AK5351VF - 20-Bit Stereo ADC | Asahi Kasei Microdevices
부품 번호: AK5351VF ✓ 활성AK5351VF 개요
An audio ADC is an analog-to-digital converter optimized for capturing continuously varying audio waveforms. Within the signal-chain hierarchy, it converts left and right microphone, line, or playback signals into digital samples for transmission, storage, mixing, or further processing. The AK5351VF belongs to the ADC/DAC class of data-conversion integrated circuits, combining a delta-sigma modulator with digital decimation and stereo-channel processing. Its 64fs oversampling architecture places substantial filtering and noise-shaping requirements around the conversion process.
The principal identified characteristics are 20-bit resolution, 64fs oversampling, and two audio channels. Enhanced Dual bit architecture is the converter’s defining implementation feature and is intended to provide a wider dynamic range while controlling the demands associated with delta-sigma conversion. These characteristics make the device relevant to audio capture and monitoring systems in which two-channel conversion is required and direct digital audio output is preferable to basic analog digitization.
The AK5351VF is intended for stereo digital systems rather than general-purpose instrumentation. A typical signal path places one analog source on each conversion channel, followed by the converter’s digital interface and downstream audio processing. System designers must account for input bandwidth, analog front-end behavior, clock requirements, supported digital audio format, and power-supply cleanliness. Because the converter performs high-resolution oversampling, board-level grounding and decoupling remain important for preserving low-level audio fidelity.
Typical applications include professional digital mixers, multichannel monitoring controllers, broadcast consoles, USB or FireWire audio interfaces, stereo recording equipment, and high-end consumer audio systems. Two-channel devices such as this ADC are especially useful where simultaneous left and right signal conversion is required. Systems requiring more than two channels will generally need additional converter instances or a multichannel audio-conversion architecture.
For a new design, use the manufacturer datasheet pin-description table, electrical characteristics, and application circuit before assigning PCB nets. Pay particular attention to analog input routing, grounding, digital interface mode, master-clock relationships, and the treatment of unused inputs. The VF ordering code is associated with tape-and-reel production according to the listed product information.
This page organizes the verified AK5351VF product facts into an engineering-oriented guide covering stereo ADC selection, application fit, interface considerations, and replacement evaluation. It also distinguishes a documented drop-in substitute from merely similar converters so that board-level compatibility is not inferred from resolution or channel count alone.
드롭인 대체품: AK5351VF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청AK5351VF 최대 정격 & 전기적 특성
| Product Type | Stereo delta-sigma audio analog-to-digital converter |
| 분해능 | 20 bit |
| Number of Channels | 2 channels |
| Oversampling Ratio | 64x (64fs) |
| Modulator Architecture | Enhanced Dual bit architecture |
| 패키지 | 24-VSOP |
| 실장 유형 | Surface mount |
| Packaging | Tape & Reel (TR) |
| Production Status | Fully developed and mass-produced |
AK5351VF 24-vsop 핀 구성 가이드
AK5351VF(24-vsop 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AK5351VF.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AK5351VF 적합 용도: 6 애플리케이션s: Professional Digital Mixing Console, USB Audio Interface, Digital Broadcast Console, Stereo Recording and Monitoring Equipment, High-End Consumer Audio System, Audio Interface for Industrial Monitoring.
Professional Digital Mixing Console
The AK5351VF fits a professional mixing console input channel that requires simultaneous conversion of two analog signals into a high-resolution digital audio stream. Its documented 20-bit resolution provides ample headroom for a 64fs oversampling conversion path, while the two-channel architecture supports paired processing such as stereo line inputs. The converter can sit behind a balanced input network and feed a digital processing backplane. Designers should confirm the exact dynamic range, input impedance, clocking method, and digital format in the manufacturer datasheet before finalizing the analog front end.
