ADS1216Y/2K - 24-Bit, 8-Channel Delta-Sigma ADC | TI
MPN: ADS1216Y/2K ✓ AktifADS1216Y/2K Ringkasan
A delta-sigma ADC is a high-resolution data-converter category that uses continuous-time oversampling, digital filtering, and noise shaping to extract precise measurements from noisy or low-level analog signals. Within the broader hierarchy, it is an analog-to-digital converter, data-converter IC, and mixed-signal semiconductor designed for instrumentation and industrial measurement systems.
The ADS1216 multiplexes eight analog input channels and includes selectable internal input buffering for high input impedance. Integrated burnout current sources help identify open or shorted sensors, while the programmable gain amplifier supports low-level signal conditioning. An 8-bit DAC provides offset correction over a range equal to 50% of full scale, and the device also includes a reference input, programmable gain, digital I/O, and RAM for measurement configuration.
Its SPI-compatible interface connects the converter to a host controller, while eight digital I/O pins can operate as inputs or outputs. These features allow a single device to handle sensor multiplexing, gain selection, offset correction, diagnostics, and digital control functions. The 780 samples-per-second conversion rate is suited to precision control and measurement systems that prioritize resolution and noise performance over high-rate waveform acquisition.
Typical uses include smart transmitters, industrial process control, weight scales, chromatography, portable instrumentation, pressure measurement, bridge-sensor signal acquisition, laboratory data acquisition, and embedded sensor interfaces. The buffered inputs are particularly useful when transducers have high source impedance or when the measurement front end requires limited loading.
PCB design should keep analog inputs, voltage reference connections, and ground returns short and isolated from digital switching paths. Follow the manufacturer datasheet for the recommended bypass-capacitor network, reference implementation, exposed-pad layout, and analog-ground connection. Configure the gain, data rate, digital filter, and channel sequence for the required resolution, settling time, and rejection of line-frequency interference.
This page combines the converter's principal operating characteristics, application guidance, replacement considerations, and practical implementation notes into a design-focused reference for engineers evaluating high-resolution multiplexed measurement.
Alternatif penggantian untuk ADS1216Y/2K — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifADS1216Y/2K Rating Maksimal & Karakteristik Listrik
| ADC Resolution | 24 bit |
| Analog Input Channels | 8 channels |
| Conversion Type | Delta-sigma |
| Maximum Conversion Rate | 780 samples/s |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Serial Interface | SPI-compatible |
| Digital I/O | 8 bits |
| Internal DAC Resolution | 8 bit |
| DAC Offset-Correction Range | 50% of full-scale range |
| Input Multiplexing | 8 analog inputs |
| Programmable Gain Amplifier | 1 to 128 gain |
| Voltage Reference | External VREF |
| Input Buffering | Selectable internal buffering |
| Burnout Current Sources | Open- and short-circuit sensor detection |
| On-Chip Memory | RAM |
| Paket | 48-pin TQFP, 7 mm × 7 mm |
| Tipe Mounting | Surface mount |
| Temperature Grade | Industrial |
| Terminal Count | 48 terminals |
| Package Shape | Square |
ADS1216Y/2K square Diamant Konfigurasi Panduan
Konfigurasi pin untuk ADS1216Y/2K (square pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk ADS1216Y/2K.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ADS1216Y/2K cocok untuk 6 aplikasis: Industrial Process Control, Smart Transmitter Signal Conditioning, Weight Scale and Load Cell, Pressure Sensor Instrumentation, Chromatography Data Acquisition, Portable Instrumentation.
Industrial Process Control
The ADS1216Y/2K fits industrial process-control front ends that must measure several low-level process signals with one precision converter. Its eight multiplexed 24-bit channels, programmable gain amplifier, and conversion rates up to 780 samples per second provide adequate resolution for pressure, temperature, and position feedback while supporting digital-filter selection for line-frequency rejection. The 2.7 V to 5.25 V operating range also fits common embedded control architectures. Place the analog section near the sensor connectors and keep switching regulators and digital clocks away from the input and reference nets.
Direkomendasikan
Smart Transmitter Signal Conditioning
The ADS1216Y/2K is well suited to smart transmitters that combine several sensor inputs with local diagnostics and digital correction. Its eight selectable channels, programmable gain amplifier, and selectable internal buffering support bridge, voltage, and other low-level transducer interfaces without imposing excessive load on high-impedance sources. Burnout current sources help identify disconnected or shorted sensors, while the 8-bit DAC provides offset correction across 50% of the full-scale range. The SPI-compatible interface and eight configurable digital I/O lines allow the transmitter controller to configure the converter and supervise auxiliary signals.
