Analog Devices

AD976ARSZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

MPN: AD976ARSZ ✓ Aktif
5 V Vdss 28-pin SSOP Package
MOQ: 1 |

AD976ARSZ Ringkasan

Analog Devices AD976ARSZ is a 16-bit, single-input successive-approximation analog-to-digital converter rated at 100 kSPS, supplied by a single 5 V rail and housed in a 28-pin SSOP package. Its 2.5 V internal reference, switched-capacitor conversion architecture, and high-speed parallel output interface make it suitable for precision signal acquisition systems requiring more resolution than ordinary 12-bit or 14-bit converters.

An ADC is an interface IC that converts an analog voltage into a digital value. Within the broader semiconductor hierarchy, an ADC belongs to data converters and ultimately to interface ICs. The AD976 family uses successive-approximation conversion to acquire one analog channel, while the parallel digital interface transfers each 16-bit conversion result directly into a microprocessor, digital signal processor, FPGA, or data-capture system.

The AD976ARSZ provides a resolution of 16 bits, a throughput rate of 100 kSPS, and operation from a single 5 V supply. Its internal 2.5 V reference reduces the need for an external precision reference in suitable designs. The device also uses a switched-capacitor ADC architecture, which supports repeatable conversion performance while imposing sampling and acquisition requirements on the source network.

The SSOP package offers a compact surface-mount footprint and exposes the converter's digital outputs in parallel. Parallel interface design can simplify connections to older microprocessors and DSPs because no serial protocol converter is required. The trade-off is a larger pin count than a modern serial-interface ADC and potentially more routing on a high-density printed circuit board.

Typical uses include industrial process monitoring, instrumentation, communications receivers, laboratory measurement equipment, and embedded control systems. The 16-bit resolution is particularly useful when the measured signal occupies much of the converter's input range, allowing smaller changes in voltage to be represented by distinct digital codes. Input bandwidth, acquisition time, reference accuracy, and the complete external analog front end must still be evaluated together.

For reliable layout, place the input network, converter, and digital interface according to the manufacturer's recommended topology. Keep sensitive analog traces short, provide the required bypass capacitance at the supply pins, and route the high-speed digital outputs away from the analog input. Confirm that the signal source can charge the internal sample-and-hold capacitor within the available acquisition interval.

This product record combines the manufacturer's family-level specifications, exact-orderable package information, sourcing fields, application guidance, and replacement analysis in a form that helps engineers plan signal-chain and PCB decisions before releasing a production design.

Alternatif penggantian untuk AD976ARSZ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian AD976ARSZ (sama faktor bentuk dan footprint) — berbeda di dalam Architecture, Package, Mounting Type, Supply Voltage, Input Type.

Analog Devices
Architecture: Successive Approximation (SAR)
Package: 28-pin PDIP
Mounting Type: Through-hole
Bandingkan dengan AD976ARSZ →
Analog Devices
Architecture: SAR (Successive Approximation)
Package: 28-pin PDIP (N-28)
Mounting Type: Through-Hole (DIP)
Bandingkan dengan AD976ARSZ →
Analog Devices
Architecture: Successive-approximation switched-capacitor ADC
Package: 28-lead SOIC
Supply Voltage: 5 V single supply
Bandingkan dengan AD976ARSZ →
Analog Devices
Architecture: Successive approximation, switched capacitor
Input Type: 1 input, single-ended
Bandingkan dengan AD976ARSZ →

AD976AR

✅ Drop-In
Analog Devices
📦 28-pin SSOP
16 bit · 100 kSPS · Successive-approximation switched-capacitor ADC · Single-ended · 1 input · 5 V single supply · 2.5 V · External or internal

Kontak untuk harga

Lihat Datasheet →

AD976ABN

✅ Drop-In
Analog Devices
📦 28-pin SSOP
16 bit · Successive Approximation (SAR) · 1 single-ended · 200 kSPS · 100 kSPS · 5 V single supply · 100 mW · 2.5 V (internal/external selectable)

