Analog Devices

AD624CDZ - 25 MHz Precision Instrumentation Amplifier | Analog Devices

MPN: AD624CDZ ✓ Aktif
25 uV Vdss 15 nA Id 16-CDIP (0.300 in, 7.62 mm) Package
MOQ: 1 |

AD624CDZ Ringkasan

The Analog Devices AD624CDZ is a single-channel, high-precision instrumentation amplifier with a 25 MHz gain-bandwidth product, 5 V/us slew rate, and 15 us settling time, packaged in a 16-lead ceramic DIP. It is designed for low-level transducer signals where accurate gain, low noise, and fast settling are more important than absolute size. Internal trim resistors establish accurate gains of 1, 100, 200, 500, and 1000 without external components, while the internal gain-set resistor remains accessible for other gain values.

An instrumentation amplifier is a specialized amplifier category optimized for differential signals originating from sensors such as load cells, strain gauges, and pressure transducers. Its internal three-amplifier architecture provides high input impedance, common-mode rejection, and precise gain setting without requiring matched external resistors. Within the signal-chain hierarchy, an instrumentation amplifier belongs to the amplifier family and ultimately to the broader category of analog signal-conditioning integrated circuits.

The AD624CDZ combines a 25 MHz gain-bandwidth product with internal trim networks for gains of 1, 100, 200, 500, and 1000. The manufacturer identifies the device as a high-precision, low-noise instrumentation amplifier with an outstanding combination of noise performance, gain accuracy, low gain temperature coefficient, and linearity. These characteristics support high-resolution data-acquisition systems in which the transducer output is small and the useful signal occupies only a small portion of the amplifier's full-scale capability.

Fast analog performance makes the AD624 useful beyond slow process-control loops. The 5 V/us slew rate allows large input steps to be followed without excessive settling delay, and the 15 us settling specification supports high-speed measurement systems. Because the AD624 uses internal trim resistors, its factory-calibrated gain behavior avoids the resistor-matching errors that normally appear in discrete instrumentation-amplifier implementations. Users can still select intermediate gains with an external resistor placed across the gain-set terminals.

Typical applications include load-cell and strain-gauge measurement bridges, industrial pressure transducers, high-resolution data acquisition, medical instrumentation, and instrumentation-amplifier input stages for precision converters. The 16-lead ceramic DIP package supports conventional through-hole assembly and is appropriate where long service life and temperature stability are more important than surface-mount area reduction.

When laying out the circuit, place the AD624 close to the sensor bridge and route the differential sensor inputs as a short, symmetric pair to minimize pickup from switching nodes. Avoid long parallel runs beneath high-current or high-voltage traces, and use a shield or guard strategy when the transducer leads are long. Verify the input common-mode range, supply voltage, output swing, and gain-set resistor value against the manufacturer datasheet before finalizing the circuit.

This page combines manufacturer performance data, package information, application engineering guidance, and a structured comparison of compatible AD624 family members. It is intended to help engineers select a suitable gain setting, plan the layout, and evaluate replacement options without relying on a distributor summary alone.

Alternatif penggantian untuk AD624CDZ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian AD624CDZ (sama faktor bentuk dan footprint) — berbeda di dalam Package, Input Offset Voltage, Mounting Type, Settling Time, Slew Rate.

Analog Devices
Package: 16-lead ceramic DIP (CDIP)
Input Offset Voltage: 200 µV
Settling Time: 15 µs
Analog Devices
Package: 16-CDIP (0.300 inch, 7.62 mm)
Input Offset Voltage: 200 uV
Mounting Type: Through Hole
Bandingkan dengan AD624CDZ →
Analog Devices
Package: 16-lead ceramic DIP
Input Offset Voltage: 75 µV
Mounting Type: Through-hole
Bandingkan dengan AD624CDZ →

AD624CZ

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-CDIP (0.300 in, 7.62 mm)
Same AD624 16-CDIP architecture and trimmed-gain structure; suffix-specific temperature and accuracy grade must be confirmed (-0% gain error difference only where the order code permits)

📋 Alternatif referensi (tidak dalam katalog)

AD624BDZ

✅ Drop-In
Analog Devices
📦 16-CDIP (0.300 in, 7.62 mm)
Precision instrumentation amplifier · 1 circuit · 25 MHz · 5 V/µs · 15 µs · 75 µV · ±6 V to ±18 V · 1, 100, 200, 500, and 1000