Direkomendasikan
Weight Scale and Load Cell
The ADS1216Y/2K can serve as the central measurement converter in a precision weight-scale or load-cell design. Its 24-bit delta-sigma architecture is appropriate for slow-to-medium-rate force measurements, while selectable buffering reduces loading on the bridge output. The programmable gain amplifier accommodates low-level sensor signals, and the internal offset-correction DAC can help compensate system offsets. Use shielded sensor wiring, a quiet reference, and careful analog-ground routing to prevent switching noise from appearing as unstable load-cell readings.
Direkomendasikan
Pressure Sensor Instrumentation
The ADS1216Y/2K fits pressure transmitters and test instruments that need accurate, low-level analog measurement plus sensor-health detection. The eight multiplexed channels allow pressure, temperature, and reference or calibration signals to share a high-resolution converter. Selectable internal buffering supports piezoelectric or resistive sensor interfaces requiring high input impedance, and burnout current sources can reveal open or shorted probes. The 780 samples-per-second maximum rate is more than adequate for many slow pressure loops, while register-controlled data rates provide additional rejection when the application requires it.
Direkomendasikan
Chromatography Data Acquisition
The ADS1216Y/2K can support chromatography acquisition systems where detector outputs are low level and require high resolution rather than very high sample rates. Its eight multiplexed inputs can consolidate multiple detector or auxiliary channels, and the 24-bit conversion resolution helps preserve small signal variation. Selectable input buffering reduces detector loading, while the programmable gain amplifier adapts to differing signal amplitudes. Configure the digital filter to reject line-frequency interference and ensure the system settling time accommodates complete channel conversion before acquisition software begins a new sample.
Direkomendasikan
Portable Instrumentation
The ADS1216Y/2K supports portable instrumentation because it combines eight precision channels, programmable gain, sensor diagnostics, and digital offset correction in a 48-pin TQFP. The 2.7 V minimum supply supports low-voltage portable systems, and the delta-sigma architecture provides high resolution without requiring a high-rate flash ADC. Eight digital I/O lines can assist with control or status functions, while the SPI-compatible serial interface connects efficiently to a low-power controller. Battery-powered designs should use the lowest acceptable data rate and disable unused channels to control both conversion energy and measurement latency.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADS1216Y/2K — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Package | 48-pin TQFP, 7 mm × 7 mm |
| Brand | Texas Instruments |
| ADC Resolution | 24 bit |
| Analog Input Channels | 8 multiplexed channels |
| Conversion Architecture | Delta-sigma |
| Maximum Conversion Rate | 780 samples/s |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Serial Interface | SPI-compatible |
| Digital I/O | 8 configurable I/O bits |
| Offset-Correction DAC | 8-bit DAC with 50% of FSR correction range |
Diferensiator Kunci
- Eight-channel multiplexing in a single precision converter (vsAD7306JRZ)
- Integrated sensor diagnostics and offset correction (vsADS1131IDR)
- Dedicated digital control and communication resources (vsAD7492BRZ)
Catatan Desain
Route the eight analog inputs, voltage reference, and analog ground as a compact, quiet group. Keep digital SPI traces, clock signals, and switching-supply paths away from sensitive input and reference nodes. The ADS1216Y/2K combines a precision converter with multiplexed low-level inputs, so long parallel digital traces beneath the analog section can increase coupling. Use the manufacturer datasheet's recommended ground and bypass-capacitor arrangement, including the exposed thermal pad, to establish a low-impedance return path.
Configure the programmable gain, data rate, digital filter, and channel sequence as one acquisition plan rather than setting each parameter independently. Lower data rates increase averaging and line-frequency rejection but also increase acquisition latency. Check full-scale range and common-mode limits for every sensor connected to the eight multiplexed inputs. Enabling the internal buffer is appropriate for high-impedance transducers, but the selected gain must remain compatible with the input voltage range at every programmed gain step.
Follow the Texas Instruments ADS1216 datasheet for supply and reference bypass capacitors, including capacitor type and placement. Place each decoupling capacitor directly beside its associated supply pin and keep the reference network away from digital return currents. The converter operates from 2.7 V to 5.25 V, but the external reference and sensor bias circuitry can impose additional voltage constraints. Verify startup sequencing, reference settling, and regulator noise at the ADC pins because an apparently correct supply value does not guarantee accurate low-level measurements.
Informasi Konformitas
The ADS1216 is an industrial-grade analog-to-digital converter, but no RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations are identified in the manufacturer and product-page extracts. No AEC-Q100 qualification is indicated.