ADS8482IRGZR - 18-bit 1MSPS SAR ADC w/Internal Ref | TI
MPN: ADS8482IRGZR ✓ AktifADS8482IRGZR Ringkasan
An SAR (Successive Approximation Register) ADC is a precision data-converter architecture that uses an internal binary-search algorithm against a precision DAC to resolve a single input sample per conversion cycle. SAR ADCs occupy the middle ground between slow, ultra-precise delta-sigma ADCs and fast but lower-resolution flash ADCs, and are widely used in industrial process control, instrumentation, and medical imaging where single-shot accuracy at moderate sample rates is required. The ADS8482 family sits in the power-management-and-conversion IC hierarchy: ADC -> data converter -> signal-chain IC -> mixed-signal semiconductor.
Key differentiating specifications include 1 MSPS guaranteed throughput, an internal low-drift 4.096 V reference that eliminates an external reference IC, true 18-bit no-missing-codes performance, 1 LSB (max) INL and DNL, pseudo-bipolar fully differential inputs accepting ±VREF, and a 48-pin VQFN PowerPAD that keeps theta_JA low enough for industrial operation without a heatsink. The wide digital-interface flexibility (18/16/8-bit) lets designers connect it directly to 8-bit microcontrollers, 16-bit DSPs, or 18-bit ASICs without external glue logic.
Architecturally, the ADS8482 combines a charge-redistribution SAR DAC, an on-chip precision bandgap reference, a differential input front end, and a digital interface engine that supports byte, word, and full-word readback. The pseudo-bipolar input accepts signals from -VREF to +VREF around mid-scale (2.048 V), which simplifies signal conditioning for many sensor-bridge and bipolar transducer outputs.
Typical applications include medical imaging front ends, industrial process-control data acquisition cards, precision weigh scales, optical sensor interfaces, and vibration analysis. The 1 MSPS throughput and 18-bit resolution make it a strong fit for multiplexed multi-channel systems where one ADC serves many slow sensors.
A primary design consideration is bypassing: the reference pin and AVDD rails each require a low-ESR ceramic plus bulk capacitor placed within a few millimeters of the package to achieve the datasheet SNR and DNL. Pseudo-bipolar inputs must be DC-biased to mid-scale via high-impedance resistor networks to avoid clipping on negative excursions.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.
Alternatif penggantian untuk ADS8482IRGZR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ADS8482IRGZR (sama faktor bentuk dan footprint) — berbeda di dalam Package, Data Interface, Operating Temperature, Architecture, Resolution.
ADS8482IBRGZR
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADS8481IRGZR
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADS8472IRGZR
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADS8472IBRGZR
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADS8482IRGZR Rating Maksimal & Karakteristik Listrik
| Resolusi | 18 bit |
| Sample Rate | 1 MSPS |
| Architecture | SAR (Successive Approximation Register) |
| Input Channels | 1 differential (pseudo-bipolar) |
| Input Range | 0 V to 4.096 V (pseudo-bipolar, ±VREF) |
| Internal Reference Voltage | 4.096 V |
| Digital Interface | Parallel (18/16/8-bit selectable) |
| Supply Voltage (AVDD) | 5 V (typ) |
| Suhu Kerja | -40C to +85C (industrial) |
| Paket | 48-VQFN (RGZ) 7x7 mm with PowerPAD |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin ADS8482IRGZR
| Pin produk 1 | AVDD — Analog supply voltage |
| Pin produk 2 | AGND — Analog ground |
| Pin produk 3 | REF — Reference voltage I/O (4.096 V internal) |
| Pin produk 4 | IN+ — Positive differential analog input |
| Pin produk 5 | IN- — Negative differential analog input |
| Pin produk 6 | AVDD — Analog supply voltage |
| Pin produk 7 | AGND — Analog ground |
| Pin produk 8 | CONVST — Conversion start input |
| Pin produk 9 | CS — Chip select input |
| Pin produk 10 | RD — Read input |
| Pin produk 11 | BUSY — Conversion busy output |
| Pin produk 12 | DB0 — Data bit 0 (LSB) |
| Pin produk 13 | DB1 — Data bit 1 |
| Pin produk 14 | DB2 — Data bit 2 |
| Pin produk 15 | DB3 — Data bit 3 |
| Pin produk 16 | DB4 — Data bit 4 |
| Pin produk 17 | DB5 — Data bit 5 |
| Pin produk 18 | DB6 — Data bit 6 |
| Pin produk 19 | DB7 — Data bit 7 |
| Pin produk 20 | DB8 — Data bit 8 |
| Pin produk 21 | DB9 — Data bit 9 |
| Pin produk 22 | DB10 — Data bit 10 |
| Pin produk 23 | DB11 — Data bit 11 |
| Pin produk 24 | DB12 — Data bit 12 |
| Pin produk 25 | DB13 — Data bit 13 |
| Pin produk 26 | DB14 — Data bit 14 |
| Pin produk 27 | DB15 — Data bit 15 |
| Pin produk 28 | DB16 — Data bit 16 |
| Pin produk 29 | DB17 — Data bit 17 (MSB) |
| Pin produk 30 | DVDD — Digital supply voltage |
| Pin produk 31 | DGND — Digital ground |
| Pin produk 32 | BYTE — Byte/word select |
