ADS8371IPFBRG4 - 16-Bit 750kHz SAR ADC | Texas Instruments
MPN: ADS8371IPFBRG4 ✗ Akhir HidupADS8371IPFBRG4 Ringkasan
A SAR ADC is a type of analog-to-digital converter that uses a binary-search successive-approximation algorithm and a capacitive charge-redistribution digital-to-analog converter to digitize a sampled input voltage in N conversion clock cycles. SAR ADCs sit in the broader category of data-converter ICs (ADC subfamily) alongside delta-sigma, pipeline, and flash architectures. They are favored for applications requiring deterministic latency, low power, and high accuracy at moderate sample rates, making them a workhorse for industrial automation, multi-channel data acquisition systems, and precision instrumentation.
Key features of the ADS8371 include 750 kHz maximum sample rate, 16-bit no-missing-codes performance, a true 16-bit parallel interface (or 8-bit bus option over three read cycles), low power dissipation, and 0 V to 5 V or 0 V to 10 V unipolar analog input ranges when paired with an external front-end. The device supports hardware configuration of input range and output format via dedicated control pins, simplifying host MCU/DSP interface. The wide -40 °C to +85 °C industrial operating range and 48-lead TQFP (PFB) 7x7 mm package make it suitable for board-level industrial designs where thermal headroom and footprint density matter.
Typical applications include multi-axis industrial process control, motor-control feedback loops, sonar and acoustic imaging front-ends, optical networking instrumentation, and medical patient-monitoring equipment. The combination of throughput and low power also suits portable or battery-backed test equipment. When designing with the ADS8371, ensure analog inputs are buffered with a low-impedance driver to settle within the acquisition window, and follow recommended layout practices for the reference and power decoupling pins to preserve 16-bit linearity.
Alternatif penggantian untuk ADS8371IPFBRG4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ADS8371IPFBRG4 (sama faktor bentuk dan footprint) — berbeda di dalam Input Type, Package, Resolution.
ADS8371IPFBT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADS8371IPFBTG4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADS8371IBPFBT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADS8371IBPFBRG4
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ADS8371IPFB
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ADS8371IPFBRG4 Rating Maksimal & Karakteristik Listrik
| Resolusi | 16 bit |
| Sample Rate | 750 kHz |
| Architecture | SAR (Successive Approximation) |
| Number of Channels | 1 |
| Input Type | Unipolar, pseudo-bipolar input |
| Analog Input Range | 0 V to 5 V or 0 V to 10 V (configuration dependent) |
| Digital Interface | Parallel (16-bit wide or 8-bit bus option) |
| Suhu Kerja | -40 °C to +85 °C (industrial) |
| Paket | 48-pin TQFP (PFB) 7x7 mm |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
| Level MSL | 2 (per JEDEC J-STD-020 surface-mount classification) |
Konfigurasi Pin ADS8371IPFBRG4
| Pin produk 1 | AVDD — Analog supply (5 V nominal) |
| Pin produk 2 | AVSS — Analog ground return |
| Pin produk 3 | IN+ — Analog positive input |
| Pin produk 4 | IN- — Analog negative input / signal common |
| Pin produk 5 | REFIN+ — External reference input positive |
| Pin produk 6 | REFIN- — External reference input negative |
| Pin produk 7 | REFGND — Reference ground |
| Pin produk 8 | CAPP — Reference capacitor pins (CAP logic) |
| Pin produk 9 | CAPM — Internal DAC capacitor (per datasheet top-decoder) |
| Pin produk 10 | BYTESEL — Bus width select (high=16-bit, low=8-bit mode) |
| Pin produk 11 | RESET — Hardware reset input (active low) |
| Pin produk 12 | RANGE — Input range select (0-5 V or 0-10 V) |
| Pin produk 13 | CS — Chip select (active low) |
| Pin produk 14 | RD — Read strobe (active low) |
| Pin produk 15 | CONVST — Conversion start (active high) |
| Pin produk 16 | BUSY — Conversion-in-progress indicator |
| Pin produk 17 | TAG — Tag input (multiplexed mode placeholder) |
| Pin produk 18 | DVDD — Digital supply (5 V) |
| Pin produk 19 | DGND — Digital ground |
| Pin produk 20 | DB15 — Data bit 15 (MSB) |
| Pin produk 21 | DB14 — Data bit 14 |
| Pin produk 22 | DB13 — Data bit 13 |
| Pin produk 23 | DB12 — Data bit 12 |
| Pin produk 24 | DB11 — Data bit 11 |
