Analog Devices

ADF4360-1BCP - 2250 MHz Integer-N VCO Synthesizer | Analog Devices

MPN: ADF4360-1BCP ✓ Aktif
3.6 V Vdss 24-lead LFCSP with exposed pad Package 2250 MHz Speed
MOQ: 1 |

ADF4360-1BCP Ringkasan

Analog Devices ADF4360-1BCP is an integrated integer-N frequency synthesizer with a voltage-controlled oscillator, designed around a 2250 MHz center frequency and supplied in a 24-lead LFCSP exposed-pad package. It provides a 1025 MHz to 1225 MHz RF output when the divide-by-2 function is selected, operates from a 3.6 V power supply, and supports 1.8 V-compatible logic.

An integer-N frequency synthesizer is a phase-locked-loop device that locks a voltage-controlled oscillator to a stable reference frequency. It combines a frequency synthesizer, VCO, programmable integer divider, and reference-control functions into one RF component. Within the broader hierarchy, the ADF4360-1BCP is a PLL and frequency synthesizer, then a clock-and-timing IC, and finally a semiconductor for RF signal generation and frequency control.

Key features include fully integrated integer-N operation, programmable output power, a three-wire serial programming interface, digital lock detection, and hardware and software power-down modes. The 3.6 V supply and 1.8 V logic compatibility simplify connections to low-voltage control systems. The divide-by-2 option is valuable when a lower RF frequency is required without adding a separate output divider.

The device uses a closed-loop architecture to control its VCO through a reference clock and integer divider. Designers program the operating configuration through the serial interface, while lock detect provides a digital status indication that can be monitored by a host controller or used in system-level fault handling. Power-down modes reduce activity where the RF output is not required.

Typical uses include local oscillator generation for wireless receivers and transmitters, frequency conversion in RF communication equipment, test and measurement instruments, and clock or carrier generation for industrial and consumer systems. Its 2250 MHz VCO center frequency and divide-by-2 output make it particularly relevant to 2.4 GHz RF signal-chain designs.

Layout is critical because the VCO must remain stable while the synthesizer changes frequency. Follow the manufacturer reference layout, keep the VCO output path compact, place decoupling and loop-filter components close to their designated pins, and provide a continuous ground return through the exposed pad. Confirm lock, output power, spur performance, and supply sequencing during bring-up.

Alternatif penggantian untuk ADF4360-1BCP — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ADF4360-1BCP (sama faktor bentuk dan footprint).

ADF4360-2BCPZ

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 24-LFCSP exposed pad
VCO band changes from the ADF4360-1BCP 2250 MHz center region to approximately 2000 MHz, a 250 MHz or 11.1% increase

📋 Alternatif referensi (tidak dalam katalog)

ADF4360-3BCPZ

✅ Drop-In
📦 24-LFCSP exposed pad
VCO band changes from the ADF4360-1BCP 2250 MHz center region to approximately 3000 MHz, a 750 MHz or 33.3% increase

📋 Alternatif referensi (tidak dalam katalog)

ADF4360-4BCPZ

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 24-LFCSP exposed pad
VCO band changes from the ADF4360-1BCP 2250 MHz center region to approximately 4000 MHz, a 1750 MHz or 77.8% increase

📋 Alternatif referensi (tidak dalam katalog)

ADF4360-7BCPZ

✅ Drop-In
Analog Devices
📦 24-LFCSP exposed pad
Integer-N frequency synthesizer with integrated VCO · Analog Devices · 350 MHz to 1800 MHz · 175 MHz to 900 MHz · 1800 MHz · 3.0 V to 3.6 V · 3.6 V · 1.8 V

Kontak untuk harga

Lihat Datasheet →

ADF4360-8BCPZ

✅ Drop-In
📦 24-LFCSP exposed pad
VCO band changes from the ADF4360-1BCP 2250 MHz center region to approximately 8000 MHz, a 5750 MHz or 255.6% increase

📋 Alternatif referensi (tidak dalam katalog)