Kontak untuk harga

Lihat Datasheet →

AD624ARZ

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-CDIP (0.300 in, 7.62 mm)
Same AD624 electrical architecture and 16-lead DIP footprint; plastic package construction replaces ceramic, changing thermal and mechanical characteristics

📋 Alternatif referensi (tidak dalam katalog)

AD624SDZ

✅ Drop-In
📦 16-CDIP (0.300 in, 7.62 mm)
Same AD624 family and DIP organization; S-grade suffix specifies a different package or temperature ordering option that must be checked before substitution

📋 Alternatif referensi (tidak dalam katalog)

AD624CD

✅ Drop-In
Analog Devices
📦 16-CDIP (0.300 in, 7.62 mm)
Precision instrumentation amplifier · 1 circuit · 16-CDIP ceramic · 0.2 V p-p at 10 Hz · 5 ppm maximum · 0.001% maximum through gain 200 · 130 dB minimum at 1 kHz · 25 microvolts maximum

Kontak untuk harga

Lihat Datasheet →

AD624CDZ Rating Maksimal & Karakteristik Listrik

Amplifier Type Precision instrumentation amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 25 MHz
Slew Rate 5 V/us
Settling Time 15 us
Factory-Trimmed Gains 1, 100, 200, 500, and 1000
Internal Gain-Set Resistor Present; external resistor supported for other gains
Input Bias Current 15 nA
Offset Voltage 25 uV
Noise Bandwidth 1 MHz
Paket 16-CDIP (0.300 in, 7.62 mm)
Tipe Mounting Through-hole ceramic DIP
Jumlah Pin 16 pins
Status RoHS Compliant

AD624CDZ 16-cdip (0.300 in, 7.62 mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk AD624CDZ (16-cdip (0.300 in, 7.62 mm) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 16-cdip (0.300 in, 7.62 mm) untuk AD624CDZ

Tidak ada data diatribut pin yang tersedia untuk AD624CDZ.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

AD624CDZ cocok untuk 6 aplikasis: Load-Cell Weighing Systems, Strain-Gage Transducer Front Ends, Industrial Pressure Transducer Measurement, High-Resolution Data Acquisition, Medical Instrumentation Signal Conditioning, Laboratory Sensor Instrumentation.

🏭

Load-Cell Weighing Systems

The AD624CDZ fits the input stage of a precision weighing system because its differential architecture can amplify the small bridge imbalance produced by a load cell. Its factory-trimmed gains of 1, 100, 200, 500, and 1000 cover common transducer sensitivities while limiting gain-setting errors. The 25 MHz gain-bandwidth product and 15 us settling time allow rapid acquisition, although practical weighing systems are usually limited by mechanical resonance and sensor noise rather than amplifier speed. Place the amplifier close to the bridge, keep input traces paired and away from motor and switching circuits, and confirm that the bridge excitation voltage remains within the amplifier's input common-mode range.

📊

Strain-Gage Transducer Front Ends

The AD624CDZ is well suited to strain-gage bridges because it combines low input bias current, precise internal gain settings, and high linearity for extracting small resistance changes from a differential sensor output. A gain of 100 or 500 can amplify a millivolt-level bridge signal while retaining useful bandwidth within the AD624's 25 MHz gain-bandwidth product. Use a regulated bridge excitation source and route the two bridge returns as a tightly coupled differential pair. The design should also include sensor-lead protection and shielding when the gauge is physically separated from the amplifier.

🏭

Industrial Pressure Transducer Measurement

A resistive pressure bridge feeding the AD624CDZ benefits from the amplifier's high input impedance and internal gain trim networks. The 1, 100, 200, 500, and 1000 gain options allow the signal chain to be scaled without closely matched external resistors, improving consistency across production units. The 5 V/us slew rate supports recovery from sensor or input-connection transients, but the output must remain within the device's specified swing. Apply input clamping for long external sensor cables and place filtering close to the AD624 so that common-mode transients do not reach the input terminals.

🖥️

High-Resolution Data Acquisition

The AD624CDZ can serve as the analog front end of a high-resolution acquisition channel when the source produces a low-level differential voltage. Its 25 MHz gain-bandwidth product and 15 us settling time provide ample margin for sampling systems operating below the amplifier's small-signal bandwidth limit. The instrumentation-amplifier configuration simplifies the input stage by providing high impedance and accurate gain in one package. For a complete acquisition design, select an ADC with an input range matched to the AD624 output, keep the analog trace short between amplifier and converter, and evaluate settling against the required sampling interval.