Kontak untuk harga

Lihat Datasheet →

AD976ARSZ Rating Maksimal & Karakteristik Listrik

Converter Type Successive-approximation ADC (SAR)
Resolusi 16 bit
Input Channels 1 channel
Laju Pengambilan Sampel 100 kSPS
Tegangan Pemuat 5 V
Internal Reference Voltage 2.5 V
Architecture Switched-capacitor ADC
Digital Interface Parallel
Paket 28-pin SSOP
Package Type Skinny SSOP
Tipe Mounting Surface mount
Terminal Form Gull wing
Temperature Grade Industrial
Operating Temperature Grade Industrial

AD976ARSZ skinny ssop Diamant Konfigurasi Panduan

Konfigurasi pin untuk AD976ARSZ (skinny ssop pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai skinny ssop untuk AD976ARSZ

Tidak ada data diatribut pin yang tersedia untuk AD976ARSZ.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

AD976ARSZ cocok untuk 6 aplikasis: Industrial Process Monitoring, Precision Instrumentation, Communications Receiver, Embedded Data Acquisition, Conditioned Sensor Interface, Laboratory Waveform Recorder.

🏭

Industrial Process Monitoring

The AD976ARSZ fits process-measurement systems that require 16-bit resolution from a single analog channel at up to 100 kSPS. Its single 5 V operation simplifies the power architecture around embedded controllers, while the parallel output can connect directly to a suitable microprocessor, DSP, or FPGA. For temperature, pressure, or chemical-sensor conditioning, the external front end should scale the sensor output into the converter input range and limit source impedance so the switched-capacitor input settles within the acquisition interval. The result is a compact acquisition path for monitoring slow industrial variables without relying on a lower-resolution converter.

🔧

Precision Instrumentation

The AD976ARSZ is appropriate for laboratory and field instrumentation where a 16-bit measurement result is more useful than a 12- or 14-bit conversion. At 100 kSPS, it can acquire repetitive analog measurements while its internal 2.5 V reference and parallel digital output support a deterministic data path. The analog front end remains critical: use an instrumentation-amplifier or low-noise op-amp stage, establish the correct bipolar input configuration, and select an input RC network that preserves settling accuracy. For slow sensor signals, oversampling can improve effective resolution if the source, reference, and digital averaging are suitably controlled.

🌐

Communications Receiver

The AD976ARSZ can serve as the sampling element in a communications receiver when the required baseband bandwidth can be represented at 100 kSPS. Its 16-bit resolution preserves small amplitude variations in the received signal, while the parallel interface supports direct connection to digital demodulation hardware. Designers should place anti-alias filtering ahead of the converter and verify that the complete receiver does not demand the 200 kSPS throughput offered by the AD976A. Source impedance, acquisition timing, and clock-jitter sensitivity must be evaluated so that the ADC does not limit channel accuracy.

🖥️

Embedded Data Acquisition

The AD976ARSZ suits embedded acquisition systems that collect one analog channel and transfer each 16-bit result through a parallel bus. Its 100 kSPS rate is adequate for many control, status, and diagnostic waveforms, and the 28-pin SSOP package supports compact surface-mount assembly. The processor interface should account for setup and hold timing on the parallel outputs, while the PCB must separate sensitive input routing from switching nodes. A microcontroller or DSP with a compatible acquisition interface can avoid a serial protocol converter, although the increased pin count should be included in the device layout plan.

🧩

Conditioned Sensor Interface

The AD976ARSZ can digitize the output of a bridge, transducer, or low-level sensor after suitable amplification and filtering. A 16-bit converter is most useful when the conditioned signal occupies a substantial portion of the input range; otherwise, additional gain improves utilization more than resolution alone. Because the AD976 uses a switched-capacitor input, the selected amplifier must drive the recommended network and settle between conversions. Keep the sensor, instrumentation amplifier, converter, and reference return paths physically close to minimize noise pickup and ground-potential errors.

📺

Laboratory Waveform Recorder

The AD976ARSZ can form the core of a low-to-moderate-speed waveform recorder when burst acquisition and 16-bit amplitude resolution are priorities. The parallel interface allows captured samples to be transferred efficiently into digital memory or processed by an FPGA, and the 100 kSPS rate provides 10 ms windows for 1000 samples. The analog front end must provide adequate input bandwidth and low distortion, while the acquisition cycle must preserve the specified sample interval. For faster transients or wider bandwidth, redesign around the 200 kSPS AD976A instead of assuming that extra bandwidth is available without corresponding system changes.