ADF4360-1BCP Spesifikasi

VCO Center Frequency 2250 MHz
Divide-by-2 RF Output Range 1025 MHz to 1225 MHz
Maximum RF Output Frequency 2450 MHz
Reference Input Frequency Range 10 MHz to 250 MHz
Power Supply Voltage 3.6 V
Logic Compatibility 1.8 V
Synthesizer Architecture Integer-N
Output Divider Divide-by-2
Programmable Output Power Programmable
Programming Interface 3-wire serial interface
Lock Detection Digital
Power-Down Modes Hardware and software
Integrated Functions Integer-N synthesizer and voltage-controlled oscillator
Jumlah Pin 24 pins
Paket 24-lead LFCSP with exposed pad
Tipe Mounting Surface mount

ADF4360-1BCP 24-lead lfcsp with exposed pad Diamant Konfigurasi Panduan

Konfigurasi pin untuk ADF4360-1BCP (24-lead lfcsp with exposed pad pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 24-lead lfcsp with exposed pad untuk ADF4360-1BCP

Tidak ada data diatribut pin yang tersedia untuk ADF4360-1BCP.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ADF4360-1BCP cocok untuk 6 aplikasis: 2.4 GHz Wireless Transceiver, RF Receiver Local Oscillator, Frequency Conversion Subsystem, RF Test and Measurement Equipment, Industrial RF Control System, Wireless Sensor Gateway.

🌐

2.4 GHz Wireless Transceiver

The ADF4360-1BCP is suited to local-oscillator generation in 2.4 GHz wireless transmitters and receivers because Analog Devices identifies a 2250 MHz VCO center frequency and a maximum RF output frequency of 2450 MHz. Its integrated integer-N synthesizer allows the output frequency to be programmed through the three-wire serial interface. The programmable output power also provides an adjustment range for downstream RF stages. Designers should keep the VCO route short, follow the exposed-pad grounding pattern, and validate phase noise and spurious performance for the selected channel bandwidth.

📡

RF Receiver Local Oscillator

A receiver can use the ADF4360-1BCP to generate the local oscillator required for downconversion. The 2250 MHz VCO center frequency aligns with RF designs around the 2.4 GHz region, while the divide-by-2 option provides a 1025 MHz to 1225 MHz output. Because the synthesizer and VCO are integrated, the board avoids a separate VCO and divider assembly. The receiving chain should be evaluated for phase-noise impact, lock time, reference spur levels, and unwanted coupling from digital control signals.

⚡

Frequency Conversion Subsystem

The ADF4360-1BCP can serve as the tunable oscillator in a frequency-conversion subsystem where an integer-N PLL drives a mixer or switching element. Its 2450 MHz maximum RF output supports designs near the upper portion of the 2.4 GHz band, and its programmable output power helps accommodate different downstream drive requirements. Integration reduces board area and assembly complexity. Performance validation should include supply rejection, VCO tuning linearity, lock-detect behavior, and isolation from high-level switching nodes.

🖥️

RF Test and Measurement Equipment

Programmable test equipment can use the ADF4360-1BCP as a compact signal source for exercising receiver and transmitter paths. The serial programming interface supports automated frequency setup, while digital lock detection can be monitored by the test controller. Its 3.6 V supply and 1.8 V-compatible logic simplify integration with embedded test-control electronics. For accurate measurements, use a low-phase-noise reference, implement the manufacturer-recommended loop filter, and calibrate output power and frequency across the required operating range.

🏭

Industrial RF Control System

Industrial RF control systems can employ the ADF4360-1BCP when a compact, digitally controlled oscillator is needed for sensing, communications, or microwave-processing equipment. Programmable output power and hardware or software power-down modes support systems that must balance RF performance with energy use. The 24-lead exposed-pad package supports dense assemblies when the PCB provides adequate thermal relief. Designers should separate the sensitive VCO region from motors, relays, and switching power converters, then verify conducted and radiated emissions.

🧩

Wireless Sensor Gateway

A wireless sensor gateway can use the ADF4360-1BCP for RF modulation, clock generation, or local-oscillator functions within a compact 2.4 GHz system. The integrated integer-N architecture reduces the number of external frequency-generation components, while digital lock detect and power-down control fit managed embedded firmware. Low-power operation should be implemented with the documented power-down modes rather than by removing the reference signal during operation. Printed-circuit design should preserve the recommended ground via pattern and minimize VCO trace coupling.

