Analog Devices

ADV3222ARZ-R7 - 800 MHz 4:1 Analog Multiplexer | Analog Devices

MPN: ADV3222ARZ-R7 ✓ Aktif
16-SOIC Package
MOQ: 1 |

ADV3222ARZ-R7 Ringkasan

Analog Devices ADV3222ARZ-R7 is an 800 MHz, 4:1 buffered analog multiplexer with bidirectional channels, a 16-SOIC package, and switching times below 20 ns with 1% settling. It is designed for high-speed signal routing where bandwidth, channel isolation, and fast transitions are more important than low-power operation.

An analog multiplexer is a switching semiconductor that connects one signal path to one of several inputs. A 4:1 device therefore routes four channels through a common output or common terminal. Buffering the switched signal reduces impedance interaction between the source, selected channel, and receiving circuit. The ADV3222 belongs to the analog switch and multiplexer hierarchy, placing it above basic passive switches and alongside high-speed analog-routing ICs used in test systems, communications equipment, video electronics, and data-acquisition systems.

The ADV3222ARZ-R7 offers a minus-3 dB bandwidth of 800 MHz for a 200 mV peak-to-peak input and 750 MHz for a 2 V peak-to-peak input. Its 2400 V/us slew rate supports rapid transitions, while channel switching occurs in less than 20 ns with 1% settling. The bidirectional architecture allows the same package to support routing arrangements in which signal flow is not fixed in advance. Analog Devices also identifies low power consumption of 75 mW at plus or minus 5 V as a key feature.

The device provides strong isolation between channels and is suitable for video performance measurements extending to 100 MHz with 0.1 dB variation. These characteristics make it useful where a source must be selected rapidly without severe insertion loss or crosstalk between selected and unselected paths. Its high-speed buffered architecture is particularly valuable in automated test equipment, broadcast video routing, instrumentation, and communications signal paths.

Typical uses include high-speed video test systems, communications equipment, data-acquisition front ends, ATE, and semiconductor test systems. In each case, the multiplexer can reduce the number of separate signal paths while allowing a controller to select the required channel. The 16-SOIC package is also compatible with conventional surface-mount PCB assembly methods.

Designers should preserve the signal-path symmetry recommended by the manufacturer, place the device close to the driven and receiving circuits, and provide stable supply bypassing. Short, controlled routing is important because even a high-bandwidth multiplexer cannot recover insertion loss, reflections, or crosstalk introduced by poorly terminated PCB traces. Decoupling capacitors should connect directly to the supply and ground pins with minimal loop area.

This page consolidates the key bandwidth, switching, isolation, application, and replacement information engineers need when evaluating the ADV3222ARZ-R7 for a high-speed 4:1 routing design, while also identifying parameter checks that should be completed before selecting a substitute device.

Alternatif penggantian untuk ADV3222ARZ-R7 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ADV3222ARZ-R7 (sama faktor bentuk dan footprint) — berbeda di dalam Power Consumption, Slew Rate, Crosstalk, Number of Circuits, Package.

Analog Devices
Power Consumption: 75 mW at ±5 V
Slew Rate: 2400 V/µs
Number of Circuits: 1
Bandingkan dengan ADV3222ARZ-R7 →
Analog Devices
Power Consumption: 75 mW at +/-5 V
Slew Rate: 2400 V/s
Crosstalk: Lower than -58 dB at 100 MHz
Bandingkan dengan ADV3222ARZ-R7 →

ADV3221ARZ-R7

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 16-SOIC
4:1 analog multiplexer · >800 MHz at -3 dB · <20 ns to 1% settling · <58 dB · 67 dB · ±5 V · +1 · Double-buffered logic

Kontak untuk harga

Lihat Datasheet →

ADV3221ARZ

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 16-SOIC
4:1 · 4 · 1 · Analog · Buffered 4:1 analog multiplexer · Double-buffered logic · 800 MHz at 200 mV p-p · 750 MHz

