Analog Devices

AD622AR - Low-Cost Instrumentation Amplifier | Analog Devices

MPN: AD622AR ✗ Akhir Hidup
8-SOIC Package
MOQ: 1 |

AD622AR Ringkasan

The Analog Devices AD622AR is a low-cost, single-circuit instrumentation amplifier in an 8-pin SOIC package. It provides differential input amplification with gains from 1 to 1000: gain 1 requires no external resistor, while gains from 2 through 1000 are established with one external gain-setting resistor. Its traditional pin configuration and complete differential-amplifier implementation make it suitable for industrial measurement, sensor conditioning, and biomedical instrumentation.

An instrumentation amplifier is a specialized amplifier family within analog signal-chain ICs. It combines input buffering, differential subtraction, and gain-setting functions in one package. Unlike a basic operational amplifier configured as a subtractor, an instrumentation amplifier offers a more controlled input structure and strong common-mode rejection, helping reject unwanted voltage common to both inputs. The AD622 is designed as a lower-cost alternative to discrete two- or three-operational-amplifier instrumentation-amplifier circuits.

The AD622AR uses one external resistor between its gain resistor pins to determine gain. The manufacturer describes gains from 2 to 1000 as externally programmable, with gain 1 available by omitting the resistor. This simple gain-setting method reduces component count and board area while preserving the familiar gain-resistor connection used by several Analog Devices instrumentation amplifiers.

Its internal design is intended to provide good common-mode rejection, improved linearity, temperature stability, reliability, and lower power and board-area consumption than typical discrete implementations. These characteristics matter when a small differential sensor signal must be amplified in the presence of a larger common-mode voltage, such as in bridge sensors, strain gauges, and low-level current measurements.

Typical applications include bridge-transducer signal conditioning, biomedical instrumentation, industrial process measurement, and low-level sensor amplification. In each case, the differential inputs accept the sensor signal while the reference input establishes the output offset around which the amplified differential result is centered. The output is intended for further conversion, filtering, processing, or display by downstream circuitry.

The principal design consideration is selecting and placing the gain-setting resistor correctly. Keep the resistor close to the gain pins, use a precision resistor with suitable temperature coefficient and absolute tolerance, and follow the pin-description and gain equations in the manufacturer datasheet. Check input common-mode range, output swing, supply voltage, and stability requirements for the intended operating conditions.

This page combines the AD622AR device function, gain-setting guidance, package and pin information, application guidance, and engineering-focused alternatives. It is designed to help engineers determine whether the part fits a signal-chain requirement and how it should be evaluated before PCB implementation.

Alternatif penggantian untuk AD622AR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian AD622AR (sama faktor bentuk dan footprint) — berbeda di dalam Package, Gain Range, Amplifier Type, RoHS Status, Number of Circuits.

Analog Devices
Package: 8-SOIC (0.154", 3.90mm Width)
Gain Range: 1 to 10,000
RoHS Status: Compliant
Bandingkan dengan AD622AR →
Analog Devices
Package: 8-pin SOIC
Amplifier Type: Single-channel instrumentation amplifier
RoHS Status: Compliant
Bandingkan dengan AD622AR →
Analog Devices
RoHS Status: Unknown
Bandingkan dengan AD622AR →
Analog Devices
Package: 8-SOIC (0.154 in, 3.90 mm width)
Gain Range: 1 to 1000+
RoHS Status: Compliant
Bandingkan dengan AD622AR →

AD622ARZ

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 8-SOIC
Single-channel instrumentation amplifier · 1 channel · 1 to 1000 · 2 to 1000 · 1 MHz · 125 µV · ±18 V · 36 V

Kontak untuk harga

Lihat Datasheet →

AD620ARZ

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 8-SOIC
Instrumentation Amplifier · 1 · 1 to 10,000 · ±2.3 V to ±18 V · 1.3 mA · 100 dB · 50 µV · 1.0 nA