Ringkasan Produk Direkomendasikan

ADF4360-1BCPZ Analog Devices Digunakan di dalam: 2.4 GHz Wireless Transceiver, RF Receiver Local Oscillator ADF4360-3BCPZ Same-package higher-band family option for comparison in wider conversion plans Digunakan di dalam: Frequency Conversion Subsystem ADF4360-2BCPZ Same-package family option for instruments extending into a different VCO band Digunakan di dalam: RF Test and Measurement Equipment ADF4360-4BCPZ Same-package family member for higher-band industrial RF designs Digunakan di dalam: Industrial RF Control System ADF4360-7BCPZ Analog Devices Digunakan di dalam: Wireless Sensor Gateway
What is the ADF4360-1BCP?
The ADF4360-1BCP is a fully integrated integer-N frequency synthesizer and voltage-controlled oscillator from Analog Devices. According to the manufacturer product page, its VCO is designed for a 2250 MHz center frequency, and the device also provides a divide-by-2 RF output. It combines frequency synthesis, VCO control, programmable output power, digital lock indication, and a three-wire serial programming interface in a 24-lead LFCSP exposed-pad package.
What are the key specifications of ADF4360-1BCP that engineers should know?
The principal ADF4360-1BCP specifications are a 2250 MHz VCO center frequency, a 1025 MHz to 1225 MHz divide-by-2 RF output range, and operation from a 3.6 V supply with 1.8 V logic compatibility. The Analog Devices product page identifies it as an integer-N synthesizer with programmable output power. The part also includes digital lock detect plus hardware and software power-down modes, making it suitable for programmable RF and communication equipment.
Where can I download the ADF4360-1BCP datasheet PDF?
The official ADF4360-1 datasheet and product information are available from the Analog Devices product page at https://www.analog.com/en/products/adf4360-1.html. Use the manufacturer datasheet for the complete pin description, register map, recommended application circuit, electrical characteristics, and layout instructions. The manufacturer page should be the primary document for design verification because it is maintained by the device manufacturer and covers the complete ADF4360-1 family.
Where can I find the ADF4360-1BCP pinout?
The ADF4360-1BCP pinout is defined in the pin-description table and package drawing in the Analog Devices manufacturer datasheet. The device is identified as a 24-lead LFCSP with an exposed pad, so the exposed thermal and electrical pad must be connected according to the recommended land pattern. Assign PCB nets from the complete datasheet pin table rather than relying on package-outline graphics alone, because the exposed pad also serves a thermal function.
What output frequency does the ADF4360-1BCP produce in divide-by-2 mode?
In divide-by-2 mode, the ADF4360-1BCP produces an RF output from 1025 MHz to 1225 MHz. This range corresponds to half of the family's 2250 MHz VCO center-frequency region identified by Analog Devices. The divide-by-2 option is useful for generating a lower-frequency local oscillator or carrier while retaining the integrated VCO and integer-N synthesizer functions.
What supply voltage and logic level does the ADF4360-1BCP use?
The ADF4360-1BCP uses a 3.6 V power supply and supports 1.8 V-compatible logic. According to the ADF4360-1 product information, this combination supports designs that use low-voltage control signals without requiring a separate level translator for the programming interface. Confirm each supply and digital-input limit in the manufacturer electrical-characteristics table before setting interface thresholds or planning power-sequencing behavior.
Can ADF4360-1BCP replace ADF4360-1BCPZ?
ADF4360-1BCP and ADF4360-1BCPZ belong to the same ADF4360-1 family and are associated with the same 24-lead exposed-pad package, but a board-level substitution should still be checked for temperature grade, packing, lifecycle, and ordering-code differences. The suffixes can encode commercial and mechanical options rather than identical purchasing conditions. Compare the complete ordering table and current manufacturer product status before treating either ordering code as an interchangeable production alternative.
What is the best drop-in replacement for ADF4360-1BCP?
The closest same-family drop-in candidates are ADF4360-2BCPZ, ADF4360-3BCPZ, ADF4360-4BCPZ, ADF4360-7BCPZ, and ADF4360-8BCPZ because they use the same 24-lead exposed-pad family package and pin-oriented architecture. Their VCO bands differ from the ADF4360-1BCP, so confirm the required tuning range, reference ratio, divider settings, phase-noise profile, and register compatibility. A footprint match alone does not guarantee frequency-plan compatibility.
What can replace ADF4360-1BCP?
ADF4360-1BCP can be replaced by another member of the ADF4360 family only when the required output band, reference frequency, divider arrangement, register programming, and electrical limits remain acceptable. ADF4360-2BCPZ through ADF4360-8BCPZ offer the closest package-level options. Treat these as design-review candidates rather than automatic substitutions because each frequency-band member has a different VCO range and potentially different loop-filter or tuning requirements.
Is ADF4360-1BCP the same as ADF4360-3BCPZ?
No. The ADF4360-1BCP is centered on a 2250 MHz VCO range, while the ADF4360-3BCPZ belongs to a different ADF4360 frequency-band variant. They share the 24-lead exposed-pad package family, but their tuning ranges and synthesis behavior are not identical. A replacement is acceptable only if the ADF4360-3BCPZ can cover the complete required output range and the associated programming and loop-filter settings have been validated.
When should I choose ADF4360-1BCP over ADF4360-3BCPZ?
Choose the ADF4360-1BCP when the design targets the 2.4 GHz RF region, including the manufacturer-described 1025 MHz to 1225 MHz divide-by-2 range, and its 2250 MHz VCO center frequency aligns with the frequency plan. Choose the ADF4360-3BCPZ only when a higher-band VCO is required and the output, reference, and loop settings have been recalculated. Package compatibility does not make the two frequency plans equivalent.
Is ADF4360-1BCP suitable for wireless communication equipment?
The ADF4360-1BCP is suitable for programmable RF signal generation where a local oscillator near the 2.4 GHz region is needed. Its integer-N architecture, programmable output power, 1.8 V-compatible logic, digital lock detect, and integrated VCO reduce the number of external RF functions. The manufacturer identifies a 2250 MHz center frequency and a maximum RF output frequency of 2450 MHz, making the device relevant to wireless transmitters and receivers operating in that band.
How should the ADF4360-1BCP be placed on a PCB?
Follow the manufacturer reference layout and keep the VCO output path, power connections, decoupling capacitors, and external loop-filter components compact and positioned as specified. The 24-lead LFCSP exposed pad requires a properly designed thermal and electrical land pattern, normally with multiple PCB vias connecting it to ground. Review routing for isolation from noisy digital and switching circuitry to reduce coupling into the VCO and its phase-locked loop.
Where can I buy ADF4360-1BCP and request a quote?
Use the Request a Quote form on this page to ask for ADF4360-1BCP availability, quantity breaks, current lead time, and order handling. The form is the appropriate channel for a firm quotation because market conditions and component allocation can change. Provide the exact ADF4360-1BCP ordering code, target quantity, and required packaging details so the request can be matched without ambiguity.
What is the price and lead time for ADF4360-1BCP?
Current price and lead time for the ADF4360-1BCP should be requested through the Request a Quote form on this page. Submit the required quantity and packaging preference to obtain a current quotation and production lead time. The form avoids presenting a potentially stale market figure and lets the order be reviewed against the exact manufacturer ordering code rather than a related package variant.
Is ADF4360-1BCP currently active?
The Analog Devices manufacturer product page remains available for the ADF4360-1 family, and the product is treated as active for this listing as of 2026-11-10. Confirm current lifecycle status and orderable suffixes before committing a production design. The family includes multiple package, temperature, and tape-and-reel ordering codes, so the exact suffix must also be checked during procurement review.

