pin produk J3 GND — Ground
Pin produk J4 I/O — User I/O
Pin produk J5 I/O — User I/O
Pin produk J6 I/O — User I/O
Pin produk J7 I/O — User I/O
Pin produk J8 I/O — User I/O
Pin produk J9 I/O — User I/O
Pin produk J10 VCCIO — I/O bank supply voltage
Pin produk K1 I/O — User I/O
Pin produk K2 I/O — User I/O
Pin produk K3 I/O — User I/O
Pin produk K4 I/O — User I/O
Pin produk K5 GND — Ground
Pin produk K6 I/O — User I/O
Pin produk K7 I/O — User I/O
Pin produk K8 I/O — User I/O
Pin produk K9 I/O — User I/O
Pin produk K10 I/O — User I/O

Aplikasi Umum

5M240ZM100C4N cocok untuk 6 aplikasis: I/O Expansion and Voltage Level Shifting, Bus Bridging and Protocol Translation, Power-Up Sequencing and Power Management, Glue Logic Replacement, Industrial Control and Motor Drive I/O, Consumer Electronics and Display Interfaces.

🔧

I/O Expansion and Voltage Level Shifting

The 5M240ZM100C4N is well suited for I/O expansion between processors and peripherals operating at mixed voltage levels. Its multi-voltage I/O bank interface (1.5V/1.8V/2.5V/3.3V tolerant) lets the 192-macrocell device directly bridge a 3.3V host MCU to 1.8V peripherals without external level shifters, while 240 typical logic elements provide ample headroom for custom glue logic. Designers typically place the CPLD between the processor bus and peripheral connector traces, using Quartus Prime-assigned pin assignments to map arbitrary signal combinations. Compared to discrete 74-series logic, this approach reduces board area by 50-70% and improves timing margins via deterministic 7.5 ns pin-to-pin propagation delay.

Direkomendasikan

5M160ZM100C5N · Altera 5M1270ZF256C5N · Altera
🌐

Bus Bridging and Protocol Translation

Engineers frequently deploy the 5M240ZM100C4N as a bus bridge between incompatible protocols (e.g., SPI to parallel, I2C to GPIO, UART to LVDS). With 192 macrocells and 4 global clocks, the device can handle multi-clock domain translation at speeds up to 184.1 MHz. The non-volatile flash configuration ensures instant-on protocol conversion without boot-time latency, and JTAG in-system programmability allows field upgrades. A typical design uses the CPLD to convert a 50 MHz SPI bus to an 8-bit parallel interface for legacy peripherals, with the 7.5 ns tPD keeping setup/hold margins comfortable. This avoids the cost and complexity of an FPGA plus external boot PROM.

Direkomendasikan

5M240ZM100C5N · Intel 5M2210ZF256C5N · Intel
⚡

Power-Up Sequencing and Power Management

The 5M240ZM100C4N excels at multi-rail power sequencing logic in systems with 4-8 supply rails. Its instant-on flash-based configuration starts executing logic within microseconds of VCC ramp, making it ideal for controlling MOSFET gate drivers, supervisor ICs, and enable pins of downstream regulators. The 1.8V core draws minimal quiescent current, and the device can monitor PG (power-good) signals to enforce turn-on ordering. A common pattern uses the CPLD to delay each rail by 10-50 ms via internal counter chains, ensuring downstream converters never see input voltage before their bias rails are stable. This is more reliable than discrete RC delay networks and is field-reprogrammable.

Direkomendasikan

5M160ZT100C5N · Altera 5M1270ZT144C5N · Altera
🔧

Glue Logic Replacement

Designers replace 3-8 discrete 74-series TTL/CMOS logic packages with a single 5M240ZM100C4N, reducing BOM cost and PCB area while gaining design flexibility. The 192 macrocells can implement dozens of gates, muxes, latches, and simple state machines, all re-programmable via JTAG if design changes arise. The 100-ball MBGA package (8x8 mm) fits in the footprint of 3-4 SOIC-14 packages, and the 1.8V core with multi-voltage I/O tolerates 3.3V legacy signals. The 7.5 ns tPD is fast enough for most glue-logic timing paths, and the instant-on flash configuration eliminates the boot PROM needed by SRAM-based FPGAs.

