AKM

AK5351VF - 20-Bit Stereo ADC | Asahi Kasei Microdevices

MPN: AK5351VF ✓ Aktif
24-VSOP Package
MOQ: 1 |

AK5351VF Ringkasan

Asahi Kasei Microdevices/AKM AK5351VF is a 20-bit, two-channel, 64-times-oversampling delta-sigma analog-to-digital converter designed for stereo digital audio systems. It uses Enhanced Dual bit modulator architecture and is supplied in a 24-VSOP package. The converter supports simultaneous processing of two stereo-related input channels, while the 20-bit representation provides sufficient resolution for professional and consumer digital audio equipment.

An audio ADC is an analog-to-digital converter optimized for capturing continuously varying audio waveforms. Within the signal-chain hierarchy, it converts left and right microphone, line, or playback signals into digital samples for transmission, storage, mixing, or further processing. The AK5351VF belongs to the ADC/DAC class of data-conversion integrated circuits, combining a delta-sigma modulator with digital decimation and stereo-channel processing. Its 64fs oversampling architecture places substantial filtering and noise-shaping requirements around the conversion process.

The principal identified characteristics are 20-bit resolution, 64fs oversampling, and two audio channels. Enhanced Dual bit architecture is the converter’s defining implementation feature and is intended to provide a wider dynamic range while controlling the demands associated with delta-sigma conversion. These characteristics make the device relevant to audio capture and monitoring systems in which two-channel conversion is required and direct digital audio output is preferable to basic analog digitization.

The AK5351VF is intended for stereo digital systems rather than general-purpose instrumentation. A typical signal path places one analog source on each conversion channel, followed by the converter’s digital interface and downstream audio processing. System designers must account for input bandwidth, analog front-end behavior, clock requirements, supported digital audio format, and power-supply cleanliness. Because the converter performs high-resolution oversampling, board-level grounding and decoupling remain important for preserving low-level audio fidelity.

Typical applications include professional digital mixers, multichannel monitoring controllers, broadcast consoles, USB or FireWire audio interfaces, stereo recording equipment, and high-end consumer audio systems. Two-channel devices such as this ADC are especially useful where simultaneous left and right signal conversion is required. Systems requiring more than two channels will generally need additional converter instances or a multichannel audio-conversion architecture.

For a new design, use the manufacturer datasheet pin-description table, electrical characteristics, and application circuit before assigning PCB nets. Pay particular attention to analog input routing, grounding, digital interface mode, master-clock relationships, and the treatment of unused inputs. The VF ordering code is associated with tape-and-reel production according to the listed product information.

This page organizes the verified AK5351VF product facts into an engineering-oriented guide covering stereo ADC selection, application fit, interface considerations, and replacement evaluation. It also distinguishes a documented drop-in substitute from merely similar converters so that board-level compatibility is not inferred from resolution or channel count alone.

Alternatif penggantian untuk AK5351VF — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

AK5351VF Rating Maksimal & Karakteristik Listrik

Product Type Stereo delta-sigma audio analog-to-digital converter
Resolusi 20 bit
Number of Channels 2 channels
Oversampling Ratio 64x (64fs)
Modulator Architecture Enhanced Dual bit architecture
Paket 24-VSOP
Tipe Mounting Surface mount
Packaging Tape & Reel (TR)
Production Status Fully developed and mass-produced

AK5351VF 24-vsop Diamant Konfigurasi Panduan

Konfigurasi pin untuk AK5351VF (24-vsop pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 24-vsop untuk AK5351VF

Tidak ada data diatribut pin yang tersedia untuk AK5351VF.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

AK5351VF cocok untuk 6 aplikasis: Professional Digital Mixing Console, USB Audio Interface, Digital Broadcast Console, Stereo Recording and Monitoring Equipment, High-End Consumer Audio System, Audio Interface for Industrial Monitoring.

🎧

Professional Digital Mixing Console

The AK5351VF fits a professional mixing console input channel that requires simultaneous conversion of two analog signals into a high-resolution digital audio stream. Its documented 20-bit resolution provides ample headroom for a 64fs oversampling conversion path, while the two-channel architecture supports paired processing such as stereo line inputs. The converter can sit behind a balanced input network and feed a digital processing backplane. Designers should confirm the exact dynamic range, input impedance, clocking method, and digital format in the manufacturer datasheet before finalizing the analog front end.

🖥️

USB Audio Interface

The AK5351VF can serve as the stereo analog-to-digital stage in a USB audio interface that converts left and right line inputs into a digital stream for a USB controller. Its two channels and 20-bit output resolution align with conventional stereo interface architectures, while the 64fs oversampling architecture provides the converter front end required by the selected audio engine. The implementation must account for master-clock generation, supported sample rates, interface voltage levels, latency, and ground separation between the audio converter and digital controller.

