Microchip Technology

APA075-TQ144I - 75K-Gate Flash FPGA | Microchip Technology

Teilenummer: APA075-TQ144I ✗ Abgekündigt
144-pin TQFP, surface mount Package 180 MHz Speed Nonvolatile flash Memory
MOQ: 1 |

APA075-TQ144I Übersicht

The Microchip Technology APA075-TQ144I is a ProASICPLUS field-programmable gate array with 75,000 logic gates, 3,072 programmable cells, 107 user I/Os, and a maximum operating frequency of 180 MHz, housed in a 144-pin TQFP package. The device combines programmable logic with nonvolatile flash configuration memory, allowing the implemented circuit to operate without loading an external program at power-up.

A field-programmable gate array, or FPGA, is a programmable-logic semiconductor that sits between fixed-function ASICs and software-programmable processors. An FPGA integrates configurable logic cells, programmable interconnections, and dedicated I/O resources onto one device. The ProASICPLUS family applies the flash-based configuration approach to designs requiring live power-up operation, reprogrammability, and an ASIC-oriented development flow.

The APA075-TQ144I provides 75,000 gates across 3,072 cells and supports signals up to 180 MHz. Its 107 user I/Os provide substantial board-level connectivity for control logic, data acquisition, communications, and embedded system interfaces. The device uses CMOS technology and is offered in a surface-mount TQFP-144 package with a 0.5 mm pitch. These characteristics make it suitable for designs that need more deterministic hardware behavior than a microcontroller while retaining field programmability.

Architecturally, nonvolatile flash stores the FPGA configuration directly on the device. This removes the need for a configuration flash device or loader ROM for normal operation and allows the programmed logic to become active immediately after power-up. Reprogrammability also supports design revisions, field updates, and production simplification compared with a fully custom ASIC. The implementation must still satisfy the device's I/O, timing, power, and package constraints during design compilation and hardware validation.

Typical applications include industrial control and data acquisition, network interface controllers, communications equipment, embedded processors, test and measurement systems, and general-purpose logic consolidation. In each case, the APA075-TQ144I is useful when parallel interfaces, deterministic timing, flexible logic, and power-up-ready operation justify using a programmable FPGA rather than discrete logic or a conventional microcontroller.

A critical design consideration is package and pin planning. The device uses 144 pins with a 0.5 mm pitch, so the PCB should be designed with conservative lead geometry, adequate solder-mask spacing, and inspection access for fine-pitch assembly. Designers should use the Microchip pin-description table and the final compiler-generated constraint report when assigning package pins and checking timing.

This product record combines the verified APA075 family specifications with practical guidance for FPGA selection, pin-aware PCB implementation, lifecycle planning, and evaluation of genuine same-package alternatives. It is intended to help engineers distinguish an exact temperature and package option from related APA075 configurations before committing a 144-pin board design.

Drop-in-Alternativen für APA075-TQ144I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit APA075-TQ144I (gleiche Bauform und Footprint) – abweichend in Package, RoHS Status.

Microchip Technology
Package: 144-lead TQFP
RoHS Status: RoHS non-compliant
Vergleichen mit APA075-TQ144I →

APA075-TQG144I

✅ Drop-In
📦 TQFP-144 (20 x 20 mm)
Same 75,000 gates, 180 MHz frequency, 3,072 cells, 107 I/Os, and 144-pin TQFP format (0% difference in those listed values); ordering suffix differs.

📋 Referenzalternative (nicht im Katalog)

APA075-TQ144

✅ Drop-In
Microchip Technology
📦 TQFP-144 (20 x 20 mm)
ProASICPLUS flash field-programmable gate array · 75,000 gates · 3,072 cells · 107 I/O · 27,648 RAM bits · 180 MHz · CMOS · Nonvolatile flash

Preis auf Anfrage

Datenblatt ansehen →

APA075-TQG144

✅ Drop-In
📦 TQFP-144 (20 x 20 mm)
Same APA075 family and 144-pin TQFP footprint; documented gate, frequency, cell, and I/O ratings are not separately quantified for this suffix.

