Analog Devices

ADSP-2101BP-100 16-Bit 25 MIPS DSP | Analog Devices

MPN: ADSP-2101BP-100 ✗ Akhir Hidup
5 V Vdss 68-pin PLCC Package 25 MHz Speed
MOQ: 1 |

ADSP-2101BP-100 Ringkasan

Analog Devices ADSP-2101BP-100 is an obsolete single-chip digital signal processor microcomputer optimized for digital signal processing and other high-speed numeric processing. The device combines a 16-bit architecture, a 25 MHz clock, 25 MIPS execution capability, a 5 V supply, and two serial ports in a 68-pin PLCC package measuring 24.23 mm by 24.23 mm. It belongs to the ADSP-2100 family of processors built around a common DSP core.

A digital signal processor, or DSP, is a microprocessor architecture optimized for arithmetic-intensive operations used to filter, transform, analyze, and compress sampled signals. Within the broader semiconductor hierarchy, the ADSP-2101 is a DSP, a specialized microprocessor, and a single-chip microcomputer. Its architecture combines core computation units, data address generators, a program sequencer, and family-specific resources such as program and data memory RAM, a programmable timer, and serial communication interfaces.

The ADSP-2101's principal documented characteristics include fixed-point processing, a 16-bit word width, a 25 MHz operating frequency, and execution performance of 25 MIPS. Two serial ports support communication-oriented signal-processing systems, while the common ADSP-21xx core and address-generation architecture target high-speed numeric workloads. These characteristics make the device relevant to industrial control, communications, audio processing, instrumentation, and embedded DSP designs that can accommodate the legacy processor and its associated development environment.

The processor uses a 5 V supply and is packaged in a 68-pin PLCC with a reported body size of 24.23 mm by 24.23 mm. As a PLCC package, it was intended for socketed or leaded-board assembly rather than a compact modern ball-grid-array footprint. Board layout, clocking, memory-interface requirements, and software migration should therefore be evaluated against the complete manufacturer documentation before committing the obsolete architecture to a new design.

The ADSP-2101 is suitable for legacy signal-processing systems requiring deterministic numeric computation, serial data transfer, and a dedicated DSP instruction set. Potential applications include industrial process control, communications equipment, audio and speech processing, measurement instrumentation, and embedded control systems. The processor's 25 MIPS capability can support filtering, modulation, waveform generation, and similar workloads when paired with suitable external memory and peripheral implementations.

A critical design consideration is lifecycle risk. Analog Devices identifies the ADSP-2101 as obsolete, so new production designs should account for constrained availability, legacy software support, and long-term sourcing requirements. Board-level work also requires careful attention to the 68-pin PLCC footprint, supply decoupling, clock routing, and compatibility with the associated ADSP-21xx tools and documentation.

This product record combines the manufacturer product information with distributor and technical-index references to distinguish verified electrical and packaging facts from information that still requires engineering confirmation. It also provides application guidance, obsolete-part considerations, and explicit documentation links for engineers evaluating the ADSP-2101BP-100 or maintaining an installed legacy platform.

Alternatif penggantian untuk ADSP-2101BP-100 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ADSP-2101BP-100 (sama faktor bentuk dan footprint) — berbeda di dalam Architecture, Programmable Timer.

Analog Devices
Architecture: Single-chip DSP microcomputer
Programmable Timer: 1 timer
Bandingkan dengan ADSP-2101BP-100 →

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

ADSP-2101BP-100 Spesifikasi

Product Type Fixed-point digital signal processor microcomputer
Word Width 16 bit
Clock Frequency 25 MHz
Execution Speed 25 MIPS
Tegangan Pemuat 5 V
Serial Port Count 2 ports
Architecture ADSP-2100 family common core
Programmable Timer Present
Package Type 68-pin PLCC
Package Body Size 24.23 mm x 24.23 mm
Processor Core Core computation units, data address generators, and program sequencer
Status Lingkungan Hidup Obsolete
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

ADSP-2101BP-100 24.23 mm x 24.23 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk ADSP-2101BP-100 (24.23 mm x 24.23 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 24.23 mm x 24.23 mm untuk ADSP-2101BP-100

Tidak ada data diatribut pin yang tersedia untuk ADSP-2101BP-100.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ADSP-2101BP-100 cocok untuk 6 aplikasis: Industrial Digital Signal Control, Communications Signal Processing, Audio and Speech Processing, Measurement and Instrumentation, Waveform Generation and Control, Legacy Embedded DSP Platform.