💊

Medical Instrumentation Signal Conditioning

The AD624CDZ can amplify differential bioelectrical or resistive-sensor signals when the design requires a precise, high-impedance input and a selectable factory-trimmed gain. Gain settings of 1, 100, 200, 500, and 1000 provide useful scaling for millivolt-level sources, while the 15 nA input bias current helps limit loading of high-source-impedance sensors. Because the AD624CDZ is a general-purpose amplifier rather than a medical-certified component, compliance must be established at the finished-system level. Use patient-protection networks, isolation requirements, and electromagnetic-compliance measures appropriate to the intended equipment.

🔬

Laboratory Sensor Instrumentation

The AD624CDZ is appropriate for laboratory measurement systems that combine interchangeable sensors with accurate gain settings. The internal trimmed-resistor options reduce calibration drift caused by external resistor mismatch, and the 1 V to 1000 V gain selections cover both large and small sensor outputs. Its 25 MHz bandwidth also makes it useful in pulsed or dynamic experiments where the measured signal must settle quickly. Configure the gain for the smallest value that keeps the output within the converter range, and use a warm-up period when high-resolution measurements depend on temperature stability.

What is the AD624CDZ instrumentation amplifier?
The AD624CDZ is a single-channel, high-precision, low-noise instrumentation amplifier from Analog Devices. According to the Analog Devices AD624 datasheet, it provides a 25 MHz gain-bandwidth product, a 5 V/us slew rate, and a 15 us settling time. It is optimized for differential low-level signals from load cells, strain gauges, and pressure transducers, and it uses factory-trimmed internal resistors for accurate gains of 1, 100, 200, 500, and 1000 without external gain-setting components.
What is the AD624CDZ gain-bandwidth product and slew rate?
The AD624CDZ has a 25 MHz gain-bandwidth product and a 5 V/us slew rate. The Analog Devices product page identifies these figures as the basis for high-speed data-acquisition performance. The 25 MHz gain-bandwidth product determines how much closed-loop bandwidth remains at a selected gain, while the 5 V/us slew rate limits how quickly the output can follow a large voltage step. These specifications make the device suitable for precision sensor front ends that must resolve small changes rapidly.
Which gains are factory trimmed in the AD624CDZ?
The AD624CDZ provides trimmed gains of 1, 100, 200, 500, and 1000 without external components. The Analog Devices AD624 datasheet identifies these as the exact internal-resistor gain settings. An external resistor connected across the gain-set terminals can be used when an intermediate gain is required, allowing a single device to serve systems with different transducer sensitivities. Board layouts should reserve access to the gain terminals even when a factory-trimmed gain is selected.
Where can I download the AD624CDZ datasheet PDF?
The official AD624CDZ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD624.pdf. The document contains the electrical characteristics, gain-setting arrangement, application information, and package drawings for the AD624 family. Use the manufacturer document for pin assignments, absolute maximum ratings, recommended operating conditions, and input common-mode limits before laying out a new circuit.
Where can I find the AD624CDZ pinout?
The authoritative AD624CDZ pin assignments are shown in the pin-configuration and package-drawing sections of the Analog Devices AD624 datasheet. The AD624CDZ is a 16-lead ceramic DIP, so the schematic symbol and physical footprint must follow the manufacturer's pin numbering exactly. Use the pin-description table in the datasheet when assigning PCB tracks, especially for supply connections, differential inputs, output, and the gain-set terminals.
How does the AD624CDZ compare with the AD624BDZ?
The AD624CDZ and AD624BDZ belong to the same Analog Devices AD624 instrumentation-amplifier family and use the same 16-lead ceramic DIP footprint. The principal selection consideration is the device grade and its associated operating-temperature and accuracy limits. According to the manufacturer ordering information for the AD624 family, suffix coding identifies the package, temperature grade, and accuracy grade. Select the grade required by the end equipment rather than assuming every AD624 ceramic-DIP variant has identical qualification.
When should I choose the AD624CDZ instead of another AD624 package?
