AD976ARSZ - 16-Bit 100 kSPS SAR ADC | Analog Devices
MPN: AD976ARSZ ✓ NakahandaAD976ARSZ Ulas
An ADC is an interface IC that converts an analog voltage into a digital value. Within the broader semiconductor hierarchy, an ADC belongs to data converters and ultimately to interface ICs. The AD976 family uses successive-approximation conversion to acquire one analog channel, while the parallel digital interface transfers each 16-bit conversion result directly into a microprocessor, digital signal processor, FPGA, or data-capture system.
The AD976ARSZ provides a resolution of 16 bits, a throughput rate of 100 kSPS, and operation from a single 5 V supply. Its internal 2.5 V reference reduces the need for an external precision reference in suitable designs. The device also uses a switched-capacitor ADC architecture, which supports repeatable conversion performance while imposing sampling and acquisition requirements on the source network.
The SSOP package offers a compact surface-mount footprint and exposes the converter's digital outputs in parallel. Parallel interface design can simplify connections to older microprocessors and DSPs because no serial protocol converter is required. The trade-off is a larger pin count than a modern serial-interface ADC and potentially more routing on a high-density printed circuit board.
Typical uses include industrial process monitoring, instrumentation, communications receivers, laboratory measurement equipment, and embedded control systems. The 16-bit resolution is particularly useful when the measured signal occupies much of the converter's input range, allowing smaller changes in voltage to be represented by distinct digital codes. Input bandwidth, acquisition time, reference accuracy, and the complete external analog front end must still be evaluated together.
For reliable layout, place the input network, converter, and digital interface according to the manufacturer's recommended topology. Keep sensitive analog traces short, provide the required bypass capacitance at the supply pins, and route the high-speed digital outputs away from the analog input. Confirm that the signal source can charge the internal sample-and-hold capacitor within the available acquisition interval.
This product record combines the manufacturer's family-level specifications, exact-orderable package information, sourcing fields, application guidance, and replacement analysis in a form that helps engineers plan signal-chain and PCB decisions before releasing a production design.
Mga alternatibo na pwedeng ilagay na AD976ARSZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok AD976ARSZ (parehas na form factor at footprint) — pagkakaiba sa Architecture, Package, Mounting Type, Supply Voltage, Input Type.
AD976AR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AD976ABN
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AD976ARSZ Mga Pinakamataas na Rating at Electrical Characteristics
| Converter Type | Successive-approximation ADC (SAR) |
| Pangangasiwaan | 16 bit |
| Input Channels | 1 channel |
| Rate ng Pagkupita | 100 kSPS |
| Volte ng Pagbibigay | 5 V |
| Internal Reference Voltage | 2.5 V |
| Architecture | Switched-capacitor ADC |
| Digital Interface | Parallel |
| Packhaging | 28-pin SSOP |
| Package Type | Skinny SSOP |
| Uri ng Pagpapasok | Surface mount |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Operating Temperature Grade | Industrial |
Gabay sa Pin Configuration ng AD976ARSZ skinny ssop
Pin configuration para sa AD976ARSZ (skinny ssop package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD976ARSZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD976ARSZ ay nararapat para sa 6 aplikasyons: Industrial Process Monitoring, Precision Instrumentation, Communications Receiver, Embedded Data Acquisition, Conditioned Sensor Interface, Laboratory Waveform Recorder.
Industrial Process Monitoring
The AD976ARSZ fits process-measurement systems that require 16-bit resolution from a single analog channel at up to 100 kSPS. Its single 5 V operation simplifies the power architecture around embedded controllers, while the parallel output can connect directly to a suitable microprocessor, DSP, or FPGA. For temperature, pressure, or chemical-sensor conditioning, the external front end should scale the sensor output into the converter input range and limit source impedance so the switched-capacitor input settles within the acquisition interval. The result is a compact acquisition path for monitoring slow industrial variables without relying on a lower-resolution converter.
Inirekomenda
Precision Instrumentation
The AD976ARSZ is appropriate for laboratory and field instrumentation where a 16-bit measurement result is more useful than a 12- or 14-bit conversion. At 100 kSPS, it can acquire repetitive analog measurements while its internal 2.5 V reference and parallel digital output support a deterministic data path. The analog front end remains critical: use an instrumentation-amplifier or low-noise op-amp stage, establish the correct bipolar input configuration, and select an input RC network that preserves settling accuracy. For slow sensor signals, oversampling can improve effective resolution if the source, reference, and digital averaging are suitably controlled.