🏭

Industrial Digital Signal Control

The ADSP-2101BP-100 fits legacy industrial signal-control platforms that rely on deterministic fixed-point computation. Its 16-bit architecture operates at 25 MHz with 25 MIPS performance, allowing repeated filtering, waveform shaping, and feedback calculations without the overhead of a general-purpose control processor. Two serial ports can connect the DSP to sensors, converters, or downstream controllers. Because the processor is obsolete, this role is most appropriate for maintenance of installed equipment rather than unrestricted new-platform development, and the complete control design should verify environmental, isolation, and sourcing requirements separately.

🌐

Communications Signal Processing

The ADSP-2101BP-100 can serve in legacy communications equipment that performs fixed-point filtering, modulation, demodulation, or data conditioning at a 25 MIPS processing rate. Its two serial ports provide paths for exchanging framed data with radio, network, or codec hardware, while the DSP core and data address generators are intended for high-speed numeric processing. System integration must account for the 5 V supply requirement, 68-pin PLCC footprint, external memory organization, and synchronization between the serial interfaces and the wider communications equipment.

🎧

Audio and Speech Processing

The ADSP-2101BP-100's 16-bit fixed-point DSP core and 25 MIPS execution rate support legacy audio, speech, and acoustic processing functions such as filtering, mixing, modulation, and spectral calculations. Two serial ports can carry PCM or control data between the processor and audio converters or system interfaces. For an existing audio design, the processor can preserve established timing and memory behavior; for a new design, verify output noise, converter interface timing, clocking, and thermal requirements at the system level because those parameters are not established by the processor family summary alone.

🔧

Measurement and Instrumentation

The ADSP-2101BP-100 is appropriate for legacy instrumentation that performs high-speed numeric analysis of sampled waveforms. Its 25 MIPS throughput supports real-time filtering and parameter calculation, while the two serial ports can transfer control commands and processed results. The processor should be paired with suitable converters, references, amplifiers, and memory. Because the available part information does not specify converter interface details, memory capacity, or operating-temperature limits, an instrumentation engineer must confirm those parameters in the manufacturer hardware documentation before revising the analog front end.

⚡

Waveform Generation and Control

The ADSP-2101BP-100 can implement deterministic waveform generation, table lookup, digital filtering, and closed-loop control calculations in legacy embedded equipment. Its dedicated DSP core, 25 MHz clock, and 25 MIPS performance provide predictable numeric throughput, while the programmable timer supports periodic control tasks. Two serial ports can coordinate commands and results with external modules. New implementations should check interrupt latency, timer resolution, memory bandwidth, and output-update timing against the complete ADSP-21xx hardware reference rather than relying solely on the headline clock and MIPS ratings.

🖥️

Legacy Embedded DSP Platform

The ADSP-2101BP-100 is most practical when an existing product must preserve the ADSP-2100-family execution environment and 68-pin PLCC hardware. The common core, 25 MIPS fixed-point processing, 5 V operation, and two serial ports allow established control and signal-processing software to remain on a familiar architecture. Obsolete status makes lifecycle management essential: archive the hardware manuals, software toolchain, boot routines, and board files, and validate every replacement purchase for pinout, temperature grade, and electrical equivalence before using it in maintenance builds.