✓ Ada di Gudang

$7.5469 / Satuan

Lihat Datasheet →

ADV3222ARZ-R7 Spesifikasi

Device Type 4:1 analog multiplexer
Number of Circuits 1 circuit
Channel Direction Bidirectional
Minus-3 dB Bandwidth at 200 mV p-p 800 MHz
Minus-3 dB Bandwidth at 2 V p-p 750 MHz
Slew Rate 2400 V/us
Channel Switching Time Less than 20 ns to 1% settling
Crosstalk Less than 58 dB
Video Performance 100 MHz with 0.1 dB variation
Power Consumption 75 mW at plus or minus 5 V
Rentang Suhu Kerja -40 C to +85 C
Paket 16-SOIC
Tipe Mounting Surface Mount

ADV3222ARZ-R7 16-soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk ADV3222ARZ-R7 (16-soic pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 16-soic untuk ADV3222ARZ-R7

Tidak ada data diatribut pin yang tersedia untuk ADV3222ARZ-R7.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ADV3222ARZ-R7 cocok untuk 6 aplikasis: Automated Semiconductor Test Systems, Broadcast Video Source Routing, Communications Signal Routing, High-Speed Data Acquisition, Video Test Equipment, Wideband Test Fixture Routing.

🖥️

Automated Semiconductor Test Systems

The ADV3222ARZ-R7 fits high-speed automated test equipment that must route instrument or device-under-test signals between several sources and measurement channels. Its 4:1 architecture reduces the number of physical signal paths, while the less-than-20 ns switching time supports rapid test sequencing. An 800 MHz bandwidth at 200 mV peak-to-peak and 2400 V/us slew rate preserve short rise times and wide frequency coverage. The 16-SOIC footprint also simplifies assembly around densely populated tester cards. Signal integrity remains a board-level concern, so use controlled-impedance routing, suitable source and load impedances, and short connections between the multiplexer and the instrument interface.

📺

Broadcast Video Source Routing

The ADV3222ARZ-R7 is appropriate for professional video routing where one receiver must select among four synchronized sources. Analog Devices specifies video performance to 100 MHz with 0.1 dB variation, while the larger-signal bandwidth reaches 750 MHz at 2 V peak-to-peak. Fast settling below 20 ns helps minimize disruption during source changes, and bidirectional channels support flexible routing topologies. The principal design requirement is maintaining controlled impedance from source to mux and from mux to receiver. Use short PCB paths, a continuous reference plane, and termination appropriate to the video standard so reflections and skin effects do not reduce the usable performance of the selected channel.

🌐

Communications Signal Routing

The ADV3222ARZ-R7 can route high-frequency communications signals through a compact four-channel selection network. Its 800 MHz minus-3 dB bandwidth covers a broad range of IF and wideband test signals, while the 2400 V/us slew rate reduces distortion when passing fast transitions. Bidirectional operation allows the same device to support different board-level signal-flow arrangements and simplifies common test fixtures. For RF and broadband installations, keep the selected path short and use impedance-matched terminations. Supply bypassing and grounding should follow the manufacturer layout recommendation because parasitic inductance in a high-speed mux path can otherwise degrade insertion loss and channel-to-channel isolation.

📡

High-Speed Data Acquisition

The ADV3222ARZ-R7 is suitable for data-acquisition front ends that must select among four conditioned or raw input channels before conversion. The buffered topology helps isolate the selected source from the receiving instrument, and the less-than-20 ns switching time supports rapid acquisition sequencing. Its 800 MHz bandwidth is especially useful for waveform integrity, pulse, or communications-related measurements where slow transitions would alter the captured result. Place the mux close to the acquisition input to minimize trace loss, and establish the correct source and load impedances before evaluating bandwidth. The device does not replace front-end gain, filtering, or anti-alias filtering; those functions should be placed according to the required signal range.

