Analog Devices

AD7450ARM - 12-Bit 1 MSPS Differential SAR ADC | Analog Devices

MPN: AD7450ARM ✗ Akhir Hidup
3 V to 5 V Vdss 8-MSOP, 0.65 mm pitch, 3.00 mm width Package
MOQ: 1 |

AD7450ARM Ringkasan

The Analog Devices AD7450ARM is a 12-bit, high-speed, low-power successive-approximation analog-to-digital converter with a fully differential analog input, a maximum throughput of 1 MSPS at 5 V, and an 8-MSOP package. The converter operates from a single 3 V or 5 V supply and accepts an external reference voltage ranging from 100 mV to 3.5 V, depending on the supply voltage and application requirements. Its differential input architecture is suited to precision signal acquisition where the converter must resolve a small voltage difference between two analog nodes.

A SAR analog-to-digital converter, commonly abbreviated as successive-approximation ADC, performs conversion by successively approximating the unknown input voltage with a controlled internal voltage. The AD7450 belongs to the ADC hierarchy and ultimately falls within the broader category of data-conversion and signal-processing semiconductors. Unlike flash converters, a SAR ADC generally combines lower power consumption with adequate resolution and conversion speed for industrial measurement, instrumentation, communications, and control applications.

The principal features of the AD7450ARM include 12-bit resolution, one fully differential analog input, operation from a 3 V or 5 V supply, and throughput rates of up to 833 kSPS at 3 V or 1 MSPS at 5 V. Its low-noise, wide-bandwidth differential track-and-hold amplifier supports acquisition of rapidly changing analog signals. The external reference input can be adjusted over a 100 mV to 3.5 V range, providing flexibility in matching the converter to the signal chain, excitation voltage, or system reference.

Because the architecture is fully differential, the input voltage is represented by the difference between two input nodes. This supports rejection of common-mode interference when the signal source and converter are properly interfaced. The differential track-and-hold stage acquires the input before conversion, while the SAR conversion process produces a 12-bit digital result. The 1 MSPS maximum rate is particularly useful for sampling waveforms, industrial transducer outputs, and multiplexed analog systems that require deterministic periodic sampling without the power and complexity associated with much faster high-resolution converters.

Typical applications include industrial process monitoring, sensor-interface and instrumentation systems, communications infrastructure, data-acquisition modules, and embedded measurement equipment. In a sensor interface, the differential input can accept the output of a bridge or instrumentation amplifier while rejecting common-mode voltage. In communications equipment, the converter can sample intermediate-frequency or envelope signals when the required bandwidth and resolution match the application.

A key design consideration is the relationship among input bandwidth, supply voltage, reference voltage, and conversion rate. The analog input must satisfy the signal-range and settling requirements described by the manufacturer datasheet, while the selected reference voltage determines the full-scale conversion range. Layout should keep analog input traces short, provide a quiet ground path, and place decoupling capacitors close to the supply pins to minimize conversion disturbance.

This product page combines the AD7450ARM electrical identity, package information, lifecycle status, practical application guidance, and verified drop-in alternatives. It also distinguishes the original AD7450 from the AD7450A family and clarifies the significance of the ARM ordering code, tube packaging, and obsolete-part replacement considerations for engineers maintaining or redesigning existing analog-to-digital converter boards.

Alternatif penggantian untuk AD7450ARM — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian AD7450ARM (sama faktor bentuk dan footprint) — berbeda di dalam Packaging, Resolution.

Analog Devices
Packaging: Tape & Reel (REEL = 2,500 pcs; REEL7 = 1,000 pcs)
Resolution: 12 bits
Bandingkan dengan AD7450ARM →

AD7450ARMZ

✅ Drop-In
📦 8-MSOP
Same documented 12-bit, single-input SAR ADC and 8-MSOP package; ordering suffix differs, so lifecycle, packaging, and lead-finish details require confirmation.

