Analog Devices

ADF4157BRUZ-RL7 - 6 GHz Fractional-N PLL | Analog Devices

Référence : ADF4157BRUZ-RL7 ✓ Actif
3.3 V Vdss Programmable Id 16-pin TSSOP, 4.40 mm width Package 6 GHz Speed
MOQ : 1 |

ADF4157BRUZ-RL7 Présentation

The Analog Devices ADF4157BRUZ-RL7 is a high-resolution 6 GHz fractional-N frequency synthesizer with a 25-bit fixed modulus and subhertz frequency resolution at 6 GHz, packaged in a 16-pin TSSOP. The device combines a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, and a sigma-delta fractional interpolator for precise RF clock and frequency generation.

A fractional-N frequency synthesizer is a phase-locked-loop device that generates an output frequency related to a reference frequency through integer and fractional division. In the broader semiconductor hierarchy, it belongs to the PLL, frequency synthesizer, clock-generation, and signal-chain IC families. The sigma-delta fractional interpolator permits fractional feedback while preserving fine frequency resolution, making the architecture useful when exact frequencies are required without a large programmable divider.

The ADF4157 supports RF operation through 6 GHz, a 3.3 V power supply, programmable charge-pump currents, a programmable reference divider, and a separate VP supply that allows an extended tuning-voltage range. A three-wire serial interface provides configuration access, while digital lock detect and power-down functions support system supervision and power management. These functions make the synthesizer suitable for controlled RF signal generation where the output must be digitally programmed.

Internally, the low-noise digital phase-frequency detector compares the divided feedback signal with the reference, while the precision charge pump drives the external loop filter. The INT and FRAC register fields define the integer and fractional division values. The sigma-delta fractional interpolator modulates the feedback division ratio, and the resulting phase error is corrected through the charge pump and tuning-voltage network. The design combines integer-N frequency steps with fractional resolution across the supported RF range.

Typical applications include RF transceiver local-oscillator generation, wireless communication equipment, test and measurement instruments, microwave synthesizers, and clocking systems requiring programmable fractional frequency division. The 6 GHz operating ceiling is particularly relevant to microwave and high-band RF designs, while the subhertz resolution supports fine channel spacing and precision calibration. The industrial temperature range of -40°C to +85°C supports operation across industrial environments.

Layout quality directly affects phase noise and loop stability. Place the reference and feedback paths away from noisy digital return currents, use a low-inductance ground connection, and position the loop-filter components close to the charge-pump and tuning-voltage pins. Review the Analog Devices evaluation-board layout and the recommended component values in the ADF4157 datasheet before setting loop bandwidth for a new reference frequency or output channel.

This product overview combines the ADF4157 architecture, package information, operating limits, and design considerations with sourcing guidance for the exact ADF4157BRUZ-RL7 ordering code. It also distinguishes the real 16-pin TSSOP variant from the 20-pin LFCSP option and clarifies where complete pin assignments, register definitions, and absolute maximum ratings must be confirmed in the manufacturer documentation.

Alternatives de remplacement direct pour ADF4157BRUZ-RL7 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

ADF4157BRUZ-RL

✅ Remplacement direct
📦 16-pin TSSOP
Final ordering suffix differs by 0%; both use the 16-pin TSSOP ADF4157 configuration with 6 GHz operation and a 25-bit fixed modulus

📋 Alternative de référence (hors catalogue)

ADF4157BRUZ-RL7 Spécifications

Device Type Fractional-N frequency synthesizer
Maximum RF Frequency 6 GHz
Fixed Modulus 25 bit
Frequency Resolution Subhertz at 6 GHz
Tension d'alimentation 3.3 V
VP Supply Separate supply for extended tuning-voltage range
Control Interface 3-wire serial interface
Charge Pump Current Programmable
Reference Divider Programmable
Lock Detection Digital lock detect
Power-Down Function Supported
Plage de température de fonctionnement -40°C to +85°C
Boîtier 16-pin TSSOP, 4.40 mm width
Type de montage Surface mount
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification not_applicable
Lead-Free Status unknown
Halogen-Free Status unknown