📺

Video Test Equipment

The ADV3222ARZ-R7 fits production and laboratory video test equipment that needs to apply or monitor several signal sources. The 100 MHz, 0.1 dB video-performance specification and 750 MHz bandwidth at 2 V peak-to-peak provide adequate margin for common composite and component-video test paths. Its fast channel transition can reduce dead time during automated test sequences, while bidirectional channels support reusable signal paths around source and analyzer instruments. The design should include controlled impedance, minimal connector-to-IC routing, and proper reference-plane continuity. Decouple the supply locally and verify settling at the analyzer rather than assuming the IC alone determines measurement accuracy.

🔧

Wideband Test Fixture Routing

The ADV3222ARZ-R7 is useful in configurable wideband fixtures where four stimulus or measurement channels must reach a common test port. Its 4:1 organization simplifies routing logic, and the 800 MHz bandwidth, 2400 V/us slew rate, and sub-20 ns settling support fast, high-amplitude test waveforms. The 16-SOIC package provides a straightforward surface-mount implementation for fixture boards. Maintain short traces and a continuous ground reference to minimize crosstalk, and use attenuation or gain stages when the selected signal could exceed the device's permitted input range. Confirm the logic-control timing and settling behavior within the complete fixture rather than evaluating only the multiplexer transition in isolation.