Data referensi engineering untuk ADF4360-1BCP — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the ADF4360-1BCP when the design needs an integrated integer-N VCO around the 2.4 GHz RF region, particularly when a 2250 MHz center frequency and a 1025 MHz to 1225 MHz divide-by-2 output are useful. Its 3.6 V supply, 1.8 V-compatible logic, programmable output power, digital lock detect, and power-down functions suit compact programmable RF systems. The ADF4360-2BCPZ is the closer lower-band alternative, while the ADF4360-3BCPZ, ADF4360-4BCPZ, ADF4360-7BCPZ, and ADF4360-8BCPZ target progressively higher VCO bands. Although these alternatives share the 24-lead exposed-pad package, a footprint match does not guarantee electrical substitution. Select an alternative only when its tuning range covers the required output with margin and its divider, register, reference, loop-filter, phase-noise, and power requirements have been revalidated.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ADF4360-2BCPZ ADF4360-3BCPZ ADF4360-4BCPZ ADF4360-7BCPZ ADF4360-8BCPZ
Package 24-LFCSP exposed pad 24-LFCSP exposed pad 24-LFCSP exposed pad 24-LFCSP exposed pad 24-LFCSP exposed pad 24-LFCSP exposed pad
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
VCO Center Frequency 2250 MHz Approximately 2000 MHz Approximately 3000 MHz Approximately 4000 MHz Approximately 7000 MHz Approximately 8000 MHz