Guide de configuration des broches du ADF4157BRUZ-RL7 16-pin tssop, 4.40 mm width

Configuration des broches du ADF4157BRUZ-RL7 (boîtier 16-pin tssop, 4.40 mm width). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-pin tssop, 4.40 mm width pour le ADF4157BRUZ-RL7

Aucune donnée de brochage détaillée disponible pour ADF4157BRUZ-RL7.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADF4157BRUZ-RL7 convient pour 6 applications: RF Transceiver Local Oscillator, Wireless Communication RF Signal Generation, Test and Measurement Instrumentation, Microwave Frequency Synthesizer, Programmable RF Clock Source, Industrial RF Calibration System.

🌐

RF Transceiver Local Oscillator

The ADF4157BRUZ-RL7 fits programmable RF local-oscillator generation because it operates through 6 GHz and uses a 25-bit fixed modulus to obtain subhertz frequency resolution at 6 GHz. The fractional-N architecture permits fine output-frequency adjustments without relying exclusively on integer divider steps. A three-wire serial interface simplifies programming from the transceiver control logic, while programmable charge-pump currents and the reference divider support adaptation to different reference conditions. The principal design consideration is loop stability: place the loop-filter components close to the charge-pump and tuning pins, and verify the filter values against the selected reference and output frequency.

🌐

Wireless Communication RF Signal Generation

The ADF4157BRUZ-RL7 supports wireless communication RF signal generation with output operation up to 6 GHz and subhertz resolution at that frequency. Its sigma-delta fractional interpolator allows fractional feedback division, while the integer and fractional fields define the programmed synthesis ratio. This combination is useful when a system must select closely spaced channels or maintain precise calibration across multiple operating bands. The 3.3 V supply and separate VP connection simplify power planning, although the loop filter and reference divider must be configured for the actual reference source. Proper grounding and isolation of the feedback path are essential for stable phase-noise performance.

📡

Test and Measurement Instrumentation

The ADF4157BRUZ-RL7 is suitable for test and measurement equipment that requires a programmable, high-resolution RF source. Its 6 GHz maximum frequency supports microwave-oriented test systems, while subhertz resolution at 6 GHz enables fine frequency settings for calibration and characterization. The three-wire serial control interface allows automated equipment to configure the integer divider, fractional divider, charge-pump setting, and reference-divider value. Digital lock detect provides a status signal for sequencing measurements. Designers should use the manufacturer evaluation layout as a starting point and keep sensitive reference and feedback routing away from switching and digital-return paths to preserve phase-noise performance.

📡

Microwave Frequency Synthesizer

The ADF4157BRUZ-RL7 can serve as the core frequency synthesizer in a microwave signal source because it supports RF operation through 6 GHz and provides subhertz resolution at that upper limit. The precision charge pump, programmable reference divider, and sigma-delta fractional interpolator provide flexible division control for generating accurately placed output frequencies. A separate VP connection permits an extended tuning-voltage range when paired with a suitable charge-pump and loop-filter network. Achieving good phase noise requires careful component selection in the loop filter, short return paths, clean supply connections, and a low-phase-noise reference. The digital lock-detect output can support automated acquisition sequencing.

⚡

Programmable RF Clock Source

The ADF4157BRUZ-RL7 can generate a programmable RF clock for systems that require precise frequency selection over a broad output range. Its 25-bit fixed modulus supports subhertz resolution at 6 GHz, while the programmable reference divider accommodates the reference frequency used in a particular design. The serial interface reduces the control-pin count compared with parallel programming, leaving more board area for filtering and routing. Because this is a PLL-based architecture, reference spurs and loop phase noise depend on the external loop filter and layout. Engineers should reproduce the manufacturer evaluation-board component choices first, then optimize loop bandwidth and charge-pump current for the required settling time.

