ADS1216Y/2K - 24-Bit, 8-Channel Delta-Sigma ADC | TI
MPN: ADS1216Y/2K ✓ פעילADS1216Y/2K סקירה
A delta-sigma ADC is a high-resolution data-converter category that uses continuous-time oversampling, digital filtering, and noise shaping to extract precise measurements from noisy or low-level analog signals. Within the broader hierarchy, it is an analog-to-digital converter, data-converter IC, and mixed-signal semiconductor designed for instrumentation and industrial measurement systems.
The ADS1216 multiplexes eight analog input channels and includes selectable internal input buffering for high input impedance. Integrated burnout current sources help identify open or shorted sensors, while the programmable gain amplifier supports low-level signal conditioning. An 8-bit DAC provides offset correction over a range equal to 50% of full scale, and the device also includes a reference input, programmable gain, digital I/O, and RAM for measurement configuration.
Its SPI-compatible interface connects the converter to a host controller, while eight digital I/O pins can operate as inputs or outputs. These features allow a single device to handle sensor multiplexing, gain selection, offset correction, diagnostics, and digital control functions. The 780 samples-per-second conversion rate is suited to precision control and measurement systems that prioritize resolution and noise performance over high-rate waveform acquisition.
Typical uses include smart transmitters, industrial process control, weight scales, chromatography, portable instrumentation, pressure measurement, bridge-sensor signal acquisition, laboratory data acquisition, and embedded sensor interfaces. The buffered inputs are particularly useful when transducers have high source impedance or when the measurement front end requires limited loading.
PCB design should keep analog inputs, voltage reference connections, and ground returns short and isolated from digital switching paths. Follow the manufacturer datasheet for the recommended bypass-capacitor network, reference implementation, exposed-pad layout, and analog-ground connection. Configure the gain, data rate, digital filter, and channel sequence for the required resolution, settling time, and rejection of line-frequency interference.
This page combines the converter's principal operating characteristics, application guidance, replacement considerations, and practical implementation notes into a design-focused reference for engineers evaluating high-resolution multiplexed measurement.
חלופות תחליף ישיר עבור ADS1216Y/2K — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותADS1216Y/2K דירוגים מרביים ומאפיינים חשמליים
| ADC Resolution | 24 bit |
| Analog Input Channels | 8 channels |
| Conversion Type | Delta-sigma |
| Maximum Conversion Rate | 780 samples/s |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Serial Interface | SPI-compatible |
| Digital I/O | 8 bits |
| Internal DAC Resolution | 8 bit |
| DAC Offset-Correction Range | 50% of full-scale range |
| Input Multiplexing | 8 analog inputs |
| Programmable Gain Amplifier | 1 to 128 gain |
| Voltage Reference | External VREF |
| Input Buffering | Selectable internal buffering |
| Burnout Current Sources | Open- and short-circuit sensor detection |
| On-Chip Memory | RAM |
| מארז | 48-pin TQFP, 7 mm × 7 mm |
| סוג הרכבה | Surface mount |
| Temperature Grade | Industrial |
| Terminal Count | 48 terminals |
| Package Shape | Square |
מדריך תצורת פינים של ADS1216Y/2K square
תצורת פינים עבור ADS1216Y/2K (מארזת square). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור ADS1216Y/2K.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADS1216Y/2K מתאים עבור 6 יישוםs: Industrial Process Control, Smart Transmitter Signal Conditioning, Weight Scale and Load Cell, Pressure Sensor Instrumentation, Chromatography Data Acquisition, Portable Instrumentation.
Industrial Process Control
The ADS1216Y/2K fits industrial process-control front ends that must measure several low-level process signals with one precision converter. Its eight multiplexed 24-bit channels, programmable gain amplifier, and conversion rates up to 780 samples per second provide adequate resolution for pressure, temperature, and position feedback while supporting digital-filter selection for line-frequency rejection. The 2.7 V to 5.25 V operating range also fits common embedded control architectures. Place the analog section near the sensor connectors and keep switching regulators and digital clocks away from the input and reference nets.
מומלץ
Smart Transmitter Signal Conditioning
The ADS1216Y/2K is well suited to smart transmitters that combine several sensor inputs with local diagnostics and digital correction. Its eight selectable channels, programmable gain amplifier, and selectable internal buffering support bridge, voltage, and other low-level transducer interfaces without imposing excessive load on high-impedance sources. Burnout current sources help identify disconnected or shorted sensors, while the 8-bit DAC provides offset correction across 50% of the full-scale range. The SPI-compatible interface and eight configurable digital I/O lines allow the transmitter controller to configure the converter and supervise auxiliary signals.
