Analog Devices

AD8008ARM - 380 MHz Dual Current-Feedback Amplifier | Analog Devices

MPN: AD8008ARM ✓ Aktif
4 uA Vdss 8-MSOP, 3.00 mm width Package
MOQ: 1 |

AD8008ARM Ringkasan

The Analog Devices AD8008ARM is a dual current-feedback amplifier with two independent high-speed channels, 380 MHz gain-bandwidth performance, 59 dB instrumentation-amplifier performance, and low 4 uA supply current. The device is supplied in an 8-MSOP package and operates from 5 V to 12 V, making it suitable for precision signal-conditioning systems that require high bandwidth and low distortion.

A current-feedback amplifier is a voltage-feedback amplifier family that uses a low-impedance inverting input to control the amplifier. Current feedback amplifiers are widely used in high-speed instrumentation, active filters, video and test equipment because they can maintain high bandwidth and low distortion over a broad gain range. In the electronics hierarchy, the AD8008ARM is an analog amplifier IC, an operational amplifier, and a current-feedback amplifier.

The AD8008 includes two amplifier channels in one package, reducing board area while simplifying dual-channel signal paths. Its 380 MHz gain-bandwidth product supports signal paths that require substantially more bandwidth than general-purpose operational amplifiers. The low 4 uA supply current also distinguishes it from many high-speed amplifiers that consume considerably more power.

Analog Devices describes the AD8007 and AD8008 as high-performance current-feedback amplifiers using its proprietary second-generation eXtra-Fast Complementary Bipolar, or XFCB, process. The AD8008ARM therefore combines bipolar transistor signal paths with a dual-channel architecture. The 59 dB instrumentation-amplifier specification is useful when determining the attainable accuracy of closed-loop gain and system bandwidth, while the 380 MHz characteristic identifies the amplifier as a high-speed device rather than a precision DC amplifier.

Typical uses include active filters, pulse-shaping networks, video signal conditioning, communications equipment, instrumentation, and test-and-measurement systems. The dual-channel configuration is particularly useful when two signals must be amplified consistently, such as in differential interfaces, matched filter stages, or paired instrumentation channels. Its low supply current can also support portable test equipment where power consumption is important.

PCB design should preserve the high-speed behavior of the device. Keep feedback components and signal traces short, use a continuous ground reference, and provide local supply bypassing close to the power pins. Because a current-feedback amplifier does not use the same gain-bandwidth relationship as a conventional voltage-feedback amplifier, determine the required feedback resistor directly from the manufacturer’s gain and bandwidth guidance.

This product page combines manufacturer specifications with practical selection guidance, package information, and drop-in comparison data for engineers evaluating the AD8008ARM in high-speed analog signal chains.

Alternatif penggantian untuk AD8008ARM — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

AD8022ARM-REEL

✅ Drop-In
📦 8-MSOP
Maximum supply voltage is 26 V versus 12 V, a 117% increase; both are 8-MSOP dual amplifiers

📋 Alternatif referensi (tidak dalam katalog)

AD8008ARM Rating Maksimal & Karakteristik Listrik

Amplifier Type Dual current-feedback amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 380 MHz
Instrumentation Amplifier Gain 59 dB
Arus Pemuat 4 uA
Minimum Supply Voltage 5 V
Maximum Supply Voltage 12 V
Supply Voltage Span 5 V to 12 V
Rentang Suhu Kerja -40 C to +85 C
Paket 8-MSOP, 3.00 mm width
Jumlah Pin 8 pins
Tipe Mounting Surface mount
Process Technology Second-generation XFCB complementary bipolar

AD8008ARM 8-msop, 3.00 mm width Diamant Konfigurasi Panduan

Konfigurasi pin untuk AD8008ARM (8-msop, 3.00 mm width pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-msop, 3.00 mm width untuk AD8008ARM

Tidak ada data diatribut pin yang tersedia untuk AD8008ARM.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

AD8008ARM cocok untuk 6 aplikasis: Active Filter Networks, Video Signal Conditioning, Instrumentation Signal Conditioning, Pulse and Waveform Shaping, Portable Test Equipment, Communications Interface.

⚡

Active Filter Networks

The AD8008ARM fits active filter stages requiring substantially more bandwidth than a general-purpose dual operational amplifier. Its 380 MHz gain-bandwidth product and current-feedback architecture are suited to low-pass, high-pass, and band-pass networks that process fast signals while maintaining low distortion. Two amplifier channels can implement a matched second-order section or two coordinated filter stages without using separate packages. The 4 uA supply current also benefits compact filter modules and battery-powered analyzers. When calculating component values, follow the current-feedback gain and bandwidth guidance in the manufacturer datasheet rather than applying the voltage-feedback gain-bandwidth relationship. Short feedback traces and closely placed bypassing capacitors are important for preserving predictable high-frequency behavior.

