ADF4157BRUZ-RL7 - 6 GHz Fractional-N PLL | Analog Devices
MPN: ADF4157BRUZ-RL7 ✓ AktifADF4157BRUZ-RL7 Ringkasan
A fractional-N frequency synthesizer is a phase-locked-loop device that generates an output frequency related to a reference frequency through integer and fractional division. In the broader semiconductor hierarchy, it belongs to the PLL, frequency synthesizer, clock-generation, and signal-chain IC families. The sigma-delta fractional interpolator permits fractional feedback while preserving fine frequency resolution, making the architecture useful when exact frequencies are required without a large programmable divider.
The ADF4157 supports RF operation through 6 GHz, a 3.3 V power supply, programmable charge-pump currents, a programmable reference divider, and a separate VP supply that allows an extended tuning-voltage range. A three-wire serial interface provides configuration access, while digital lock detect and power-down functions support system supervision and power management. These functions make the synthesizer suitable for controlled RF signal generation where the output must be digitally programmed.
Internally, the low-noise digital phase-frequency detector compares the divided feedback signal with the reference, while the precision charge pump drives the external loop filter. The INT and FRAC register fields define the integer and fractional division values. The sigma-delta fractional interpolator modulates the feedback division ratio, and the resulting phase error is corrected through the charge pump and tuning-voltage network. The design combines integer-N frequency steps with fractional resolution across the supported RF range.
Typical applications include RF transceiver local-oscillator generation, wireless communication equipment, test and measurement instruments, microwave synthesizers, and clocking systems requiring programmable fractional frequency division. The 6 GHz operating ceiling is particularly relevant to microwave and high-band RF designs, while the subhertz resolution supports fine channel spacing and precision calibration. The industrial temperature range of -40°C to +85°C supports operation across industrial environments.
Layout quality directly affects phase noise and loop stability. Place the reference and feedback paths away from noisy digital return currents, use a low-inductance ground connection, and position the loop-filter components close to the charge-pump and tuning-voltage pins. Review the Analog Devices evaluation-board layout and the recommended component values in the ADF4157 datasheet before setting loop bandwidth for a new reference frequency or output channel.
This product overview combines the ADF4157 architecture, package information, operating limits, and design considerations with sourcing guidance for the exact ADF4157BRUZ-RL7 ordering code. It also distinguishes the real 16-pin TSSOP variant from the 20-pin LFCSP option and clarifies where complete pin assignments, register definitions, and absolute maximum ratings must be confirmed in the manufacturer documentation.
Alternatif penggantian untuk ADF4157BRUZ-RL7 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
ADF4157BRUZ-RL
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADF4157BRUZ-RL7 Spesifikasi
| Device Type | Fractional-N frequency synthesizer |
| Maximum RF Frequency | 6 GHz |
| Fixed Modulus | 25 bit |
| Frequency Resolution | Subhertz at 6 GHz |
| Tegangan Pemuat | 3.3 V |
| VP Supply | Separate supply for extended tuning-voltage range |
| Control Interface | 3-wire serial interface |
| Charge Pump Current | Programmable |
| Reference Divider | Programmable |
| Lock Detection | Digital lock detect |
| Power-Down Function | Supported |
| Rentang Suhu Kerja | -40°C to +85°C |
| Paket | 16-pin TSSOP, 4.40 mm width |
| Tipe Mounting | Surface mount |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
ADF4157BRUZ-RL7 16-pin tssop, 4.40 mm width Diamant Konfigurasi Panduan
Konfigurasi pin untuk ADF4157BRUZ-RL7 (16-pin tssop, 4.40 mm width pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk ADF4157BRUZ-RL7.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ADF4157BRUZ-RL7 cocok untuk 6 aplikasis: RF Transceiver Local Oscillator, Wireless Communication RF Signal Generation, Test and Measurement Instrumentation, Microwave Frequency Synthesizer, Programmable RF Clock Source, Industrial RF Calibration System.
RF Transceiver Local Oscillator
The ADF4157BRUZ-RL7 fits programmable RF local-oscillator generation because it operates through 6 GHz and uses a 25-bit fixed modulus to obtain subhertz frequency resolution at 6 GHz. The fractional-N architecture permits fine output-frequency adjustments without relying exclusively on integer divider steps. A three-wire serial interface simplifies programming from the transceiver control logic, while programmable charge-pump currents and the reference divider support adaptation to different reference conditions. The principal design consideration is loop stability: place the loop-filter components close to the charge-pump and tuning pins, and verify the filter values against the selected reference and output frequency.
