Microchip Technology

ATF22LV10C-10SU - 10ns 24V10 Flash PLD | Microchip

MPN: ATF22LV10C-10SU ✓ Aktif
3.0 V to 5.5 V Vdss 10 μA typical Id 24-pin SOIC Package 10 ns Speed Electrically erasable flash memory Memory
MOQ: 1 |

ATF22LV10C-10SU Ringkasan

Microchip ATF22LV10C-10SU is a high-performance CMOS simple programmable logic device with 10 macrocells, electrically erasable flash memory, and a 10 ns speed grade in a 24-pin SOIC package. The ATF22LV10C family supports operation across the 3.0 V to 5.5 V supply range and provides a user-controlled power-down mode with 10 μA typical standby power.

A simple programmable logic device, or SPLD, is a user-programmable semiconductor that combines AND-OR logic structures with configuration memory. An SPLD occupies the hierarchy above individual gates but below a field-programmable gate array. The ATF22LV10C provides 500 gates, 10 macrocells, and reusable nonvolatile flash configuration memory for compact control, decoding, interface, and state-machine implementations.

The device offers a 10 ns speed grade, 24 I/O pins, and a 3.0 V to 5.5 V operating range. Its optional pin-controlled power-down function lets the PD input place the device into a low-power state without removing configuration data from flash memory. This makes the ATF22LV10C useful in systems where a logic function must remain quickly available after power is restored.

The electrically erasable flash architecture supports in-circuit reprogramming, allowing a design to be updated without replacing the component. Flash retention removes the need for a separate configuration PROM, while the compact SOIC-24 package supports conventional surface-mount assembly. The combination of 500 gates and 10 macrocells is suitable for moderate-complexity combinational and sequential logic rather than large processor or FPGA workloads.

Typical uses include industrial control decoding, peripheral-interface logic, keypad and display controllers, instrumentation signal conditioning, power-sequencing helpers, and embedded system glue logic. A 3.3 V system can use the device directly within its specified supply range, while 5 V designs can also use the same family when timing and temperature requirements are met.

When laying out a board, place the decoupling capacitor close to the power pin and route the configuration, clock, and I/O signals away from noisy switching nodes. Confirm the package pin assignment, programming voltage, timing margin, and power-down polarity against the manufacturer datasheet before releasing a PCB.

This page combines the ATF22LV10C family architecture, verified package and speed information, practical replacement guidance, and design-oriented comparison points to support component selection and implementation.

Alternatif penggantian untuk ATF22LV10C-10SU — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ATF22LV10C-10SU (sama faktor bentuk dan footprint) — berbeda di dalam Package, Speed Grade, Device Type, Logic Family, Nominal Supply Voltage.

Microchip Technology
Package: 24-pin plastic SOIC
Speed Grade: 25 ns
Device Type: 22V10 Simple Programmable Logic Device
Bandingkan dengan ATF22LV10C-10SU →
Microchip Technology
Package: 24-SOIC
Speed Grade: 15 ns
Device Type: 22V10 electrically erasable CMOS programmable logic device
Bandingkan dengan ATF22LV10C-10SU →

ATF22LV10C-10SI

✅ Drop-In
📦 24-SOIC
Same 10 ns speed grade and 24-SOIC footprint; the SI suffix selects a different qualification or temperature option than SU

📋 Alternatif referensi (tidak dalam katalog)

ATF22LV10C-10SC

✅ Drop-In
📦 24-SOIC
Same 10 ns family timing and 24-SOIC package; SC suffix changes the commercial or temperature ordering option

📋 Alternatif referensi (tidak dalam katalog)

ATF22LV10C-15SU

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 24-SOIC
Same 24-SOIC footprint and family architecture, but the speed grade changes from 10 ns to 15 ns, a 50% slower grade

📋 Alternatif referensi (tidak dalam katalog)

ATF22LV10C-20SU

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 24-SOIC
Same 24-SOIC footprint and family architecture, but the speed grade changes from 10 ns to 20 ns, a 100% slower grade

📋 Alternatif referensi (tidak dalam katalog)

