ADC1002S020HL/C1 - 10-bit 20MSPS ADC, LQFP-32 | NXP
MPN: ADC1002S020HL/C1 ✓ AktifADC1002S020HL/C1 Ringkasan
An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that samples a continuous analog input voltage and quantizes it into a discrete digital code. A 10-bit ADC produces 1024 discrete codes (LSB = full-scale / 1024), and at 20 MSPS the converter can accurately capture baseband video and intermediate-frequency signals well below the Nyquist frequency of 10 MHz. In the broader system hierarchy, the ADC1002S020 sits between an analog front-end (amplifier/filter) and a digital back-end (ASIC, FPGA, or DSP), occupying the data-acquisition tier of the signal chain alongside sample-and-hold circuits, voltage references, and clock generators.
Key features include 10-bit resolution, 20 MSPS maximum sampling rate, a single 3.0 V to 5.25 V analog supply with CMOS-compatible digital I/O, an integrated pipeline architecture, and a power-saving standby mode. The parallel data interface simplifies connection to FPGAs, microcontrollers, or display controllers without requiring a high-speed serial deserializer.
The device uses a pipelined architecture with an internal reference ladder to deliver consistent linearity across the input range, and differential analog inputs maximize common-mode rejection for noisy environments. The 20 MSPS sample rate provides ample headroom for standard-definition digital video and IF digitization.
Typical applications include professional video digitization, IF signal sampling, instrumentation, and general-purpose data acquisition. The wide analog supply range (3.0 V to 5.25 V) lets the part coexist with 3.3 V and 5 V system rails. The integrated standby mode and CMOS I/O further simplify power-constrained portable designs.
When designing with this ADC, ensure the analog input drive network is low-impedance at the Nyquist frequency to preserve SFDR. Decouple AVDD and DVDD separately with 100 nF and 10 uF capacitors placed as close to the pins as possible, and provide a clean low-jitter clock to the CLK input to maximize SNR.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path to in-system validation.
Alternatif penggantian untuk ADC1002S020HL/C1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ADC1002S020HL/C1 (sama faktor bentuk dan footprint) — berbeda di dalam Data Interface, Package, Sampling Rate, Standby Mode.
ADC1002S020HL/C1:1
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADC1002S020HL
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADC1002S020HL-C1
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADC1002S020HL/C1 Rating Maksimal & Karakteristik Listrik
| Resolusi | 10 bits |
| Number of Channels | 1 |
| Laju Pengambilan Sampel | 20 MSPS |
| Analog Supply Voltage | 3.0 V to 5.25 V |
| Input Type | Differential |
| Data Interface | Parallel |
| Architecture | Pipelined |
| Paket | 32-LQFP (SOT401-1), 5 x 5 x 1.4 mm |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -20 C to +75 C |
| Temperature Grade | Commercial |
| Digital I/O Compatibility | CMOS |
| Standby Mode | Yes |
| Status RoHS | Compliant |
Konfigurasi Pin ADC1002S020HL/C1
| Pin produk 1 | D9 — Data output bit 9 (MSB) |
| Pin produk 2 | D8 — Data output bit 8 |
| Pin produk 3 | D7 — Data output bit 7 |
| Pin produk 4 | D6 — Data output bit 6 |
| Pin produk 5 | D5 — Data output bit 5 |
| Pin produk 6 | D4 — Data output bit 4 |
| Pin produk 7 | D3 — Data output bit 3 |
| Pin produk 8 | D2 — Data output bit 2 |
| Pin produk 9 | D1 — Data output bit 1 |
| Pin produk 10 | D0 — Data output bit 0 (LSB) |
| Pin produk 11 | DVDD — Digital supply voltage |
| Pin produk 12 | DGND — Digital ground |
| Pin produk 13 | STBY — Standby mode control |
| Pin produk 14 | OE — Output enable |
| Pin produk 15 | CLK — Clock input |
| Pin produk 16 | CLKDLY — Clock delay control |
| Pin produk 17 | DGND — Digital ground |
| Pin produk 18 | DVDD — Digital supply voltage |
| Pin produk 19 | AGND — Analog ground |
| Pin produk 20 | REFIN — Reference input |
| Pin produk 21 | REFOUT — Reference output |
| Pin produk 22 | AVDD — Analog supply voltage |
| Pin produk 23 | AGND — Analog ground |
| Pin produk 24 | AIN+ — Analog input positive |
| Pin produk 25 | AIN- — Analog input negative |
| Pin produk 26 | AGND — Analog ground |
| Pin produk 27 | AVDD — Analog supply voltage |
| Pin produk 28 | NC — Not connected |
| Pin produk 29 | NC — Not connected |
| Pin produk 30 | NC — Not connected |
| Pin produk 31 | NC — Not connected |
| Pin produk 32 | NC — Not connected |
Aplikasi Umum
ADC1002S020HL/C1 cocok untuk 6 aplikasis: Professional Video Digitization, IF Signal Sampling, Industrial Data Acquisition, Medical Imaging Front-End, Test and Measurement Instrumentation, CCD/CIS Sensor Digitization.
Professional Video Digitization
The ADC1002S020HL/C1's 10-bit resolution at 20 MSPS makes it well-suited for digitizing standard-definition analog video signals up to the Nyquist limit of 10 MHz. Its differential analog inputs reject common-mode noise from long cable runs typical in broadcast and studio environments, while the parallel CMOS interface streams pixel data directly to FPGA video processing pipelines. The wide 3.0 V to 5.25 V analog supply range allows operation from 3.3 V or 5 V system rails commonly used in professional video equipment.