📺

Video Signal Conditioning

AD8008ARM is appropriate for video buffering, impedance conversion, and signal-shaping paths where the 380 MHz gain-bandwidth product provides more bandwidth than conventional dual op amps. The current-feedback topology is particularly useful in video circuits because it supports high-speed closed-loop operation with controlled feedback components. Its dual-channel construction can process luminance and chrominance, or complementary data paths, while conserving board area. The specified 5 V to 12 V supply range permits operation from a single 5 V rail or from split supplies, provided the input and output signal levels remain within the common-mode limits. Use a solid ground plane and short output routing to minimize added distortion and maintain video quality.

🧩

Instrumentation Signal Conditioning

The AD8008ARM can condition high-bandwidth sensor and instrumentation signals when a dual, low-power current-feedback amplifier is preferred over a general-purpose op amp. Its 59 dB instrumentation-amplifier performance and 380 MHz gain-bandwidth product support closed-loop stages operating well above audio frequencies. The two channels can handle a differential signal or matched inputs while keeping package count low. For sensor interfaces, verify input bias current, common-mode range, and output swing against the actual source impedance and excitation level before finalizing the design. The 4 uA supply current is useful for compact field instruments, while the 8-MSOP package supports placement near the sensor connector to reduce susceptibility to noise and interference.

📡

Pulse and Waveform Shaping

AD8008ARM suits pulse amplification, slew control, and waveform-shaping circuits that benefit from its 380 MHz gain-bandwidth product. Current-feedback amplifiers are widely chosen for high-speed pulse circuits because their bandwidth can remain useful over multiple closed-loop gains, subject to the manufacturer’s feedback-resistor guidance. The dual-channel arrangement allows a signal to be amplified and conditioned along two paths with identical device characteristics. The low 4 uA supply current can reduce system power in portable pulse-analysis equipment. Keep the feedback loop compact, avoid long stubs, and place supply capacitors near the device. Because edge-rate and distortion performance depend on output loading and feedback values, prototype the final timing and loading conditions.

🖥️

Portable Test Equipment

The AD8008ARM is a practical choice for portable oscilloscope, waveform-generator, and signal-analysis equipment that needs high bandwidth without a large power budget. Its 380 MHz gain-bandwidth product supports acquisition and drive paths above many general-purpose amplifier limits, while the 4 uA supply current limits quiescent consumption. Two channels can share the same package in a dual-trace instrument or implement a differential input stage. The 8-MSOP footprint reduces board area, although careful layout remains necessary to prevent added distortion. Keep sensitive inputs away from power converters and digital return currents, and use the manufacturer’s application guidance to select feedback resistors that maintain the required bandwidth and pulse response.

🌐

Communications Interface

AD8008ARM can serve in high-speed communications interface and line-driver stages requiring low distortion and wide bandwidth. Its 380 MHz gain-bandwidth product provides useful margin for digital transitions, while the current-feedback architecture allows gain selection through the external feedback network. The two channels can handle transmit and receive paths or a pair of differential legs in a compact implementation. The 5 V to 12 V operating span is compatible with common low-voltage interface rails, subject to the device’s input and output swing restrictions. Maintain a continuous return path, keep feedback components close to the amplifier pins, and separate noisy switching-current paths from the signal reference to limit channel-to-channel crosstalk.

