APA075-TQ144I - 75K-Gate Flash FPGA | Microchip Technology
MPN: APA075-TQ144I ✗ Akhir HidupAPA075-TQ144I Ringkasan
A field-programmable gate array, or FPGA, is a programmable-logic semiconductor that sits between fixed-function ASICs and software-programmable processors. An FPGA integrates configurable logic cells, programmable interconnections, and dedicated I/O resources onto one device. The ProASICPLUS family applies the flash-based configuration approach to designs requiring live power-up operation, reprogrammability, and an ASIC-oriented development flow.
The APA075-TQ144I provides 75,000 gates across 3,072 cells and supports signals up to 180 MHz. Its 107 user I/Os provide substantial board-level connectivity for control logic, data acquisition, communications, and embedded system interfaces. The device uses CMOS technology and is offered in a surface-mount TQFP-144 package with a 0.5 mm pitch. These characteristics make it suitable for designs that need more deterministic hardware behavior than a microcontroller while retaining field programmability.
Architecturally, nonvolatile flash stores the FPGA configuration directly on the device. This removes the need for a configuration flash device or loader ROM for normal operation and allows the programmed logic to become active immediately after power-up. Reprogrammability also supports design revisions, field updates, and production simplification compared with a fully custom ASIC. The implementation must still satisfy the device's I/O, timing, power, and package constraints during design compilation and hardware validation.
Typical applications include industrial control and data acquisition, network interface controllers, communications equipment, embedded processors, test and measurement systems, and general-purpose logic consolidation. In each case, the APA075-TQ144I is useful when parallel interfaces, deterministic timing, flexible logic, and power-up-ready operation justify using a programmable FPGA rather than discrete logic or a conventional microcontroller.
A critical design consideration is package and pin planning. The device uses 144 pins with a 0.5 mm pitch, so the PCB should be designed with conservative lead geometry, adequate solder-mask spacing, and inspection access for fine-pitch assembly. Designers should use the Microchip pin-description table and the final compiler-generated constraint report when assigning package pins and checking timing.
This product record combines the verified APA075 family specifications with practical guidance for FPGA selection, pin-aware PCB implementation, lifecycle planning, and evaluation of genuine same-package alternatives. It is intended to help engineers distinguish an exact temperature and package option from related APA075 configurations before committing a 144-pin board design.
Alternatif penggantian untuk APA075-TQ144I — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian APA075-TQ144I (sama faktor bentuk dan footprint) — berbeda di dalam Package, RoHS Status.
APA075-TQG144I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
APA075-TQ144
✅ Drop-InKontak untuk harga
Lihat Datasheet →APA075-TQG144
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
APA075-FTQ144I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
APA075-FTQG144I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
APA075-TQ144I Rating Maksimal & Karakteristik Listrik
| Product Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | ProASICPLUS APA075 |
| Logic Gates | 75,000 gates |
| Programmable Cells | 3,072 cells |
| Maximum Operating Frequency | 180 MHz |
| User I/O Count | 107 I/Os |
| Configuration Memory Technology | Nonvolatile flash |
| Process Technology | CMOS |
| Paket | 144-pin TQFP, surface mount |
| Package Pin Count | 144 pins |
| Package Pitch | 0.5 mm |
| Package Body Size | 20 x 20 mm |
| Power-Up Configuration | Live at power-up |
| Reprogrammability | Yes |
| Status RoHS | RoHS compliant |
APA075-TQ144I 20 x 20 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk APA075-TQ144I (20 x 20 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk APA075-TQ144I.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
APA075-TQ144I cocok untuk 6 aplikasis: Industrial Control Logic, Data Acquisition Systems, Network Interface Controller, Test and Measurement Equipment, Embedded Processor Subsystems, Communications Equipment.
Industrial Control Logic
The APA075-TQ144I fits industrial control systems that need deterministic parallel logic, numerous peripheral connections, and power-up-ready behavior. Its 75,000 gates and 3,072 programmable cells can consolidate sequencing, interlocks, counters, and machine-state logic, while 107 user I/Os provide connections to sensors, relay drivers, and operator interfaces. Nonvolatile flash configuration allows the programmed controller to become operational immediately at power-up without a separate configuration loader. The 180 MHz maximum frequency supports demanding control datapaths, although the design should be constrained using actual board and peripheral timing. The 144-pin TQFP package also requires careful PCB layout for its 0.5 mm lead pitch.
Direkomendasikan
Data Acquisition Systems
The APA075-TQ144I is suitable for parallel data-acquisition front ends that must coordinate multiple converters, counters, buffers, and digital signal processing. Its 107 user I/Os allow several converters and digital interfaces to share a common programmable controller, while the 3,072-cell array can implement sampling control and data-format conversion in hardware. The device's 180 MHz operating capability allows timing-critical sequencing to run in parallel rather than through a software loop. Flash-based configuration is useful when deterministic startup is required after power restoration. Engineers should match acquisition timing to external converter latency and use the manufacturer's pin table to assign banks and clock-capable pins without introducing signal-integrity problems.