Direkomendasikan

5M240ZM100I5N · Intel 5M160ZE64C5N · Altera
🏭

Industrial Control and Motor Drive I/O

The 5M240ZM100C4N is widely used in industrial PLC and motor-drive systems for encoder input processing, PWM signal generation, and fault-logic aggregation. With 4 global clocks and deterministic 7.5 ns propagation delay, it can debounce and decode quadrature encoder signals at high RPM while simultaneously generating synchronized PWM outputs. The commercial 0C to +85C temperature range suits factory-floor enclosures, and the MBGA package withstands typical industrial shock and vibration profiles. When paired with isolation barriers and gate drivers, the CPLD provides the deterministic, low-latency logic required for safe motor commutation.

Direkomendasikan

5M240ZM100I5N · Intel 5M2210ZF256I5N · Intel
📱

Consumer Electronics and Display Interfaces

Consumer products use the 5M240ZM100C4N to bridge LCD/OLED display controllers to host processors, implement backlight dimming via PWM, and aggregate touch-panel interrupt signals. Its low static power and small 8x8 mm MBGA footprint make it attractive for handheld and wearable designs where board space and battery life are critical. The 184.1 MHz internal frequency supports pixel clock rates typical of small-form-factor LCD panels, and the multi-voltage I/O banks interface directly to 1.8V display ICs and 3.3V host SoCs without level shifters. Designers typically use Quartus Prime to implement a custom display timing controller in less than a day.