🏭

Industrial RF Calibration System

The ADF4157BRUZ-RL7 fits industrial RF calibration systems that need repeatable, digitally programmed frequencies up to 6 GHz. The fractional-N divider permits fine resolution for calibration points, and the -40°C to +85°C operating range supports industrial temperature conditions. Digital lock detect and power-down functions help coordinate sequencing and reduce power when the instrument is idle. For reliable results, keep the reference input clean, use stable high-quality divider and filter components, and provide a low-impedance ground path around the synthesizer. The external loop-filter values should be recalculated for each reference frequency or required lock-time target rather than copied without verification.

What is the ADF4157BRUZ-RL7?
The ADF4157BRUZ-RL7 is a 6 GHz fractional-N frequency synthesizer from Analog Devices with a 25-bit fixed modulus and subhertz frequency resolution at 6 GHz. According to the Analog Devices ADF4157 datasheet, Revision D, it combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, and sigma-delta fractional interpolator. This exact ordering code uses a 16-pin TSSOP package.
What are the key specifications of ADF4157BRUZ-RL7?
The ADF4157BRUZ-RL7 supports RF frequencies through 6 GHz, uses a 25-bit fixed modulus, and operates from a 3.3 V power supply. The Analog Devices ADF4157 datasheet, Revision D, also identifies programmable charge-pump currents, a programmable reference divider, a three-wire serial interface, digital lock detect, power-down support, and an operating range of -40°C to +85°C.
Where can I download the ADF4157BRUZ-RL7 datasheet PDF?
The official ADF4157 documentation is available through the Analog Devices ADF4157 product page at https://www.analog.com/en/products/adf4157.html. Select the Data Sheet document, which is identified in the product documentation as Revision D. The document contains the architecture, register descriptions, electrical characteristics, pin assignments, and application information for the ADF4157 family.
Where can I find the ADF4157BRUZ-RL7 pinout?
Use the pin-description table and package drawing in the Analog Devices ADF4157 datasheet, Revision D, to assign every pin for the 16-pin TSSOP version. The manufacturer documentation identifies the exact ADF4157BRUZ-RL7 footprint and its pin functions. Do not substitute the 20-pin LFCSP pinout because the two packages have different lead counts and different exposed-pad arrangements.
What frequency resolution does the ADF4157BRUZ-RL7 provide?
The ADF4157BRUZ-RL7 provides subhertz frequency resolution at 6 GHz through its 25-bit fixed-modulus fractional-N architecture. According to the Analog Devices ADF4157 datasheet, Revision D, the sigma-delta fractional interpolator modulates the feedback division ratio while the integer and fractional fields determine the programmed division behavior. The resulting resolution is suitable for precise RF channel generation.
Is the ADF4157BRUZ-RL7 suitable for RF transceiver local oscillators?
Yes, the ADF4157BRUZ-RL7 is suitable for programmable RF local-oscillator generation because it supports operation through 6 GHz, offers subhertz resolution at 6 GHz, and includes a programmable reference divider and charge-pump current. According to the Analog Devices ADF4157 datasheet, Revision D, the sigma-delta fractional interpolator permits fine frequency settings suitable for high-resolution RF signal generation.
How does the ADF4157BRUZ-RL7 compare with ADF4157BRUZ-RL?
ADF4157BRUZ-RL7 and ADF4157BRUZ-RL are identified as the same 16-pin TSSOP ADF4157 family version, with the final suffix distinguishing the tape-and-reel ordering option. Their device function remains the 6 GHz fractional-N synthesizer with a 25-bit fixed modulus. The manufacturer product page lists the ADF4157 family as production, and the package-specific suffix should be retained when preparing a new BOM.
When should I choose the ADF4157BRUZ-RL7 over a 20-pin ADF4157BCPZ?