Ringkasan Produk Direkomendasikan

AD8008ARZ Analog Devices Digunakan di dalam: Active Filter Networks, Video Signal Conditioning, Instrumentation Signal Conditioning, Pulse and Waveform Shaping, Portable Test Equipment, Communications Interface AD8007ARM Single-channel member of the AD8007/AD8008 amplifier family Digunakan di dalam: Active Filter Networks, Video Signal Conditioning, Instrumentation Signal Conditioning, Pulse and Waveform Shaping, Portable Test Equipment, Communications Interface
What is the AD8008ARM?
The AD8008ARM is a dual current-feedback amplifier from Analog Devices with two independent channels, 380 MHz gain-bandwidth performance, and a low 4 uA supply current. According to the Analog Devices AD8007/AD8008 datasheet, it uses the company’s second-generation XFCB complementary bipolar process and is intended for high-performance, low-distortion signal paths.
What are the key specifications of AD8008ARM that engineers should know?
The AD8008ARM combines two current-feedback amplifier channels, a 380 MHz gain-bandwidth product, 59 dB instrumentation-amplifier performance, and 4 uA supply current in an 8-MSOP package. According to the Analog Devices AD8007/AD8008 datasheet, its supply range is 5 V to 12 V and its specified operating-temperature range is -40 C to +85 C.
What supply voltage does the AD8008ARM require?
The AD8008ARM operates from 5 V to 12 V. According to the Analog Devices AD8007/AD8008 datasheet and the published AD8008ARM component specifications, this supply span supports both single-supply and split-supply arrangements, subject to the input and output common-mode limits of the selected operating point.
Where can I download the AD8008ARM datasheet PDF?
The official AD8008ARM datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD8007_8008.pdf. The manufacturer datasheet is the preferred document for the AD8007/AD8008 family because it contains the electrical characteristics, package drawings, theory of operation, and recommended application circuits.
Where can I find the AD8008ARM pinout?
Use the pin-description table and package drawing in the official Analog Devices AD8007/AD8008 datasheet to assign AD8008ARM connections. The device is an 8-MSOP package, and the manufacturer’s package drawing identifies the pin numbering and dimensions. Complete pin-level connection details are not reproduced on this page.
Is AD8008ARM suitable for active filters and video signals?
Yes, the AD8008ARM is suitable for active filters and video signal conditioning because it combines 380 MHz gain-bandwidth performance with a current-feedback architecture and low distortion. According to the Analog Devices product description, the AD8008 is designed for a wide range of high-performance amplifier applications. Its dual-channel configuration also allows matched processing of two related signals.
How much supply current does the AD8008ARM use?
The AD8008ARM uses 4 uA supply current as listed in its published component specifications. This low operating current is one reason Analog Devices describes the AD8008 as suitable for a wide range of amplifier applications. When comparing it with other high-speed dual amplifiers, also evaluate available output-current capability and the required external bias network.
What is the difference between AD8008ARM and AD8008ARM-REEL?
AD8008ARM and AD8008ARM-REEL refer to the same underlying AD8008 dual current-feedback amplifier in an 8-MSOP package, but they are different orderable MPNs associated with different packaging arrangements. The reel suffix is not listed as a drop-in alternative here because packaging-code variants do not add distinct electrical engineering value.
AD8008ARM vs AD8022ARM-REEL: which is better for a low-voltage signal chain?
AD8008ARM is the stronger choice for a design constrained to a 5 V to 12 V supply, while AD8022ARM-REEL supports a higher maximum supply voltage of 26 V according to the published comparison data. Both are identified as 8-MSOP dual amplifiers. The higher AD8022 supply limit adds headroom for higher-voltage systems, whereas AD8008ARM provides a lower-voltage operating range.
When should I choose AD8008ARM over AD8022ARM-REEL?
Choose AD8008ARM when the circuit operates within a 5 V to 12 V supply and the design benefits from the AD8008’s 380 MHz gain-bandwidth product, low 4 uA supply current, and dual-channel current-feedback architecture. Consider AD8022ARM-REEL when the circuit requires a higher maximum supply voltage, since its published maximum is 26 V versus 12 V for AD8008ARM.
Is AD8008ARM suitable for portable test and measurement equipment?
Yes, the AD8008ARM is well suited to portable test and measurement equipment that requires high bandwidth and low power consumption. Its 380 MHz gain-bandwidth product handles fast signals, while the 4 uA supply current limits the amplifier’s contribution to battery drain. The dual channels can also reduce component count when the instrument processes two related signals.
What is the best drop-in replacement for AD8008ARM?
No additional drop-in replacement with a distinct engineering profile was confirmed for AD8008ARM. AD8022ARM-REEL is the closest published same-package comparison, but its 26 V maximum supply voltage differs from the AD8008ARM’s 12 V maximum, so it is included with a 70% parameter-proximity rating. Validate stability, gain-bandwidth behavior, common-mode limits, and external resistor values before substitution.
Can AD8008ARM replace a generic dual op amp?
AD8008ARM can replace a generic dual op amp only after confirming signal type and feedback-network compatibility. It is a current-feedback amplifier, so its gain-bandwidth behavior, stability criteria, and recommended feedback resistors differ from a conventional voltage-feedback amplifier. Do not reuse a generic dual op-amp footprint without checking every electrical parameter and the manufacturer’s reference configuration.
Where to buy AD8008ARM online?
Use the Request a Quote form on this page to request AD8008ARM pricing, stock confirmation, and lead time. The form connects the request with XAIPART’s quotation process without requiring you to navigate a distributor directory. Provide the required quantity, target delivery date, and any reel or tube packing requirement with the inquiry.
What is the price of AD8008ARM?
The current AD8008ARM price is not displayed as a static figure because quotation and inventory conditions can change. Submit the Request a Quote form on this page with your quantity and required packaging to obtain a current unit price. For technical screening, the device is an Analog Devices dual, 380 MHz current-feedback amplifier in an 8-MSOP package.
What is the lead time and stock status for AD8008ARM?
Request current AD8008ARM stock and lead-time confirmation through the Request a Quote form on this page. Include your required quantity, production schedule, and approved package format so the quotation can reflect the appropriate supply condition. The AD8008ARM is an Analog Devices dual current-feedback amplifier rated for a 5 V to 12 V supply.
Does AD8008ARM support RoHS and AEC-Q100 qualification?
The RoHS status of AD8008ARM must be confirmed from the current Analog Devices product documentation or declaration associated with the ordered part. AEC-Q100 qualification is not applicable because the AD8008ARM is a linear analog amplifier rather than an automotive-qualified semiconductor. Avoid assuming compliance without a manufacturer statement covering the exact ordering code.