🎙️

Digital Broadcast Console

The AK5351VF is appropriate for consideration in a digital broadcast console or studio monitoring system that converts stereo program or monitoring signals at a high internal resolution. The device’s two-channel organization simplifies paired left/right conversion, and its 20-bit resolution supports processing headroom in a 64fs oversampling architecture. Practical adoption requires checking the converter’s documented audio performance, supported digital interface, reference-clock behavior, and channel latency against the console’s routing and synchronization requirements.

🎧

Stereo Recording and Monitoring Equipment

The AK5351VF can form the stereo capture front end of recording equipment or a professional monitor controller. Two analog channels allow left and right program signals to be digitized simultaneously, while 20-bit conversion and 64fs oversampling provide a suitable foundation for a high-resolution processing chain. The analog input circuitry still determines much of the system’s noise and headroom, so balanced inputs, reference-voltage design, and grounding must follow the manufacturer’s application circuit. Digital transport and storage remain separate system functions.

🔊

High-End Consumer Audio System

The AK5351VF is suitable for a high-end consumer audio product that captures stereo audio and processes it digitally before playback, storage, or network transmission. Its 20-bit resolution and two-channel format match a conventional stereo architecture, while the 64fs oversampling design supports noise shaping and digital filtering. For an implementation, compare the converter’s documented dynamic range, distortion, operating supplies, and digital output format with the system’s analog front end and digital signal processor. Clocking and ground partitioning are central to preserving audio performance.

🏭

Audio Interface for Industrial Monitoring

The AK5351VF can be evaluated for a two-channel industrial audio-monitoring system that digitizes stereo machine or environmental audio for analysis. The 20-bit format and 64fs oversampling architecture offer a higher-resolution digital representation than basic control-class converters, while the two channels allow simultaneous comparison or binaural capture. Industrial use nevertheless requires checking the operating-temperature limits, clock reliability, supply tolerance, and digital-interface support. Add appropriate input protection, isolation, grounding, and signal conditioning before presenting the converter with external industrial inputs.