Direkomendasikan
IF Signal Sampling
For intermediate-frequency (IF) signal sampling in communications receivers, the ADC1002S020HL/C1 delivers the 20 MSPS throughput needed to capture IF bands below 10 MHz with adequate alias protection. According to the datasheet, its pipelined architecture and differential input structure preserve signal integrity, while the integrated standby mode allows power gating between receive bursts. The 32-LQFP package is small enough for compact radio designs.
Direkomendasikan
Industrial Data Acquisition
The ADC1002S020HL/C1 supports industrial multi-channel data-acquisition systems where 10-bit resolution at 20 MSPS is sufficient for vibration, acoustic, or process-control signal capture. According to the datasheet, its commercial temperature grade of -20 C to +75 C covers most factory-floor enclosures, and the parallel output simplifies interfacing to legacy microcontrollers. Standby mode allows per-channel power gating in multiplexed architectures.
Direkomendasikan
Medical Imaging Front-End
In ultrasound and endoscopy front-ends, the ADC1002S020HL/C1's 20 MSPS sample rate captures returning echo signals while the 10-bit resolution preserves dynamic range for diagnostic interpretation. The differential input structure minimizes pickup from adjacent high-voltage pulser circuitry. The 32-LQFP package is hand-solderable for prototype builds, while the commercial temperature grade suits controlled clinical environments.
Direkomendasikan
Test and Measurement Instrumentation
The ADC1002S020HL/C1 integrates well into digital oscilloscope, spectrum analyzer, and bench instrumentation front-ends where 10-bit resolution at 20 MSPS is sufficient for mid-tier measurement accuracy. Its parallel output interface directly drives display controllers or buffer memory without requiring serializer overhead. The 3.0 V to 5.25 V supply range accommodates both analog and digital rail combinations in mixed-signal instruments.
Direkomendasikan
CCD/CIS Sensor Digitization
For line-scan or area-scan CCD/CIS imaging applications, the ADC1002S020HL/C1's 20 MSPS sample rate matches the pixel clock rates typical of mid-resolution image sensors. The differential input structure rejects switching noise from nearby sensor drivers, while the parallel CMOS outputs feed directly into image signal processors (ISPs) or FPGAs. Standby mode enables per-line power gating to reduce sensor-board power consumption.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADC1002S020HL/C1 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADC1002S020HL/C1:1 | ADC1002S020HL | ADC1002S020HL-C1 | ADS7813UB/1K | ADC081S051CISDX/NOPB |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (SOT401-1) | 32-LQFP (SOT401-1) - same | 32-LQFP (SOT401-1) - same | 32-LQFP (SOT401-1) - same | SOIC-28 | 8-WSON |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | Renesas Electronics | Texas Instruments | Texas Instruments |
| Resolution | 10 bits | 10 bits | 10 bits | 10 bits | 12 bits | 8 bits |
| Data Interface | Parallel | Parallel | Parallel | Parallel | Serial | SPI/Serial |
| Architecture | Pipelined | Pipelined | Pipelined | Pipelined | SAR | SAR |
| Input Type | Differential | Differential | Differential | Differential | Single-ended | Single-ended |
Diferensiator Kunci
- Pipelined architecture at 20 MSPS in 32-LQFP (vsADS7813UB/1K)
- Differential analog inputs with parallel CMOS output (vsADC081S051CISDX/NOPB)
- Wide 3.0 V to 5.25 V analog supply range (vsADC1002S020HL-C1 (Renesas))
Catatan Desain
Estimated: Decouple AVDD and DVDD separately with 100 nF ceramic capacitors placed within 5 mm of the supply pins, plus a 10 uF bulk capacitor on each rail. According to the NXP datasheet, the ADC draws separate currents for analog and digital sections; mixed decoupling prevents switching noise on the digital rail from coupling into the analog sampling path. For systems with shared supplies, place a ferrite bead between AVDD and DVDD upstream of the local capacitors.
Route the analog differential input pair (AIN+, AIN-) as a matched-impedance, length-matched pair with continuous ground reference beneath. According to the NXP datasheet typical application, the analog inputs should be AC-coupled with 10 nF capacitors to remove DC offset. Keep the clock trace short and isolated from the analog inputs to minimize jitter injection into the sampling instant, which directly degrades SNR.
Drive the CLK input with a low-jitter, fast-edge clock source (jitter < 5 ps RMS) to maximize SNR. According to the NXP datasheet, SNR is directly degraded by aperture uncertainty at the sampling instant. Place a clock buffer close to the ADC if the source is shared with other devices, and use a controlled-impedance trace with a series termination resistor matched to the source impedance to prevent overshoot.
Do not operate the ADC1002S020HL/C1 above 5.25 V on AVDD - permanent damage will occur. The standby pin must be driven logic-high or logic-low; leaving it floating can cause unpredictable supply current. The exposed thermal pad of the LQFP-32 must be soldered to a ground copper pour for proper thermal and electrical performance - omitting this pad connection can cause thermal shutdown under continuous 20 MSPS operation at 5.25 V supply.
Informasi Konformitas
RoHS and REACH compliant per NXP product page. Commercial temperature grade; not AEC-Q100 qualified. Lead-free per JEDEC J-STD-020.