Data referensi engineering untuk AD8008ARM — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose AD8008ARM for compact, low-voltage, high-speed signal-conditioning designs that benefit from two current-feedback channels, a 380 MHz gain-bandwidth product, and 4 uA supply current. It is especially appropriate for active filters, video paths, instrumentation interfaces, and portable test equipment operating within a 5 V to 12 V supply. Consider AD8022ARM-REEL when the circuit requires a substantially higher maximum supply voltage, because its published limit is 26 V compared with 12 V for AD8008ARM. Before substituting it, verify gain-bandwidth behavior, output-current capability, common-mode range, and the required feedback resistors. AD8008ARM-REEL is an orderable packaging variant of the same device rather than a distinct drop-in alternative, so it should be selected according to the required production packing rather than for a different electrical benefit.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD8022ARM-REEL
Brand Analog Devices Analog Devices
Package 8-MSOP 8-MSOP - same package
Amplifier Configuration Dual current-feedback amplifier Dual current-feedback amplifier
Minimum Supply Voltage 5 V 4.5 V
Maximum Supply Voltage 12 V 26 V
Operating Temperature Range -40 C to +85 C -40 C to +85 C
Mounting Type Surface mount Surface mount

Diferensiator Kunci

  • Combines two high-speed channels with low quiescent current (vsAD8022ARM-REEL)
  • Defined low-voltage operating range (vsAD8022ARM-REEL)
  • Specified instrumentation-amplifier performance (vsAD8022ARM-REEL)
  • Compact dual-channel implementation (vsAD8022ARM-REEL)

Catatan Desain

Place the feedback network directly beside the amplifier pins and keep its loop physically small. Long feedback traces can add parasitic inductance and capacitance, which can alter high-speed stability and pulse response. Route the signal and return paths over a continuous ground plane, avoid routing beneath the MSOP where practical, and place the input stage away from switching nodes and inductors.

Place the supply bypass capacitor close to the device power pin and connect it through a short ground path. Use the decoupling arrangement and capacitor values recommended in the Analog Devices application guidance for the intended bandwidth. Decoupling requirements become more important as the 380 MHz gain-bandwidth product is approached, because supply impedance can otherwise influence high-frequency distortion and oscillation margin.

Do not calculate closed-loop bandwidth using the voltage-feedback gain-bandwidth relationship. The AD8008 is a current-feedback amplifier, so the selected feedback resistor influences gain, bandwidth, and stability. Use the manufacturer’s gain-versus-bandwidth guidance, confirm output-current capability for the intended load, and verify input and output common-mode limits before committing the circuit to layout.

The 4 uA supply current makes average quiescent dissipation low, but actual channel dissipation rises with output current, supply voltage, and output swing. Check the amplifier’s output-current limit against capacitive and resistive loads and provide copper around the MSOP when operating near maximum swing. Account for temperature rise at the device rather than relying only on ambient temperature, especially in enclosed portable equipment.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration for the exact AD8008ARM ordering code was identified. AEC-Q100 is not applicable to this linear amplifier.

Pencarian Terkait

AD8008ARM datasheet AD8008ARM datasheet pdf AD8008ARM pinout AD8008ARM 380 MHz amplifier AD8008ARM 8-MSOP AD8008ARM current feedback amplifier AD8008ARM equivalent AD8008ARM replacement AD8008ARM cross reference AD8008ARM vs AD8022ARM-REEL AD8008ARM application circuit AD8008ARM price AD8008ARM stock Analog Devices AD8008ARM AD8008ARM footprint

Komponen dan Istilah Terkait

Analog Devices AD8008ARM AD8008ARM-REEL AD8022ARM-REEL AD8007ARM AD8008ARZ current-feedback amplifier current feedback amplifier CFA operational amplifier amplifier IC analog amplifier 380 MHz gain-bandwidth product 59 dB instrumentation amplifier gain 4 uA supply current 5 V to 12 V supply 8-MSOP MSOP package surface-mount package XFCB complementary bipolar process active filter video signal conditioning instrumentation signal conditioning test and measurement equipment feedback resistor
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