Direkomendasikan
Wireless Communication RF Signal Generation
The ADF4157BRUZ-RL7 supports wireless communication RF signal generation with output operation up to 6 GHz and subhertz resolution at that frequency. Its sigma-delta fractional interpolator allows fractional feedback division, while the integer and fractional fields define the programmed synthesis ratio. This combination is useful when a system must select closely spaced channels or maintain precise calibration across multiple operating bands. The 3.3 V supply and separate VP connection simplify power planning, although the loop filter and reference divider must be configured for the actual reference source. Proper grounding and isolation of the feedback path are essential for stable phase-noise performance.
Direkomendasikan
Test and Measurement Instrumentation
The ADF4157BRUZ-RL7 is suitable for test and measurement equipment that requires a programmable, high-resolution RF source. Its 6 GHz maximum frequency supports microwave-oriented test systems, while subhertz resolution at 6 GHz enables fine frequency settings for calibration and characterization. The three-wire serial control interface allows automated equipment to configure the integer divider, fractional divider, charge-pump setting, and reference-divider value. Digital lock detect provides a status signal for sequencing measurements. Designers should use the manufacturer evaluation layout as a starting point and keep sensitive reference and feedback routing away from switching and digital-return paths to preserve phase-noise performance.
Direkomendasikan
Microwave Frequency Synthesizer
The ADF4157BRUZ-RL7 can serve as the core frequency synthesizer in a microwave signal source because it supports RF operation through 6 GHz and provides subhertz resolution at that upper limit. The precision charge pump, programmable reference divider, and sigma-delta fractional interpolator provide flexible division control for generating accurately placed output frequencies. A separate VP connection permits an extended tuning-voltage range when paired with a suitable charge-pump and loop-filter network. Achieving good phase noise requires careful component selection in the loop filter, short return paths, clean supply connections, and a low-phase-noise reference. The digital lock-detect output can support automated acquisition sequencing.
Direkomendasikan
Programmable RF Clock Source
The ADF4157BRUZ-RL7 can generate a programmable RF clock for systems that require precise frequency selection over a broad output range. Its 25-bit fixed modulus supports subhertz resolution at 6 GHz, while the programmable reference divider accommodates the reference frequency used in a particular design. The serial interface reduces the control-pin count compared with parallel programming, leaving more board area for filtering and routing. Because this is a PLL-based architecture, reference spurs and loop phase noise depend on the external loop filter and layout. Engineers should reproduce the manufacturer evaluation-board component choices first, then optimize loop bandwidth and charge-pump current for the required settling time.
Direkomendasikan
Industrial RF Calibration System
The ADF4157BRUZ-RL7 fits industrial RF calibration systems that need repeatable, digitally programmed frequencies up to 6 GHz. The fractional-N divider permits fine resolution for calibration points, and the -40°C to +85°C operating range supports industrial temperature conditions. Digital lock detect and power-down functions help coordinate sequencing and reduce power when the instrument is idle. For reliable results, keep the reference input clean, use stable high-quality divider and filter components, and provide a low-impedance ground path around the synthesizer. The external loop-filter values should be recalculated for each reference frequency or required lock-time target rather than copied without verification.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADF4157BRUZ-RL7 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADF4157BRUZ-RL |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 16-pin TSSOP, 4.40 mm width | 16-pin TSSOP |
| Product Type | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer |
| Maximum RF Frequency | 6 GHz | 6 GHz |
| Fixed Modulus | 25 bit | 25 bit |
| Frequency Resolution | Subhertz at 6 GHz | Subhertz at 6 GHz |
| Supply Voltage | 3.3 V | 3.3 V |
| Control Interface | 3-wire serial interface | 3-wire serial interface |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C |
Diferensiator Kunci
- Exact 16-pin TSSOP board compatibility (vsADF4157BCPZ)
- Subhertz resolution at the upper operating limit (vsADF4157BRUZ-RL)
- Digital RF synthesis with independent tuning supply (vsADF4157BCPZ)
Catatan Desain
Use the Analog Devices ADF4157 evaluation-board layout as the starting point for reference routing, grounding, and loop-filter placement. Keep the reference and feedback paths away from digital switching nodes and high-current return paths. Connect the charge-pump and tuning-voltage network close to the relevant device pins with short, low-inductance traces, and provide a quiet ground reference for the sensitive analog section.
Plan the 3.3 V supply and separate VP connection according to the manufacturer datasheet, including the required decoupling network and voltage range for the external tuning network. Keep switching-regulator and digital-supply routing away from the VP and charge-pump nodes. Verify the final supply levels at the pins under maximum programming settings because VP headroom affects the available tuning-voltage range.
Do not treat the 16-pin TSSOP ADF4157BRUZ device as interchangeable with the 20-pin LFCSP ADF4157BCPZ. Also avoid reusing one loop-filter design across unrelated reference frequencies without checking settling time, phase noise, and charge-pump requirements. Confirm the complete ordering suffix and use the manufacturer register and pin tables when creating PCB artwork or replacement documentation.
Informasi Konformitas
The available manufacturer product and distributor information does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for this ordering code.