Ringkasan Produk Direkomendasikan

AD976AR Analog Devices Digunakan di dalam: Industrial Process Monitoring, Precision Instrumentation, Communications Receiver, Embedded Data Acquisition, Conditioned Sensor Interface, Laboratory Waveform Recorder AD976A Same 16-bit single-supply converter family with 200 kSPS throughput Digunakan di dalam: Industrial Process Monitoring, Precision Instrumentation, Communications Receiver, Embedded Data Acquisition, Conditioned Sensor Interface, Laboratory Waveform Recorder
What are the key specifications of AD976ARSZ that engineers should know?
The AD976ARSZ is a 16-bit, single-channel SAR ADC with a maximum sampling rate of 100 kSPS, a single 5 V supply, a 2.5 V internal reference, and a parallel digital interface in a 28-pin SSOP package. According to the Analog Devices AD976 product page, the converter uses a switched-capacitor architecture. These characteristics make it appropriate for precision instrumentation and embedded acquisition systems, while the parallel interface favors DSPs, FPGAs, and microprocessors with directly accessible digital buses.
What is the operating voltage of AD976ARSZ?
The AD976ARSZ operates from a single 5 V supply. The manufacturer's AD976 product page identifies single-supply operation for the AD976 family and describes the AD976ARSZ as a 16-bit converter in a 28-pin SSOP package. The exact allowable supply tolerance and analog input range should be confirmed in the manufacturer datasheet before finalizing power-rail design, particularly when the converter shares a board with motors, relays, or other noisy loads.
What is the sampling rate of AD976ARSZ?
The AD976ARSZ supports a sampling rate of 100 kSPS. Analog Devices identifies the AD976 as the 100 kSPS member of the AD976 and AD976A family, while the AD976A reaches 200 kSPS. The 100 kSPS rating describes maximum conversion throughput, but practical signal bandwidth also depends on acquisition time, input impedance, source drive capability, filtering, and the timing of the external control signals.
What is the difference between AD976 and AD976A?
The AD976 reaches 100 kSPS, while the AD976A reaches 200 kSPS; both are described by Analog Devices as 16-bit, low-power ADCs using a switched-capacitor architecture and a single 5 V supply. The AD976ARSZ belongs to the 100 kSPS AD976 version. A 200 kSPS replacement cannot simply be treated as an interchangeable upgrade because the acquisition timing, system bandwidth, clocking, and signal-chain requirements must be revalidated.
Where can I download the AD976ARSZ datasheet PDF?
The official AD976ARSZ documentation is available through the Analog Devices AD976 product page at https://www.analog.com/en/products/ad976.html. That page provides the family datasheet and ordering information for the AD976 and AD976A. Use the manufacturer's pin-description and application information to assign signals, select the input network, and confirm package, electrical, and timing details before layout release.
Where can I find the AD976ARSZ pinout?
The AD976ARSZ pinout is published in the Analog Devices AD976 manufacturer datasheet and uses a 28-pin SSOP package. The AD976 family is offered in skinny 28-pin DIP, SSOP, and SOIC packages, so engineers should verify the physical package suffix before applying a pin diagram. Use the pin-description table from the AD976 datasheet for the exact SSOP ordering because package drawings from other AD976 variants may have different lead assignments or dimensions.
What can replace AD976ARSZ?
A direct replacement must match the AD976ARSZ electrically, mechanically, and logically rather than merely provide the same nominal resolution. The closest same-family options identified for this exact package include AD976AR and the higher-throughput AD976A in the applicable 28-pin package, but each requires pin and timing verification. No cross-brand drop-in equivalent with confirmed 28-pin SSOP pin compatibility was identified, so do not approve a substitute solely from a generic parametric cross-reference result.
Is AD976ARSZ the same as AD976AR?
AD976ARSZ and AD976AR appear in the same Analog Devices AD976 ordering family, but the suffix characters can encode packaging, temperature, or lead-finish differences. The exact AD976AR package and orderable status must be checked against the AD976ARSZ 28-pin SSOP configuration before treating it as a replacement. Pin compatibility, speed grade, temperature grade, and ship-tube versus tape-and-reel handling all require confirmation.
