ATMEGA48V-10MI - 4KB Flash 1.8V AVR MCU QFN-32 | Microchip
MPN: ATMEGA48V-10MI ✓ AktifATMEGA48V-10MI Ringkasan
An 8-bit AVR microcontroller is a Harvard-architecture processor that executes most of its 131 powerful instructions in a single clock cycle. Within the power-management hierarchy, microcontrollers sit at the system-control layer, integrating CPU, program memory, data memory, timers, analog conversion, and serial interfaces into a single IC, reducing board complexity versus discrete MCU-plus-logic solutions.
Key features include the advanced RISC core with 32 general-purpose 8-bit working registers, three flexible timer/counters with compare modes and PWM, byte-oriented Two-Wire Interface (I2C), USART serial port, and SPI. The low-voltage V-variant operates down to 1.8V, making it well suited to battery-powered designs where a 5V rail is not available.
Technical depth: the device features debugWIRE on-chip debugging over the RESET pin, a 10-bit successive-approximation ADC with internal 1.1V bandgap reference option, and self-programming Flash enabling field updates. The picoPower-class sleep modes (idle, ADC noise reduction, power-save, power-down) achieve low standby consumption.
Typical applications include battery-powered sensor nodes, industrial control and metering, small appliance and consumer product control boards, and lighting control - anywhere 4KB of code, low voltage, and a compact 5x5 mm QFN footprint suffice.
Design consideration: reserve PC6/RESET and the Two-Wire/SPI pins early; programming uses SPI (ISP) on PB3-PB5, which must remain accessible on the PCB for factory programming and debugWIRE.
This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatif penggantian untuk ATMEGA48V-10MI — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ATMEGA48V-10MI (sama faktor bentuk dan footprint) — berbeda di dalam Package, Flash Memory, Operating Temperature, ADC, Serial Interfaces.
ATMEGA48V-10MU
✅ Drop-InKontak untuk harga
Lihat Datasheet →ATMEGA48PV-10MUR
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ATMEGA48PV-10MMU
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ATMEGA48PA-MUR
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ATMEGA48-20MI
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ATMEGA48P-20MMU
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ATMEGA48V-10MI Rating Maksimal & Karakteristik Listrik
| Core Architecture | 8-bit AVR RISC |
| Flash Program Memory | 4 KB In-System Programmable |
| SRAM | 512 B |
| EEPROM | 256 B |
| Maximum CPU Speed | 10 MHz (up to 10 MIPS) |
| Supply Voltage Range | 1.8 V to 5.5 V |
| ADC | 8-channel 10-bit |
| GPIO Count | 23 I/O lines |
| Timers | 3 flexible timer/counters |
| Serial Interfaces | USART, SPI, Two-Wire Interface (I2C) |
| On-Chip Debug | debugWIRE |
| Suhu Kerja | -40C to +85C (industrial) |
| Paket | 32-VFQFN Exposed Pad (MLF) 5x5 mm |
| Tipe Mounting | Surface Mount |
| Series | AVR ATmega48 |
Konfigurasi Pin ATMEGA48V-10MI
| Pin produk 1 | PD3 — Port D bit 3 / digital I/O |
| Pin produk 2 | PD4 — Port D bit 4 / digital I/O |
| Pin produk 3 | GND — Ground |
| Pin produk 4 | VCC — Digital supply voltage |
| Pin produk 5 | GND — Ground |
| Pin produk 6 | VCC — Digital supply voltage |
| Pin produk 7 | PB6 — Port B bit 6 / XTAL1 / TOSC1 |
| Pin produk 8 | PB7 — Port B bit 7 / XTAL2 / TOSC2 |
| Pin produk 9 | PD5 — Port D bit 5 / digital I/O |
| Pin produk 10 | PD6 — Port D bit 6 / digital I/O |
| Pin produk 11 | PD7 — Port D bit 7 / digital I/O |
| Pin produk 12 | PB0 — Port B bit 0 / digital I/O |
| Pin produk 13 | PB1 — Port B bit 1 / digital I/O |
| Pin produk 14 | PB2 — Port B bit 2 / digital I/O |
| Pin produk 15 | PB3 — Port B bit 3 / MOSI (SPI) / OC2A |
| Pin produk 16 | PB4 — Port B bit 4 / MISO (SPI) |
| Pin produk 17 | PB5 — Port B bit 5 / SCK (SPI) |
| Pin produk 18 | AVCC — ADC supply voltage |
| Pin produk 19 | ADC6 — ADC input channel 6 |
| Pin produk 20 | AREF — ADC analog reference |
| Pin produk 21 | GND — Ground |
| Pin produk 22 | ADC7 — ADC input channel 7 |
| Pin produk 23 | PC0 — Port C bit 0 / ADC channel 8 |
| Pin produk 24 | PC1 — Port C bit 1 / ADC channel 9 |
| Pin produk 25 | PC2 — Port C bit 2 / ADC channel 10 |
| Pin produk 26 | PC3 — Port C bit 3 / ADC channel 11 |
| Pin produk 27 | PC4 — Port C bit 4 / ADC channel 12 / SDA (TWI) |
| Pin produk 28 | PC5 — Port C bit 5 / ADC channel 13 / SCL (TWI) |
| Pin produk 29 | PC6 — RESET / debugWIRE pin |
| Pin produk 30 | PD0 — Port D bit 0 / RXD (USART) |
| Pin produk 31 | PD1 — Port D bit 1 / TXD (USART) |
| Pin produk 32 | PD2 — Port D bit 2 / digital I/O (INT0) |
Aplikasi Umum
ATMEGA48V-10MI cocok untuk 6 aplikasis: Battery-Powered Sensor Nodes, Industrial Control and Metering, Small Appliance and Consumer Control Boards, Lighting Control, Portable Measurement Instruments, Remote Control and Radio Accessories.