ATF22LV10C-25SU

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 24-SOIC
Same 24-SOIC footprint and family architecture, but the speed grade changes from 10 ns to 25 ns, a 150% slower grade

📋 Alternatif referensi (tidak dalam katalog)

ATF22LV10C-10SU Rating Maksimal & Karakteristik Listrik

Product Type Simple programmable logic device (SPLD)
Programmable Logic Type Electrically erasable flash-programmable logic
Number of Macrocells 10 macrocells
Gate Count 500 gates
Speed Grade 10 ns
Supply Voltage Range 3.0 V to 5.5 V
Power-Down Standby Current 10 μA typical
Number of I/O Pins 24 pins
Paket 24-pin SOIC
Technology CMOS
Configuration Memory Electrically erasable flash memory
Power-Down Control Optional user-controlled PD pin
Tipe Mounting Surface mount

ATF22LV10C-10SU 24-pin soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk ATF22LV10C-10SU (24-pin soic pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 24-pin soic untuk ATF22LV10C-10SU

Tidak ada data diatribut pin yang tersedia untuk ATF22LV10C-10SU.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ATF22LV10C-10SU cocok untuk 6 aplikasis: Industrial Control and Signal Decoding, Peripheral Interface and Glue Logic, Power-Sequencing and Control Helper, Instrumentation Signal Conditioning, Keypad, Display, and Human-Interface Control, Low-Power Embedded Subsystem.

🏭

Industrial Control and Signal Decoding

The ATF22LV10C-10SU is suitable for compact industrial control logic that decodes switches, status flags, interlocks, or discrete sensor inputs. Its 10 macrocells and 500 gates provide enough capacity for multiple combinational and registered functions, while the 10 ns grade preserves timing margin in control paths. The 3.0 V to 5.5 V range supports both 3.3 V and 5 V controller boards. Use nonvolatile flash configuration so operating logic can be revised during production or field update. Designers should confirm input thresholds and timing at the selected supply voltage before fixing the implementation.

🔧

Peripheral Interface and Glue Logic

ATF22LV10C-10SU can consolidate protocol formatting, address decoding, interrupt handling, and miscellaneous control logic between larger digital components. Ten macrocells are most effective when the design is partitioned into parallel decode and registered state functions rather than one large sequential block. The 10 ns speed grade helps maintain margin in short combinational paths, while flash memory retains the interface definition across power cycles. The 24-SOIC footprint also permits reuse of logic-dense boards that previously used a PAL or GAL implementation, provided pin functions and programming requirements are verified.

⚡

Power-Sequencing and Control Helper

The ATF22LV10C-10SU can implement deterministic power-enable sequencing, delay generation, reset combination, and fault-latching logic around power-management circuitry. Its optional PD input allows an inactive logic section to enter a 10 μA typical standby state while retaining its flash configuration. This is useful when a small fixed control function must return quickly after power restoration. The 10 ns speed grade supports short timing paths, but the power-down behavior and output states must be validated against every possible supply transition. Use the manufacturer's power-down and timing information for the final safety analysis.

📟

Instrumentation Signal Conditioning

For instrumentation and test equipment, the ATF22LV10C-10SU can implement front-panel decoding, range selection, alarm logic, status multiplexing, and small state machines. The 24 available I/O pins allow control functions to coexist with data-path signals, while the 500-gate architecture provides useful density without moving to a larger FPGA. Its 10 ns timing supports common control intervals, and the 3.0 V to 5.5 V range accommodates mixed legacy and modern interface levels. Analog isolation remains the responsibility of separate front-end components; the PLD should only process compatible digital control signals.

🖥️

Keypad, Display, and Human-Interface Control

ATF22LV10C-10SU can decode keypad matrices, multiplex display indications, debounce digital inputs, and generate control strobes for human-interface systems. Its 10 macrocells make it most effective when several independent small functions share the same device. The 10 ns grade allows direct timing checks for switch scanning and display update intervals, while flash configuration supports product variants without external configuration memory. Designers should avoid exceeding the device's specified I/O current and should follow the manufacturer's recommended termination or pull arrangements for unused inputs.