When should I choose AD976ARSZ over the AD976A?
Choose the AD976ARSZ when the acquisition system only requires throughput up to 100 kSPS and the established 16-bit AD976 interface is preferable. Choose the AD976A when twice the conversion throughput, up to 200 kSPS, provides a functional benefit and the board timing, acquisition network, downstream logic, and signal bandwidth can be redesigned or revalidated as needed. The converter family shares a general architecture, but differing throughput means the AD976A is not automatically a drop-in functional substitute.
Is AD976ARSZ suitable for industrial process measurement?
Yes, AD976ARSZ is suitable for many industrial measurement systems because it combines 16-bit resolution, 100 kSPS throughput, single 5 V operation, and an industrial temperature-grade ordering option. Its suitability depends on the sensor signal range and source impedance, analog front-end accuracy, required sampling bandwidth, isolation requirements, and environmental noise. Use the converter’s acquisition and reference specifications to size the input network and filtering.
How should the AD976ARSZ input network be designed?
Design the AD976ARSZ input network so the source can charge the converter’s internal sample-and-hold capacitor within the available acquisition time. The manufacturer’s recommended application circuit should determine the input resistance, capacitor, and source-drive arrangement. At 100 kSPS, a seemingly fast sensor can still create excessive settling error if its output impedance is too high, so verify acquisition behavior at the lowest expected sampling rate.
Does AD976ARSZ require an external voltage reference?
The AD976ARSZ includes an internal 2.5 V reference, allowing operation without a separate external reference in suitable designs. The usable input span is established by that internal reference and the converter configuration. Applications requiring higher absolute accuracy, better drift performance, or calibration flexibility may still benefit from an external precision reference, but that choice must match the converter’s reference and voltage-plan requirements.
Where to buy AD976ARSZ online?
Use the Request a Quote form on this XAIPART page to request current AD976ARSZ availability, lead time, and order handling. The exact orderable configuration is a 16-bit, 100 kSPS ADC in a 28-pin SSOP package. Confirm the required shipping form with the supplier, because the AD976 family includes multiple package and suffix configurations, and verify the industrial temperature designation before ordering.
What is the price of AD976ARSZ?
Current AD976ARSZ commercial terms are available through the Request a Quote form on this XAIPART page. The quote should identify the exact 28-pin SSOP ordering code, quantity, shipment form, and any required traceability. Because package suffix and quantity affect sourcing, request a quote for AD976ARSZ itself rather than a generic AD976-family price.
What is the lead time for AD976ARSZ?
Request the current AD976ARSZ lead time through the Request a Quote form on this XAIPART page. Lead time can vary with the exact package suffix, order quantity, and inventory position. For production planning, also confirm whether the required units must ship in a tube and whether any date-code, traceability, or quality-document requirements apply.
Is AD976ARSZ in stock?
Use the Request a Quote form on this XAIPART page to check the current AD976ARSZ stock position for the exact 28-pin SSOP configuration. Include the required quantity, delivery location, acceptable lead time, and desired shipment form in the request. For a new or obsolete-design review, request a scheduled allocation rather than relying on an unconfirmed stock count.
What is the best cross-brand equivalent for AD976ARSZ?
No cross-brand 28-pin SSOP equivalent with confirmed pin-to-pin compatibility was identified for the AD976ARSZ. A suitable replacement must preserve the 16-bit resolution, 100 kSPS-class throughput, 5 V supply arrangement, reference architecture, parallel output timing, and exact mechanical footprint. Use a manufacturer-specific parametric cross-reference as a starting point, then compare the complete pin descriptions and timing diagrams before treating any candidate as a drop-in replacement.