Kontak untuk harga

Lihat Datasheet →

AD621ARZ

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 8-SOIC
Single-channel instrumentation amplifier · 1 circuit · 800 kHz · 1.2 V/us · 500 pA · 75 uV · Up to +/-18 V · 8-pin SOIC

Kontak untuk harga

Lihat Datasheet →

AD623ARZ-R7

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 8-SOIC
Instrumentation Amplifier · 1 · 2.7 V to 12 V · +/-2.5 V to +/-6 V · Rail-to-Rail · 800 kHz · 0.3 V/us · 90 dB (min) at G = 1

✓ Ada di Gudang

$2.65 / Satuan

Lihat Datasheet →

AD620ARZ-RL

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-SOIC
Same 8-SOIC footprint and AD620 electrical architecture, with a reel-oriented ordering suffix; its broader gain range changes the gain equation.

📋 Alternatif referensi (tidak dalam katalog)

AD622AR Rating Maksimal & Karakteristik Listrik

Amplifier Type Instrumentation amplifier
Number of Circuits 1 circuit
Gain Range 1 to 1000
Externally Set Gain Range 2 to 1000
Gain-Setting Method 1 external resistor
Gain 1 Configuration No external resistor required
Paket 8-SOIC
Package Pin Count 8 pins
Tipe Mounting Surface mount
Input Type Differential input
Status Lingkungan Hidup Obsolete

Konfigurasi Pin AD622AR

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin produk 1 RG+ — Gain-setting resistor connection
Pin produk 2 IN− — Inverting differential input
Pin produk 3 IN+ — Noninverting differential input
Pin produk 4 V− — Negative supply connection
Pin produk 5 REF — Reference input for output-voltage offset
Pin produk 6 OUT — Amplified output
Pin produk 7 V+ — Positive supply connection
Pin produk 8 RG− — Gain-setting resistor connection

Aplikasi Umum

AD622AR cocok untuk 6 aplikasis: Bridge Transducer Signal Conditioning, Industrial Process Measurement, Biomedical Instrumentation, Low-Level Current Measurement, Portable Sensor Interfaces, Data Acquisition Front Ends.

🏭

Bridge Transducer Signal Conditioning

The AD622AR fits resistive bridge sensing because it accepts a differential measurement while rejecting a larger common-mode excitation voltage. Its gain can range from 1 to 1000, allowing the bridge output to be scaled before filtering or conversion. The 8-pin SOIC package also reduces board area compared with a discrete three-operational-amplifier implementation. Use one precision resistor to establish a gain from 2 through 1000, or omit the resistor for gain 1. Verify that the bridge excitation, input common-mode level, output swing, and gain error remain within the datasheet limits.

🏭

Industrial Process Measurement

The AD622AR can amplify small differential signals produced by pressure, temperature, and flow sensors in industrial process-control systems. A gain range of 1 to 1000 provides substantial adjustment from sensor excitation level to the voltage accepted by a downstream ADC. Good common-mode rejection helps preserve the small differential component when the sensor sits on a larger process-voltage reference. Place the gain resistor close to pins 1 and 8, maintain short differential input routing, and confirm the input common-mode range and output swing against the specific sensor and supply conditions.

💊

Biomedical Instrumentation

The AD622AR is suitable for low-level biomedical measurement front ends that require differential amplification and compact implementation. Its single-circuit 8-SOIC package replaces a larger discrete instrumentation-amplifier arrangement, while the gain range of 1 to 1000 supports signal levels from small sensor outputs to larger conditioned signals. The reference input provides an output-offset function for biasing toward the system analog range. For patient-connected equipment, verify isolation, leakage, noise, safety, and applicable regulatory requirements separately; the device itself does not establish system compliance.

⚡

Low-Level Current Measurement

The AD622AR is appropriate for amplifying the small differential voltage generated by a shunt in current-measurement circuits. The 1-to-1000 gain range permits sensitive scaling of low shunt voltages, while differential input handling and common-mode rejection help distinguish the measured current from the shunt supply voltage. Connect the shunt directly across the differential inputs and use the gain resistor to establish the required amplification. Ensure the amplifier supply supports the shunt common-mode voltage and that the amplified output remains within the available output-swing range.