📋 Referenzalternative (nicht im Katalog)

APA075-FTQ144I

✅ Drop-In
📦 TQFP-144 (20 x 20 mm)
Same APA075 family and 144-pin TQFP footprint; suffix-specific speed and temperature differences are not separately quantified.

📋 Referenzalternative (nicht im Katalog)

APA075-FTQG144I

✅ Drop-In
📦 TQFP-144 (20 x 20 mm)
Same APA075 family and 144-pin TQFP footprint; suffix-specific speed and temperature differences are not separately quantified.

📋 Referenzalternative (nicht im Katalog)

APA075-TQ144I Grenzwerte & elektrische Eigenschaften

Product Type Field-Programmable Gate Array (FPGA)
FPGA Family ProASICPLUS APA075
Logic Gates 75,000 gates
Programmable Cells 3,072 cells
Maximum Operating Frequency 180 MHz
User I/O Count 107 I/Os
Configuration Memory Technology Nonvolatile flash
Process Technology CMOS
Gehäuse 144-pin TQFP, surface mount
Package Pin Count 144 pins
Package Pitch 0.5 mm
Package Body Size 20 x 20 mm
Power-Up Configuration Live at power-up
Reprogrammability Yes
RoHS-Status RoHS compliant

APA075-TQ144I 20 x 20 mm Pinbelegungsleitfaden

Pinbelegung für APA075-TQ144I (20 x 20 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für APA075-TQ144I im 20 x 20 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für APA075-TQ144I.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

APA075-TQ144I ist geeignet für 6 Anwendungs: Industrial Control Logic, Data Acquisition Systems, Network Interface Controller, Test and Measurement Equipment, Embedded Processor Subsystems, Communications Equipment.

🏭

Industrial Control Logic

The APA075-TQ144I fits industrial control systems that need deterministic parallel logic, numerous peripheral connections, and power-up-ready behavior. Its 75,000 gates and 3,072 programmable cells can consolidate sequencing, interlocks, counters, and machine-state logic, while 107 user I/Os provide connections to sensors, relay drivers, and operator interfaces. Nonvolatile flash configuration allows the programmed controller to become operational immediately at power-up without a separate configuration loader. The 180 MHz maximum frequency supports demanding control datapaths, although the design should be constrained using actual board and peripheral timing. The 144-pin TQFP package also requires careful PCB layout for its 0.5 mm lead pitch.

📊

Data Acquisition Systems

The APA075-TQ144I is suitable for parallel data-acquisition front ends that must coordinate multiple converters, counters, buffers, and digital signal processing. Its 107 user I/Os allow several converters and digital interfaces to share a common programmable controller, while the 3,072-cell array can implement sampling control and data-format conversion in hardware. The device's 180 MHz operating capability allows timing-critical sequencing to run in parallel rather than through a software loop. Flash-based configuration is useful when deterministic startup is required after power restoration. Engineers should match acquisition timing to external converter latency and use the manufacturer's pin table to assign banks and clock-capable pins without introducing signal-integrity problems.

🌐

Network Interface Controller

The APA075-TQ144I can implement deterministic network framing, protocol conversion, packet filtering, or host-interface logic in a programmable FPGA. Its 75,000 gates provide capacity for parallel datapaths and state machines, while 107 I/Os accommodate byte-wide buses, control signals, and multiple physical interfaces. The ProASICPLUS flash configuration preserves the network personality in nonvolatile memory and supports live power-up operation, which is useful in equipment that cannot wait for an external configuration sequence. The 180 MHz device speed supports demanding clock-domain logic. Clock planning, input synchronizers, and I/O voltage compatibility remain essential because the legacy family predates many current high-speed transceiver interfaces.

🖥️

Test and Measurement Equipment

The APA075-TQ144I fits instrumentation architectures that require flexible timing, pattern generation, acquisition control, and protocol handling. A single programmable device can coordinate stimulus generation, counters, trigger logic, and data capture around 107 user I/Os, reducing the need for separate programmable-logic devices. Its nonvolatile flash configuration allows the instrument to restore its measurement personality immediately at power-up, and its 180 MHz maximum operating frequency supports moderately high-rate digital test paths. The same-family alternatives permit sourcing and qualification options without changing the 144-pin TQFP board footprint. Final timing closure should include instrument clock jitter, external driver delay, and the propagation requirements of the selected 144-pin pin assignment.

