ADSP-2101BP-100 16-Bit 25 MIPS DSP | Analog Devices
부품 번호: ADSP-2101BP-100 ✗ 단종ADSP-2101BP-100 개요
A digital signal processor, or DSP, is a microprocessor architecture optimized for arithmetic-intensive operations used to filter, transform, analyze, and compress sampled signals. Within the broader semiconductor hierarchy, the ADSP-2101 is a DSP, a specialized microprocessor, and a single-chip microcomputer. Its architecture combines core computation units, data address generators, a program sequencer, and family-specific resources such as program and data memory RAM, a programmable timer, and serial communication interfaces.
The ADSP-2101's principal documented characteristics include fixed-point processing, a 16-bit word width, a 25 MHz operating frequency, and execution performance of 25 MIPS. Two serial ports support communication-oriented signal-processing systems, while the common ADSP-21xx core and address-generation architecture target high-speed numeric workloads. These characteristics make the device relevant to industrial control, communications, audio processing, instrumentation, and embedded DSP designs that can accommodate the legacy processor and its associated development environment.
The processor uses a 5 V supply and is packaged in a 68-pin PLCC with a reported body size of 24.23 mm by 24.23 mm. As a PLCC package, it was intended for socketed or leaded-board assembly rather than a compact modern ball-grid-array footprint. Board layout, clocking, memory-interface requirements, and software migration should therefore be evaluated against the complete manufacturer documentation before committing the obsolete architecture to a new design.
The ADSP-2101 is suitable for legacy signal-processing systems requiring deterministic numeric computation, serial data transfer, and a dedicated DSP instruction set. Potential applications include industrial process control, communications equipment, audio and speech processing, measurement instrumentation, and embedded control systems. The processor's 25 MIPS capability can support filtering, modulation, waveform generation, and similar workloads when paired with suitable external memory and peripheral implementations.
A critical design consideration is lifecycle risk. Analog Devices identifies the ADSP-2101 as obsolete, so new production designs should account for constrained availability, legacy software support, and long-term sourcing requirements. Board-level work also requires careful attention to the 68-pin PLCC footprint, supply decoupling, clock routing, and compatibility with the associated ADSP-21xx tools and documentation.
This product record combines the manufacturer product information with distributor and technical-index references to distinguish verified electrical and packaging facts from information that still requires engineering confirmation. It also provides application guidance, obsolete-part considerations, and explicit documentation links for engineers evaluating the ADSP-2101BP-100 or maintaining an installed legacy platform.
드롭인 대체품: ADSP-2101BP-100 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADSP-2101BP-100 (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Programmable Timer.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청ADSP-2101BP-100 사양
| Product Type | Fixed-point digital signal processor microcomputer |
| Word Width | 16 bit |
| Clock Frequency | 25 MHz |
| Execution Speed | 25 MIPS |
| 공급 전압 | 5 V |
| Serial Port Count | 2 ports |
| Architecture | ADSP-2100 family common core |
| Programmable Timer | Present |
| Package Type | 68-pin PLCC |
| Package Body Size | 24.23 mm x 24.23 mm |
| Processor Core | Core computation units, data address generators, and program sequencer |
| 수명 주기 상태 | Obsolete |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
ADSP-2101BP-100 24.23 mm x 24.23 mm 핀 구성 가이드
ADSP-2101BP-100(24.23 mm x 24.23 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADSP-2101BP-100.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADSP-2101BP-100 적합 용도: 6 애플리케이션s: Industrial Digital Signal Control, Communications Signal Processing, Audio and Speech Processing, Measurement and Instrumentation, Waveform Generation and Control, Legacy Embedded DSP Platform.
Industrial Digital Signal Control
The ADSP-2101BP-100 fits legacy industrial signal-control platforms that rely on deterministic fixed-point computation. Its 16-bit architecture operates at 25 MHz with 25 MIPS performance, allowing repeated filtering, waveform shaping, and feedback calculations without the overhead of a general-purpose control processor. Two serial ports can connect the DSP to sensors, converters, or downstream controllers. Because the processor is obsolete, this role is most appropriate for maintenance of installed equipment rather than unrestricted new-platform development, and the complete control design should verify environmental, isolation, and sourcing requirements separately.
