ATSAM4SA16BA-MU 120MHz Cortex-M4 64-QFN MCU | Microchip
MPN: ATSAM4SA16BA-MU ✓ AktifATSAM4SA16BA-MU Ringkasan
An ARM Cortex-M4 microcontroller is a 32-bit embedded processor designed around the Cortex-M profile, commonly used in industrial, communications, consumer, and IoT equipment. The ATSAM4SA16B family combines processor performance with Flash memory, SRAM, direct-memory-access support, a multi-layer bus matrix, and distributed peripheral memory. This integration allows control logic, communications, and analog functions to operate in one device while reducing the number of external components required on a compact printed circuit board.
The ATSAM4SA16BA-MU operates from a 1.62 V to 3.6 V power-supply range and supports a maximum clock frequency of 120 MHz. Its 1 MB Flash configuration provides space for boot code, application firmware, configuration data, and protocol stacks. The 160 KB SRAM shown in the device specification supports working memory for real-time tasks, while the multi-channel DMA architecture can transfer data between peripherals and memory with reduced processor intervention. The family also provides an extensive peripheral set for connectivity, system control, and analog interfacing.
A 64-QFN package measures 9 mm by 9 mm and supports dense PCB placement, but its fine pitch and exposed thermal requirements demand careful land-pattern and assembly design. The ATSAM4SA16B family is pin-to-pin compatible with Microchip SAM7S, SAM3N, and SAM3S microcontrollers, supporting controlled hardware reuse or migration when software and peripheral requirements are also compatible. Atmel Studio, the Atmel Software Framework, and the SAM4S-EK2 evaluation platform are associated with the family’s development ecosystem.
Typical uses include industrial control modules, serial gateways, building and automation controllers, sensor-hub equipment, and connected embedded products. The processor speed and DSP capability suit protocol handling, digital filtering, motion-related control, and real-time peripheral coordination. The 1.62 V minimum operating voltage also allows integration with low-voltage digital systems when the board-level power design and signal levels are compatible.
Designers should use the manufacturer’s pin-description table when assigning tracks and should verify operating conditions, peripheral multiplexing, and package details before release. Power sequencing, decoupling, clock configuration, and firmware initialization are central to a reliable implementation. The exposed-pad connection and PCB copper must follow the package layout guidance rather than relying on visual estimation.
This page combines device specifications, package and sourcing information, drop-in alternatives, application guidance, and engineering-oriented design notes. It provides a practical engineering summary for evaluating the ATSAM4SA16BA-MU alongside other Cortex-M4 microcontroller options for embedded control and connectivity designs.
Alternatif penggantian untuk ATSAM4SA16BA-MU — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ATSAM4SA16BA-MU (sama faktor bentuk dan footprint) — berbeda di dalam Package, Instruction Set, Memory Protection Unit, Operating Temperature, CAN.
ATSAM4S16BA-MUR
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ATSAM4SA16BA-MUR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ATSAM4SA16BA-AUR
✅ Drop-InKontak untuk harga
Lihat Datasheet →ATSAM4SD32BA-MU
✅ Drop-InKontak untuk harga
Lihat Datasheet →ATSAM3U4EA-AU
✅ Drop-InKontak untuk harga
Lihat Datasheet →ATSAM4SA16BA-MU Rating Maksimal & Karakteristik Listrik
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Core | ARM Cortex-M4 |
| Frekuensi Bawah Maximum | 120 MHz |
| Flash Memory | 1 MB (1M x 8) |
| RAM Size | 160 KB |
| Supply Voltage Range | 1.62 V to 3.6 V |
| Architecture | 32-bit |
| Cache | 2 KB |
| Memory Protection Unit | Yes |
| DSP Instruction Set | Yes |
| Instruction Set | Thumb-2 |
| DMA | Multi-channel direct memory access |
| Bus Architecture | Multi-layer bus matrix with distributed memory |
| Paket | 64-QFN (9 mm x 9 mm) |
| Tipe Mounting | Surface mount |
| Green Package | Yes |
| Temperature Grade | Industrial temperature range |
| Peripheral Set | Connectivity, system control, and analog interfacing peripherals |
| Software Compatibility | Pin-to-pin compatible with SAM7S, SAM3N, and SAM3S MCUs |
| Development Environment | Atmel Studio, Atmel Software Framework, and SAM4S-EK2 |
ATSAM4SA16BA-MU yes Diamant Konfigurasi Panduan
Konfigurasi pin untuk ATSAM4SA16BA-MU (yes pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk ATSAM4SA16BA-MU.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ATSAM4SA16BA-MU cocok untuk 6 aplikasis: Industrial Automation Controller, Industrial Serial Gateway, Building Automation Controller, Sensor Hub and IoT Gateway, Audio and Signal-Control Module, Motor and Equipment Control.
Industrial Automation Controller
The ATSAM4SA16BA-MU fits industrial automation controllers that combine sequence control, communications, and real-time peripheral handling. Its 120 MHz Cortex-M4 core provides processing headroom, while 1 MB Flash supports application code, configuration data, and field-bus or network protocol stacks. The 1.62 V to 3.6 V operating range allows use with low-voltage industrial logic. Multi-channel DMA can move data between communications and processing resources with reduced CPU intervention, helping maintain deterministic response times when the board also performs sensor acquisition and actuator sequencing.