📱

Portable Sensor Interfaces

The AD622AR can serve as the analog front end in portable instruments and battery-powered sensor interfaces where board area is constrained. Integrating one instrumentation-amplifier circuit into an 8-pin SOIC reduces component count and assembly effort compared with discrete designs. Gain settings from 1 to 1000 allow the analog chain to match the sensor output before conversion or filtering. Because the exact supply current, input range, and output swing depend on the ordering variant, confirm those limits in the manufacturer datasheet and include the gain resistor and reference network in the power-budget analysis.

🖥️

Data Acquisition Front Ends

The AD622AR fits multichannel data-acquisition systems that require consistent differential input conditioning before an ADC. Its 8-pin SOIC format and one-resistor gain programming simplify repeated analog channels, while the broad 1-to-1000 range accommodates sensors with widely different output levels. Keep each gain resistor local to its amplifier and route the differential inputs as a compact, symmetric pair to reduce sensitivity to interference. Confirm the amplifier's settling behavior and bandwidth against the acquisition sample rate, and account for input offset and gain error during calibration.

What is the AD622AR?
The AD622AR is a low-cost, single-circuit differential instrumentation amplifier from Analog Devices in an 8-pin SOIC package. According to the Analog Devices AD622 datasheet, it replaces discrete two- or three-operational-amplifier instrumentation-amplifier designs while providing good common-mode rejection, improved linearity, temperature stability, reliability, and lower power and board-area consumption. It supports gains from 1 to 1000, with one external resistor used to set gains from 2 through 1000.
How do I set the gain of an AD622AR?
The AD622AR uses a single external resistor between its two gain-resistor pins to establish gains from 2 through 1000. According to the Analog Devices AD622 datasheet, gain 1 is obtained when no external resistor is connected. Use the gain-setting equation in the manufacturer datasheet to calculate the required resistance, then select a resistor with appropriate initial tolerance and temperature coefficient for the required gain accuracy.
What is the AD622AR pinout?
The AD622AR uses the traditional 8-pin SOIC instrumentation-amplifier arrangement: pin 1 is RG+, pin 2 is IN−, pin 3 is IN+, pin 4 is V−, pin 5 is REF, pin 6 is OUT, pin 7 is V+, and pin 8 is RG−. The Analog Devices AD622 datasheet provides the authoritative pin-description table. Confirm those assignments against the datasheet when assigning PCB nets and the gain-setting resistor.
Where can I download the AD622AR datasheet PDF?
The official AD622AR datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD622.pdf. The document describes the low-cost instrumentation amplifier, the 8-SOIC pin configuration, gain-setting arrangement, electrical characteristics, and application information. Use the Analog Devices version when establishing electrical limits because distributor-hosted copies may use different document revisions.
What can replace an AD622AR?
The closest same-family replacements to consider are the 8-pin SOIC AD620ARZ, AD621ARZ, AD623ARZ, and AD622ARZ, subject to gain-range, supply-voltage, accuracy, and reference-input checks. The AD620 family supports a different gain range, the AD621 has a different gain program, and the AD623 uses different gain resistors for lower power. An engineer should verify the complete datasheet parameter set before approving any substitution.
Is AD622ARZ a drop-in replacement for AD622AR?
The AD622ARZ can be a candidate drop-in replacement because it represents the lead-free ordering option of the AD622 family in an 8-pin SOIC package. Compatibility still depends on gain formula, supply voltage, electrical limits, temperature range, and orderable package details. Treat AD622AR, AD622ARZ, and AD622ARZ-RL as related orderable variants rather than automatically assuming every suffix is interchangeable.
AD622AR vs AD620ARZ: which is better for a bridge sensor?
Choose AD620ARZ when the design needs the broader AD620 gain range or its different gain-setting equation; consider AD622AR when its specified gain range of 1 to 1000 and simplified one-resistor configuration meet the bridge circuit requirements. Both devices use an 8-pin SOIC instrumentation-amplifier arrangement, but their accuracy, noise, offset, and gain-set equations must be compared before deciding.