Inirekomenda
Communications Receiver
The AD976ARSZ can serve as the sampling element in a communications receiver when the required baseband bandwidth can be represented at 100 kSPS. Its 16-bit resolution preserves small amplitude variations in the received signal, while the parallel interface supports direct connection to digital demodulation hardware. Designers should place anti-alias filtering ahead of the converter and verify that the complete receiver does not demand the 200 kSPS throughput offered by the AD976A. Source impedance, acquisition timing, and clock-jitter sensitivity must be evaluated so that the ADC does not limit channel accuracy.
Inirekomenda
Embedded Data Acquisition
The AD976ARSZ suits embedded acquisition systems that collect one analog channel and transfer each 16-bit result through a parallel bus. Its 100 kSPS rate is adequate for many control, status, and diagnostic waveforms, and the 28-pin SSOP package supports compact surface-mount assembly. The processor interface should account for setup and hold timing on the parallel outputs, while the PCB must separate sensitive input routing from switching nodes. A microcontroller or DSP with a compatible acquisition interface can avoid a serial protocol converter, although the increased pin count should be included in the device layout plan.
Inirekomenda
Conditioned Sensor Interface
The AD976ARSZ can digitize the output of a bridge, transducer, or low-level sensor after suitable amplification and filtering. A 16-bit converter is most useful when the conditioned signal occupies a substantial portion of the input range; otherwise, additional gain improves utilization more than resolution alone. Because the AD976 uses a switched-capacitor input, the selected amplifier must drive the recommended network and settle between conversions. Keep the sensor, instrumentation amplifier, converter, and reference return paths physically close to minimize noise pickup and ground-potential errors.
Inirekomenda
Laboratory Waveform Recorder
The AD976ARSZ can form the core of a low-to-moderate-speed waveform recorder when burst acquisition and 16-bit amplitude resolution are priorities. The parallel interface allows captured samples to be transferred efficiently into digital memory or processed by an FPGA, and the 100 kSPS rate provides 10 ms windows for 1000 samples. The analog front end must provide adequate input bandwidth and low distortion, while the acquisition cycle must preserve the specified sample interval. For faster transients or wider bandwidth, redesign around the 200 kSPS AD976A instead of assuming that extra bandwidth is available without corresponding system changes.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD976ARSZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD976AR | AD976A |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Converter Type | Successive-approximation ADC | Successive-approximation ADC | Successive-approximation ADC |
| Resolution | 16 bit | 16 bit | 16 bit |
| Sampling Rate | 100 kSPS | 100 kSPS | 200 kSPS |
| Input Channels | 1 | 1 | 1 |
| Supply Voltage | 5 V | 5 V | 5 V |
| Internal Reference | 2.5 V | 2.5 V | 2.5 V |
| Digital Interface | Parallel | Parallel | Parallel |
| Architecture | Switched-capacitor | Switched-capacitor | Switched-capacitor |
Pangunahing mga Pagkakaiba
- Matches the 100 kSPS AD976 throughput requirement without increasing the sample rate (kumpara saAD976A)
- Maintains 16-bit resolution and single 5 V operation within the same family (kumpara saAD976A)
- Uses the same 16-bit parallel-output architecture for direct digital acquisition (kumpara saAD976AR)
Talaan ng Disenyo
Use the manufacturer's recommended input network and verify acquisition at the lowest operating sample rate. A high-impedance sensor or slow amplifier may not charge the switched-capacitor input quickly enough, producing gain-dependent settling error. Confirm source impedance, the recommended input capacitor, and settling margin in the datasheet application circuit rather than sizing the network from the 100 kSPS headline rate alone.
Place the bypass capacitor and converter close to their associated supply pins, and route the analog input away from switching nodes and parallel output traces. Use a compact, continuous ground path for the analog return and keep the input node small to minimize parasitic capacitance. A quiet reference and short supply-current path reduce supply coupling into the conversion result, particularly when the input signal is small relative to the 2.5 V internal reference range.
Do not treat AD976ARSZ and AD976A as interchangeable without checking acquisition timing and downstream clocking. The AD976A provides 200 kSPS compared with 100 kSPS for AD976, a 100% throughput increase that changes sample interval and potentially acquisition behavior. Likewise, confirm the exact AD976AR suffix and package before substituting it for AD976ARSZ, because package, temperature, and lead-finish characters can change the orderable configuration.
The 28-pin parallel interface requires deliberate endpoint placement. Arrange the converter and destination processor or FPGA so the sixteen output traces are short, matched where timing margin is limited, and not routed beneath noisy analog or switching sections. Provide a clear return path and avoid breakout routing that forces output signals to cross long bus segments. Validate interface timing at the intended clock or conversion-control frequency.
Impormasyon ng Pagsunod sa Kautusan
The industrial ordering information is identified by the distributor listing, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact orderable MPN.