What is the ADSP-2101BP-100?
The ADSP-2101BP-100 is an obsolete Analog Devices single-chip digital signal processor microcomputer built for high-speed numeric processing. According to the Analog Devices ADSP-2101 product page, the ADSP-2100 family combines core computation units, data address generators, a program sequencer, on-chip RAM, a programmable timer, and serial ports. The exact order is 16-bit fixed-point processing, a 25 MHz clock, and two serial ports in a 68-pin PLCC package.
What are the key specifications of ADSP-2101BP-100 that engineers should know?
The ADSP-2101BP-100 is a 16-bit fixed-point DSP operating from a 5 V supply at 25 MHz and delivering 25 MIPS of execution performance. It includes two serial ports and uses a 68-pin PLCC package measuring 24.23 mm by 24.23 mm. Analog Devices describes the ADSP-2100 family as a common-core architecture for digital signal processing and other high-speed numeric applications, with program and data memory RAM plus a programmable timer.
Where can I download the ADSP-2101BP-100 datasheet PDF?
The official ADSP-2101 datasheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADSP-2101.pdf. The manufacturer product page is also available at https://www.analog.com/en/products/adsp-2101.html and links to documentation, software, and ADSP-21xx product-support resources. The datasheet identifies the device as an obsolete 16-bit, 25 MIPS, 5 V processor with two serial ports.
Where can I find the ADSP-2101BP-100 pinout?
Use the pin-description table and package drawing in the official ADSP-2101 datasheet to determine the ADSP-2101BP-100 pinout. The part is identified in distributor documentation as a 68-pin PLCC device, but the supplied search results do not reproduce the individual terminal names or numbering. Because this record cannot safely reconstruct those assignments, use the manufacturer diagram for PCB routing and verify every signal, supply, ground, and no-connect position before layout release.
Is ADSP-2101BP-100 suitable for industrial signal processing?
The ADSP-2101BP-100 can suit legacy industrial signal-processing equipment when its 25 MIPS fixed-point performance, 25 MHz clock, and two serial ports meet the control requirements. Its dedicated DSP core is intended for high-speed numeric operations such as filtering, modulation, and waveform processing. However, the processor is obsolete, so an industrial design should also address long-term availability, legacy tooling, operating-temperature requirements, and certification of the complete system.
What is the difference between a DSP and a general-purpose microprocessor?
A digital signal processor is a microprocessor architecture optimized for repeated arithmetic-intensive operations on sampled data, while a general-purpose microprocessor prioritizes broad software execution and control. The ADSP-2101BP-100 uses a dedicated DSP core with computation units, data address generators, and a program sequencer, as described by Analog Devices. That organization supports high-speed numeric processing for filtering, communications, audio, and control tasks.
What can replace the ADSP-2101BP-100?
No verified pin-to-pin replacement for the ADSP-2101BP-100 was identified in the available cross-reference results. A functional substitute must still satisfy the strict requirements of a 68-pin PLCC footprint, compatible pin assignments, 5 V operation, appropriate memory and peripheral resources, and equivalent real-time processing capability. Because no candidate MPN is confirmed as drop-in compatible, use the official ADSP-2101 datasheet and ADSP-21xx manuals when evaluating any proposed substitute.
Is ADSP-2101BP-100 the same as ADSP-2101?
The ADSP-2101BP-100 is the orderable package and suffix form of the ADSP-2101 processor family, identified as a 68-pin PLCC device with a 25.23 mm by 25.23 mm class body stated by distributor documentation as 24.23 mm by 24.23 mm. The exact suffix meaning should be confirmed from the manufacturer ordering guide. Do not assume that another package variant of ADSP-2101 has the same footprint, lead geometry, or board-level pin compatibility.
When should I choose the ADSP-2101BP-100 instead of a newer DSP?
Choose the ADSP-2101BP-100 primarily when maintaining an existing legacy design that already uses its ADSP-21xx software, memory interface, and 68-pin PLCC layout. Its 25 MIPS fixed-point performance, 25 MHz clock, and two serial ports can remain appropriate for established DSP tasks. For a new design, favor a currently supported processor with an available software toolchain and supply plan unless preserving the legacy platform outweighs obsolescence and maintenance risk.
Where can I buy ADSP-2101BP-100 online?
Use the Request a Quote form on this page to request ADSP-2101BP-100 availability, sourcing support, and a quotation. The manufacturer identifies the ADSP-2101 as obsolete, so inventory and lifecycle status may require confirmation before an order is placed. The part is listed in distributor results as a 68-pin PLCC processor, but current stock, minimum order quantity, and delivery timing should be confirmed through the quote workflow.
What is the price of ADSP-2101BP-100?
The current ADSP-2101BP-100 quotation is generated through the Request a Quote form on this page. No qualifying price-and-quantity table is present in the available listing results, so this record does not publish a potentially stale price figure. Because Analog Devices identifies the processor as obsolete, request a written quotation that states the sourcing channel, quantity, condition, and any remaining-manufacturing or last-time-buy considerations.
What is the lead time for ADSP-2101BP-100?
Request the current lead time through the Request a Quote form on this page. Analog Devices identifies the ADSP-2101 as obsolete, so the available listing snippets alone do not establish a manufacturing lead time, allocation status, or guaranteed delivery schedule. For maintenance procurement, ask for the estimated ship date, minimum order quantity, source condition, and any traceability or lot-control requirements when submitting the request.
Is ADSP-2101BP-100 in stock?
Stock status for ADSP-2101BP-100 should be confirmed through the Request a Quote form on this page. Distributor and marketplace listings indicate that the obsolete processor has been offered, but those snippets do not establish current inventory. Because obsolete DSP availability can vary by lot and sourcing channel, request a quantity-specific availability confirmation before committing the component to a repair, production, or obsolescence-management schedule.
What is the best Analog Devices equivalent for ADSP-2101BP-100?
No Analog Devices MPN can be presented as a verified drop-in equivalent for ADSP-2101BP-100 from the available information. A same-family ADSP-21xx processor may share architectural resources, but true board-level replacement also requires the same 68-pin PLCC package, matching pin assignments, 5 V electrical compatibility, equivalent memory, timer and serial-port resources, and supported software. Compare those requirements against the official hardware reference before selecting any replacement.
What design information is needed to maintain an ADSP-2101BP-100 system?
Maintain an ADSP-2101BP-100 system using the official ADSP-2101 datasheet, the ADSP-21xx processor manuals, and the associated instruction-set and hardware references. These documents cover the 16-bit common core, 25 MHz operation, 25 MIPS performance, 5 V supply, memory organization, timer, serial ports, and package connections. Also preserve any existing board files, software images, boot code, and development-tool configurations because the processor is obsolete and its legacy toolchain may be difficult to recreate.

