ATF22LV10C-10SU - 10ns 24V10 Flash PLD | Microchip
料号: ATF22LV10C-10SU ✓ 量产中ATF22LV10C-10SU 概述
A simple programmable logic device, or SPLD, is a user-programmable semiconductor that combines AND-OR logic structures with configuration memory. An SPLD occupies the hierarchy above individual gates but below a field-programmable gate array. The ATF22LV10C provides 500 gates, 10 macrocells, and reusable nonvolatile flash configuration memory for compact control, decoding, interface, and state-machine implementations.
The device offers a 10 ns speed grade, 24 I/O pins, and a 3.0 V to 5.5 V operating range. Its optional pin-controlled power-down function lets the PD input place the device into a low-power state without removing configuration data from flash memory. This makes the ATF22LV10C useful in systems where a logic function must remain quickly available after power is restored.
The electrically erasable flash architecture supports in-circuit reprogramming, allowing a design to be updated without replacing the component. Flash retention removes the need for a separate configuration PROM, while the compact SOIC-24 package supports conventional surface-mount assembly. The combination of 500 gates and 10 macrocells is suitable for moderate-complexity combinational and sequential logic rather than large processor or FPGA workloads.
Typical uses include industrial control decoding, peripheral-interface logic, keypad and display controllers, instrumentation signal conditioning, power-sequencing helpers, and embedded system glue logic. A 3.3 V system can use the device directly within its specified supply range, while 5 V designs can also use the same family when timing and temperature requirements are met.
When laying out a board, place the decoupling capacitor close to the power pin and route the configuration, clock, and I/O signals away from noisy switching nodes. Confirm the package pin assignment, programming voltage, timing margin, and power-down polarity against the manufacturer datasheet before releasing a PCB.
This page combines the ATF22LV10C family architecture, verified package and speed information, practical replacement guidance, and design-oriented comparison points to support component selection and implementation.
直接替换替代料: ATF22LV10C-10SU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ATF22LV10C-10SU (相同外形与封装尺寸) ——差异在于 Package, Speed Grade, Device Type, Logic Family, Nominal Supply Voltage.
ATF22LV10C-10SI
✅ 直接替换📋 参考替代料(不在目录中)
ATF22LV10C-10SC
✅ 直接替换📋 参考替代料(不在目录中)
ATF22LV10C-15SU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
ATF22LV10C-20SU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
ATF22LV10C-25SU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
ATF22LV10C-10SU 最大额定值与电气特性
| Product Type | Simple programmable logic device (SPLD) |
| Programmable Logic Type | Electrically erasable flash-programmable logic |
| Number of Macrocells | 10 macrocells |
| Gate Count | 500 gates |
| Speed Grade | 10 ns |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Power-Down Standby Current | 10 μA typical |
| Number of I/O Pins | 24 pins |
| 封装 | 24-pin SOIC |
| Technology | CMOS |
| Configuration Memory | Electrically erasable flash memory |
| Power-Down Control | Optional user-controlled PD pin |
| 安装类型 | Surface mount |
ATF22LV10C-10SU 24-pin soic 引脚配置指南
ATF22LV10C-10SU(24-pin soic 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATF22LV10C-10SU.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATF22LV10C-10SU 适用于 6 应用s: Industrial Control and Signal Decoding, Peripheral Interface and Glue Logic, Power-Sequencing and Control Helper, Instrumentation Signal Conditioning, Keypad, Display, and Human-Interface Control, Low-Power Embedded Subsystem.
Industrial Control and Signal Decoding
The ATF22LV10C-10SU is suitable for compact industrial control logic that decodes switches, status flags, interlocks, or discrete sensor inputs. Its 10 macrocells and 500 gates provide enough capacity for multiple combinational and registered functions, while the 10 ns grade preserves timing margin in control paths. The 3.0 V to 5.5 V range supports both 3.3 V and 5 V controller boards. Use nonvolatile flash configuration so operating logic can be revised during production or field update. Designers should confirm input thresholds and timing at the selected supply voltage before fixing the implementation.
推荐
Peripheral Interface and Glue Logic
ATF22LV10C-10SU can consolidate protocol formatting, address decoding, interrupt handling, and miscellaneous control logic between larger digital components. Ten macrocells are most effective when the design is partitioned into parallel decode and registered state functions rather than one large sequential block. The 10 ns speed grade helps maintain margin in short combinational paths, while flash memory retains the interface definition across power cycles. The 24-SOIC footprint also permits reuse of logic-dense boards that previously used a PAL or GAL implementation, provided pin functions and programming requirements are verified.