| Pin produk 33 | RESET — Reset input |
| Pin produk 34 | RANGE — Input range select |
| Pin produk 35 | NC — Not connected |
| Pin produk 36 | NC — Not connected |
| Pin produk 37 | AGND — Analog ground |
| Pin produk 38 | REFGND — Reference ground |
| Pin produk 39 | REF — Reference decoupling |
| Pin produk 40 | AVDD — Analog supply voltage |
| Pin produk 41 | AGND — Analog ground |
| Pin produk 42 | AVDD — Analog supply voltage |
| Pin produk 43 | IN+ — Positive differential analog input |
| Pin produk 44 | IN- — Negative differential analog input |
| Pin produk 45 | AVDD — Analog supply voltage |
| Pin produk 46 | AGND — Analog ground |
| Pin produk 47 | REF — Reference decoupling |
| Pin produk 48 | PowerPAD — Thermal pad (connect to AGND) |
Aplikasi Umum
ADS8482IRGZR cocok untuk 7 aplikasis: Industrial Process Control Data Acquisition, Medical Imaging Front End, Precision Weigh Scale and Load Cell Digitization, Optical Sensor and Photodiode Array Digitization, Vibration Analysis and Condition Monitoring, Automated Test Equipment (ATE) and Instrumentation, Power Quality and Energy Metering.
Industrial Process Control Data Acquisition
The ADS8482IRGZR's 18-bit resolution at 1 MSPS makes it a strong fit for multiplexed industrial process-control DAQ cards where one ADC serves multiple slow sensors. The 1 MSPS throughput supports 10 kHz per channel across 100+ channels with software sequencing, and the internal 4.096 V reference eliminates an external reference IC on the bill of materials. The pseudo-bipolar differential input directly digitizes ±10 V industrial signals after resistor-divider scaling, with common-mode noise rejection superior to single-ended ADCs in noisy factory environments. Unlike delta-sigma ADCs that introduce latency unsuitable for closed-loop control, the SAR architecture delivers single-cycle conversions enabling real-time PID feedback.
Direkomendasikan
Medical Imaging Front End
The ADS8482IRGZR is suitable for medical imaging analog front ends such as ultrasound receive channels, CT detector preamps, and patient-monitoring signal chains. Its 18-bit resolution supports the wide dynamic range required to resolve small physiological signals in the presence of large DC offsets, and the 1 MSPS throughput accommodates multiplexed multi-channel probe assemblies. The internal low-drift 4.096 V reference simplifies BOM qualification under medical-device regulatory frameworks (IEC 60601 family) by reducing component count. The pseudo-bipolar differential input accommodates the bipolar outputs of ultrasound TGC amplifiers directly without additional level-shifting circuitry.
Direkomendasikan
Precision Weigh Scale and Load Cell Digitization
The ADS8482IRGZR's 18-bit no-missing-codes performance and internal low-noise reference support direct digitization of bridge-type load cells in precision weigh scales. The differential input accepts the ratiometric output of a strain-gauge bridge tied to the 4.096 V reference, achieving effective system resolution beyond 16 bits after digital filtering. The 1 MSPS sample rate allows oversampling and averaging to push noise-free resolution into the 19-20 bit range for legal-for-trade and laboratory balance applications. Unlike a sigma-delta ADC, the SAR core delivers a fresh conversion every 1 us, supporting dynamic weighing scenarios such as checkweighers and in-motion scales.
Direkomendasikan
Optical Sensor and Photodiode Array Digitization
The ADS8482IRGZR suits high-speed optical sensor readout such as CCD line arrays, photodiode arrays, and spectrometer detector boards. The 1 MSPS throughput supports kilohertz-line-rate line-scan cameras used in industrial inspection and spectroscopy, while the 18-bit dynamic range resolves both bright peaks and weak tails in a single scan. The pseudo-bipolar differential input accepts transimpedance-amplifier outputs biased to mid-scale, accommodating photodiode signals spanning both polarities of the reference. The internal 4.096 V reference provides a stable calibration point for photometric linearity, important in scientific and colorimetric instruments.
Direkomendasikan
Vibration Analysis and Condition Monitoring
The ADS8482IRGZR delivers the dynamic range and bandwidth required for vibration analysis in condition-monitoring systems for motors, bearings, and rotating machinery. With 18-bit resolution sampled at 1 MSPS, the ADC captures spectral content well above the audio band necessary to detect bearing-fault signatures in the 10-50 kHz range. The SAR architecture provides deterministic per-sample timing, which simplifies synchronous sampling across multiple accelerometers. Unlike a delta-sigma ADC, the SAR latency is a single conversion cycle, enabling real-time envelope and RMS computations for predictive-maintenance algorithms running on the host processor.