Direkomendasikan
Industrial Serial Gateway
A serial gateway can use the ATSAM4SA16BA-MU to bridge local equipment to a higher-level network because the device combines a 120 MHz Cortex-M4 processor with 1 MB of Flash. That memory space can accommodate protocol stacks, framing logic, logging, and firmware updates, while 160 KB of SRAM supports active communication buffers. The device’s extensive connectivity and system-control peripheral set makes it suitable for gateways that must translate several serial interfaces, validate packets, and maintain an industrial protocol stack without using a separate processor.
Direkomendasikan
Building Automation Controller
The ATSAM4SA16BA-MU is appropriate for a building-automation controller that supervises lighting, HVAC, access, and environmental sensors. Its 120 MHz Cortex-M4 core can execute control schedules and communication tasks concurrently, and the 1 MB Flash capacity allows room for firmware, configuration tables, and diagnostics. The 1.62 V to 3.6 V supply range fits low-voltage system rails. A controller based on this MCU can use DMA for efficient peripheral transfers while prioritizing low-latency handling of sensor and switching inputs.
Direkomendasikan
Sensor Hub and IoT Gateway
The ATSAM4SA16BA-MU can act as a sensor hub because its Cortex-M4 core includes DSP instructions and an optional 2 KB cache for efficient data handling. At 120 MHz, the MCU can filter and package measurements from multiple sensing channels while its multi-channel DMA reduces processor involvement in peripheral transfers. The 1 MB Flash configuration supports local buffering, protocol code, and over-the-air update logic. This makes the device useful in IoT equipment that combines sampled sensor data with wired or wireless network management.
Direkomendasikan
Audio and Signal-Control Module
The ATSAM4SA16BA-MU can support audio or general signal-control modules because its Cortex-M4 processor supports the DSP instruction set at 120 MHz. The core can execute filtering, control, and communications functions while the 1 MB Flash stores application firmware and coefficient tables. The 160 KB SRAM allows multiple working buffers, and multi-channel DMA can move sampled data between memory and peripherals. Designers should use the alternate-function tables to assign communication and timer resources without conflicting with the selected signal-processing architecture.
Direkomendasikan
Motor and Equipment Control
The ATSAM4SA16BA-MU is suitable for embedded motor and equipment control where a fast 32-bit core must coordinate timers, communications, and protection logic. Its 120 MHz operating speed supports deterministic control calculations, while multi-channel DMA helps move position, current, or communication data efficiently. With 1 MB Flash and 160 KB SRAM, the controller can retain motion parameters, diagnostic data, and control code on-chip. The exact motor-interface peripherals and alternate functions must be checked for the selected pins before designing the power stage.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ATSAM4SA16BA-MU — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ATSAM4S16BA-MUR | ATSAM4SA16BA-MUR | ATSAM4SA16BA-AU | ATSAM4SD32BA-MU | ATSAM3U4EA-AU |
|---|---|---|---|---|---|---|
| Package | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M3 |
Diferensiator Kunci
- Higher processing performance within the same 64-QFN migration family (vsATSAM3U4EA-AU)
- Larger on-chip Flash option for firmware-heavy designs (vsATSAM4SA16BA-MUR)
- Direct 120 MHz Cortex-M4 configuration for closest-family sourcing (vsATSAM4S16BA-MUR)
Catatan Desain
Use the manufacturer’s 64-QFN land pattern and exposed-pad recommendation rather than creating a footprint from the 9 mm body size alone. The exposed pad is part of the thermal and electrical design and should connect to the intended ground or power plane according to the package drawing. Confirm paste coverage, pad dimensions, solder-mask clearance, and the PCB manufacturer’s fine-pitch assembly capability before releasing artwork for production.
Build the 1.62 V to 3.6 V power rail so it remains stable during Cortex-M4 execution and peripheral activity. Place the required bulk and high-frequency decoupling capacitors close to their associated supply and ground pins, and keep switching-converter and high-current digital return paths away from sensitive analog inputs. Review the datasheet’s recommended operating conditions and external-component requirements before selecting capacitor voltage ratings.
Assign pins from the ATSAM4SA16BA-MU alternate-function tables before routing signals because many communication, timer, and debug functions can occupy the same package locations. Separate clock, high-speed serial, and memory-interface traces from analog inputs where possible, provide a continuous ground reference, and route sensitive nets away from switching nodes and inductor areas. Confirm the programmed pin mux and peripheral instance in firmware after each board-level change.
Do not treat family-level compatibility as a guarantee that every firmware image runs unchanged on another ordering code. Before migrating among ATSAM4S16BA-MUR, ATSAM4SA16BA-MUR, ATSAM4SA16BA-AU, ATSAM4SD32BA-MU, or ATSAM3U4EA-AU, compare the device revision, memory map, boot configuration, peripheral instance numbers, pin multiplexing, clock settings, interrupt vectors, and package drawing. Rebuild the project using the exact replacement device’s configuration files.
Informasi Konformitas
The manufacturer product information identifies a green package but does not state the specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status in the available sources. Automotive qualification is not stated for this ordering code.