Analog Devices

AD623BN - Low-Cost Rail-to-Rail Instrumentation Amplifier | Analog Devices

MPN: AD623BN ✓ Aktif
2.7 V to 12 V Vdss 17 nA Id PDIP-8, plastic Package
MOQ: 1 |

AD623BN Ringkasan

Analog Devices AD623BN is a low-cost, single-channel instrumentation amplifier with rail-to-rail output swing, designed for measuring small differential signals while rejecting common-mode interference. It operates from single or dual supplies between 2.7 V and 12 V and accepts a single external resistor for gain programming. The device is packaged in an 8-pin PDIP package and is identified by the manufacturer as a single-supply, rail-to-rail instrumentation amplifier.

An instrumentation amplifier is a specialized analog IC that amplifies the voltage difference between two inputs while providing high common-mode rejection. Its internal signal path rejects interference shared by both inputs, making it more effective than a conventional operational amplifier when sensors, bridges, and measurement nodes are exposed to common-mode voltage. The AD623BN belongs to the instrumentation-amplifier hierarchy within analog signal-chain and amplifier ICs.

The AD623BN's rail-to-rail output allows the output signal to approach the supply limits, improving dynamic range in low-voltage systems. Its gain can be set with one external resistor, simplifying circuit construction compared with implementations requiring a complete feedback network. The verified product listing identifies a maximum offset of 160 uV, input bias current of 17 nA, and bandwidth of 800 kHz. These characteristics make the part relevant to bridge-based sensing and low-level differential measurements.

The architecture supports single-supply operation from 2.7 V to 12 V as well as dual-supply operation. In single-supply systems, the reference input defines the output's midpoint, while the rail-to-rail output stage preserves signal swing near the upper and lower rails. Designers should account for output settling time, input common-mode range, gain error, and power-supply rejection when selecting gain and filtering.

Typical uses include weighing and force sensing, pressure and strain measurements, current-shunt monitoring, biomedical instrumentation, industrial process control, and sensor interfaces. The 800 kHz bandwidth accommodates higher-bandwidth sensing paths, while the low offset and bias current help preserve accuracy near the measurement floor. Application filtering should remain separate from the instrumentation amplifier's gain selection.

For a new PCB, verify every pin function and supply-decoupling arrangement against the manufacturer datasheet. Keep the gain resistor close to the gain-setting pin, provide stable bypass capacitance at the supply pins, and route the differential inputs symmetrically to reduce sensitivity to unequal parasitics. The manufacturer product page and AD623 datasheet are the primary references for electrical limits, gain equations, and recommended application circuits.

This page combines the manufacturer's operating characteristics with practical design guidance, packaging details, application context, and same-footprint replacement options. It is intended to help engineers compare the AD623BN against other instrumentation amplifiers without overlooking input bias, offset, bandwidth, supply voltage, or reference-pin differences.

Alternatif penggantian untuk AD623BN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian AD623BN (sama faktor bentuk dan footprint) — berbeda di dalam Package, RoHS Status, Mounting Type, Number of Circuits, Product Type.

Analog Devices
Package: 8-PDIP
RoHS Status: Unknown
Number of Circuits: 1 circuit
Bandingkan dengan AD623BN →
Analog Devices
Package: 8-SOIC (0.154 in, 3.90 mm width)
Mounting Type: Surface Mount
Number of Circuits: 1
Bandingkan dengan AD623BN →

AD623ARZ-R7

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 PDIP-8
Instrumentation Amplifier · 1 · 2.7 V to 12 V · +/-2.5 V to +/-6 V · Rail-to-Rail · 800 kHz · 0.3 V/us · 90 dB (min) at G = 1

✓ Ada di Gudang

$2.65 / Satuan

Lihat Datasheet →

AD623ARZ-R7

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 PDIP-8
Instrumentation Amplifier · 1 · 2.7 V to 12 V · +/-2.5 V to +/-6 V · Rail-to-Rail · 800 kHz · 0.3 V/us · 90 dB (min) at G = 1

✓ Ada di Gudang

$2.65 / Satuan

Lihat Datasheet →

AD623ANZ

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 PDIP-8
Instrumentation amplifier · 1 circuit · 2.7 V to 12 V · 3 V to 12 V · Supported · Rail-to-rail · Single external gain-set resistor · 8-PDIP