AD622AR vs AD621ARZ: which should I select?
Select AD622AR when the required gain can be implemented with its 1-to-1000 range and one-resistor gain arrangement. Select AD621ARZ when its distinct gain-setting method and electrical characteristics better match the sensor and accuracy requirements. The two parts share the SOIC-8 family format, but pin behavior and gain calculation must be checked rather than treating the shared package as sufficient proof of interchangeability.
When should I choose AD622AR over an AD623-family device?
Choose AD622AR when its specified accuracy, gain range, and operating characteristics meet the circuit requirements and a familiar one-resistor gain configuration is desirable. Consider an AD623-family device when lower power or its different resistor-programming approach provides a measurable system benefit. Review supply current, gain equation, input and output range, noise, and offset because the shared 8-pin SOIC format does not make every parameter interchangeable.
Is the AD622AR suitable for low-level sensor signal conditioning?
The AD622AR is suitable for low-level differential sensor signal conditioning because it provides adjustable gain from 1 to 1000, good common-mode rejection, and improved linearity in a compact 8-pin SOIC package. Its output can drive downstream filtering or conversion stages. The input common-mode range, output swing, offset, noise, and settling behavior must remain within the required operating envelope.
How should I place the AD622AR gain resistor?
Place the AD622AR gain-setting resistor close to the RG pins and use a layout consistent with the manufacturer datasheet. Keeping the resistor short helps reduce parasitic inductance and sensitivity to board contamination. Use a precision resistor with suitable tolerance and temperature coefficient, and verify the actual gain against the device's gain-error specification rather than relying only on nominal resistance.
What are the key specifications of AD622AR that engineers should know?
The key AD622AR specifications are its single differential instrumentation-amplifier circuit, gain range of 1 to 1000, one-resistor gain setting for gains from 2 to 1000, and 8-pin SOIC package. The Analog Devices AD622 datasheet also describes good common-mode rejection and improved linearity. Supply voltage, offset, noise, bandwidth, output swing, and temperature limits should be taken directly from the datasheet for the selected ordering variant.
Does the AD622AR need an external resistor for gain 1?
No. The Analog Devices AD622 datasheet states that gain 1 requires no external resistor, while gains from 2 through 1000 are set with one external resistor. In a PCB design, leave the gain-resistor pads available so the impedance can be populated during calibration or gain selection. Always follow the datasheet schematic because alternative gain-network arrangements can apply different effective gains.
Can an AD622AR be used in a bridge-sensor measurement circuit?
Yes, the AD622AR can amplify the small differential output of a resistive bridge while rejecting much of the common-mode excitation voltage. Its differential instrumentation-amplifier topology, gain range of 1 to 1000, and good common-mode rejection suit this application. Verify the bridge excitation level, input common-mode range, output swing, gain error, and resistor-network tolerance before finalizing the circuit.
Where can I buy AD622AR and what is its price?
Use the Request a Quote form on this page to request current AD622AR availability, commercial terms, and a quotation. Because pricing and stock can change rapidly, the platform renders current commercial information separately from the technical product record. The AD622AR is identified as obsolete for the exact ordering variant, so confirm lifecycle status, alternative sourcing, and any last-time-buy considerations before releasing a production order.
What is the lead time for AD622AR?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. The exact AD622AR ordering variant is identified as obsolete, while the AD622 family remains listed in production on the manufacturer product page. A distributor showing historical inventory does not by itself establish current factory supply, so obtain a written quotation and lifecycle confirmation before planning a build schedule.