Data referensi engineering untuk ADSP-2101BP-100 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the ADSP-2101BP-100 when maintaining a proven legacy design that depends on the ADSP-2100-family core, 25 MHz fixed-point execution, two serial ports, and the existing 68-pin PLCC layout. Its 25 MIPS performance remains useful for established filtering, communications, audio, instrumentation, and control functions. Before committing, verify the complete pinout, memory configuration, clocking, timer, serial interfaces, and software toolchain from the manufacturer documentation. Avoid selecting a generic DSP solely by clock rate: operating-system support, development tools, interrupt behavior, memory architecture, and peripheral compatibility can dominate the migration effort. No verified drop-in replacement is identified, so an alternative should be treated as a redesign candidate unless its footprint, pin assignments, electrical limits, memory interface, and legacy software compatibility are conclusively matched. For new production, a currently supported DSP with a sustainable supply plan is generally the lower-risk choice.

Catatan Desain

Treat the ADSP-2101BP-100 as an obsolete component and preserve the original manufacturer documentation before making engineering changes. The family architecture is shared with other ADSP-21xx processors, but package suffix and pin compatibility must not be inferred from the processor family name alone. Confirm the exact 68-pin PLCC terminal assignments, supply pins, clock pins, memory interface, and serial-port connections against the ADSP-2101 hardware documentation before modifying a PCB.

Use the manufacturer package drawing as the controlling mechanical reference for the 68-pin PLCC footprint. Verify lead pitch, body size, seating-plane orientation, and socket compatibility rather than scaling a footprint from the reported 24.23 mm by 24.23 mm body dimensions. A mechanically incorrect footprint can prevent insertion, create solder-joint defects, or place supply and signal pins incorrectly even when the logical pin names appear equivalent.

Plan the 5 V supply path with local high-frequency bypassing and check all external logic levels for compatibility. Decoupling capacitance, placement, and allowable ESR should be selected from the complete ADSP-2101 hardware reference and the clock requirements of the installed board. Maintain short, symmetric clock routing and isolate noisy switching nodes from sensitive signal paths because processor timing errors can appear as intermittent bus or serial-interface faults.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer identifies ADSP-2101 as obsolete, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was found for this exact orderable MPN in the available product information.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

ADSP-2101BP-100 datasheet ADSP-2101BP-100 specifications ADSP-2101BP-100 pinout ADSP-2101BP-100 datasheet pdf ADSP-2101BP-100 equivalent ADSP-2101BP-100 replacement ADSP-2101BP-100 cross reference ADSP-2101BP-100 price ADSP-2101BP-100 stock Analog Devices ADSP-2101BP-100 ADSP-2101BP-100 68 pin PLCC ADSP-2101BP-100 25 MIPS DSP ADSP-2101BP-100 industrial control ADSP-2101BP-100 lead time ADSP-2101BP-100 obsolete replacement

Komponen dan Istilah Terkait

Analog Devices ADSP-2101BP-100 ADSP-2101 ADSP-2100 family ADSP-21xx digital signal processor DSP fixed-point processor single-chip microcomputer specialized microprocessor 16-bit architecture 25 MHz clock 25 MIPS 5 V supply two serial ports program sequencer data address generators program memory RAM data memory RAM programmable timer 68-pin PLCC industrial signal processing communications signal processing audio processing obsolete component lifecycle
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