Direkomendasikan
Automated Test Equipment (ATE) and Instrumentation
The ADS8482IRGZR suits automated test equipment and bench instrumentation where 18-bit absolute accuracy at 1 MSPS is needed to characterize DUTs such as power supplies, DACs, and reference voltages. The internal 4.096 V reference provides a known calibration point, while the flexible 18/16/8-bit parallel interface simplifies connection to legacy 8-bit microcontrollers, modern 32-bit MCUs, or 18-bit ASIC testers. The pseudo-bipolar differential input allows direct measurement of bipolar signals without an input-conditioning amplifier, reducing measurement-path error. The 48-pin VQFN PowerPAD keeps the thermal rise low enough for high-accuracy measurements in densely populated ATE cards.
Direkomendasikan
Power Quality and Energy Metering
The ADS8482IRGZR supports class-0.2 and class-0.5 energy-metering applications where simultaneous sampling of voltage and current channels with high dynamic range is required. The 1 MSPS sample rate easily covers harmonics up to the 40th harmonic of 50/60 Hz mains, while 18-bit resolution captures low-amplitude harmonic content critical for IEC 61000-4-7 compliance. The internal reference and differential inputs simplify the analog front end needed for Rogowski-coil and shunt-based current sensors. Using two ADS8482s in parallel allows simultaneous V/I sampling for three-phase meters without phase-delay distortion.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADS8482IRGZR — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADS8482IBRGZR | ADS8481IRGZR | ADS8472IRGZR | ADS8472IBRGZR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-VQFN (RGZ) 7x7 mm | 48-VQFN (RGZ) - same | 48-VQFN (RGZ) - same | 48-VQFN (RGZ) - same | 48-VQFN (RGZ) - same |
| Resolution | 18 bit | 18 bit | 16 bit | 16 bit | 16 bit |
| Sample Rate | 1 MSPS | 1 MSPS | 1 MSPS | 1 MSPS | 1 MSPS |
| Internal Reference | 4.096 V | 4.096 V | 4.096 V | 4.096 V | 4.096 V |
| Input Topology | Pseudo-bipolar differential | Pseudo-bipolar differential | Pseudo-bipolar differential | True bipolar | True bipolar |
| Interface | Parallel 18/16/8-bit | Parallel 18/16/8-bit | Parallel 18/16/8-bit | Parallel 16/8-bit | Parallel 16/8-bit |
| Operating Temperature | -40C to +85C | -40C to +85C (industrial) | -40C to +85C | -40C to +85C | -40C to +85C (industrial) |
| Approx. Unit Price (qty 100) | $15.60 | ~$15.60 (similar die) | ~$12-13 (16-bit) | ~$13-14 (16-bit) | ~$13-14 (16-bit industrial) |
Diferensiator Kunci
- 18-bit resolution with internal 4.096 V reference in a single IC (vsADS8481IRGZR)
- Pseudo-bipolar differential input accepts bipolar signals directly (vsADS8472IRGZR)
- Selectable 18/16/8-bit parallel interface (vsADS8484 (external reference variant))
Catatan Desain
Decouple AVDD, DVDD and REF pins with low-ESR ceramic capacitors (typically 10 uF bulk + 0.1 uF HF) placed within 5 mm of the package. The internal 4.096 V reference requires a 10 uF X7R bypass on the REF pin to achieve datasheet SNR. Separate analog and digital ground planes tied at a single point near the IC minimize switching noise coupling into the SAR comparator.
Route the differential analog input traces (IN+, IN-) as a matched-length differential pair on the top layer over a continuous ground pour. Keep digital bus lines (DB0-DB17, CONVST, RD, CS, BUSY) routed away from the analog input traces and the REF pin. The 48-VQFN PowerPAD must be soldered to a flooded thermal pad with multiple thermal vias to the inner ground plane for rated theta_JA.
Pseudo-bipolar inputs require DC bias to mid-scale (2.048 V) via high-impedance resistor networks to handle negative input excursions without clipping. Forgetting the mid-scale bias causes the ADC to clip half the input range. Also note that choosing the 8-bit bus mode requires three read cycles to fetch a full 18-bit conversion result - software must issue all three RD strobes before the next CONVST pulse or data will be lost.
The BUSY signal falling edge marks the end of conversion and should be used to trigger the read cycle. Avoid driving CONVST and RD simultaneously; honor the datasheet timing parameters t_WH (CONVST pulse width) and t_RDL (RD low width) to avoid spurious conversions. For multi-MHz bus operation, source-terminate the parallel digital outputs near the IC to prevent ringing on the DB lines.
Informasi Konformitas
RoHS and lead-free compliance per TI product page. AEC-Q100 not applicable - the ADS8482 family targets industrial/medical, not automotive. Halogen-free status not explicitly stated in verified data.