What is the ADV3222ARZ-R7?
The ADV3222ARZ-R7 is an 800 MHz, 4:1 buffered analog multiplexer from Analog Devices. It provides bidirectional channels, less than 20 ns switching with 1% settling, and a 16-SOIC package. According to the Analog Devices ADV3222 product page, the device is intended for high-speed, high-slew-rate routing across four channels and is positioned for communications, video, and test applications.
What are the key specifications of ADV3222ARZ-R7 that engineers should know?
The principal ADV3222ARZ-R7 specifications are an 800 MHz minus-3 dB bandwidth at 200 mV peak-to-peak, a 750 MHz bandwidth at 2 V peak-to-peak, a 2400 V/us slew rate, and switching in less than 20 ns with 1% settling. Analog Devices also specifies less than 58 dB crosstalk and 75 mW power consumption at plus or minus 5 V. The device uses a 16-SOIC package.
What is the operating temperature range of ADV3222ARZ-R7?
The ADV3222ARZ-R7 operates from -40 C to +85 C. This temperature range places it in the industrial-oriented operating class for a high-speed analog multiplexer. When using the device in an external enclosure or elevated-temperature equipment, check the complete system temperature at the IC rather than relying only on ambient-air measurements.
How fast does the ADV3222ARZ-R7 switch channels?
The ADV3222ARZ-R7 switches channels in less than 20 ns with 1% settling. According to the Analog Devices ADV3222 product page, this fast transition is supported by a high slew rate of 2400 V/us and an 800 MHz small-signal bandwidth. Actual end-to-end switching time also depends on the source impedance, load, board routing, and measurement threshold.
What bandwidth does ADV3222ARZ-R7 provide at different signal levels?
The ADV3222ARZ-R7 provides an 800 MHz minus-3 dB bandwidth for a 200 mV peak-to-peak signal and 750 MHz for a 2 V peak-to-peak signal. The distinction matters when the selected path must handle larger video waveforms. According to the Analog Devices product documentation, the modest bandwidth change reflects the higher signal-level operating condition.
Where can I download the ADV3222ARZ-R7 datasheet PDF?
The official ADV3222ARZ-R7 documentation is available through the Analog Devices ADV3222 product page at https://www.analog.com/en/products/adv3222.html. The manufacturer page provides the data sheet and product resources, while the device-specific ordering code identifies the 16-SOIC tape-and-reel configuration. Use the manufacturer's pin-description table when assigning PCB nets and checking the truth table.
Where can I find the ADV3222ARZ-R7 pinout?
The ADV3222ARZ-R7 pinout and signal descriptions are shown in the pin-configuration section of the Analog Devices ADV3222 data sheet. The device is packaged in a 16-SOIC outline. Use the package drawing and pin-description table together during PCB design, particularly for supply pins, control inputs, common terminals, and channel terminals.
Is the ADV3222ARZ-R7 suitable for high-speed video routing?
Yes, the ADV3222ARZ-R7 is suitable for high-speed video routing because Analog Devices specifies 800 MHz bandwidth at 200 mV peak-to-peak, 750 MHz at 2 V peak-to-peak, and video performance to 100 MHz with 0.1 dB variation. Its less-than-20 ns channel switching also supports rapid source selection in professional video and test-routing systems.
What can replace the ADV3222ARZ-R7?
The ADV3221ARZ-R7 is the closest same-brand, same-family alternative identified for the ADV3222ARZ-R7. Both belong to Analog Devices' high-speed buffered 4:1 multiplexer family and use the 16-SOIC footprint, with headline bandwidth and switching performance in the same class. Before replacement, verify control-pin polarity, supply arrangements, channel mapping, and every timing threshold in the current design.
Is the ADV3222ARZ-R7 the same as the ADV3221ARZ-R7?
No. The ADV3222ARZ-R7 and ADV3221ARZ-R7 are related 16-SOIC high-speed multiplexers, but they are distinct Analog Devices orderable devices. The shared family makes the ADV3221ARZ-R7 a relevant replacement candidate, yet control logic, channel implementation, and detailed electrical limits must be compared before treating the substitution as drop-in.
What is the best Analog Devices equivalent for ADV3222ARZ-R7?
The ADV3221ARZ-R7 is the best-supported Analog Devices equivalent found for the ADV3222ARZ-R7 because it is a same-family 4:1 high-speed multiplexer in the same 16-SOIC package class. Its 800 MHz bandwidth and less-than-20 ns switching performance provide close parameter proximity. A PCB swap should still follow a full pin-function and logic comparison rather than rely on package identity alone.
When should I choose ADV3222ARZ-R7 over ADV3221ARZ-R7?
Choose the ADV3222ARZ-R7 when its exact control interface and channel behavior match the existing schematic and signal requirements. Consider the ADV3221ARZ-R7 when its pin functions and electrical characteristics are confirmed compatible. Both offer approximately 800 MHz bandwidth and less-than-20 ns settling, so final selection should emphasize logic polarity, channel routing, supply pins, and application-specific isolation.
Is ADV3222ARZ-R7 suitable for communications and automated test equipment?
The ADV3222ARZ-R7 is suitable for communications and automated test equipment because it combines an 800 MHz bandwidth, 2400 V/us slew rate, bidirectional channels, and less-than-20 ns switching. These characteristics support fast routing of high-frequency test signals and communications waveforms. Preserve controlled impedance and use suitable terminations to maintain signal integrity beyond the IC package.
How should the ADV3222ARZ-R7 be bypassed on a PCB?
Place the supply-bypass capacitors immediately beside the corresponding power and ground pins, using the capacitor values and layout guidance specified in the manufacturer data sheet. Keep each bypass loop compact and connect it directly to the device pins rather than routing through shared traces. Proper grounding and symmetrical signal routing help preserve the advertised bandwidth and minimize crosstalk.
Where can I request a quote for ADV3222ARZ-R7?
Use the Request a Quote form on this page to request current pricing, stock, minimum order quantity, and lead time for the ADV3222ARZ-R7. Quote requests should include the complete orderable MPN, target quantity, acceptable packing format, and delivery destination. This approach provides current purchasing information without relying on a stale static price.
Is ADV3222ARZ-R7 currently in production and how long is the lead time?
Analog Devices lists the ADV3222 family as production, and the ADV3222 product page identifies the family as PRODUCTION. Current lead time and stock vary with order quantity and supply conditions, so request both through the Request a Quote form on this page. Include the desired delivery date and packaging requirements so the supply response reflects the actual production need.