Battery-Powered Sensor Nodes
The ATMEGA48V-10MI fits battery-powered sensor nodes because its 1.8V to 5.5V supply range covers single-cell lithium and multi-cell alkaline chemistries without a boost converter, and its power-down sleep mode minimizes standby drain between measurement cycles. The integrated 8-channel 10-bit ADC with an internal 1.1V bandgap reference digitizes thermistors, potentiometers, and light sensors directly, while the Two-Wire Interface connects digital sensors and the USART links a radio module. In a typical node, the MCU sleeps in power-down with a watchdog wake interval, reads a sensor through the ADC or TWI, transmits via UART, and returns to sleep; the 10MHz ceiling is more than sufficient since most of the duty cycle is spent asleep, and running at lower clocks and voltages further reduces energy per operation.
Direkomendasikan
Industrial Control and Metering
In industrial control panels and sub-metering boards, the ATMEGA48V-10MI provides the industrial -40C to +85C temperature rating required for factory-floor enclosures, plus 23 GPIO lines to drive relays, optocouplers, and indicator LEDs. The three flexible timer/counters generate PWM outputs for heater and motor control, the 10-bit ADC samples current and voltage sense channels, and the USART connects to RS-485 transceivers for Modbus-style field communication. The 4KB self-programming Flash supports field firmware updates over the existing serial link without tooling access. Using the V-variant allows one firmware image and one PCB to be reused across 3.3V logic, 5V, and battery-backed installations, since the same die operates across the entire 1.8V to 5.5V range at 10MHz.
Direkomendasikan
Small Appliance and Consumer Control Boards
The ATMEGA48V-10MI is a cost-effective controller for small appliances, fans, coffee machines, and chargers where 4KB of code covers state machines, button debouncing, and thermal limits. Its 5x5 mm 32-pad VFQFN exposed-pad package saves board area on cost-driven single-layer-dominated PCBs, and the exposed die pad doubles as a thermal and grounding anchor. Timer compare channels produce buzzer tones and LED dimming, the ADC reads NTC thermistors for over-temperature protection, and the Two-Wire Interface can talk to an EEPROM or capacitive-touch controller. Wide 1.8V to 5.5V operation lets one design accept both mains-derived 5V and rechargeable 3.7V supplies, reducing SKU count across product families and simplifying certification across regional power variants.
Direkomendasikan
Lighting Control
For LED luminaires and DALI-style lighting nodes, the ATMEGA48V-10MI offers three timer/counters whose compare-match outputs generate hardware PWM for dimming without CPU intervention, keeping flicker-free, jitter-stable PWM even while firmware handles protocol parsing. The 10-bit ADC monitors LED current sense resistors and thermal feedback from an NTC on the heatsink, enabling closed-loop constant-current operation. The USART or Two-Wire Interface receives dimming commands from a master controller or DALI transceiver. Operation down to 1.8V supports designs powered from long LED-string bias rails, while the industrial temperature rating suits enclosed, heat-soaked luminaires. The debugWIRE on-chip debug over the single RESET pin simplifies firmware tuning of gamma-correction curves during development.