🧩

Embedded Processor Subsystems

The APA075-TQ144I can surround an embedded processor with dedicated hardware for bus arbitration, timers, interrupts, data movement, and peripheral control. Its 3,072 programmable cells and 107 I/Os allow processor-side functions to be consolidated without placing every timing-critical operation in software. The nonvolatile flash configuration makes the subsystem operational at power-up, which can simplify boot sequencing for industrial or communications equipment. At up to 180 MHz, the FPGA can implement wide datapaths and parallel protocol engines alongside the processor. Engineers should use the final compiler constraints to partition clock domains, establish reset behavior, and verify that peripheral voltage levels are supported by the selected I/O assignments.

📡

Communications Equipment

The APA075-TQ144I is useful in communications equipment for line-interface control, framing, buffering, multiplexing, and supervisory logic. Its 75,000 gates can consolidate several fixed functions into one programmable device, while 107 user I/Os provide broad connectivity for parallel buses and control channels. Flash configuration supports field updates and retains the programmed function through power cycles, and live power-up behavior can shorten equipment startup sequences. The 180 MHz operating limit is suitable for many legacy parallel-interface designs but should be checked against modern serial transceiver timing. Layout must separate sensitive clock and data paths, provide controlled return paths, and account for the 0.5 mm pitch of the TQFP-144 package.