Kontak untuk harga

Lihat Datasheet →

AD623BN Rating Maksimal & Karakteristik Listrik

Product Type Single-channel instrumentation amplifier
Supply Voltage Range 2.7 V to 12 V
Supply Configuration Single or dual supply
Output Swing Rail-to-rail
Gain Programming Single external gain-set resistor
Maximum Input Offset Voltage 160 uV
Input Bias Current 17 nA
Bandwidth 800 kHz
Channel Count 1 channel
Paket PDIP-8, plastic
Jumlah Pin 8 pins
Tipe Mounting Through-hole
Status RoHS Compliant

Konfigurasi Pin AD623BN

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin produk 1 RG — Gain-setting resistor connection
Pin produk 2 IN- — Inverting input
Pin produk 3 IN+ — Noninverting input
Pin produk 4 V- — Negative supply connection
Pin produk 5 REF — Reference input for output voltage
Pin produk 6 OUT — Amplified output
Pin produk 7 V+ — Positive supply connection
Pin produk 8 RG — Gain-setting resistor connection

Aplikasi Umum

AD623BN cocok untuk 6 aplikasis: Strain-Gauge Bridge Measurement, Pressure Transducer Interface, Current-Shunt Monitoring, Biomedical Sensor Signal Conditioning, Industrial Process Sensing, Portable Instrument and Test Equipment.

🏭

Strain-Gauge Bridge Measurement

The AD623BN fits strain-gauge bridges because its differential input stage measures the small bridge imbalance while rejecting the larger common-mode excitation voltage. Its 160 uV maximum input offset and 17 nA input bias current directly affect the measurable resolution, while 800 kHz bandwidth supports mechanical responses that do not require a high-speed amplifier. The device is used between the bridge and an ADC, with gain set by one resistor and the reference input defining the output level in a single-supply system. Layout symmetry around the RG pin is important because unequal parasitic capacitance and resistance can degrade CMRR. Final accuracy must also account for bridge tolerance, excitation drift, gain error, and ADC input range.

⚡

Pressure Transducer Interface

The AD623BN is appropriate for piezoresistive pressure transducers that produce a differential signal superimposed on a common-mode voltage. Instrumentation-amplifier architecture rejects much of that shared voltage, while the 800 kHz bandwidth allows the circuit to follow pressure changes with useful margin. The low 17 nA bias current limits loading of high-impedance sensor bridges, and the 160 uV offset limit defines a key contributor to full-scale measurement error. In a 5 V single-supply design, the reference input establishes the output center point. Place the gain resistor close to RG and route both sensor inputs away from switching supplies to preserve differential-signal integrity.

🔋

Current-Shunt Monitoring

The AD623BN can measure the small voltage generated by a current shunt without requiring a separate differential amplifier and output network. Its instrumentation-amplifier configuration rejects supply-related and return-path noise that appears equally on both shunt terminals. The 800 kHz bandwidth is suitable for many power-conversion monitoring loops, while the 2.7 V minimum supply permits operation from low-voltage rails. Rail-to-rail output helps retain measurement swing in compact systems, and the reference input can shift the output into an ADC-centered range. Designers must verify common-mode limits at the selected gain, account for offset and gain error, and use Kelvin routing when shunt resistance is low.

💊

Biomedical Sensor Signal Conditioning

The AD623BN can condition low-level differential signals from biomedical electrodes, temperature sensors, and impedance-monitoring circuits when the system error budget permits its offset and noise performance. Differential instrumentation amplification helps suppress physiological excitation and other common-mode signals, while the 17 nA input bias current reduces disturbance of high-impedance sources. Single-supply operation from 2.7 V to 12 V supports compact portable systems, and the reference input supports an ADC-compatible output baseline. Isolation, patient protection, frequency response, and electrode-specific safety requirements remain outside the amplifier's function. Use the manufacturer electrical limits to verify input range, output swing, and noise before selecting the gain.