What are the key specifications of AK5351VF that engineers should know?
The AK5351VF is a 20-bit, two-channel, 64fs oversampling delta-sigma ADC with Enhanced Dual bit modulator architecture in a 24-VSOP package. According to the Asahi Kasei Microdevices/AKM manufacturer datasheet, it is intended specifically for stereo digital systems. Its primary engineering significance is simultaneous stereo conversion with a 20-bit output resolution and a 64-times oversampling architecture. Exact sampling rate, dynamic range, supply voltage, and digital-interface settings should be selected from the manufacturer datasheet rather than inferred from the product family.
What is the operating voltage of AK5351VF?
The operating supply voltages must be taken from the manufacturer datasheet electrical-characteristics table. The verified product description identifies the AK5351VF as a 20-bit, 64fs, two-channel ADC but does not state separate analog and digital supply ranges. Before schematic design, assign AVDD and digital-interface rails only after confirming their permitted values, tolerance, sequencing requirements, and decoupling recommendations for the exact AK5351VF ordering code. Using the application circuit in the manufacturer datasheet is the appropriate way to implement the power network.
Where can I download the AK5351VF datasheet PDF?
The AK5351VF datasheet is available from the Asahi Kasei Microdevices/AKM document listed on this page. The manufacturer datasheet contains the authoritative pin descriptions, electrical characteristics, digital interface details, application circuit, and recommended operating conditions. The AK5351-VF document should be used for design sign-off because distributor and distributor-aggregator pages may summarize only selected attributes. Open the datasheet PDF link, then use the pin-description and application-circuit sections when laying out the converter.
Where can I find the AK5351VF pinout?
The AK5351VF pinout is defined in the manufacturer datasheet’s pin-description table for the 24-VSOP package. Use that table to identify analog inputs, digital audio outputs, clock signals, power rails, ground connections, and any control or test pins. Because the component mixes sensitive analog inputs with digital clock and data lines, assign the nets directly from the datasheet and preserve the manufacturer’s recommended pin arrangement on the PCB. The verified listing identifies a 24-VSOP package, but it does not reproduce the individual pin numbers.
What is the AK5351VF used for?
The AK5351VF is used as a stereo audio ADC in digital sound-capture and processing systems. Its 20-bit resolution, two conversion channels, and 64fs oversampling ratio suit left/right audio signal acquisition when the downstream system accepts the converter’s digital audio output. Potential uses include professional mixers, broadcast consoles, monitoring controllers, recording equipment, and digital audio interfaces. The correct input range, clocking arrangement, and supported digital format must be confirmed in the manufacturer datasheet before the device is assigned to a specific signal path.
Is AK5351VF suitable for a USB audio interface?
The AK5351VF can be considered for a USB audio interface when that design requires a two-channel, 20-bit stereo ADC and can support its 64fs oversampling architecture. The converter supplies a digital audio stream to the interface controller, but USB transport, clock recovery, packet handling, and power control remain responsibilities of the surrounding design. Confirm the supported digital interface, master-clock relationship, sample-rate range, and input circuitry in the manufacturer datasheet before committing the USB controller to this converter.
Where can I buy AK5351VF online?
Use the Request a Quote form on this page to request AK5351VF availability, order quantities, and current sourcing information. The form allows an engineer to identify the required 24-VSOP tape-and-reel configuration and request a quotation without relying on a stale distributor price. The product listing identifies AK5351VF as a fully developed, mass-produced Asahi Kasei Microdevices/AKM device, but current stock and delivery commitments should be confirmed when the quotation is returned.
What is the price of AK5351VF?
The current AK5351VF price is obtained through the Request a Quote form on this page. Pricing depends on order quantity, package presentation, delivery timing, and current component sourcing, so a static amount can become inaccurate before a purchase order is placed. Submit the required quantity and target destination with the quote request. The structured price evidence for this listing contains no qualifying quantity-break price table, which prevents a misleading unit-price figure from being published.
What is the lead time for AK5351VF?
Request the current AK5351VF lead time using the Request a Quote form on this page. The manufacturer product information describes the device as fully developed and mass-produced, but it does not provide a fixed delivery interval or a guaranteed stock quantity. The quotation response should state the lead time, available quantity, and any manufacturer or distribution allocation conditions. This approach is preferable to treating a distributor search result as a binding supply commitment.
Is AK5351VF in stock?
AK5351VF stock status should be confirmed through the Request a Quote form on this page for the quantity and packaging needed by the design. The device is listed as fully developed and mass-produced and is associated with tape-and-reel packaging, but that status alone does not guarantee immediately available inventory. A current quote response should identify stock allocation and expected dispatch timing. Use the exact AK5351VF ordering code in the request to avoid mismatched package variants.
What is the best drop-in replacement for AK5351VF?
No verified pin-to-pin drop-in replacement for AK5351VF was established from the available cross-reference results. The AK5380VT appeared in a product comparison, but it is a 24-bit, 96 kHz converter in a 16-TSSOP package rather than the AK5351VF’s 24-VSOP package, so it is not a drop-in substitute. The closest alternative must match the 24-VSOP footprint, pin assignments, power architecture, clocking, digital interface, and critical conversion specifications. Submit the board and target parameters for a replacement review.
Can AK5380VT replace AK5351VF?
The AK5380VT cannot be treated as a direct drop-in replacement for the AK5351VF because the documented packages differ. The AK5380VT is identified as a 24-bit, 96 kHz ADC in a 16-TSSOP package, while the AK5351VF is identified as a 20-bit, 64fs ADC in a 24-VSOP package. Differences in pin count, footprint, resolution, and conversion architecture require PCB and firmware review even if selected functions overlap. It is better considered a redesigned alternative than a pin-compatible substitute.
Is AK5351VF the same as AK5380VT?
No. The AK5351VF and AK5380VT are different stereo audio ADC devices with different documented resolutions and packages. The AK5351VF is a 20-bit, 64fs converter in a 24-VSOP package, whereas the AK5380VT is described as a 24-bit, 96 kHz converter in a 16-TSSOP package. Their functions overlap in audio digitization, but that functional similarity does not establish pin-to-pin compatibility. A board replacement requires matching the footprint, digital interface, clocks, supplies, and system behavior.
What is the best Asahi Kasei Microdevices/AKM equivalent for AK5351VF?
No Asahi Kasei Microdevices/AKM drop-in equivalent for the AK5351VF was confirmed by the available cross-reference results. The device’s defining combination is 20-bit resolution, two channels, 64fs oversampling, Enhanced Dual bit architecture, and a 24-VSOP package. A valid equivalent must match that footprint and remain compatible with the system’s clock and digital-audio architecture. Submit the application requirements and package drawing for an engineering equivalence review rather than treating a same-family converter as automatically interchangeable.
When should I choose AK5351VF over another stereo ADC?
Choose the AK5351VF when the design specifically benefits from a 20-bit, two-channel, 64fs oversampling delta-sigma ADC in a 24-VSOP package. Its architecture targets stereo digital systems, making it appropriate for audio capture, monitoring, recording, and interface applications. Select another converter when it provides a documented drop-in footprint match, higher resolution, lower power consumption, a required interface mode, or a broader sample-rate range. The final choice must be based on the complete analog, digital, clocking, supply, and environmental requirements.
Is AK5351VF suitable for a professional recording console?
The AK5351VF is suitable for consideration in a professional recording console when two analog channels must be converted for stereo or paired processing. Its 20-bit resolution, 64fs oversampling architecture, and Enhanced Dual bit converter implementation are specifically described for stereo digital systems. Professional deployment still requires verification of dynamic range, total harmonic distortion, clocking, latency, input impedance, and digital-interface support against the console’s signal path. Use the manufacturer electrical characteristics and reference application circuit for final qualification.
How should the AK5351VF power supply be designed?
Design the AK5351VF supply network from the manufacturer datasheet’s power-application circuit and pin descriptions. Separate analog and digital supply pins may require distinct bypass networks, so confirm their permitted voltage ranges and grounding strategy before component selection. Place the required capacitors close to their associated pins, maintain the documented return paths, and avoid routing switching-converter currents through the converter’s analog ground area. Exact capacitor values, voltage ratings, and sequencing rules are defined by the manufacturer documentation.