📋 Alternatif referensi (tidak dalam katalog)

AD7450ARZ-REEL

✅ Drop-In
Analog Devices
📦 8-MSOP
12 bits · SAR (Successive Approximation) · 1 · Differential (Pseudo-Differential option) · -2 V to +2 V (VREF = 2.5 V, VDD = 5 V) · 1 MSPS @ VDD=5V; 833 kSPS @ VDD=3V · 2.7 V to 5.25 V (single supply) · 100 mV to 3.5 V (external)

Kontak untuk harga

Lihat Datasheet →

AD7450ARM Rating Maksimal & Karakteristik Listrik

Resolusi 12 bit
Converter Architecture Successive-approximation SAR
Input Type Fully differential analog input
Number of Analog Inputs 1 input
Maximum Throughput at 5 V 1 MSPS
Maximum Throughput at 3 V 833 kSPS
Supply Voltage Range 3 V to 5 V
Supply Configuration Single supply
External Reference Voltage Range 100 mV to 3.5 V
Input Stage Low-noise, wide-bandwidth differential track-and-hold amplifier
Rentang Suhu Kerja -40°C to +85°C
Paket 8-MSOP, 0.65 mm pitch, 3.00 mm width
Tipe Mounting Surface mount
Packaging Tube
Status Lingkungan Hidup Obsolete
Export Control Classification Number EAR99

AD7450ARM 8-msop, 0.65 mm pitch, 3.00 mm width Diamant Konfigurasi Panduan

Konfigurasi pin untuk AD7450ARM (8-msop, 0.65 mm pitch, 3.00 mm width pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-msop, 0.65 mm pitch, 3.00 mm width untuk AD7450ARM

Tidak ada data diatribut pin yang tersedia untuk AD7450ARM.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

AD7450ARM cocok untuk 6 aplikasis: Industrial Sensor Acquisition, Data Acquisition Modules, Communications Signal Sampling, Waveform Monitoring, Test and Measurement Instruments, Condition Monitoring Systems.

🏭

Industrial Sensor Acquisition

The AD7450ARM suits industrial sensor systems that need direct differential digitization with 12-bit resolution. Its fully differential input can receive the output of a bridge, instrumentation amplifier, or current-to-voltage stage while rejecting common-mode voltage present on both sensor lines. At a 5 V supply, conversion can proceed at up to 1 MSPS, allowing the controller to sample multiple channels sequentially or capture process variables at a useful control-loop rate. The 3 V option provides 833 kSPS throughput when lower supply power is more important. Designers must verify the input common-mode range, source settling time, and available signal span against the manufacturer datasheet. Proper grounding, analog filtering, and short input routing are essential because industrial sensor cables can introduce interference before the signal reaches the ADC.

📊

Data Acquisition Modules

The AD7450ARM provides a compact conversion front end for compact data-acquisition equipment that accepts analog voltage measurements and outputs a 12-bit digital code. A 5 V implementation can sample at 1 MSPS, while a 3 V implementation can sample at 833 kSPS, making the part useful for portable and embedded measurement systems. The single differential input allows the module to use a balanced source without requiring a separate analog switch when only one channel must be converted. External reference voltage can be varied from 100 mV to 3.5 V, allowing the converter range to be matched to transducer excitation and signal-conditioning output. Practical designs should use a low-noise reference, local supply bypassing, and an input driver whose settling behavior supports the selected sample rate.

🌐

Communications Signal Sampling

The AD7450ARM can sample communication signals when 12-bit resolution and a maximum rate of 1 MSPS at 5 V are sufficient. Its differential track-and-hold amplifier is well matched to balanced IF, envelope, or demodulator outputs that are centered on a common-mode voltage. The architecture reduces sensitivity to shared noise on the two input lines, provided the source remains within the permitted common-mode range and develops the required differential voltage during the acquisition interval. Designers should insert an appropriate anti-alias or channel-selection filter and account for reference-voltage noise before converting. Interface timing to a microcontroller or DSP must follow the serial data specification from the manufacturer datasheet, including clock polarity, conversion timing, and the relationship between acquisition and conversion commands.

📈

Waveform Monitoring

The AD7450ARM is useful for waveform monitoring, envelope detection, and periodic signal analysis in instrumentation that does not require sampling rates above 1 MSPS. A 5 V supply supports 1 MSPS throughput, allowing a control system to capture 12-bit samples of repetitive analog waveforms for amplitude, peak, RMS, or spectral analysis. The differential input can accept a balanced probe or instrumentation-amplifier output and reduce common-mode pickup. When the monitored signal is not centered within the permitted input range, the external reference can be adjusted from 100 mV to 3.5 V to match the measurement span. The acquisition chain should include anti-alias filtering, controlled source impedance, and careful grounding to avoid injecting noise that masks the 12-bit resolution.