Choose the ADF4157BRUZ-RL7 when the PCB is designed specifically for the 16-pin TSSOP ADF4157BRUZ footprint and a tape-and-reel manufacturing flow. The ADF4157BCPZ uses a 20-pin LFCSP with an exposed pad, so it is not a pin-for-pin board replacement. Both belong to the 6 GHz ADF4157 family, but package choice must follow the original PCB land pattern.
What can replace the ADF4157BRUZ-RL7?
The closest identified same-package ordering alternative is the ADF4157BRUZ-RL, which uses the same 16-pin TSSOP ADF4157 family configuration. It differs in its final ordering suffix rather than in synthesizer frequency, fixed modulus, interface, or package. Because no five distinct pin-compatible options are documented, broader alternatives should be checked against the complete ADF4157 datasheet before PCB reuse.
Is the ADF4157BRUZ-RL7 a drop-in replacement for another frequency synthesizer?
The ADF4157BRUZ-RL7 should be treated as a drop-in option only when the replacement has the same 16-pin TSSOP footprint and identical pin assignments, power rails, reference interface, and programming model. The verified cross-reference results identify the ADF4157BRUZ-RL family ordering option and the different-package ADF4157BCPZ. A different package cannot serve as a drop-in replacement without PCB changes.
What is the best Analog Devices equivalent for the ADF4157BRUZ-RL7?
The closest Analog Devices ordering equivalent identified for the ADF4157BRUZ-RL7 is ADF4157BRUZ-RL, which retains the 16-pin TSSOP package and ADF4157 fractional-N synthesizer architecture. The ADF4157BCPZ is also an Analog Devices family member, but its 20-pin LFCSP package prevents direct replacement on the same PCB. Confirm the exact suffix, package, and programming requirements before substitution.
Where can I buy the ADF4157BRUZ-RL7 and check current availability?
Use the Request a Quote form on this page to request the current availability, minimum order quantity, and lead time for the exact ADF4157BRUZ-RL7 ordering code. The manufacturer lists the ADF4157 family as production, but current stock and delivery schedules can change by lot and region. Include the 16-pin TSSOP package requirement in the request to avoid an unsuitable package variant.
What is the price of the ADF4157BRUZ-RL7?
Current commercial pricing for the ADF4157BRUZ-RL7 should be obtained through the Request a Quote form on this page. The form supports an exact MPN inquiry so the quotation can reflect the required quantity, packaging, and current availability. Compare the requested 16-pin TSSOP tape-and-reel variant against the base family only after confirming the complete ordering code.
What is the lead time for the ADF4157BRUZ-RL7?
Request the current lead time through the Request a Quote form on this page. Lead time depends on lot availability, requested quantity, and the delivery destination, so it should be confirmed for the exact ADF4157BRUZ-RL7 ordering code. The Analog Devices product page identifies the ADF4157 as production, which confirms current product intent but does not guarantee immediate shipment.
Is the ADF4157BRUZ-RL7 currently in stock?
The current stock status for the ADF4157BRUZ-RL7 is best obtained through the Request a Quote form on this page. The manufacturer lists the ADF4157 family as production, while distributor inventory can vary by package suffix and lot. Specify the full MPN and required quantity in the request to receive an availability confirmation for the 16-pin TSSOP version.
What design considerations apply when using the ADF4157BRUZ-RL7?
Keep the reference and feedback paths away from noisy digital return paths, use a low-inductance ground connection, and place loop-filter components close to the charge-pump and tuning-voltage pins. According to the Analog Devices ADF4157 datasheet, Revision D, the device includes programmable charge-pump current and a separate VP supply for an extended tuning-voltage range. The recommended loop-filter values should be recalculated when the reference or output frequency changes.