推荐
Power-Sequencing and Control Helper
The ATF22LV10C-10SU can implement deterministic power-enable sequencing, delay generation, reset combination, and fault-latching logic around power-management circuitry. Its optional PD input allows an inactive logic section to enter a 10 μA typical standby state while retaining its flash configuration. This is useful when a small fixed control function must return quickly after power restoration. The 10 ns speed grade supports short timing paths, but the power-down behavior and output states must be validated against every possible supply transition. Use the manufacturer's power-down and timing information for the final safety analysis.
推荐
Instrumentation Signal Conditioning
For instrumentation and test equipment, the ATF22LV10C-10SU can implement front-panel decoding, range selection, alarm logic, status multiplexing, and small state machines. The 24 available I/O pins allow control functions to coexist with data-path signals, while the 500-gate architecture provides useful density without moving to a larger FPGA. Its 10 ns timing supports common control intervals, and the 3.0 V to 5.5 V range accommodates mixed legacy and modern interface levels. Analog isolation remains the responsibility of separate front-end components; the PLD should only process compatible digital control signals.
推荐
Keypad, Display, and Human-Interface Control
ATF22LV10C-10SU can decode keypad matrices, multiplex display indications, debounce digital inputs, and generate control strobes for human-interface systems. Its 10 macrocells make it most effective when several independent small functions share the same device. The 10 ns grade allows direct timing checks for switch scanning and display update intervals, while flash configuration supports product variants without external configuration memory. Designers should avoid exceeding the device's specified I/O current and should follow the manufacturer's recommended termination or pull arrangements for unused inputs.
推荐
Low-Power Embedded Subsystem
The ATF22LV10C-10SU fits a low-power embedded subsystem that requires a small amount of always-defined logic without continuously powering a larger programmable device. Its user-controlled power-down feature provides 10 μA typical standby current, and the flash configuration remains available when the logic is re-enabled. The 10 ns speed class allows rapid recovery for interrupt qualification or wake-up sequencing. A robust design should specify valid logic states during power-down, account for supply ramp time, and verify that all externally connected inputs remain within their permitted voltage range.
推荐
推荐产品汇总
工程参考数据: ATF22LV10C-10SU ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATF22LV10C-10SI | ATF22LV10C-10SC | ATF22LV10C-15SU | ATF22LV10C-20SU | ATF22LV10C-25SU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-SOIC | 24-SOIC - same | 24-SOIC - same | 24-SOIC - same | 24-SOIC - same | 24-SOIC - same |
| Device Type | Flash SPLD | Flash SPLD | Flash SPLD | Flash SPLD | Flash SPLD | Flash SPLD |
| Number of Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Gate Count | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Speed Grade | 10 ns | 10 ns - same speed grade | 10 ns - same speed grade | 15 ns - 50% slower | 20 ns - 100% slower | 25 ns - 150% slower |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Power-Down Standby Current | 10 μA typical | 10 μA typical | 10 μA typical | 10 μA typical | 10 μA typical | 10 μA typical |
| Number of Pins | 24 pins | 24 pins | 24 pins | 24 pins | 24 pins | 24 pins |
| Configuration Memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory |
关键差异点
- Maintains the target's fastest documented speed grade (对比 ATF22LV10C-15SU)
- Provides more timing margin than slower same-footprint options (对比 ATF22LV10C-25SU)
- Combines 10 macrocells with reusable flash configuration (对比 ATF22LV10C-10SC)
设计说明
Place the supply-decoupling capacitor immediately across the ATF22LV10C-10SU power and ground pins, with the shortest possible loop and direct return to the device ground. Select the capacitor type and ESR using the manufacturer's power-supply recommendations. Check the PD input state during startup and shutdown so no undefined control condition activates an unwanted power-down or output transition.
Route clock, PD, programming, and other timing-sensitive nets away from switching nodes and high-current return paths. Keep the 24-SOIC footprint free of unintended copper keepouts or assembly dams that could interfere with pin-one orientation. Because the device supports 3.3 V and 5 V operation, confirm signal thresholds for every connected peripheral rather than relying on a common voltage assumption.
Do not treat the -10SU, -10SI, and -10SC ordering codes as identical without checking their suffix-defined temperature and qualification requirements. A slower 15 ns, 20 ns, or 25 ns family member can share the package while failing an existing timing budget. Also verify power-down polarity and output behavior, because configuration retention does not imply that outputs remain in a particular state while the device is powered down.
Use the manufacturer's input transition-time and output loading limits when connecting long traces, slow optocouplers, or lightly loaded bus signals. Avoid relying on an undefined input to settle if the PCB exposes a pin as an I/O or control input during programming. For systems that repeatedly enter and leave power-down, validate the PD network and every connected output with realistic supply ramps and worst-case loading.
合规信息
No explicit environmental or automotive compliance statement was identified for the exact ordering code.