🔬

Test and Measurement Instruments

The AD7450ARM can form the measurement stage of a compact test instrument or programmable signal measurement system. Its 12-bit resolution balances conversion accuracy against implementation complexity, while the 1 MSPS maximum rate at 5 V supports fast source characterization and repetitive sampling. The differential input provides flexibility when the measured quantity is produced by a balanced bridge or active probe. The external reference range of 100 mV to 3.5 V allows the instrument to select a suitable conversion scale, although reference noise and temperature drift directly affect measurement stability. Use a quiet reference source, local high-frequency decoupling, and careful separation between analog sampling traces and digital serial-interface routing to preserve usable measurement accuracy.

⚙️

Condition Monitoring Systems

The AD7450ARM fits condition-monitoring and predictive-maintenance systems that digitize vibration, current, pressure, or temperature-derived analog signals. Differential sampling is advantageous when the sensor interface includes an instrumentation amplifier, because the converter responds to the signal difference rather than the full common-mode voltage. The 833 kSPS rate at 3 V or 1 MSPS rate at 5 V is suitable for periodic envelopes and moderate-bandwidth waveforms. In a field-installed system, filtering and protection should be placed ahead of the ADC to prevent transients from exceeding the input limits. The design must also account for the temperature-dependent behavior of the external reference and verify the available analog input span for the expected operating range of the monitored equipment.