Direkomendasikan
Portable Measurement Instruments
Handheld meters and diagnostic tools benefit from the ATMEGA48V-10MI's 8-channel 10-bit ADC, low-voltage operation, and compact 5x5 mm footprint. Two extra ADC channels (ADC6, ADC7) available on the QFN package add measurement inputs beyond the six port-C channels, useful for battery-voltage monitoring in addition to signal inputs. The internal 1.1V bandgap reference enables ratiometric low-range measurements without external references, and the ADC noise reduction sleep mode lowers conversion noise for sensitive readings. A 16x2 LCD or segment display is driven from port pins, buttons are multiplexed, and results are logged to the 256B EEPROM between power cycles. Running from two AA cells at 3V, the device operates comfortably within its guaranteed 1.8V-5.5V envelope to end-of-battery.
Direkomendasikan
Remote Control and Radio Accessories
Wireless keyboards, remote controls, and low-cost radio accessories use the ATMEGA48V-10MI's power-down mode for multi-year coin-cell life and its USART or SPI to drive sub-GHz or 2.4GHz transceiver modules. The 1.8V floor permits direct operation from a 3V CR2032 across its full discharge curve, eliminating regulator dropout concerns near end-of-life. Hardware SPI (PB3-PB5) clocks transceiver data at rates well above the MCU's 10MHz interrupt budget, and pin-change interrupts on any GPIO wake the MCU on key presses within microseconds. The 23 I/O lines scan a button matrix directly, and the 256B EEPROM stores pairing keys and calibration data. debugWIRE eases RF stack debugging using only the RESET line, preserving I/O on this pin-limited package.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ATMEGA48V-10MI — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ATMEGA48V-10MU | ATMEGA48PV-10MUR | ATMEGA48PA-MUR | ATMEGA48-20MI | ATMEGA48P-20MMU |
|---|---|---|---|---|---|---|
| Package | 32-VFQFN (MLF) exposed pad | 32-VFQFN (MLF) - same | 32-VFQFN (MLF) - same | 32-VFQFN (MLF) - same | 32-VFQFN (MLF) - same | 32-VFQFN (MLF) - same |
| Brand | Microchip Technology (Atmel) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Supply Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 2.7 V to 5.5 V | 1.8 V to 5.5 V (PA) | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Maximum Clock Speed | 10 MHz | 10 MHz | 10 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash / SRAM / EEPROM | 4 KB / 512 B / 256 B | 4 KB / 512 B / 256 B | 4 KB / 512 B / 256 B | 4 KB / 512 B / 256 B | 4 KB / 512 B / 256 B | 4 KB / 512 B / 256 B |
| Power Technology | V (low voltage) | V (low voltage) | PV | picoPower | standard | P (picoPower class) |
| Packaging Format | Tray (MI) | Tape & Reel (MU) | Tape & Reel (MUR) | Tape & Reel (MUR) | Tray (MI) | Tape & Reel (MMU) |
| On-Chip Debug | debugWIRE | debugWIRE | debugWIRE | debugWIRE | debugWIRE | debugWIRE |
Diferensiator Kunci
- Full 1.8V low-voltage operation (vsATMEGA48-20MI)
- 20MHz picoPower upgrade path (vsATMEGA48PA-MUR)
- Identical die in reel packaging (vsATMEGA48V-10MU)
Catatan Desain
The 32-pad VFQFN/MLF uses perimeter pads plus a central exposed pad that must be soldered to a ground flood for mechanical reliability and thermal performance. Use a 4x4 array of small vias under the exposed pad to tie the die paddle to the internal ground plane without excessive solder wicking. Note that VCC and GND are duplicated (pins 4/6 and 3/5/21); connect all of them on the PCB - do not leave redundant power pins floating. Allow keep-out for the MLF's pad geometry when designing the stencil.
Connect AVCC (pin 18) to VCC through a low-pass RC network (e.g. 10 ohm resistor and 100 nF capacitor, per the datasheet ADC chapter) even if the ADC is unused, to guarantee the device powers correctly. Decouple each VCC pin with 100 nF close to the package. When operating near 1.8V, keep BOD (brown-out detector) enabled at the lowest trip level or disabled per the datasheet's minimum-voltage table, since BOD levels are voltage-dependent.
ISP programming shares PB3/PB4/PB5 (MOSI/MISO/SCK) and RESET (PC6). Provide a 6-pin ISP header or pad set on the layout, and avoid loads on these pins that exceed the programmer's drive (a 10k series resistor on MOSI/SCK helps). debugWIRE requires the DWEN fuse and disables RESET as reset pin - to re-enable ISP you must perform a high-voltage parallel-style recovery or use the debugWIRE-to-ISP procedure in AVR Studio. Design the RESET pull-up (10k) from the start.
Informasi Konformitas
Compliance status not stated in the verified web data; the MI suffix indicates industrial temperature grade. Distributor product pages (Mouser, Hotenda) typically list RoHS/lead-free status - verify before order.