Diferensiator Kunci

  • Direct alignment with the 2.4 GHz RF region (vsADF4360-3BCPZ)
  • Divide-by-2 output covers a separate lower-frequency range (vsADF4360-8BCPZ)
  • Compact integrated VCO and integer-N control (vsADF4360-2BCPZ)

Catatan Desain

Follow the manufacturer reference layout and keep the VCO output route short. Place input, output, and loop-filter decoupling components at the pins designated by the application schematic. Maintain the specified ground-via pattern beneath the 24-lead LFCSP exposed pad and provide an uninterrupted ground reference around the VCO section. Changes to trace length or return-current paths can affect tuning stability and phase noise.

Use a clean 3.6 V supply and decouple it according to the manufacturer application circuit. Because the ADF4360-1 includes a sensitive VCO, supply ripple can appear as phase noise or reference spurs. Keep switching-regulator and digital-supply return currents away from the VCO ground path, and verify power-supply rejection during system-level testing. The 1.8 V-compatible interface reduces control-signal amplitude but does not remove the need for careful supply filtering.

Do not select an ADF4360 family member solely from its package. The ADF4360-2BCPZ through ADF4360-8BCPZ use the same family package but cover different VCO bands, so the selected output must remain inside the required tuning range. Recheck the integer-N divider values, reference ratio, loop filter, lock behavior, output power settings, and register map after any substitution. Confirm the exact ordering suffix and temperature grade before production release.

Treat the reference and RF paths as sensitive signals. Use short, impedance-controlled connections, avoid routing them beneath or parallel to high-energy switching nodes, and keep the programming bus away from the VCO output path. Monitor the digital lock-detect signal during startup and frequency changes. Validate spurious emissions, lock time, and phase noise with the final reference clock and PCB stack-up because enclosure and power-supply details can alter measured performance.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes were not identified in the cited product information and must be confirmed against the current Analog Devices product documentation before procurement.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

adf4360 1bcp adf4360 1bcpz adf4360 7bcpz adf4360 7bcpzrl7 ADF4360-1BCP datasheet ADF4360-1BCP datasheet pdf ADF4360-1BCP pinout ADF4360-1BCP equivalent ADF4360-1BCP replacement ADF4360-1BCP vs ADF4360-3BCPZ ADF4360-1BCP footprint ADF4360-1BCP application circuit ADF4360-1BCP price ADF4360-1BCP stock

Komponen dan Istilah Terkait

Analog Devices ADF4360-1BCP ADF4360-1BCPZ ADF4360-2BCPZ ADF4360-3BCPZ ADF4360-4BCPZ ADF4360-7BCPZ ADF4360-8BCPZ integer-N frequency synthesizer phase-locked loop PLL voltage-controlled oscillator VCO clock and timing IC RF synthesizer 24-LFCSP LFCSP exposed-pad package QFN package family surface-mount package programmable output power digital lock detect three-wire serial interface divide-by-2 output 2.4 GHz RF reference spur
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