추천
USB Audio Interface
The AK5351VF can serve as the stereo analog-to-digital stage in a USB audio interface that converts left and right line inputs into a digital stream for a USB controller. Its two channels and 20-bit output resolution align with conventional stereo interface architectures, while the 64fs oversampling architecture provides the converter front end required by the selected audio engine. The implementation must account for master-clock generation, supported sample rates, interface voltage levels, latency, and ground separation between the audio converter and digital controller.
추천
Digital Broadcast Console
The AK5351VF is appropriate for consideration in a digital broadcast console or studio monitoring system that converts stereo program or monitoring signals at a high internal resolution. The device’s two-channel organization simplifies paired left/right conversion, and its 20-bit resolution supports processing headroom in a 64fs oversampling architecture. Practical adoption requires checking the converter’s documented audio performance, supported digital interface, reference-clock behavior, and channel latency against the console’s routing and synchronization requirements.
추천
Stereo Recording and Monitoring Equipment
The AK5351VF can form the stereo capture front end of recording equipment or a professional monitor controller. Two analog channels allow left and right program signals to be digitized simultaneously, while 20-bit conversion and 64fs oversampling provide a suitable foundation for a high-resolution processing chain. The analog input circuitry still determines much of the system’s noise and headroom, so balanced inputs, reference-voltage design, and grounding must follow the manufacturer’s application circuit. Digital transport and storage remain separate system functions.
추천
High-End Consumer Audio System
The AK5351VF is suitable for a high-end consumer audio product that captures stereo audio and processes it digitally before playback, storage, or network transmission. Its 20-bit resolution and two-channel format match a conventional stereo architecture, while the 64fs oversampling design supports noise shaping and digital filtering. For an implementation, compare the converter’s documented dynamic range, distortion, operating supplies, and digital output format with the system’s analog front end and digital signal processor. Clocking and ground partitioning are central to preserving audio performance.
추천
Audio Interface for Industrial Monitoring
The AK5351VF can be evaluated for a two-channel industrial audio-monitoring system that digitizes stereo machine or environmental audio for analysis. The 20-bit format and 64fs oversampling architecture offer a higher-resolution digital representation than basic control-class converters, while the two channels allow simultaneous comparison or binaural capture. Industrial use nevertheless requires checking the operating-temperature limits, clock reliability, supply tolerance, and digital-interface support. Add appropriate input protection, isolation, grounding, and signal conditioning before presenting the converter with external industrial inputs.
추천
추천 제품 요약
엔지니어링 참조 데이터: AK5351VF — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
주요 차별점
- Purpose-built two-channel stereo conversion architecture (vs AK5380VT)
- Enhanced Dual bit modulator implementation (vs AK5380VT)
- Direct 20-bit stereo conversion in a 24-VSOP package (vs AK5380VT)
설계 노트
Route analog inputs and digital outputs according to the manufacturer application circuit, keeping the stereo input paths symmetrical. Place input-network components and the converter as closely as practical to minimize added noise and timing differences between channels. Keep clock traces away from the analog input region, provide a continuous ground reference, and avoid sharing narrow return paths between analog and digital sections. The AK5351VF’s 20-bit resolution and 64fs oversampling architecture can represent subtle signal information, making clean board construction important throughout the audio path.
Implement the analog and digital supply networks from the manufacturer’s recommended application circuit, using the exact capacitor types, values, and placement shown for the AK5351VF. Confirm the permitted voltage ranges and power-up requirements in the electrical-characteristics section before assigning component ratings. Place high-frequency bypass capacitors directly at the relevant supply pins and keep their return current inside the converter’s local ground region. Do not estimate supply values from another AK-series converter, since device-level voltage and sequencing requirements govern the design.
Do not treat a converter with similar resolution, sample rate, or channel count as a physical replacement. The AK5380VT, for example, is documented as a 24-bit, 96 kHz device in a 16-TSSOP package, whereas the AK5351VF uses a 24-VSOP package. A board redesign would be required because package size, pin count, footprint, supply arrangements, and likely interface connections differ. Likewise, do not infer AK5351VF pin functions from a generic ADC diagram; assign every net from the manufacturer’s AK5351-VF pin-description table.
규정 준수 정보
The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this audio converter.