What is the AD7450ARM?
The AD7450ARM is a 12-bit, high-speed, low-power successive-approximation ADC with one fully differential analog input. According to the Analog Devices AD7450 product information, it operates from a single 3 V or 5 V supply, supports throughput up to 833 kSPS at 3 V or 1 MSPS at 5 V, and is packaged in an 8-MSOP. Its differential track-and-hold input stage is intended for measuring small voltage differences while rejecting common-mode disturbance.
What is the conversion speed of AD7450ARM?
The AD7450ARM converts at up to 1 MSPS when operated from a 5 V supply and up to 833 kSPS from a 3 V supply. Analog Devices identifies the AD7450 as a 12-bit SAR converter, so each completed conversion contains 4096 discrete codes. Designers should select the supply voltage according to the required sampling rate and verify input settling requirements in the manufacturer datasheet before fixing the acquisition bandwidth.
Where can I download the AD7450ARM datasheet PDF?
The official AD7450ARM datasheet can be obtained through the Analog Devices AD7450 product page at https://www.analog.com/en/products/ad7450.html. The product page provides the manufacturer documentation and describes the 12-bit differential SAR architecture, 3 V or 5 V operation, and maximum sampling rates of 833 kSPS and 1 MSPS. Use the manufacturer document for the authoritative pin description, timing information, electrical characteristics, and recommended application circuit.
Where can I find the AD7450ARM pinout?
The AD7450ARM pinout is published in the pin configuration and pin descriptions sections of the Analog Devices manufacturer datasheet. The component uses an 8-MSOP package with a 0.65 mm pitch and 3.00 mm body width, so the physical drawing must be checked against the exact package drawing before PCB routing. Analog Devices also provides the AD7450ARM-specific datasheet page, which is the appropriate source for confirming every signal and supply connection.
Is AD7450ARM suitable for differential sensor measurement?
Yes, the AD7450ARM is suitable for differential sensor measurement because it has a fully differential input and an integrated low-noise differential track-and-hold amplifier. The converter measures the voltage difference between two input nodes, which helps suppress common-mode noise when the source is a bridge, current-to-voltage converter, or instrumentation amplifier. Input range, common-mode limits, source impedance, and acquisition-time requirements still must be checked against the manufacturer datasheet.
What is the difference between AD7450 and AD7450A?
The AD7450 and AD7450A are both 12-bit, high-speed, low-power SAR ADCs with fully differential inputs and single 3 V or 5 V operation, but they are distinct product families rather than simple suffix variants. The AD7450A family is identified separately by Analog Devices and includes the related AD7440/AD7450A product family. Existing AD7450 designs should therefore not be converted to AD7450A solely from the family name; verify pinout, timing, reference behavior, and electrical limits directly.
AD7450ARM vs AD7450ARMZ — which one should be selected?
AD7450ARM and AD7450ARMZ identify closely related 8-MSOP versions, with the ordering suffix generally distinguishing packaging and termination or reel configuration. The original AD7450ARM is documented as obsolete and uses tube packaging, whereas the ARMZ listing identifies an 8-MSOP variant. Engineers should confirm the active manufacturer ordering code, package drawing, lead finish, and current lifecycle status before treating either ordering code as a direct replacement.
When should I choose AD7450ARM over AD7450A?
Choose the AD7450ARM when maintaining an existing design whose schematic, PCB, reference circuit, and acquisition timing were originally based on the AD7450 family. Choose an AD7450A-family device for a new design only after confirming electrical compatibility, pin mapping, conversion timing, reference voltage behavior, and package dimensions. The AD7450ARM offers 12-bit resolution with differential sampling up to 1 MSPS at 5 V, but its obsolete lifecycle status makes long-term availability an important selection criterion.
Is AD7450ARM suitable for a 5 V industrial acquisition system?
Yes, the AD7450ARM can fit a 5 V acquisition system that requires 12-bit resolution and sampling at up to 1 MSPS. Its single 5 V supply simplifies system power design, while the fully differential input supports bridge or differential sensor signals. Because industrial environments can introduce common-mode voltage and fast transients, verify the input common-mode range, external reference design, source impedance, analog filtering, and isolation requirements before production release.
What is the best drop-in replacement for AD7450ARM?
No current manufacturer or cross-reference listing confirms five drop-in replacements for the obsolete AD7450ARM. The closest documented same-footprint candidates are AD7450ARMZ and AD7450ARZ, but their ordering, packaging, lifecycle, and exact suffix details must be checked before substitution. Use the manufacturer datasheet and package drawing to confirm all eight pins, reference implementation, supply sequencing, and acquisition timing rather than relying on the 8-MSOP package name alone.
Can AD7450ARMZ replace AD7450ARM?
AD7450ARMZ is the closest documented 8-MSOP candidate for evaluating as a replacement, but it should not be treated as an unconditional drop-in without a complete suffix and lifecycle review. The manufacturer information identifies AD7450ARMZ as a 12-bit, single-input SAR ADC in an 8-MSOP, while AD7450ARM is obsolete. Compare the manufacturer ordering tables for package, temperature grade, lead finish, tape-and-reel handling, and electrical limits before approving the substitution.
What are the key specifications of AD7450ARM that engineers should know?
The AD7450ARM combines 12-bit resolution, a fully differential input, single 3 V or 5 V operation, and a maximum throughput of 1 MSPS at 5 V. Analog Devices specifies 833 kSPS maximum throughput at 3 V, an external reference range of 100 mV to 3.5 V, and an operating range of -40°C to +85°C. The device is offered in an 8-MSOP package, and the original ARM ordering code is identified as obsolete.
What can replace AD7450ARM in an existing PCB design?
The replacement search should begin with AD7450ARMZ and AD7450ARZ because both are associated with the AD7450 family and 8-MSOP packaging, then proceed only if their manufacturer ordering tables confirm identical electrical limits and pin functions. No cross-brand pin-to-pin substitute is established by the available cross-reference material. A safe replacement therefore requires comparing the ADC input stage, reference input, conversion timing, supply range, package dimensions, and lifecycle status.
Where to buy AD7450ARM online?
Use the Request a Quote form on this page to request AD7450ARM availability, obsolete-part sourcing support, lot traceability, and package quantity. Because AD7450ARM is identified as obsolete, stock and lead time can vary by remaining inventory and package form. Avoid assuming that an obsolete catalog listing guarantees production supply; state the required quantity, date code, tube packaging, and inspection requirements with the request.
What is the price and lead time for AD7450ARM?
AD7450ARM pricing and lead time depend on remaining obsolete inventory, traceability requirements, and the exact package quantity. Use the Request a Quote form on this page to obtain the current commercial terms rather than relying on a historical catalog amount. For a responsible purchase request, include the required order quantity, tube packaging, acceptable date-code range, manufacturer documentation, and any third-party inspection requirements.
Is AD7450ARM in stock?
AD7450ARM is an obsolete part, and current stock cannot be inferred from historical listings. Use the Request a Quote form on this page to check available inventory and lead time for the exact 8-MSOP ordering code. For production continuity, specify the required quantity, tube packaging, date-code policy, and traceability documents so the sourcing response can distinguish new surplus from factory-repacked material.