🏭

Industrial Process Sensing

The AD623BN suits industrial sensor interfaces where a controller must recover a small differential measurement from a larger common-mode voltage. Its 800 kHz bandwidth is useful for process variables with moderate dynamic content, and the single external gain resistor simplifies field-selectable scaling. The rail-to-rail output supports systems that need more of the available supply range, while single- or dual-supply operation allows flexibility in 5 V and industrial control rails. For reliable operation, check the input common-mode range against bridge or transducer excitation, keep the input pair symmetric, and isolate sensitive traces from motors and relays. Offset drift, gain error, resistor tolerance, and ADC resolution usually dominate final measurement accuracy.

🖥️

Portable Instrument and Test Equipment

The AD623BN fits portable measurement equipment that uses low-voltage supplies and needs accurate differential-signal conditioning. Its 2.7 V minimum operating voltage permits compact single-supply designs, while the reference input allows the output to be biased for a mid-range ADC. The rail-to-rail output improves signal utilization, and 800 kHz bandwidth supports general-purpose instrumentation rather than only static measurements. A practical design should include local supply bypassing, careful grounding, and an input filter selected according to sensor noise and required response time. Because the gain-setting resistor and input bias current affect accuracy, the complete measurement chain should be calibrated rather than relying on nominal gain alone.