Data referensi engineering untuk AD622AR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AD622AR when the design needs a low-cost differential instrumentation amplifier with a 1-to-1000 gain range and simple one-resistor gain programming in an 8-pin SOIC package. It is a practical fit for bridge sensors, biomedical instrumentation, industrial process measurement, and low-level current sensing. Review AD622ARZ when the lead-free ordering option meets production requirements. Consider AD620ARZ when the design needs a broader gain range or different accuracy and noise characteristics, but recalculate the gain equation. Evaluate AD621ARZ when its particular gain-programming method suits the circuit, and AD623ARZ when lower power is more important than the AD622's specific configuration. For every candidate, verify the input common-mode range, output swing, offset, noise, gain error, bandwidth, supply range, temperature grade, and lifecycle status. The shared SOIC-8 footprint simplifies mechanical replacement, but it does not by itself prove electrical interchangeability.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD622ARZ AD620ARZ AD621ARZ AD623ARZ
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same 8-SOIC - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Type Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Gain Range 1 to 1000 1 to 1000 1 to 10000 1 to 1000 1 to 1000
Gain-Setting Method One external resistor; gain 1 without resistor One external resistor; gain 1 without resistor External resistor with AD620 gain equation AD621-specific gain programming AD623-specific gain resistor network
Low-Power Positioning Low-cost instrumentation amplifier Same family positioning Low-power family positioning Family positioning Low-power family positioning
Reference Input Available on pin 5 Available on pin 5 Available on pin 5 Available on pin 5 Available on pin 5

Diferensiator Kunci

  • Simplified gain programming supports 20 discrete ratios from 1 to 1000 (vsAD620ARZ)
  • Single-resistor gain setting simplifies PCB population (vsAD621ARZ)
  • Lower-power family positioning can suit battery-instrumented designs (vsAD622AR)

Catatan Desain

Route the differential inputs as a short, symmetric pair and connect the gain resistor directly between pins 1 and 8. The differential signal is especially susceptible to unequal trace impedance and nearby switching or digital return currents. Keep the input network away from high-current paths and provide a quiet ground reference to minimize conversion of common-mode disturbance into differential error.

Do not assume that every 8-pin SOIC instrumentation amplifier is interchangeable. The AD622 gain range is 1 to 1000, and gains from 2 through 1000 use one external resistor. Other members of the AD620, AD621, and AD623 families use different gain equations or resistor arrangements. Recalculate the gain and verify offset, noise, common-mode range, output swing, and supply limits before changing the installed amplifier.

Choose the gain resistor for both absolute tolerance and temperature coefficient because its variation directly contributes to gain error. Place it close to the RG pins and avoid long copper stubs. For high-rate acquisition systems, confirm the amplifier's small-signal and large-signal settling behavior against the sampling interval; the package choice alone does not establish acquisition-channel bandwidth.

Decouple each supply connection with a local ceramic capacitor and place the device's ground return into a low-impedance analog ground path. Check the positive and negative supply limits, input common-mode range, and output swing for every operating mode. If the reference input is connected to a nonzero voltage, include its current and settling requirements when sizing the surrounding network.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes were not stated for the exact AD622AR ordering variant. The AEC-Q100 field is not applicable because this is an instrumentation amplifier rather than an automotive-qualified device.

Pencarian Terkait

AD622AR datasheet AD622AR pinout AD622AR datasheet pdf AD622AR equivalent AD622AR replacement AD622AR SOIC-8 pinout AD622AR gain resistor AD622AR vs AD620ARZ AD622AR vs AD623ARZ Analog Devices AD622AR AD622AR price AD622AR stock AD622AR bridge sensor amplifier AD622AR instrumentation amplifier application circuit

Komponen dan Istilah Terkait

Analog Devices AD622 AD622AR AD622ARZ AD620ARZ AD621ARZ AD623ARZ instrumentation amplifier differential amplifier signal-chain IC analog semiconductor common-mode rejection gain-setting resistor differential input reference input bridge transducer strain gauge biomedical instrumentation industrial process measurement low-level current measurement 8-SOIC SOIC package family surface-mount package Analog Devices AD622 datasheet
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