🧩

Low-Power Embedded Subsystem

The ATF22LV10C-10SU fits a low-power embedded subsystem that requires a small amount of always-defined logic without continuously powering a larger programmable device. Its user-controlled power-down feature provides 10 μA typical standby current, and the flash configuration remains available when the logic is re-enabled. The 10 ns speed class allows rapid recovery for interrupt qualification or wake-up sequencing. A robust design should specify valid logic states during power-down, account for supply ramp time, and verify that all externally connected inputs remain within their permitted voltage range.

Ringkasan Produk Direkomendasikan

ATF22LV10C-10SI Same-family industrial-ordering alternative Digunakan di dalam: Industrial Control and Signal Decoding, Peripheral Interface and Glue Logic, Instrumentation Signal Conditioning, Low-Power Embedded Subsystem ATF22LV10C-10SC Same-family commercial-ordering alternative Digunakan di dalam: Industrial Control and Signal Decoding, Power-Sequencing and Control Helper, Keypad, Display, and Human-Interface Control ATF22LV10C-15SU Same-footprint alternative for relaxed timing Digunakan di dalam: Peripheral Interface and Glue Logic, Keypad, Display, and Human-Interface Control ATF22LV10C-25SU Same-footprint option for lower-speed logic Digunakan di dalam: Power-Sequencing and Control Helper, Low-Power Embedded Subsystem ATF22LV10C-20SU Same-footprint lower-speed family option Digunakan di dalam: Instrumentation Signal Conditioning
What is the ATF22LV10C-10SU?
The ATF22LV10C-10SU is a 10 ns, 24-pin simple programmable logic device from Microchip Technology with 10 macrocells, 500 gates, and electrically erasable flash configuration memory. According to the Microchip product page, the ATF22LV10C family operates across a 3.0 V to 5.5 V supply range and uses CMOS technology. The suffix identifies the 10 ns speed grade, while the package is specified as 24-SOIC.
Where can I download the ATF22LV10C-10SU datasheet PDF?
The ATF22LV10C-10SU datasheet PDF is available from the official Microchip document page at https://www.microchip.com/content/dam/mchp/documents/OTH/ProductDocuments/DataSheets/doc0780.pdf. The document is titled ATF22LV10C - Complete Datasheet and contains the family architecture, electrical characteristics, package information, programming details, and pin descriptions. Use this manufacturer document when assigning PCB signals or calculating timing margins.
What are the key specifications of ATF22LV10C-10SU?
The ATF22LV10C-10SU combines a 10 ns speed grade with 10 macrocells, 500 gates, 24 I/O pins, and flash-programmable configuration memory in a 24-SOIC package. According to the Microchip product page and manufacturer datasheet, its supported supply-voltage range is 3.0 V to 5.5 V. It also provides optional user-controlled power-down with 10 μA typical standby current.
What supply voltage does ATF22LV10C-10SU operate at?
The ATF22LV10C-10SU operates across a 3.0 V to 5.5 V supply-voltage range. The Microchip product page states that the speed ranges of the ATF22LV10C family are specified over this range for industrial and commercial temperature options. Consequently, the device can support both 3.3 V and 5 V systems, provided the selected speed and temperature grade meet the system requirements.
How much power does ATF22LV10C-10SU consume in power-down mode?
The ATF22LV10C-10SU has a typical power-down standby current of 10 μA. According to the Microchip manufacturer datasheet, the optional power-down feature is controlled by the PD pin on the DIP and SOIC packages. This low-current state allows the configured logic to remain stored in flash while reducing system power consumption when the associated circuit is inactive.
What is the ATF22LV10C-10SU pinout?
The ATF22LV10C-10SU uses a 24-pin SOIC package, and the official manufacturer datasheet contains the complete pin-description table and package drawing. The verified data identifies pin 4 as the PD input on DIP and SOIC versions. Use the pin-description table in the ATF22LV10C - Complete Datasheet when assigning power, ground, clock, input, output, and configurable I/O tracks.
Can ATF22LV10C-10SU be programmed more than once?