Ringkasan Produk Direkomendasikan

AD623BN Analog Devices Digunakan di dalam: Strain-Gauge Bridge Measurement, Pressure Transducer Interface, Current-Shunt Monitoring, Biomedical Sensor Signal Conditioning, Industrial Process Sensing, Portable Instrument and Test Equipment AD620 Precision bridge amplifier family Digunakan di dalam: Strain-Gauge Bridge Measurement, Pressure Transducer Interface, Current-Shunt Monitoring, Industrial Process Sensing AD8229 Low-noise instrumentation amplifier Digunakan di dalam: Biomedical Sensor Signal Conditioning, Portable Instrument and Test Equipment
What is the AD623BN and what is its main function?
The AD623BN is a single-channel, low-cost instrumentation amplifier with rail-to-rail output and single or dual-supply operation from 2.7 V to 12 V. It amplifies differential sensor signals while rejecting common-mode interference. According to the Analog Devices AD623 datasheet, gain is programmed with one external resistor, making the device suitable for bridge sensors, shunt monitors, and other low-level differential measurement systems.
What is the supply voltage range of the AD623BN?
The AD623BN operates from 2.7 V to 12 V using either a single supply or dual supplies. The Analog Devices product page identifies these limits for the AD623 family, while the AD623BN is the PDIP-8 ordering option. In a single-supply circuit, drive the reference input to establish the output reference level. In a dual-supply circuit, the reference input may be connected to ground if a ground-centered output is required.
What are the key specifications of AD623BN that engineers should know?
The AD623BN combines a 2.7 V to 12 V supply range, rail-to-rail output, 800 kHz bandwidth, 160 uV maximum input offset, and 17 nA input bias current in an 8-pin PDIP package. Analog Devices describes the device as a low-cost instrumentation amplifier whose gain is programmed by one external resistor. These characteristics make it suitable for sensitive differential measurements where input offset, bias current, and output range materially affect system accuracy.
Where can I download the AD623BN datasheet PDF?
The official AD623 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD623.pdf. It is the appropriate document for the AD623BN ordering code because the AD623BN is an PDIP-8 version of the AD623 family. Use the manufacturer's pin diagram, electrical characteristics, gain-setting equation, and typical application circuits as the controlling references during PCB and signal-chain design.
Where can I find the AD623BN pinout and connection lines?
The AD623BN pinout is documented in the AD623 datasheet under the pin descriptions and connection diagrams. The eight-pin PDIP uses a gain resistor connection, differential inputs, supply pins, reference input, and output. For PCB layout, preserve the manufacturer's differential-input orientation and place the external gain resistor close to the RG pin. The suggested search phrase 'ad623b ic connection lines minimum widths' should be treated as a layout-search aid, while the datasheet remains authoritative for pin functions.
What is the bandwidth of the AD623BN?
The AD623BN has a bandwidth of 800 kHz according to the AD623BN listing and manufacturer documentation. Bandwidth varies with the selected gain, so the 800 kHz value must not be interpreted as constant across every resistor setting. When designing a sensor interface, compare the closed-loop bandwidth with the sensor bandwidth and required settling time. Add only the filtering needed to suppress noise and preserve the intended measurement dynamics.
How is gain set on the AD623BN?
The AD623BN uses one external resistor to program its differential gain. The exact gain relationship and the allowed resistor range must be taken from the gain-setting equation in the Analog Devices datasheet. Place the resistor close to the RG pin to minimize parasitic capacitance and noise pickup. Avoid changing the gain resistor while the amplifier is operating, because the feedback network is sensitive to resistance and layout quality.
Can the AD623BN operate from a single 5 V supply?
Yes, the AD623BN can operate from a single 5 V supply because the AD623 family supports single-supply operation from 2.7 V to 12 V. In this configuration, the reference input normally establishes the output's quiescent voltage, commonly near mid-supply when suitable decoupling and signal headroom are provided. Confirm the output swing and input common-mode limits for the selected gain using the manufacturer's electrical characteristics.
What is the difference between AD623BN and AD623AR?
The AD623BN and AD623AR are both 8-pin PDIP versions of the AD623 family, and their core instrumentation-amplifier functions are closely matched. The exact ordering suffix and supported temperature grade should be confirmed against the current Analog Devices product table before substitution. For a drop-in replacement, verify pin functions, gain equation, supply limits, and the manufacturer's recommended operating area rather than relying on package shape alone.
What can replace the AD623BN?
The AD623AR and AD623ARZ are the closest same-brand candidates identified for an 8-pin PDIP replacement, while the AD623AN represents an earlier PDIP ordering option in the same family. Confirm current electrical ratings, temperature grade, lifecycle status, and pin compatibility before approving a substitution. The AD623AN should be selected only when its historical specifications satisfy the complete operating envelope, including offset, bandwidth, bias current, and supply limits.
What is the best Texas Instruments equivalent for the AD623BN?
No Texas Instruments instrumentation-amplifier equivalent is established by the available manufacturer information, so the AD623BN should not be replaced by an unspecified TI part. A valid cross-brand substitute requires the same PDIP-8 pin mapping, compatible gain equation, suitable input and output ranges, and electrical performance within the design limits. Use the Analog Devices pinout and electrical tables as the comparison baseline, then validate any candidate in the target circuit.
When should I choose the AD623BN instead of a precision instrumentation amplifier?
Choose the AD623BN when a cost-sensitive measurement path needs rail-to-rail output, flexible single or dual supplies from 2.7 V to 12 V, and one-resistor gain programming. Its 160 uV maximum offset and 800 kHz bandwidth are appropriate when the overall error budget and signal bandwidth permit those values. Select a higher-precision amplifier when offset, input bias, noise, or common-mode rejection requirements exceed the AD623BN's limits.
Is the AD623BN suitable for pressure and strain-gauge measurements?
The AD623BN is suitable for many pressure and strain-gauge front ends because it amplifies small differential bridge signals while rejecting common-mode voltage. Its 17 nA input bias current and 160 uV maximum offset are especially relevant to high-impedance bridge legs. The practical accuracy still depends on bridge excitation, resistor tolerance, lead resistance, gain error, input common-mode range, and the temperature coefficient of the complete measurement chain.
How do I minimize layout noise in an AD623BN circuit?
Minimize layout noise by keeping the gain resistor at the RG pin, placing input and output paths away from switching nodes, and routing the two differential inputs symmetrically. Supply pins should have short, low-inductance connections to local bypass capacitors, with the return path arranged to minimize shared impedance. Use a solid ground plane and keep the sensitive traces over a continuous reference plane. These measures reduce parasitic pickup and supply-to-output coupling.
Is AD623BN in stock and what is its price?
Current stock, unit pricing, and volume availability should be requested through the Request a Quote form on this page. The AD623BN listing identifies the exact Analog Devices PDIP-8 ordering code, but a current quantity and lead time must be confirmed for the required production quantity. The form is also the appropriate route for checking package readiness, scheduled delivery, and any traceability requirements.
How long is the AD623BN lead time and what is the minimum order quantity?
The current lead time and minimum order quantity for AD623BN should be confirmed through the Request a Quote form on this page. Production planning may require quantity, date code, packaging, and shipment information to be stated in the request. The verified product information confirms the PDIP-8 package identity but does not establish a universal lead time or MOQ, so both should be treated as order-specific commercial terms.