Choose the AD624CDZ when a 16-lead ceramic DIP, factory-trimmed precision gains, and a 25 MHz gain-bandwidth product are required for a through-hole design. A plastic-DIP family member may be appropriate when mechanical shock, temperature range, or long service life is less critical, while the ceramic CDIP variant is generally preferable for demanding instrumentation. Confirm the exact operating-temperature range, supply requirements, and accuracy grade in the Analog Devices datasheet before approving a substitution.
Is the AD624CDZ suitable for load-cell and strain-gauge measurement?
Yes, the AD624CDZ is specifically suited to load cells, strain gauges, and pressure transducers that produce small differential signals. The Analog Devices AD624 datasheet identifies this transducer application as a primary use case, supported by low noise, high gain accuracy, low gain temperature coefficient, and high linearity. In practice, keep the bridge excitation and differential signal path free from switching noise, and verify the transducer excitation voltage and output common-mode range against the amplifier's operating limits.
What is the best drop-in replacement for the AD624CDZ?
The closest drop-in replacement must retain the same 16-lead ceramic DIP footprint, pin assignment, supply requirements, and gain-set arrangement. AD624 family members such as AD624CZ, AD624BDZ, AD624ARZ, and AD624SD are the relevant starting points for comparison, but their suffix codes can indicate different package materials, temperature grades, and accuracy grades. Treat AD624BDZ as a candidate only after confirming that its temperature range and specified accuracy satisfy the original circuit requirements.
Can AD624BZ replace AD624CDZ directly in an existing design?
An AD624BZ-family member may be physically close to the AD624CDZ, but a direct substitution requires verification of pinout, package dimensions, supply voltage, common-mode range, gain accuracy, and temperature grade. The AD624CDZ uses a 16-lead ceramic DIP, so a plastic-DIP substitute changes the mechanical and environmental profile even if the signal pins align. Obtain the ordered part data for the exact suffix before treating it as a drop-in replacement in a production design.
What can replace an AD624CDZ instrumentation amplifier?
An AD624-series device is the first replacement category to evaluate because it can preserve the amplifier's trimmed-gain architecture and 16-lead DIP organization. Start with AD624CZ, AD624BDZ, AD624ARZ, and AD624SD, then compare their order codes and electrical limits with the original circuit. The replacement must also meet the required gain accuracy, input common-mode range, supply voltage, bandwidth, and environmental grade; a matching footprint alone does not guarantee equivalent performance.
How much current does the AD624CDZ input stage draw?
The listed input bias current for the AD624CDZ is 15 nA. Low input bias current is important when the source impedance is high because it limits the voltage error created across the source impedance and helps preserve differential-signal accuracy. In bridge and strain-gauge circuits, verify the complete source-impedance budget rather than relying only on the amplifier specification. The Analog Devices datasheet should be consulted for the full input-bias-current test conditions and temperature behavior.
How much heat does an AD624CDZ dissipate at 5 V?
Estimated: using the maximum supply voltage of 5 V, a 5 V/us slew-rate assumption, and the device's operating current from the manufacturer data, power dissipation equals supply voltage multiplied by supply current. The actual operating current and supply voltage must be taken from the final circuit because input-signal amplitude and load current determine the switching activity. Confirm the result with a thermal measurement on the assembled ceramic DIP rather than relying on a nominal calculation.
Where can I buy AD624CDZ online and what is its current lead time?
Use the Request a Quote form on this page to request current AD624CDZ pricing, stock confirmation, and lead time directly from XAIPART. The manufacturer product page and authorized distributor listings identify the part as a 16-lead ceramic-DIP instrumentation amplifier, but market conditions and lot availability change continuously. Provide the required quantity, target delivery date, and acceptable packaging format with the quote request to obtain an actionable supply commitment.
What are the key specifications of AD624CDZ that engineers should know?
The AD624CDZ is a 1-circuit instrumentation amplifier with a 25 MHz gain-bandwidth product, 5 V/us slew rate, 15 us settling time, and factory-trimmed gains of 1, 100, 200, 500, and 1000. It comes in a 16-CDIP package measuring 0.300 in wide and 7.62 mm in length. Analog Devices specifies it for low-level transducer front ends, including load cells, strain gauges, and pressure transducers, where gain accuracy, low noise, linearity, and fast settling are critical.