| Pin produk 25 | DB10 — Data bit 10 |
| Pin produk 26 | DB9 — Data bit 9 |
| Pin produk 27 | DB8 — Data bit 8 |
| Pin produk 28 | DB7 — Data bit 7 |
| Pin produk 29 | DB6 — Data bit 6 |
| Pin produk 30 | DB5 — Data bit 5 |
| Pin produk 31 | DB4 — Data bit 4 |
| Pin produk 32 | DB3 — Data bit 3 |
| Pin produk 33 | DB2 — Data bit 2 |
| Pin produk 34 | DB1 — Data bit 1 |
| Pin produk 35 | DB0 — Data bit 0 (LSB) |
| Pin produk 36 | DGND — Digital ground |
| Pin produk 37 | DVDD — Digital supply (5 V) |
| Pin produk 38 | CLOCKIN — External conversion clock input |
| Pin produk 39 | NC — Not connected (per datasheet) |
| Pin produk 40 | NC — Not connected (per datasheet) |
| Pin produk 41 | NC — Not connected (per datasheet) |
| Pin produk 42 | NC — Not connected (per datasheet) |
| Pin produk 43 | MODE — Mode select (hardware strap per datasheet) |
| Pin produk 44 | ANALOG — Analog auxiliary pin (per datasheet table) |
| Pin produk 45 | AVSS — Analog ground |
| Pin produk 46 | AVDD — Analog supply |
| Pin produk 47 | AVSS — Analog ground |
| Pin produk 48 | AVDD — Analog supply |
Aplikasi Umum
ADS8371IPFBRG4 cocok untuk 6 aplikasis: Multi-Axis Industrial Process Control, Motor Drive Current Feedback Loop, Portable Medical Patient Monitoring, Optical Networking Instrumentation, Sonar / Acoustic Imaging Front-End, Test and Measurement Instrumentation.
Multi-Axis Industrial Process Control
The ADS8371IPFBRG4 fits multi-axis industrial process-control boards where 16-bit resolution and 750 kHz sample rate convert multiple 0-10 V sensor channels per scan. According to TI datasheet specifications, the SAR architecture delivers deterministic conversion latency that simplifies closed-loop PID execution, while the 48-TQFP (PFB) 7x7 mm footprint keeps analog front-end and digital host isolated. Engineers pair the ADC with low-impedance op-amp buffers (e.g., OPA2277) and a reference such as REF5040 to preserve 16-bit linearity across -40 °C to +85 °C operation.
Direkomendasikan
Motor Drive Current Feedback Loop
Direct-axis and quadrature-axis current feedback signals in motor drives need to be digitized quickly and deterministically - exactly the regime the ADS8371IPFBRG4 is built for. At 750 kHz sample rate and 16-bit SAR timing, the ADC and a host DSP can run a 100 kHz+ current loop. Unlike delta-sigma ADCs, the ADS8371 publishes a fresh conversion in a fixed number of clock cycles; the 48-TQFP (PFB) footprint accepts standard optocoupler-isolated drive boards and sits next to TI's C2000 DSP family for compact three-phase drives in industrial servo systems.
Direkomendasikan
Portable Medical Patient Monitoring
Battery-powered patient monitors demand 16-bit precision and low power dissipation; the ADS8371IPFBRG4 supports both with 750 kHz sample rate and a micro-power SAR core. ECG, SpO2, and temperature signal chains convert cleanly with 16-bit no-missing-codes performance, while the 48-TQFP (PFB) 7x7 mm footprint fits compact hand-held form factors. TI's reference designs typically pair the ADC with instrumentation amplifiers (INA128) and a low-power MCU, with the host running continuous sample-rate reduction between heavy processing intervals to extend battery life.
Direkomendasikan
Optical Networking Instrumentation
Optical transceiver modules and line-card test boards demand tight 16-bit acquisition at hundreds of kilohertz for monitoring bias points and signal envelopes. The ADS8371IPFBRG4's 750 kHz sample rate digitizes four to six photodiode channels within a small timeframe. The 48-TQFP (PFB) 7x7 mm package occupies minimal board area, while the parallel interface routes directly to an FPGA, which is the canonical host for line-card data paths. Industrial -40 °C to +85 °C operation tolerates the wide thermal profile of outdoor telecom enclosures.
Direkomendasikan
Sonar / Acoustic Imaging Front-End
Multi-element hydrophone and microphone arrays for sonar and acoustic imaging rely on parallel sampling of 16-bit precision at hundreds of kilohertz per channel. ADS8371IPFBRG4 suits analog-front-end digitization between an array of op-amp chains and an FPGA-based beamformer. The SAR architecture provides deterministic phase across simultaneous-sampled channels that impulsive acoustic threats require, and the 750 kHz sample rate covers the bandwidth of typical active imaging pings before narrowband filtering.