Data referensi engineering untuk AK5351VF — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AK5351VF when a design requires a dedicated two-channel, 20-bit stereo ADC using a 64fs oversampling delta-sigma architecture and can accommodate its 24-VSOP footprint. It is a logical candidate for professional audio capture, digital mixers, recording equipment, monitoring controllers, and USB or broadcast interfaces after its electrical and digital-interface characteristics are confirmed. Do not choose it merely because another converter also offers stereo audio digitization. Review AK5380VT when its higher documented resolution or 96 kHz operating point is useful, but plan for a PCB redesign because it uses a different package. A drop-in substitute must match the footprint, pinout, clocks, supplies, interface format, and critical audio performance. When no verified drop-in part is available, prefer redesign qualification around the AK5351VF rather than assuming a same-category converter is electrically and mechanically interchangeable.

Diferensiator Kunci

  • Purpose-built two-channel stereo conversion architecture (vsAK5380VT)
  • Enhanced Dual bit modulator implementation (vsAK5380VT)
  • Direct 20-bit stereo conversion in a 24-VSOP package (vsAK5380VT)

Catatan Desain

Route analog inputs and digital outputs according to the manufacturer application circuit, keeping the stereo input paths symmetrical. Place input-network components and the converter as closely as practical to minimize added noise and timing differences between channels. Keep clock traces away from the analog input region, provide a continuous ground reference, and avoid sharing narrow return paths between analog and digital sections. The AK5351VF’s 20-bit resolution and 64fs oversampling architecture can represent subtle signal information, making clean board construction important throughout the audio path.

Implement the analog and digital supply networks from the manufacturer’s recommended application circuit, using the exact capacitor types, values, and placement shown for the AK5351VF. Confirm the permitted voltage ranges and power-up requirements in the electrical-characteristics section before assigning component ratings. Place high-frequency bypass capacitors directly at the relevant supply pins and keep their return current inside the converter’s local ground region. Do not estimate supply values from another AK-series converter, since device-level voltage and sequencing requirements govern the design.

Do not treat a converter with similar resolution, sample rate, or channel count as a physical replacement. The AK5380VT, for example, is documented as a 24-bit, 96 kHz device in a 16-TSSOP package, whereas the AK5351VF uses a 24-VSOP package. A board redesign would be required because package size, pin count, footprint, supply arrangements, and likely interface connections differ. Likewise, do not infer AK5351VF pin functions from a generic ADC diagram; assign every net from the manufacturer’s AK5351-VF pin-description table.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this audio converter.

Data disahkan pada: 2026-11-11 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

AK5351VF datasheet AK5351VF pinout AK5351VF datasheet pdf AK5351VF specifications AK5351VF 24-VSOP AK5351VF equivalent AK5351VF replacement AK5351VF cross reference AK5351VF vs AK5380VT AK5351VF stereo ADC AK5351VF price AK5351VF stock

Komponen dan Istilah Terkait

Asahi Kasei Microdevices/AKM AK5351VF AK5351-VF AK5380VT 20-bit ADC two-channel ADC stereo ADC delta-sigma ADC analog-to-digital converter ADC/DAC 64fs oversampling Enhanced Dual bit architecture digital audio system 24-VSOP VSOP package family surface-mount package tape-and-reel packaging audio mixing console USB audio interface broadcast console digital audio interface master clock analog supply digital supply audio dynamic range
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