Données de référence d'ingénierie pour ADF4157BRUZ-RL7 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the ADF4157BRUZ-RL7 when the design requires a programmable 6 GHz fractional-N synthesizer in the 16-pin TSSOP package and the PCB was laid out for that footprint. It offers a 25-bit fixed modulus, subhertz resolution at 6 GHz, a programmable reference divider, programmable charge-pump currents, and a separate VP supply. ADF4157BRUZ-RL is the closest same-package ordering alternative when its exact suffix meets the manufacturing requirement. Do not select ADF4157BCPZ for direct board replacement because its 20-pin LFCSP package requires a different footprint. For applications using other PLL families, compare reference-divider range, required VCO tuning voltage, minimum programmable output frequency, register compatibility, and loop-filter requirements before treating any device as interchangeable.

Comparaison avec les alternatives

Paramètre Ce produit ADF4157BRUZ-RL
Brand Analog Devices Analog Devices
Package 16-pin TSSOP, 4.40 mm width 16-pin TSSOP
Product Type Fractional-N frequency synthesizer Fractional-N frequency synthesizer
Maximum RF Frequency 6 GHz 6 GHz
Fixed Modulus 25 bit 25 bit
Frequency Resolution Subhertz at 6 GHz Subhertz at 6 GHz
Supply Voltage 3.3 V 3.3 V
Control Interface 3-wire serial interface 3-wire serial interface
Operating Temperature Range -40°C to +85°C -40°C to +85°C

Principaux différenciateurs

  • Exact 16-pin TSSOP board compatibility (vs ADF4157BCPZ)
  • Subhertz resolution at the upper operating limit (vs ADF4157BRUZ-RL)
  • Digital RF synthesis with independent tuning supply (vs ADF4157BCPZ)

Notes de conception

Use the Analog Devices ADF4157 evaluation-board layout as the starting point for reference routing, grounding, and loop-filter placement. Keep the reference and feedback paths away from digital switching nodes and high-current return paths. Connect the charge-pump and tuning-voltage network close to the relevant device pins with short, low-inductance traces, and provide a quiet ground reference for the sensitive analog section.

Plan the 3.3 V supply and separate VP connection according to the manufacturer datasheet, including the required decoupling network and voltage range for the external tuning network. Keep switching-regulator and digital-supply routing away from the VP and charge-pump nodes. Verify the final supply levels at the pins under maximum programming settings because VP headroom affects the available tuning-voltage range.

Do not treat the 16-pin TSSOP ADF4157BRUZ device as interchangeable with the 20-pin LFCSP ADF4157BCPZ. Also avoid reusing one loop-filter design across unrelated reference frequencies without checking settling time, phase noise, and charge-pump requirements. Confirm the complete ordering suffix and use the manufacturer register and pin tables when creating PCB artwork or replacement documentation.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The available manufacturer product and distributor information does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for this ordering code.

Données vérifiées le : 2026-11-20 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

ADF4157BRUZ-RL7 datasheet ADF4157BRUZ-RL7 specifications ADF4157BRUZ-RL7 pinout ADF4157BRUZ-RL7 datasheet pdf ADF4157BRUZ-RL7 equivalent ADF4157BRUZ-RL7 replacement ADF4157BRUZ-RL7 footprint ADF4157BRUZ-RL7 cross reference ADF4157BRUZ-RL7 vs ADF4157BCPZ ADF4157BRUZ-RL7 6 GHz fractional N ADF4157BRUZ-RL7 application circuit Analog Devices ADF4157BRUZ-RL7 ADF4157BRUZ-RL7 price ADF4157BRUZ-RL7 stock

Composants & termes associés

Analog Devices ADF4157BRUZ-RL7 ADF4157BRUZ-RL ADF4157BCPZ fractional-N frequency synthesizer phase-locked loop PLL frequency synthesizer clock and timing IC sigma-delta fractional interpolator phase-frequency detector precision charge pump programmable reference divider 25-bit fixed modulus subhertz frequency resolution 6 GHz RF frequency 3-wire serial interface digital lock detect separate VP supply extended tuning voltage 16-pin TSSOP TSSOP package family surface-mount package RF local oscillator wireless communication
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