מומלץ
Weight Scale and Load Cell
The ADS1216Y/2K can serve as the central measurement converter in a precision weight-scale or load-cell design. Its 24-bit delta-sigma architecture is appropriate for slow-to-medium-rate force measurements, while selectable buffering reduces loading on the bridge output. The programmable gain amplifier accommodates low-level sensor signals, and the internal offset-correction DAC can help compensate system offsets. Use shielded sensor wiring, a quiet reference, and careful analog-ground routing to prevent switching noise from appearing as unstable load-cell readings.
מומלץ
Pressure Sensor Instrumentation
The ADS1216Y/2K fits pressure transmitters and test instruments that need accurate, low-level analog measurement plus sensor-health detection. The eight multiplexed channels allow pressure, temperature, and reference or calibration signals to share a high-resolution converter. Selectable internal buffering supports piezoelectric or resistive sensor interfaces requiring high input impedance, and burnout current sources can reveal open or shorted probes. The 780 samples-per-second maximum rate is more than adequate for many slow pressure loops, while register-controlled data rates provide additional rejection when the application requires it.
מומלץ
Chromatography Data Acquisition
The ADS1216Y/2K can support chromatography acquisition systems where detector outputs are low level and require high resolution rather than very high sample rates. Its eight multiplexed inputs can consolidate multiple detector or auxiliary channels, and the 24-bit conversion resolution helps preserve small signal variation. Selectable input buffering reduces detector loading, while the programmable gain amplifier adapts to differing signal amplitudes. Configure the digital filter to reject line-frequency interference and ensure the system settling time accommodates complete channel conversion before acquisition software begins a new sample.
מומלץ
Portable Instrumentation
The ADS1216Y/2K supports portable instrumentation because it combines eight precision channels, programmable gain, sensor diagnostics, and digital offset correction in a 48-pin TQFP. The 2.7 V minimum supply supports low-voltage portable systems, and the delta-sigma architecture provides high resolution without requiring a high-rate flash ADC. Eight digital I/O lines can assist with control or status functions, while the SPI-compatible serial interface connects efficiently to a low-power controller. Battery-powered designs should use the lowest acceptable data rate and disable unused channels to control both conversion energy and measurement latency.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADS1216Y/2K — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Package | 48-pin TQFP, 7 mm × 7 mm |
| Brand | Texas Instruments |
| ADC Resolution | 24 bit |
| Analog Input Channels | 8 multiplexed channels |
| Conversion Architecture | Delta-sigma |
| Maximum Conversion Rate | 780 samples/s |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Serial Interface | SPI-compatible |
| Digital I/O | 8 configurable I/O bits |
| Offset-Correction DAC | 8-bit DAC with 50% of FSR correction range |
מבדילים עיקריים
- Eight-channel multiplexing in a single precision converter (לעומתAD7306JRZ)
- Integrated sensor diagnostics and offset correction (לעומתADS1131IDR)
- Dedicated digital control and communication resources (לעומתAD7492BRZ)
הערות תכנון
Route the eight analog inputs, voltage reference, and analog ground as a compact, quiet group. Keep digital SPI traces, clock signals, and switching-supply paths away from sensitive input and reference nodes. The ADS1216Y/2K combines a precision converter with multiplexed low-level inputs, so long parallel digital traces beneath the analog section can increase coupling. Use the manufacturer datasheet's recommended ground and bypass-capacitor arrangement, including the exposed thermal pad, to establish a low-impedance return path.
Configure the programmable gain, data rate, digital filter, and channel sequence as one acquisition plan rather than setting each parameter independently. Lower data rates increase averaging and line-frequency rejection but also increase acquisition latency. Check full-scale range and common-mode limits for every sensor connected to the eight multiplexed inputs. Enabling the internal buffer is appropriate for high-impedance transducers, but the selected gain must remain compatible with the input voltage range at every programmed gain step.
Follow the Texas Instruments ADS1216 datasheet for supply and reference bypass capacitors, including capacitor type and placement. Place each decoupling capacitor directly beside its associated supply pin and keep the reference network away from digital return currents. The converter operates from 2.7 V to 5.25 V, but the external reference and sensor bias circuitry can impose additional voltage constraints. Verify startup sequencing, reference settling, and regulator noise at the ADC pins because an apparently correct supply value does not guarantee accurate low-level measurements.
מידע על תאימות
The ADS1216 is an industrial-grade analog-to-digital converter, but no RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations are identified in the manufacturer and product-page extracts. No AEC-Q100 qualification is indicated.