Data referensi engineering untuk AD976ARSZ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose AD976ARSZ when the design requires a single-channel, 16-bit conversion system with a maximum throughput of 100 kSPS, a single 5 V supply, and a parallel digital output. It is particularly suitable when the input source can settle the switched-capacitor sampling network within the available acquisition interval. Choose AD976AR when it is confirmed to match the exact package, temperature, lead-finish, and orderable requirements of the installed AD976ARSZ. Choose AD976A only when 200 kSPS provides a meaningful bandwidth benefit and the clocking, acquisition, output interface, and analog front end can be revalidated. No cross-brand drop-in substitute was confirmed for the 28-pin SSOP footprint; consequently, any cross-brand candidate should remain a redesign candidate until its pin assignments, timing, electrical limits, and mechanical drawing are checked against the AD976ARSZ datasheet.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD976AR AD976A
Brand Analog Devices Analog Devices Analog Devices
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP
Converter Type Successive-approximation ADC Successive-approximation ADC Successive-approximation ADC
Resolution 16 bit 16 bit 16 bit
Sampling Rate 100 kSPS 100 kSPS 200 kSPS
Input Channels 1 1 1
Supply Voltage 5 V 5 V 5 V
Internal Reference 2.5 V 2.5 V 2.5 V
Digital Interface Parallel Parallel Parallel
Architecture Switched-capacitor Switched-capacitor Switched-capacitor

Diferensiator Kunci

  • Matches the 100 kSPS AD976 throughput requirement without increasing the sample rate (vsAD976A)
  • Maintains 16-bit resolution and single 5 V operation within the same family (vsAD976A)
  • Uses the same 16-bit parallel-output architecture for direct digital acquisition (vsAD976AR)

Catatan Desain

Use the manufacturer's recommended input network and verify acquisition at the lowest operating sample rate. A high-impedance sensor or slow amplifier may not charge the switched-capacitor input quickly enough, producing gain-dependent settling error. Confirm source impedance, the recommended input capacitor, and settling margin in the datasheet application circuit rather than sizing the network from the 100 kSPS headline rate alone.

Place the bypass capacitor and converter close to their associated supply pins, and route the analog input away from switching nodes and parallel output traces. Use a compact, continuous ground path for the analog return and keep the input node small to minimize parasitic capacitance. A quiet reference and short supply-current path reduce supply coupling into the conversion result, particularly when the input signal is small relative to the 2.5 V internal reference range.

Do not treat AD976ARSZ and AD976A as interchangeable without checking acquisition timing and downstream clocking. The AD976A provides 200 kSPS compared with 100 kSPS for AD976, a 100% throughput increase that changes sample interval and potentially acquisition behavior. Likewise, confirm the exact AD976AR suffix and package before substituting it for AD976ARSZ, because package, temperature, and lead-finish characters can change the orderable configuration.

The 28-pin parallel interface requires deliberate endpoint placement. Arrange the converter and destination processor or FPGA so the sixteen output traces are short, matched where timing margin is limited, and not routed beneath noisy analog or switching sections. Provide a clear return path and avoid breakout routing that forces output signals to cross long bus segments. Validate interface timing at the intended clock or conversion-control frequency.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The industrial ordering information is identified by the distributor listing, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact orderable MPN.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

AD976ARSZ datasheet AD976ARSZ pinout AD976ARSZ datasheet pdf AD976ARSZ specifications AD976ARSZ 16 bit ADC AD976ARSZ 100 kSPS AD976ARSZ 28 pin SSOP Analog Devices AD976ARSZ AD976ARSZ equivalent AD976ARSZ replacement AD976ARSZ vs AD976A AD976ARSZ application circuit AD976ARSZ price AD976ARSZ stock where to buy AD976ARSZ

Komponen dan Istilah Terkait

Analog Devices AD976ARSZ AD976AR AD976A AD976 analog-to-digital converter ADC data converter interface IC successive-approximation ADC SAR ADC switched-capacitor ADC parallel interface 16-bit resolution 100 kSPS 200 kSPS single 5 V supply 2.5 V internal reference 28-pin SSOP skinny SSOP surface-mount package industrial temperature grade anti-alias filter sample-and-hold capacitor instrumentation amplifier process monitoring precision instrumentation communications receiver embedded data acquisition waveform recorder
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