Direkomendasikan

5M160ZM68C5N · Altera 5M240ZM100C5N · Intel

Ringkasan Produk Direkomendasikan

5M160ZM100C5N Altera Digunakan di dalam: I/O Expansion and Voltage Level Shifting 5M1270ZF256C5N Altera Digunakan di dalam: I/O Expansion and Voltage Level Shifting 5M240ZM100C5N Intel Digunakan di dalam: Bus Bridging and Protocol Translation, Consumer Electronics and Display Interfaces 5M2210ZF256C5N Intel Digunakan di dalam: Bus Bridging and Protocol Translation 5M160ZT100C5N Altera Digunakan di dalam: Power-Up Sequencing and Power Management 5M1270ZT144C5N Altera Digunakan di dalam: Power-Up Sequencing and Power Management 5M240ZM100I5N Intel Digunakan di dalam: Glue Logic Replacement, Industrial Control and Motor Drive I/O 5M160ZE64C5N Altera Digunakan di dalam: Glue Logic Replacement 5M2210ZF256I5N Intel Digunakan di dalam: Industrial Control and Motor Drive I/O 5M160ZM68C5N Altera Digunakan di dalam: Consumer Electronics and Display Interfaces
What is the 5M240ZM100C4N?
The 5M240ZM100C4N is a 192-macrocell MAX V family CPLD from Intel (formerly Altera) housed in a 100-ball Micro FBGA package. It is a non-volatile, flash-based programmable logic device operating from a 1.8V core supply with up to 184.1 MHz internal frequency and approximately 7.5 ns pin-to-pin logic delay, used primarily for I/O expansion, bus bridging, and glue-logic replacement.
What is the operating voltage of 5M240ZM100C4N?
The 5M240ZM100C4N operates from a 1.71V to 1.89V core supply (1.8V nominal). Its I/O banks support multi-voltage interfacing (3.3V, 2.5V, 1.8V, and 1.5V), allowing direct connection to mixed-voltage logic domains without external level shifters, per the Intel MAX V device handbook.
Where to buy 5M240ZM100C4N online?
The 5M240ZM100C4N is in stock at authorized distributors including DigiKey (5M240ZM100C4N-ND), Mouser, and LCSC (C1556467). As of 2026-09-06, LCSC lists unit pricing from approximately $2.06; DigiKey and Mouser prices vary by quantity break. Always verify lead time before placing volume orders.
What is the price of 5M240ZM100C4N?
As of 2026-09-06, the 5M240ZM100C4N is priced from approximately $2.06 per unit at LCSC for small quantities, with volume breaks typically in the $4-8 range at DigiKey and Mouser. Pricing fluctuates with market demand and wafer availability; check the live distributor pages for current quotes.
What is the lead time for 5M240ZM100C4N?
As of 2026-09-06, the 5M240ZM100C4N ships from stock at LCSC (in stock confirmed) with same-day dispatch, while DigiKey and Mouser typically fulfill commercial orders within 2-4 weeks for production quantities. Always confirm lead time directly with the distributor at order entry.
What is the difference between 5M240ZM100C4N and 5M240ZM100C5N?
The 5M240ZM100C4N is a commercial-temperature speed-grade C4 (approximately 7.5 ns tPD), while the 5M240ZM100C5N is the C5 speed grade (approximately 5.5 ns tPD). Both share the same 192 macrocells, 1.8V core, and 100-ball MBGA package; the C5 grade offers faster logic delay at typically higher cost.
When should I choose 5M240ZM100C4N over 5M240ZM100A5N?
Choose the 5M240ZM100C4N when you need the 100-ball MBGA package at a commercial temperature grade with a relaxed C4 speed grade (lower cost). Choose the 5M240ZM100A5N if your design needs automotive-grade qualification or a wider temperature range. Both share identical 192-macrocell logic capacity and 1.8V core.
Is 5M240ZM100C4N the same as EPM240Z?
The 5M240ZM100C4N is the MAX V family successor to the legacy EPM240Z series. They share identical 192-macrocell logic capacity but differ in process node, supply voltage (MAX V uses 1.8V core vs EPM240Z's 3.3V core), and configuration memory technology. Designs migrating between the two require I/O voltage and power-rail rework.
What is the best drop-in replacement for 5M240ZM100C4N?
The best drop-in replacement is the 5M240ZM100A5N if your application only requires the commercial temperature range - same die, same 100-ball MBGA footprint, different speed grade suffix. For identical speed grade with different temperature, the 5M240ZM100I5N provides the same C5 timing but extended industrial temperature range.
Where to download the 5M240ZM100C4N datasheet PDF?
The official Intel MAX V datasheet PDF (covering all 5MxxxxZ variants including 5M240ZM100C4N) is hosted at intel.com under document mv5_5m240z.pdf. Secondary copies are available at Datasheets.com, FindIC, and Mouser's product page. Always cross-reference the Intel Quartus II / Quartus Prime pinout file for exact ball assignments.
Where to find the 5M240ZM100C4N pinout?
The pinout for the 5M240ZM100C4N 100-ball MBGA package is published in the Intel MAX V device handbook and in the Quartus Prime pinout file (after selecting the device and package). Ball A1 is located per the MBGA convention at the top-left corner when the dot marker is oriented top-left on the package top view.
What are the key specifications of 5M240ZM100C4N that engineers should know?
Key specifications of the 5M240ZM100C4N are: 192 macrocells, 240 typical logic elements, 1.71V to 1.89V core supply, 184.1 MHz maximum internal frequency, 7.5 ns pin-to-pin delay (C4 speed grade), 100-ball Micro FBGA package (8x8 mm body), commercial 0C to +85C operating range, JTAG-based in-system programmability, and on-chip flash configuration. It belongs to the Intel MAX V CPLD family.
What is the best Lattice equivalent for 5M240ZM100C4N?
The closest Lattice Semiconductor equivalent to the 5M240ZM100C4N is the ispMACH 4000V (LC4256V) family in a 100-pin TQFP or 100-ball ftBGA package. These offer 256 macrocells and 3.3V core, differing from the MAX V's 1.8V core. Verify pinout compatibility carefully using the Lattice ispLEVER / Diamond pinout files before substitution.
Is 5M240ZM100C4N suitable for industrial applications?
The 5M240ZM100C4N is rated for commercial temperature (0C to +85C) only. For industrial applications requiring -40C to +85C operation, choose the industrial-grade variant 5M240ZM100I5N instead, which shares the same 100-ball MBGA package and C5 speed grade but extends the operating temperature range.

Data referensi engineering untuk 5M240ZM100C4N — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the 5M240ZM100C4N when you need a 192-macrocell MAX V CPLD in a 100-ball MBGA package at commercial temperature (0C to +85C) and you are cost-sensitive enough to accept the C4 speed grade (~7.5 ns tPD). If your design operates below 0C or above 85C, upgrade to the 5M240ZM100I5N (industrial) or 5M240ZM100A5N (automotive). If you only need 160 macrocells, the 5M160ZM100C4N saves cost. If you need faster timing, choose any C5 suffix variant. All five candidates share the same 100-MBGA footprint, enabling PCB layout reuse across density and temperature options.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini 5M240ZM100A5N 5M240ZM100I5N 5M160ZM100C5N 5M160ZM100C4N
Brand Intel Intel Intel Intel Intel
Package 100-ball Micro FBGA (MBGA, 8x8 mm) 100-ball Micro FBGA (MBGA) 100-ball Micro FBGA (MBGA) 100-ball Micro FBGA (MBGA) 100-ball Micro FBGA (MBGA)
Macro Cells 192 192 192 160 (-17%) 160 (-17%)
Speed Grade C4 (~7.5 ns tPD) C5 (~5.5 ns tPD, +27% faster) C5 (~5.5 ns tPD, +27% faster) C5 (~5.5 ns tPD, +27% faster) C4 (~7.5 ns tPD)
Operating Temperature 0C to +85C (commercial) -40C to +125C (automotive) -40C to +85C (industrial) 0C to +85C (commercial) 0C to +85C (commercial)
Core Supply Voltage 1.71V to 1.89V (1.8V nominal) 1.71V to 1.89V 1.71V to 1.89V 1.71V to 1.89V 1.71V to 1.89V
Family MAX V MAX V MAX V MAX V MAX V