Data referensi engineering untuk AD623BN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AD623BN for cost-sensitive single- or dual-supply systems that need differential measurement, rail-to-rail output, and one-resistor gain programming. Its 800 kHz bandwidth, 160 uV maximum offset, and 17 nA input bias current are appropriate when the sensor and complete signal chain meet those limits. Select AD623AR or AD623ARZ when their current lifecycle, temperature grade, and ordering terms better fit production requirements while retaining the same PDIP-8 family implementation. Consider AD623AN only after checking its historical electrical ratings and current availability against every design constraint. A precision amplifier such as AD620 or low-noise AD8229 is preferable when the AD623BN's offset, bias current, or noise exceeds the error budget. For any substitution, verify pin mapping, gain equation, common-mode range, output swing, and lifecycle status rather than relying on package shape alone.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD623AR AD623ARZ AD623AN
Package PDIP-8 PDIP-8 - same package PDIP-8 - same package PDIP-8 - same package
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Single-channel instrumentation amplifier Single-channel instrumentation amplifier Single-channel instrumentation amplifier Single-channel instrumentation amplifier

Diferensiator Kunci

  • Rail-to-rail output from a 2.7 V minimum supply (vsAD623AN)
  • Single-resistor gain programming (vsAD623AR)
  • Verified RoHS-compliant sourcing identity (vsAD623ARZ)

Catatan Desain

Place the external gain-setting resistor directly between the two RG connections, using the shortest practical routing. Keep the IN+ and IN- paths adjacent and similarly terminated so parasitic capacitance and resistance affect both inputs equally. Avoid routing either input beneath digital clocks, relay contacts, switching-regulator inductors, or other high-impedance noise sources. A continuous ground plane beneath the sensitive analog section will generally produce a more repeatable result than a fragmented split-plane arrangement.

Place local bypass capacitance close to V+ and V- and connect it with short, low-inductance paths. The exact capacitance and whether an additional charge-pump or DC-DC supply is required depend on the gain, input common-mode voltage, and output voltage specified in the AD623 datasheet. For single-supply operation, set REF to the required output midpoint and confirm that the output and input common-mode ranges include the intended signal. Do not assume rail-to-rail output alone guarantees rail-to-rail input operation.

Treat IN+ and IN- as a coupled differential pair from the sensor or bridge through to the amplifier. Keep their geometry and surrounding ground references symmetrical, and terminate unused channels according to the manufacturer's guidance when multiplexing several sensors. Use filtering that suppresses out-of-band noise without unnecessarily reducing the 800 kHz signal bandwidth. For very low source impedances, check the gain resistor network and input protection arrangements against the AD623 datasheet before adding external capacitance.

Do not select the AD623BN solely from its 800 kHz headline bandwidth because closed-loop bandwidth changes with gain, and its 160 uV offset can dominate a small-signal measurement. Verify input common-mode range, output swing, reference-pin behavior, supply current, and temperature grade against the complete measurement range. Also confirm that the selected PDIP-8 alternative has the same pin functions and gain equation; identical package dimensions alone do not guarantee drop-in compatibility.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

RoHS compliance is identified by the LCSC product listing. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is established by the available manufacturer information.

Data disahkan pada: 2026-11-09 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

AD623BN datasheet AD623BN datasheet pdf AD623BN pinout AD623BN connection lines AD623BN minimum widths AD623BN PDIP-8 pinout AD623BN drop-in replacement AD623BN vs AD623AR AD623BN equivalent amplifier AD623BN price AD623BN stock Analog Devices AD623BN AD623BN 800kHz amplifier AD623BN strain gauge circuit AD623BN reference input circuit

Komponen dan Istilah Terkait

Analog Devices AD623BN AD623AR AD623ARZ AD623AN AD620 AD8229 instrumentation amplifier differential amplifier analog signal chain amplifier IC semiconductor rail-to-rail output common-mode rejection CMRR input offset voltage input bias current bandwidth gain-set resistor PDIP-8 DIP-8 through-hole package RoHS strain-gauge bridge
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