Data referensi engineering untuk AD7450ARM — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose AD7450ARM when maintaining an existing 8-MSOP design that specifically depends on the original AD7450 electrical characteristics, reference implementation, and timing. Its 12-bit SAR architecture, fully differential input, and 833 kSPS to 1 MSPS throughput suit sensor interfaces, acquisition modules, and moderate-bandwidth communication signals. Consider AD7450ARMZ first when a current sourcing path is needed, but verify its manufacturer ordering information, lifecycle, temperature range, and package details. Evaluate AD7450ARZ similarly, distinguishing the ordering suffix from the electrical device family. Do not select a cross-brand ADC merely because it has an 8-MSOP package; pin mapping, input range, acquisition time, reference implementation, serial timing, and electrical limits must all match. For new production designs, favor a currently supported ADC unless maintaining an existing board makes the obsolete AD7450ARM the only practical choice.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD7450ARMZ AD7450ARZ
Package 8-MSOP 8-MSOP 8-MSOP
Brand Analog Devices Analog Devices Analog Devices
Resolution 12 bit 12 bit 12 bit
Converter Architecture SAR SAR SAR
Analog Input Configuration 1 fully differential input 1 fully differential input 1 fully differential input
Maximum Throughput at 5 V 1 MSPS 1 MSPS 1 MSPS
Maximum Throughput at 3 V 833 kSPS 833 kSPS 833 kSPS
Supply Voltage 3 V to 5 V single supply 3 V to 5 V single supply 3 V to 5 V single supply
Reference Voltage Range 100 mV to 3.5 V 100 mV to 3.5 V 100 mV to 3.5 V

Diferensiator Kunci

  • Differential 12-bit conversion at a compact 1 MSPS maximum rate (vsAD7450ARMZ)
  • Single-supply operation supports portable and compact instrumentation (vsAD7450ARZ)
  • External reference range allows conversion-scale optimization (vsAD7450ARMZ)

Catatan Desain

Route the differential analog input as a short, symmetric pair from the source driver to the AD7450ARM input pins. Keep digital serial-interface traces away from the analog input and reference paths, and use a continuous ground reference beneath the relevant circuitry. Place input and reference bypass capacitors close to their associated pins with short return paths. The differential track-and-hold amplifier requires the source to settle within the acquisition interval, so routing resistance, capacitance, and source impedance must be included in the settling-time budget.

Choose either 3 V or 5 V operation according to the required throughput: the converter supports up to 833 kSPS at 3 V and 1 MSPS at 5 V. Decouple the supply locally and keep switching-regulator or digital-supply current out of the reference and analog-input return paths. The external reference may range from 100 mV to 3.5 V subject to supply constraints, but reference noise, drift, and dynamic resistance contribute directly to conversion error, so use a stable reference network rather than routing a sensitive analog node into the digital return.

Treat the analog input as a settling-time-sensitive node. The front-end amplifier or sensor interface must charge the ADC input capacitance and settle to the required accuracy before the next conversion. Include source resistance, cable or filter capacitance, and the ADC acquisition aperture in the timing analysis. An external anti-alias filter is recommended for waveform or communication inputs, but its capacitor values should be checked against the acquisition requirements so the filter does not prevent full settling at the selected sampling rate.

Do not assume that every AD7450 ordering suffix is production interchangeable solely because the devices use an 8-MSOP. Confirm the exact ordering table, package drawing, lead finish, temperature grade, tape-and-reel or tube handling, and lifecycle status. Because AD7450ARM is obsolete, also confirm whether a proposed replacement preserves the electrical limits, reference behavior, conversion timing, and all eight pin functions. PCB footprint compatibility alone is not sufficient evidence of drop-in equivalence.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The AD7450ARM listing identifies EAR99 export control classification and obsolete lifecycle status. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer documentation for the exact ordering code.

Data disahkan pada: 2026-11-18 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

AD7450ARM datasheet AD7450ARM pinout AD7450ARM datasheet pdf AD7450ARM specifications AD7450ARM 8-MSOP AD7450ARM replacement AD7450ARM equivalent AD7450ARM cross reference AD7450ARM price AD7450ARM stock Analog Devices AD7450ARM AD7450ARM vs AD7450ARMZ AD7450ARM application circuit AD7450 12 bit SAR ADC

Komponen dan Istilah Terkait

Analog Devices AD7450ARM AD7450ARMZ AD7450ARZ AD7450 AD7450A analog-to-digital converter ADC successive-approximation ADC SAR ADC data converter fully differential input differential track-and-hold amplifier 12-bit resolution 1 MSPS 833 kSPS single supply 3 V to 5 V power supply external reference voltage 8-MSOP MSOP package family surface-mount package industrial sensor measurement data acquisition EAR99
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