추천
Communications Signal Processing
The ADSP-2101BP-100 can serve in legacy communications equipment that performs fixed-point filtering, modulation, demodulation, or data conditioning at a 25 MIPS processing rate. Its two serial ports provide paths for exchanging framed data with radio, network, or codec hardware, while the DSP core and data address generators are intended for high-speed numeric processing. System integration must account for the 5 V supply requirement, 68-pin PLCC footprint, external memory organization, and synchronization between the serial interfaces and the wider communications equipment.
추천
Audio and Speech Processing
The ADSP-2101BP-100's 16-bit fixed-point DSP core and 25 MIPS execution rate support legacy audio, speech, and acoustic processing functions such as filtering, mixing, modulation, and spectral calculations. Two serial ports can carry PCM or control data between the processor and audio converters or system interfaces. For an existing audio design, the processor can preserve established timing and memory behavior; for a new design, verify output noise, converter interface timing, clocking, and thermal requirements at the system level because those parameters are not established by the processor family summary alone.
추천
Measurement and Instrumentation
The ADSP-2101BP-100 is appropriate for legacy instrumentation that performs high-speed numeric analysis of sampled waveforms. Its 25 MIPS throughput supports real-time filtering and parameter calculation, while the two serial ports can transfer control commands and processed results. The processor should be paired with suitable converters, references, amplifiers, and memory. Because the available part information does not specify converter interface details, memory capacity, or operating-temperature limits, an instrumentation engineer must confirm those parameters in the manufacturer hardware documentation before revising the analog front end.
추천
Waveform Generation and Control
The ADSP-2101BP-100 can implement deterministic waveform generation, table lookup, digital filtering, and closed-loop control calculations in legacy embedded equipment. Its dedicated DSP core, 25 MHz clock, and 25 MIPS performance provide predictable numeric throughput, while the programmable timer supports periodic control tasks. Two serial ports can coordinate commands and results with external modules. New implementations should check interrupt latency, timer resolution, memory bandwidth, and output-update timing against the complete ADSP-21xx hardware reference rather than relying solely on the headline clock and MIPS ratings.
추천
Legacy Embedded DSP Platform
The ADSP-2101BP-100 is most practical when an existing product must preserve the ADSP-2100-family execution environment and 68-pin PLCC hardware. The common core, 25 MIPS fixed-point processing, 5 V operation, and two serial ports allow established control and signal-processing software to remain on a familiar architecture. Obsolete status makes lifecycle management essential: archive the hardware manuals, software toolchain, boot routines, and board files, and validate every replacement purchase for pinout, temperature grade, and electrical equivalence before using it in maintenance builds.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADSP-2101BP-100 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
설계 노트
Treat the ADSP-2101BP-100 as an obsolete component and preserve the original manufacturer documentation before making engineering changes. The family architecture is shared with other ADSP-21xx processors, but package suffix and pin compatibility must not be inferred from the processor family name alone. Confirm the exact 68-pin PLCC terminal assignments, supply pins, clock pins, memory interface, and serial-port connections against the ADSP-2101 hardware documentation before modifying a PCB.
Use the manufacturer package drawing as the controlling mechanical reference for the 68-pin PLCC footprint. Verify lead pitch, body size, seating-plane orientation, and socket compatibility rather than scaling a footprint from the reported 24.23 mm by 24.23 mm body dimensions. A mechanically incorrect footprint can prevent insertion, create solder-joint defects, or place supply and signal pins incorrectly even when the logical pin names appear equivalent.
Plan the 5 V supply path with local high-frequency bypassing and check all external logic levels for compatibility. Decoupling capacitance, placement, and allowable ESR should be selected from the complete ADSP-2101 hardware reference and the clock requirements of the installed board. Maintain short, symmetric clock routing and isolate noisy switching nodes from sensitive signal paths because processor timing errors can appear as intermittent bus or serial-interface faults.
규정 준수 정보
The manufacturer identifies ADSP-2101 as obsolete, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was found for this exact orderable MPN in the available product information.