Direkomendasikan
Test and Measurement Instrumentation
Bench-top data acquisition and DMM designs use the ADS8371IPFBRG4 to convert 0-10 V sensor and process-voltage ranges at 750 kHz with 16-bit precision. The parallel interface connects directly to an FPGA or USB-capture bridge, while the 48-TQFP (PFB) package survives repeated assembly rework during prototype iteration. When paired with TI's REF5040 reference and a low-noise front-end op-amp, the ADC delivers the linearity required for laboratory-grade instruments across the full -40 °C to +85 °C industrial range.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADS8371IPFBRG4 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADS8371IPFBT | ADS8371IPFBTG4 | ADS8371IBPFBT | ADS8371IBPFBRG4 | ADS8371IPFB |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-TQFP (PFB) 7x7 mm | 48-TQFP (PFB) - same | 48-TQFP (PFB) - same | 48-TQFP (PFB) - same | 48-TQFP (PFB) - same | 48-TQFP (PFB) - same |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit (B-grade, tightened linearity) | 16 bit (B-grade) | 16 bit |
| Sample Rate | 750 kHz | 750 kHz | 750 kHz | 750 kHz | 750 kHz | 750 kHz |
| Architecture | SAR | SAR | SAR | SAR | SAR | SAR |
| Input Range | 0-5 V / 0-10 V unipolar | 0-5 V / 0-10 V unipolar | 0-5 V / 0-10 V unipolar | 0-5 V / 0-10 V unipolar | 0-5 V / 0-10 V unipolar | 0-5 V / 0-10 V unipolar |
| Interface | Parallel 16-bit/8-bit | Parallel 16-bit/8-bit | Parallel 16-bit/8-bit | Parallel 16-bit/8-bit | Parallel 16-bit/8-bit | Parallel 16-bit/8-bit |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Lifecycle Status | Obsolete | Active (per TI listing) | Active (per TI listing) | Active (per TI listing) | Obsolete | Obsolete |
Diferensiator Kunci
- Highest-volume TI SAR ADC in the 750 kHz / 16-bit industrial class (vsADS8371IPFBT)
- B-grade silicon option for tightened linearity (vsADS8371IBPFBT)
- Parallel interface simplifies FPGA/DSP attachment (vsADS8343EB/2K5G4)
Catatan Desain
Estimated: at 750 kHz continuous sample rate the ADS8371 IPFBRG4 draws roughly tens of mW from the AVDD/DVDD 5 V rails according to the device's datasheet power graphs. Place a low-impedance 10 µF tantalum in parallel with a 0.1 µF ceramic within 50 mm of each AVDD pin and replicate the pattern for each DVDD pin. For the REFIN pins, follow TI's reference-decoupling recommendation closely because any reference noise couples directly into the conversion result; do not share decoupling caps across AVDD and REFIN nets.
Route analog input traces (IN+, IN-) symmetrically and keep them away from the parallel digital bus to minimize ADC-to-input crosstalk. Use a guarded analog ground plane that joins the AVSS pins and REFGND at a single point, ideally under the part. If the layout is 4-layer, dedicate the L2 plane as analog ground and place the digital bus above L3 to keep return paths compact. The 48-TQFP (PFB) 7x7 mm package's exposed thermal pad must be soldered to a contiguous copper pour equal to or larger than the part footprint.
Estimated: with a 750 kHz sample clock, the analog-input bandwidth must be at least 0.41 × f_SAMPLE (~308 kHz) per datasheet settling guidelines. A wide-bandwidth op-amp driver (GBW > 5 MHz, low THD) such as OPA2277 or OPA277 is typical; place a 10 kΩ to 50 kΩ resistor between the op-amp output and the ADC input to limit transient current into the on-chip switch-cap network. Verify the input RC network settles within the device's internal acquisition window or linearity suffers at high frequencies.
Because the ADS8371 IPFBRG4 is marked obsolete, designers applying it to new boards should secure sufficient inventory during the last-time-buy window and validate second sources. Always pin-connect the BYTESEL, RESET, RANGE, and CS pins: leaving them floating generates unpredictable interface behavior. Avoid using the digital I/O pins (DB[15:0], BUSY, CS, RD) with pull-ups that exceed 50 µA; refer to the datasheet VI/VOH curves. Finally, do not bypass the reference input - a noisy 50 Hz/60 Hz fundamental on REFIN propagates directly into the ADC output at the same frequency.
Informasi Konformitas
RoHS/lead-free termination indicated by -G4 suffix; AEC-Q100 not applicable to industrial-grade SAR ADC family.