Data referensi engineering untuk AD624CDZ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AD624CDZ when the design needs a low-noise differential input stage with accurate preset gains and a 16-lead ceramic DIP package. It is especially appropriate for load cells, strain gauges, and pressure transducers where factory-trimmed gain settings of 1, 100, 200, 500, and 1000 reduce calibration variation. The AD624 family's 25 MHz bandwidth, 5 V/us slew rate, and 15 us settling time also make it suitable for dynamic acquisition when the overall sample rate requires fast recovery. Consider AD624CZ when a different order-code grade is confirmed suitable, and AD624BDZ only after checking its temperature and accuracy grade. AD624ARZ and AD624SDZ share the general DIP organization but may differ in package material or ordering characteristics. For any proposed substitute, verify pinout, supply requirements, common-mode range, gain accuracy, temperature grade, and output swing rather than relying on the 16-lead footprint alone.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD624CZ AD624BDZ AD624ARZ AD624SDZ AD624CD
Package 16-CDIP (0.300 in, 7.62 mm) 16-CDIP (0.300 in, 7.62 mm) - same footprint 16-CDIP (0.300 in, 7.62 mm) - same footprint 16-CDIP (0.300 in, 7.62 mm) - same footprint 16-CDIP (0.300 in, 7.62 mm) - same footprint 16-CDIP (0.300 in, 7.62 mm) - same footprint
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Type Precision instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Gain-Bandwidth Product 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz
Slew Rate 5 V/us 5 V/us 5 V/us 5 V/us 5 V/us 5 V/us
Factory-Trimmed Gains 1, 100, 200, 500, and 1000 1, 100, 200, 500, and 1000 1, 100, 200, 500, and 1000 1, 100, 200, 500, and 1000 1, 100, 200, 500, and 1000 1, 100, 200, 500, and 1000
Settling Time 15 us 15 us 15 us 15 us 15 us 15 us

Diferensiator Kunci

  • Factory-calibrated high-gain options eliminate external resistor matching (vsAD624BDZ)
  • High-speed performance for dynamic sensor signals (vsAD624CZ)
  • Single-package differential conditioning (vsAD624ARZ)

Catatan Desain

Route the two sensor inputs as a short, symmetric differential pair and connect the sensor-side return directly to the amplifier input reference. Keep the AD624 close to the transducer or bridge so that the high-impedance input node is not exposed to long traces that can pickup switching noise. Avoid placing the input pair beneath motor, relay, clock, or high-current power routing. For cables longer than a few centimeters, use twisted sensor wiring and evaluate the input common-mode range before adding protection components.

Select the lowest gain that keeps the expected signal within the AD624 output range. Each decade of gain reduces closed-loop bandwidth in proportion to the 25 MHz gain-bandwidth product, so the 15 us settling specification should be checked against the system's acquisition interval. Decouple the supply pins at the device and preserve a short return path to the circuit reference. If the gain-set terminals are exposed on the board, keep them clean and away from high-voltage switching nodes because the internal resistor provides the precision gain path.

Do not treat every AD624 suffix as electrically identical. The AD624CDZ ordering code identifies a particular package and device grade, while related AD624 variants may use a different package material, temperature grade, or accuracy grade. Before substitution, compare the manufacturer ordering table for pinout, supply voltage, common-mode range, gain accuracy, and temperature rating. Also verify the external gain resistor value against the AD624 gain equation; an incorrect resistor can place the circuit far from the intended gain and reduce usable headroom.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

RoHS compliance is indicated in the LCSC product listing. No AEC-Q100 qualification is indicated for this general-purpose instrumentation amplifier.

Data disahkan pada: 2026-11-18 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

AD624CDZ datasheet AD624CDZ pinout AD624CDZ datasheet pdf AD624CDZ equivalent AD624CDZ drop-in replacement AD624CDZ vs AD624BDZ AD624CDZ price AD624CDZ stock AD624 16 CDIP instrumentation amplifier AD624CDZ load cell amplifier AD624CDZ strain gauge front end AD624 25 MHz gain bandwidth Analog Devices AD624CDZ

Komponen dan Istilah Terkait

Analog Devices AD624CDZ AD624 AD624CZ AD624BDZ AD624ARZ AD624SDZ AD624CD instrumentation amplifier precision amplifier analog signal-conditioning IC differential amplifier gain-bandwidth product slew rate settling time factory-trimmed gain common-mode rejection load cell strain gauge pressure transducer 16-CDIP ceramic DIP through-hole package high-resolution data acquisition RoHS
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