Direkomendasikan
Network Interface Controller
The APA075-TQ144I can implement deterministic network framing, protocol conversion, packet filtering, or host-interface logic in a programmable FPGA. Its 75,000 gates provide capacity for parallel datapaths and state machines, while 107 I/Os accommodate byte-wide buses, control signals, and multiple physical interfaces. The ProASICPLUS flash configuration preserves the network personality in nonvolatile memory and supports live power-up operation, which is useful in equipment that cannot wait for an external configuration sequence. The 180 MHz device speed supports demanding clock-domain logic. Clock planning, input synchronizers, and I/O voltage compatibility remain essential because the legacy family predates many current high-speed transceiver interfaces.
Direkomendasikan
Test and Measurement Equipment
The APA075-TQ144I fits instrumentation architectures that require flexible timing, pattern generation, acquisition control, and protocol handling. A single programmable device can coordinate stimulus generation, counters, trigger logic, and data capture around 107 user I/Os, reducing the need for separate programmable-logic devices. Its nonvolatile flash configuration allows the instrument to restore its measurement personality immediately at power-up, and its 180 MHz maximum operating frequency supports moderately high-rate digital test paths. The same-family alternatives permit sourcing and qualification options without changing the 144-pin TQFP board footprint. Final timing closure should include instrument clock jitter, external driver delay, and the propagation requirements of the selected 144-pin pin assignment.
Direkomendasikan
Embedded Processor Subsystems
The APA075-TQ144I can surround an embedded processor with dedicated hardware for bus arbitration, timers, interrupts, data movement, and peripheral control. Its 3,072 programmable cells and 107 I/Os allow processor-side functions to be consolidated without placing every timing-critical operation in software. The nonvolatile flash configuration makes the subsystem operational at power-up, which can simplify boot sequencing for industrial or communications equipment. At up to 180 MHz, the FPGA can implement wide datapaths and parallel protocol engines alongside the processor. Engineers should use the final compiler constraints to partition clock domains, establish reset behavior, and verify that peripheral voltage levels are supported by the selected I/O assignments.
Direkomendasikan
Communications Equipment
The APA075-TQ144I is useful in communications equipment for line-interface control, framing, buffering, multiplexing, and supervisory logic. Its 75,000 gates can consolidate several fixed functions into one programmable device, while 107 user I/Os provide broad connectivity for parallel buses and control channels. Flash configuration supports field updates and retains the programmed function through power cycles, and live power-up behavior can shorten equipment startup sequences. The 180 MHz operating limit is suitable for many legacy parallel-interface designs but should be checked against modern serial transceiver timing. Layout must separate sensitive clock and data paths, provide controlled return paths, and account for the 0.5 mm pitch of the TQFP-144 package.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk APA075-TQ144I — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | APA075-TQG144I | APA075-TQ144 | APA075-TQG144 | APA075-FTQ144I | APA075-FTQG144I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-144 (20 x 20 mm) | TQFP-144 (20 x 20 mm) | TQFP-144 (20 x 20 mm) | TQFP-144 (20 x 20 mm) | TQFP-144 (20 x 20 mm) | TQFP-144 (20 x 20 mm) |
Diferensiator Kunci
- Exact TQ144I industrial-ordering option (vsAPA075-TQ144)
- Directly documented same-package replacement candidate (vsAPA075-TQG144I)
- Same-family sourcing flexibility without changing the board footprint (vsAPA075-FTQ144I)
Catatan Desain
Design the PCB for a 144-pin TQFP with 0.5 mm lead pitch and a 20 x 20 mm body. Use the manufacturer package drawing for land geometry, and inspect the assembly process against that drawing before release. Keep sensitive clock and data routes away from power-supply switching nodes, provide continuous ground references where possible, and reserve programming or configuration-access circuitry on pins selected by the final compiler constraints.
Determine core and I/O supply requirements from the exact APA075 device documentation and the voltage levels driven by external logic. Decouple each supply domain at the package pins with the capacitance and ESR recommendations specified by Microchip Technology. Because this is a configurable CMOS FPGA, the actual power can vary with logic utilization and switching activity, so validate thermal performance using the final design rather than a nominal device estimate.
Apply the final compiler timing constraints rather than assuming that the advertised 180 MHz maximum applies to every board-level interface. Reserve clock-capable pins, constrain input and output timing, and account for package, board-trace, connector, and external-device delays. Synchronize asynchronous inputs and define reset-domain behavior explicitly; these steps are especially important when a legacy FPGA interfaces with newer logic families.
Do not substitute another APA075 suffix solely because it uses the same TQFP outline. Check the ordering guide for temperature grade, speed grade, package material, and qualification semantics. Also verify that the programming file, configuration scheme, security settings, and device identification are supported by the candidate part. A footprint-compatible device is not automatically a production-equivalent device.
Informasi Konformitas
The APA075-TQ144I comparison record identifies the device as RoHS compliant. Exact-part REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not available for confirmation.