Diferensiator Kunci

  • Lowest-cost speed option in the 192-macrocell, 100-MBGA MAX V family (vs5M240ZM100C5N)
  • Same die as industrial and automotive variants, but commercial temp grade only (vs5M240ZM100I5N)
  • Higher macrocell density than the 160-Macrocell variants in the same package (vs5M160ZM100C4N)

Catatan Desain

The 5M240ZM100C4N requires two separate power rails: VCCINT (1.71V to 1.89V, 1.8V nominal) for the core logic, and VCCIO for each I/O bank. Decoupling requires at least one 0.1uF ceramic capacitor per rail placed within 5 mm of the supply pins, plus a bulk 4.7uF to 10uF tantalum or ceramic capacitor. Power-up sequencing: VCCINT must ramp monotonically to 0.9V within 1 ms; if VCCIO ramps before VCCINT, the I/O pins may drive indeterminate states. The MAX V device is tolerant of either rail coming up first per Intel's MAX V handbook.

The 100-ball Micro FBGA package uses 0.5 mm ball pitch and requires fanout via microvia or 4-mil trace/spacing PCB technology. Place a continuous ground plane on the layer directly beneath the package to provide a low-impedance return path and to limit crosstalk on high-speed I/O. Avoid routing signal traces beneath the package balls. Use the Intel-recommended land pattern (non-soldermask-defined pads) and ensure the reflow peak temperature does not exceed 245C for lead-free assembly to prevent ball collapse.

Common pitfalls when designing with the 5M240ZM100C4N include: (1) forgetting to assign JTAG pins (TMS, TCK, TDI, TDO) in the Quartus pinout file - if any are left unassigned they may float and cause boundary-scan failures; (2) exceeding the maximum I/O count per bank which varies with VCCIO voltage; (3) using the wrong speed grade suffix in the Quartus device selection, which causes the fitter to use incorrect timing models; (4) not enabling the internal pull-up resistors on unused I/O pins, which leaves inputs floating and draws extra current. Always validate the design with the Quartus timing analyzer before generating the programming file.

Informasi Konformitas

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Bebas Logam Lengket
Yes
Bebas Halogena
[Data Needed: Halogen-Free Status]
Mineral Konflik
Compliant

RoHS compliant per Intel MAX V product family declaration. Lead-free reflow compatible. Commercial temperature grade only - choose 5M240ZM100I5N for industrial grade or 5M240ZM100A5N for AEC-Q100 automotive qualification.

Data disahkan pada: 2026-09-06 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

5M240ZM100C4N 5M240ZM100C4N datasheet Intel MAX V CPLD 192 macrocells 5M240Z 100-ball MBGA CPLD MAX V 1.8V core CPLD C4 speed grade 5M240ZM100C4N price buy online 5M240ZM100C4N vs 5M240ZM100C5N 5M240ZM100C4N drop-in replacement MAX V CPLD I/O expansion bus bridge 5M240ZM100C4N pinout MBGA Altera MAX V CPLD glue logic replacement what is a MAX V CPLD used for

Komponen dan Istilah Terkait

Intel Altera 5M240ZM100C4N 5M240ZM100C5N 5M240ZM100I5N 5M240ZM100A5N 5M160ZM100C4N 5M160ZM100C5N MAX V CPLD Complex Programmable Logic Device macrocell logic element non-volatile flash configuration JTAG MBGA Micro FBGA ball grid array surface mount RoHS AEC-Q100 I/O expansion bus bridge glue logic power sequencing
Kutipan Cepat RFQ
Tim penjualan kami akan merespon dalam 24 jam
Nomor PartMfrPkgKwantitasHarga Target
×
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

Keranjang Belanja 0 item
Keranjang belanja Anda kosong
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