Yes, the ATF22LV10C-10SU can be reprogrammed because its configuration is stored in electrically erasable flash memory. The Microchip product page identifies flash memory as the basis of the device's configuration technology. Repeated programming allows logic revisions, test patterns, and field updates without replacing the IC, subject to the programming procedure and endurance limits in the manufacturer datasheet.
What can replace the ATF22LV10C-10SU?
The closest documented drop-in choices are the ATF22LV10C-10SI and ATF22LV10C-10SC in the same 24-pin SOIC family, with the ATF22LV10C-10SI identified in a direct comparison with the target. Slower same-family 10 ns-class variants can also share the footprint, but only a 10 ns grade preserves the target's timing class. Confirm temperature grade, power-down polarity, and programming details before substitution.
Is the ATF22LV10C-10SU the same as ATF22LV10C-10SI?
The ATF22LV10C-10SU and ATF22LV10C-10SI are closely related 10 ns ATF22LV10C devices in the 24-SOIC package, but their suffix codes must be checked for temperature and commercial-versus-industrial distinctions. A direct comparison identifies both as 10 ns, 24-SOIC members of the same SPLD family. Confirm the exact suffix meanings and qualification requirements before treating one as a drop-in replacement.
When should I choose ATF22LV10C-10SU over ATF22LV10C-10SI?
Choose the ATF22LV10C-10SU when a design specifically calls for that ordering code and its documented temperature, lifecycle, and sourcing requirements. Choose the ATF22LV10C-10SI when its qualification and temperature grade better match the product and its 10 ns timing and 24-SOIC footprint are unchanged. The suffix-controlled characteristics must be verified in the Microchip ordering information before the PCB design is released.
Is ATF22LV10C-10SU suitable for low-power embedded control?
The ATF22LV10C-10SU is suitable for low-power embedded control when its configuration logic remains useful during standby. The manufacturer specifies a user-controlled power-down mode with 10 μA typical standby current, while flash memory retains the programmed logic. This combination supports power-gated subsystems that require rapid restoration of a small fixed logic function without a separate configuration PROM.
Where can I buy ATF22LV10C-10SU and check its lead time?
Use the Request a Quote form on this page to ask about ATF22LV10C-10SU availability, current lead time, order quantity, and delivery options. The listing identifies the exact 24-SOIC ordering code, but current commercial conditions can change independently of the product specifications. A quotation request allows the current package, quantity, and lifecycle position to be confirmed before an order is placed.
What is the price of ATF22LV10C-10SU?
Current ATF22LV10C-10SU pricing is handled through the Request a Quote form on this page rather than a static price statement. Market conditions, quantity, packaging requirements, and component availability can change the commercial terms. Submit the required part number, quantity, and target delivery information so the current quotation can be prepared for the exact 24-SOIC device.
Is ATF22LV10C-10SU in stock?
Current ATF22LV10C-10SU stock should be confirmed through the Request a Quote form on this page. The device is presented as an active Microchip Technology product, but available inventory for the exact 10 ns, 24-SOIC ordering code can vary by quantity. Provide the required quantity and schedule when requesting a quotation so current supply can be checked.
ATF22LV10C-10SU versus a GAL22V10, which is better for modern designs?
The ATF22LV10C-10SU is generally better for a new nonvolatile design because it uses electrically erasable flash configuration memory and provides a documented 10 ns speed grade with a user-controlled power-down mode. A GAL22V10 may be appropriate only when an existing board, compatible fuse technology, and exact timing requirements dominate the decision. Their architecture and programming procedures are not interchangeable without detailed verification.
How should ATF22LV10C-10SU be used in a 3.3 V design?
The ATF22LV10C-10SU can be used in a 3.3 V design because the Microchip product page specifies a 3.0 V to 5.5 V operating range. Place the required supply-decoupling capacitor close to the device power pin, and verify the selected speed grade and temperature option against the system timing requirements. Use the manufacturer package pinout and electrical-characteristics table for the final connection and layout.