Zusammenfassung der empfohlenen Produkte

APA075-TQG144I Same-package APA075 control-logic alternative Verwendet in: Industrial Control Logic, Network Interface Controller, Communications Equipment APA075-TQ144 Microchip Technology Verwendet in: Industrial Control Logic, Data Acquisition Systems, Embedded Processor Subsystems APA075-FTQ144I Same-package APA075 alternative Verwendet in: Data Acquisition Systems, Embedded Processor Subsystems APA075-TQG144 Same-family network logic alternative Verwendet in: Network Interface Controller APA075-FTQG144I Same-package test-logic alternative Verwendet in: Test and Measurement Equipment, Communications Equipment APA075-TQ144I Microchip Technology Verwendet in: Test and Measurement Equipment
Where to buy APA075-TQ144I online?
The APA075-TQ144I can be requested through the Request a Quote form on this page. The form is the appropriate channel for current unit availability, minimum order quantity, lead time, and obsolete-part sourcing. Because this is a legacy ProASICPLUS FPGA, its lifecycle and inventory status should be confirmed before a new production commitment is approved.
What is the price of APA075-TQ144I?
Current commercial terms for the APA075-TQ144I should be obtained through the Request a Quote form on this page. The form lets the buyer request pricing for the exact 144-pin TQFP ordering code. Before requesting a quotation, confirm that the required system still supports the APA075 family and that the programmed FPGA design can be migrated if future supply becomes difficult.
What is the lead time for APA075-TQ144I?
The current lead time for APA075-TQ144I should be confirmed through the Request a Quote form on this page. Lead time depends on remaining factory or authorized-channel inventory, programmed configuration requirements, and shipment quantity. The manufacturer identifies APA075 as a ProASICPLUS family using nonvolatile flash, but the exact legacy-device lead time must be confirmed for this ordering code.
Is APA075-TQ144I in stock?
Stock for APA075-TQ144I should be verified through the Request a Quote form on this page. The device is a legacy ProASICPLUS FPGA and is not represented as a currently active general-purpose product. A quotation response should be used to confirm lot availability, date codes, traceability, and whether the exact TQ144I suffix is being offered.
What are the key specifications of APA075-TQ144I that engineers should know?
The APA075-TQ144I is a 75,000-gate, 3,072-cell flash FPGA with 107 user I/Os and a 180 MHz maximum operating frequency. According to the Microchip Technology APA075 family information, it uses nonvolatile flash configuration and supports live power-up operation. The device is packaged in a 144-pin TQFP with a 0.5 mm pitch and a 20 x 20 mm body.
Is APA075-TQ144I suitable for industrial control applications?
The APA075-TQ144I can suit industrial control logic when its electrical, timing, and temperature limits match the system requirements. Its 107 user I/Os support parallel sensors, actuators, counters, communications interfaces, and control logic, while nonvolatile flash allows programmed operation at power-up. The exact operating-temperature range and any AEC-Q100 status must be checked in the manufacturer documentation before qualification.
APA075-TQ144I vs APA075-TQG144I - which is better?
APA075-TQG144I is the closely related same-package option in the APA075 family and is the appropriate candidate to evaluate when the TQG suffix is approved for the application. The APA075-TQ144I and APA075-TQG144I are identified as package- and terminal-compatible replacements, with the same 75,000-gate, 180 MHz, 3,072-cell CMOS device description. Confirm the exact suffix meanings in the ordering guide.
What is the difference between APA075-TQ144I and APA075-TQ144?
APA075-TQ144 is a closely related non-I-suffix ordering option in the same APA075 and 144-pin TQFP family. The comparison identifies it as a replacement candidate with consistent terminals and package characteristics and the same 75,000-gate, 180 MHz, 3,072-cell CMOS description. The suffix difference should still be checked against temperature-grade and qualification requirements before substitution.
When should I choose APA075-TQ144I over APA075-TQG144I?
Choose APA075-TQ144I when the exact TQ144I ordering code is specified by an existing design or qualification record. Choose APA075-TQG144I when its suffix-specific commercial, environmental, or assembly requirements are preferable and the design is being formalized rather than copied. Both are same-family TQFP-144 candidates, but ordering-code semantics must be confirmed before a production change.
When should I choose APA075-TQ144I over APA075-FTQ144I?
Choose APA075-TQ144I when its ordering code is required for compatibility with an existing PCB, programmed device, or qualification package. APA075-FTQ144I is another same-family, same-package alternative found in the family cross-reference, but the exact speed, temperature, or ordering-code distinctions are not fully quantified. Review the manufacturer ordering information and device documents before deciding.
What can replace APA075-TQ144I?
APA075-TQG144I, APA075-TQ144, APA075-TQG144, APA075-FTQ144I, and APA075-FTQG144I are same-family TQFP-144 candidates associated with the APA075-TQ144I cross-reference. These options retain the 144-pin package format and are the most practical alternatives for footprint reuse. Each candidate still requires review of suffix-specific temperature, speed, qualification, and programming requirements.
What is the best drop-in replacement for APA075-TQ144I?
APA075-TQG144I is the closest documented same-package replacement candidate because it is explicitly compared as a complete replacement with consistent terminals and package characteristics. It remains within the APA075 family and is identified with the same 75,000-gate, 180 MHz, 3,072-cell CMOS configuration. Program compatibility and every device-specific rating must still be confirmed before using it as a drop-in part.
Where to download APA075-TQ144I datasheet PDF?
The APA075-TQ144I datasheet entry is available through the linked product documentation source, and the APA075 family product page provides the authoritative starting point for configuration, programming, and ordering information. Use the manufacturer's APA075 documentation for pin descriptions, electrical characteristics, timing, and package drawings. The linked Octopart datasheet route can also be used to locate the corresponding PDF document.
Where to find APA075-TQ144I pinout?
The APA075-TQ144I pinout must be taken from the package drawing and pin-description table in the Microchip Technology APA075 documentation. The device uses a 144-pin TQFP package with 0.5 mm pitch, so manually inferring connections is unsafe. Use the pin table together with the compiler-generated constraint report to verify every power, ground, configuration, clock, and user I/O assignment.
What is the ProASICPLUS architecture used by APA075-TQ144I?
The APA075-TQ144I uses the ProASICPLUS flash-programmable FPGA architecture, combining 3,072 programmable cells, 75,000 logic gates, 107 user I/Os, and nonvolatile configuration memory. According to the Microchip Technology APA075 family information, the device supports reprogrammability, live power-up operation, and an ASIC-oriented design flow while remaining in field-programmable logic.