Data referensi engineering untuk ADV3222ARZ-R7 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the ADV3222ARZ-R7 when the design requires a high-speed, bidirectional 4:1 mux with an 800 MHz bandwidth at 200 mV peak-to-peak, less-than-20 ns settling, and a 16-SOIC footprint. It is particularly appropriate for automated test, video routing, communications fixtures, and wideband data-acquisition paths. Consider the ADV3221ARZ-R7 when its control-pin polarity, channel mapping, and detailed electrical limits match the target design and the manufacturer confirms interchangeability. The ADV3221ARZ is another same-package family candidate, but its orderable suffix and supply configuration must be checked before substitution. Neither related family member should replace the ADV3222ARZ-R7 solely on the basis of package and headline bandwidth. Review pin functions, logic polarity, supply voltage, input range, insertion loss, isolation, timing, and absolute maximum ratings before approving a PCB change.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ADV3221ARZ-R7 ADV3221ARZ
Brand Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC - same 16-SOIC - same
Device Type 4:1 analog multiplexer 4:1 analog multiplexer 4:1 analog multiplexer
Minus-3 dB Bandwidth at 200 mV p-p 800 MHz 800 MHz 800 MHz
Channel Switching Time Less than 20 ns with 1% settling Less than 20 ns with 1% settling Less than 20 ns with 1% settling

Diferensiator Kunci

  • Provides a complete four-channel routing function in one buffered device (vsADV3221ARZ-R7)
  • Maintains wide signal-level bandwidth for video and pulse testing (vsADV3221ARZ)
  • Combines high bandwidth with rapid channel settling (vsADV3221ARZ-R7)

Catatan Desain

Keep every mux connection short and route each channel over a continuous reference plane. Avoid stubs, unnecessary vias, and long loops around the device because PCB inductance and capacitance can degrade insertion loss and isolation even when the IC bandwidth is adequate. Use the same controlled-impedance geometry for all four channels so timing and amplitude behavior remain similar after selection.

Place the manufacturer-recommended bypass capacitors directly beside the power and ground pins. Each capacitor-to-pin connection should form the shortest possible loop, with a substantial ground-plane connection and no shared narrow neck between devices. This arrangement reduces supply impedance at high switching rates and helps prevent transient supply movement from disturbing the selected signal channel.

Terminate the source and load for the impedance and bandwidth of the selected path. Incorrect source impedance can alter the effective bandwidth and transition rate, while an inappropriate load can create reflections that appear as extra ringing or poor settling. Validate the complete path with the actual source impedance, load, cable or connector, PCB geometry, and measurement bandwidth.

Do not treat the less-than-20 ns switching specification as the total time required for a system waveform to settle. External capacitance, load impedance, connector delay, PCB propagation, and the measurement threshold all contribute to observed timing. Check the control sequence and allow adequate guard time before evaluating a newly selected channel in automated equipment.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes were not identified in the retrieved manufacturer, distributor, or catalog information. Verify the current declarations for the exact orderable MPN before treating the device as RoHS, REACH, lead-free, halogen-free, or AEC-Q100 qualified.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

ADV3222ARZ-R7 datasheet ADV3222ARZ-R7 pinout ADV3222ARZ-R7 datasheet pdf ADV3222ARZ-R7 equivalent ADV3222ARZ-R7 replacement ADV3222ARZ-R7 cross reference ADV3222ARZ-R7 vs ADV3221ARZ-R7 ADV3222ARZ-R7 footprint ADV3222ARZ-R7 price ADV3222ARZ-R7 stock Analog Devices ADV3222ARZ-R7 ADV3222 800 MHz multiplexer ADV3222ARZ-R7 video routing ADV3222ARZ-R7 test equipment

Komponen dan Istilah Terkait

Analog Devices ADV3222ARZ-R7 ADV3221ARZ-R7 ADV3221ARZ analog multiplexer 4:1 multiplexer analog switch interface IC high-speed routing buffered multiplexer bidirectional channel minus-3 dB bandwidth slew rate switching time crosstalk insertion loss signal integrity controlled impedance SOIC-16 surface mount SMD semiconductor video routing automated test equipment communications equipment
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