Data referensi engineering untuk ATF22LV10C-10SU — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose ATF22LV10C-10SU when the design needs the exact 10 ns, 24-SOIC ordering code and supports its suffix-defined temperature and qualification requirements. Select ATF22LV10C-10SI or ATF22LV10C-10SC when their corresponding industrial or commercial option better fits the product, provided the exact suffix characteristics have been checked. Slower ATF22LV10C-15SU, ATF22LV10C-20SU, and ATF22LV10C-25SU members retain the same package and macrocell architecture, making them potential board-reuse choices when timing margin is sufficient. Do not select a slower grade merely to avoid price or availability constraints without recalculating the critical path. No cross-brand equivalent was established with verified pin-level and parametric information, so the recommended replacements remain within the Microchip ATF22LV10C family.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ATF22LV10C-10SI ATF22LV10C-10SC ATF22LV10C-15SU ATF22LV10C-20SU ATF22LV10C-25SU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 24-SOIC 24-SOIC - same 24-SOIC - same 24-SOIC - same 24-SOIC - same 24-SOIC - same
Device Type Flash SPLD Flash SPLD Flash SPLD Flash SPLD Flash SPLD Flash SPLD
Number of Macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Gate Count 500 gates 500 gates 500 gates 500 gates 500 gates 500 gates
Speed Grade 10 ns 10 ns - same speed grade 10 ns - same speed grade 15 ns - 50% slower 20 ns - 100% slower 25 ns - 150% slower
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Power-Down Standby Current 10 μA typical 10 μA typical 10 μA typical 10 μA typical 10 μA typical 10 μA typical
Number of Pins 24 pins 24 pins 24 pins 24 pins 24 pins 24 pins
Configuration Memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory

Diferensiator Kunci

  • Maintains the target's fastest documented speed grade (vsATF22LV10C-15SU)
  • Provides more timing margin than slower same-footprint options (vsATF22LV10C-25SU)
  • Combines 10 macrocells with reusable flash configuration (vsATF22LV10C-10SC)

Catatan Desain

Place the supply-decoupling capacitor immediately across the ATF22LV10C-10SU power and ground pins, with the shortest possible loop and direct return to the device ground. Select the capacitor type and ESR using the manufacturer's power-supply recommendations. Check the PD input state during startup and shutdown so no undefined control condition activates an unwanted power-down or output transition.

Route clock, PD, programming, and other timing-sensitive nets away from switching nodes and high-current return paths. Keep the 24-SOIC footprint free of unintended copper keepouts or assembly dams that could interfere with pin-one orientation. Because the device supports 3.3 V and 5 V operation, confirm signal thresholds for every connected peripheral rather than relying on a common voltage assumption.

Do not treat the -10SU, -10SI, and -10SC ordering codes as identical without checking their suffix-defined temperature and qualification requirements. A slower 15 ns, 20 ns, or 25 ns family member can share the package while failing an existing timing budget. Also verify power-down polarity and output behavior, because configuration retention does not imply that outputs remain in a particular state while the device is powered down.

Use the manufacturer's input transition-time and output loading limits when connecting long traces, slow optocouplers, or lightly loaded bus signals. Avoid relying on an undefined input to settle if the PCB exposes a pin as an I/O or control input during programming. For systems that repeatedly enter and leave power-down, validate the PD network and every connected output with realistic supply ramps and worst-case loading.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No explicit environmental or automotive compliance statement was identified for the exact ordering code.

Data disahkan pada: 2026-11-11 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

ATF22LV10C-10SU datasheet ATF22LV10C-10SU pinout ATF22LV10C-10SU datasheet pdf ATF22LV10C-10SU equivalent ATF22LV10C-10SU replacement ATF22LV10C-10SU price ATF22LV10C-10SU stock ATF22LV10C-10SU vs ATF22LV10C-10SI ATF22LV10C 10ns 24-SOIC Microchip ATF22LV10C-10SU ATF22LV10C flash SPLD ATF22LV10C power-down application

Komponen dan Istilah Terkait

Microchip Technology ATF22LV10C-10SU ATF22LV10C-10SI ATF22LV10C-10SC ATF22LV10C-15SU ATF22LV10C-20SU ATF22LV10C-25SU Simple programmable logic device SPLD Electrically erasable flash memory CMOS Programmable logic device Logic IC Semiconductor 24-SOIC SOIC family Surface mount SMD 10 macrocells 500 gates 10 ns speed grade Power-down control PD pin Industrial control logic Peripheral interface logic
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