Technische Referenzdaten für APA075-TQ144I – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose APA075-TQ144I when an existing design, qualification record, or programmed-device inventory explicitly identifies that ordering code. APA075-TQG144I is the strongest same-package alternative because it is documented as a complete replacement with consistent terminals and package characteristics. APA075-TQ144 and APA075-TQG144 are useful same-family options when their suffix-specific requirements are approved, while APA075-FTQ144I and APA075-FTQG144I provide additional APA075 sourcing candidates without changing the 144-pin TQFP footprint. For all five alternatives, verify temperature grade, speed grade, configuration compatibility, qualification status, and supply conditions. Because this is a legacy programmable-logic platform, consider migration to a currently supported FPGA family for new designs when long-term availability, software-tool support, or lifecycle assurance is more important than retaining an existing 144-pin board.

Vergleich mit Alternativen

Parameter Dieses Produkt APA075-TQG144I APA075-TQ144 APA075-TQG144 APA075-FTQ144I APA075-FTQG144I
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package TQFP-144 (20 x 20 mm) TQFP-144 (20 x 20 mm) TQFP-144 (20 x 20 mm) TQFP-144 (20 x 20 mm) TQFP-144 (20 x 20 mm) TQFP-144 (20 x 20 mm)

Wichtigste Unterscheidungsmerkmale

  • Exact TQ144I industrial-ordering option (vs. APA075-TQ144)
  • Directly documented same-package replacement candidate (vs. APA075-TQG144I)
  • Same-family sourcing flexibility without changing the board footprint (vs. APA075-FTQ144I)

Designhinweise

Design the PCB for a 144-pin TQFP with 0.5 mm lead pitch and a 20 x 20 mm body. Use the manufacturer package drawing for land geometry, and inspect the assembly process against that drawing before release. Keep sensitive clock and data routes away from power-supply switching nodes, provide continuous ground references where possible, and reserve programming or configuration-access circuitry on pins selected by the final compiler constraints.

Determine core and I/O supply requirements from the exact APA075 device documentation and the voltage levels driven by external logic. Decouple each supply domain at the package pins with the capacitance and ESR recommendations specified by Microchip Technology. Because this is a configurable CMOS FPGA, the actual power can vary with logic utilization and switching activity, so validate thermal performance using the final design rather than a nominal device estimate.

Apply the final compiler timing constraints rather than assuming that the advertised 180 MHz maximum applies to every board-level interface. Reserve clock-capable pins, constrain input and output timing, and account for package, board-trace, connector, and external-device delays. Synchronize asynchronous inputs and define reset-domain behavior explicitly; these steps are especially important when a legacy FPGA interfaces with newer logic families.

Do not substitute another APA075 suffix solely because it uses the same TQFP outline. Check the ordering guide for temperature grade, speed grade, package material, and qualification semantics. Also verify that the programming file, configuration scheme, security settings, and device identification are supported by the candidate part. A footprint-compatible device is not automatically a production-equivalent device.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The APA075-TQ144I comparison record identifies the device as RoHS compliant. Exact-part REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not available for confirmation.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

APA075 TQG100I APA075 PQG208I Actel APA075 APA075-TQ144I datasheet APA075-TQ144I pinout APA075-TQ144I specifications APA075-TQ144I equivalent APA075-TQ144I replacement APA075-TQ144I vs APA075-TQG144I APA075-TQ144I TQFP-144 footprint APA075-TQ144I price APA075-TQ144I stock Microchip Technology APA075-TQ144I APA075-TQ144I FPGA application circuit

Verwandte Bauteile & Begriffe

Microchip Technology Actel Corporation APA075-TQ144I APA075-TQG144I APA075-TQ144 APA075-TQG144 APA075-FTQ144I APA075-FTQG144I ProASICPLUS field-programmable gate array FPGA programmable logic nonvolatile flash ASIC CMOS TQFP-144 LQFP-144 QFP package family surface mount SMD 75,000 logic gates 3,072 programmable cells 107 user I/Os 180 MHz live power-up operation
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen