Microchip Technology

ATSAM4SA16BA-MU 120MHz Cortex-M4 64-QFN MCU | Microchip

部品番号: ATSAM4SA16BA-MU ✓ 生産中
1.62 V to 3.6 V Vdss 64-QFN (9 mm x 9 mm) Package 120 MHz Speed 1 MB (1M x 8) Memory
MOQ: 1 |

ATSAM4SA16BA-MU 概要

The Microchip Technology ATSAM4SA16BA-MU is an ARM Cortex-M4 microcontroller operating up to 120 MHz, with 1 MB of embedded Flash memory and 64-QFN packaging. The device is designed for embedded control, connectivity, system control, and analog interfacing applications. Its Cortex-M4 processor includes a 2 KB cache, Memory Protection Unit, DSP instruction set, and Thumb-2 instruction set, providing a compact platform for real-time control and connected embedded products.

An ARM Cortex-M4 microcontroller is a 32-bit embedded processor designed around the Cortex-M profile, commonly used in industrial, communications, consumer, and IoT equipment. The ATSAM4SA16B family combines processor performance with Flash memory, SRAM, direct-memory-access support, a multi-layer bus matrix, and distributed peripheral memory. This integration allows control logic, communications, and analog functions to operate in one device while reducing the number of external components required on a compact printed circuit board.

The ATSAM4SA16BA-MU operates from a 1.62 V to 3.6 V power-supply range and supports a maximum clock frequency of 120 MHz. Its 1 MB Flash configuration provides space for boot code, application firmware, configuration data, and protocol stacks. The 160 KB SRAM shown in the device specification supports working memory for real-time tasks, while the multi-channel DMA architecture can transfer data between peripherals and memory with reduced processor intervention. The family also provides an extensive peripheral set for connectivity, system control, and analog interfacing.

A 64-QFN package measures 9 mm by 9 mm and supports dense PCB placement, but its fine pitch and exposed thermal requirements demand careful land-pattern and assembly design. The ATSAM4SA16B family is pin-to-pin compatible with Microchip SAM7S, SAM3N, and SAM3S microcontrollers, supporting controlled hardware reuse or migration when software and peripheral requirements are also compatible. Atmel Studio, the Atmel Software Framework, and the SAM4S-EK2 evaluation platform are associated with the family’s development ecosystem.

Typical uses include industrial control modules, serial gateways, building and automation controllers, sensor-hub equipment, and connected embedded products. The processor speed and DSP capability suit protocol handling, digital filtering, motion-related control, and real-time peripheral coordination. The 1.62 V minimum operating voltage also allows integration with low-voltage digital systems when the board-level power design and signal levels are compatible.

Designers should use the manufacturer’s pin-description table when assigning tracks and should verify operating conditions, peripheral multiplexing, and package details before release. Power sequencing, decoupling, clock configuration, and firmware initialization are central to a reliable implementation. The exposed-pad connection and PCB copper must follow the package layout guidance rather than relying on visual estimation.

This page combines device specifications, package and sourcing information, drop-in alternatives, application guidance, and engineering-oriented design notes. It provides a practical engineering summary for evaluating the ATSAM4SA16BA-MU alongside other Cortex-M4 microcontroller options for embedded control and connectivity designs.

ドロップイン代替品: ATSAM4SA16BA-MU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ATSAM4SA16BA-MU (同一形状・フットプリント) — 相違点: Package, Instruction Set, Memory Protection Unit, Operating Temperature, CAN.

Microchip Technology
Package: 144-pin LQFP (20x20 mm), surface mount
Memory Protection Unit: Yes (MPU)
Operating Temperature: -40 C to +85 C (industrial)
比較対象 ATSAM4SA16BA-MU →
Microchip Technology
Package: 64-QFN (9x9 mm)
Instruction Set: Thumb-2, DSP instruction set
Memory Protection Unit: Yes (MPU)
比較対象 ATSAM4SA16BA-MU →
Microchip Technology
Package: 64-QFN (9x9 mm)
Instruction Set: Thumb-2, DSP instruction set
Memory Protection Unit: Yes (MPU)
比較対象 ATSAM4SA16BA-MU →
Microchip Technology
Package: 64-QFN, 9 x 9 mm
Instruction Set: Thumb-2 with DSP instructions
Memory Protection Unit: Integrated
比較対象 ATSAM4SA16BA-MU →
Microchip Technology
Package: 64-LQFP (10x10 mm)
CAN: 2x CAN 2.0B controllers
比較対象 ATSAM4SA16BA-MU →
Microchip Technology
Package: 64-pin QFN (9x9 mm)
Instruction Set: Thumb-2, DSP extensions
Operating Temperature: -40 °C to +85 °C (industrial)
比較対象 ATSAM4SA16BA-MU →

ATSAM4S16BA-MUR

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 64-QFN (9x9)
ARM Cortex-M4 · 32-bit · 120 MHz · 2 Kbytes · 1 MB (1M x 8), dual-bank with ECC · 128 KB · 1.62 V to 3.6 V · 200 uA/MHz

価格はお問い合わせください

データシートを見る →

ATSAM4SA16BA-MUR

✅ ドロップイン
📦 64-QFN (9x9)
Same 120 MHz Cortex-M4 and 1 MB Flash configuration; ordering-code suffix differs with no listed core, speed, or memory change

📋 参考代替品(カタログ未掲載)

ATSAM4SA16BA-AUR

✅ ドロップイン
Microchip Technology
📦 64-QFN (9x9)
ARM Cortex-M4 with FPU (single-core) · 32-bit RISC · 120 MHz · 1 MB (1024 KB, 1M x 8) · 128 KB · 64-LQFP (10x10 mm) · 1.2 V / 3.3 V · Industrial (-40C to +85C)

価格はお問い合わせください

データシートを見る →

ATSAM4SD32BA-MU

✅ ドロップイン
Microchip Technology
📦 64-QFN (9x9)
ARM Cortex-M4 with FPU and MPU · 120 MHz · 2 KB · 2 MB (2 M x 8) · 160 KB · Thumb-2, DSP extensions · 64-pin QFN (9x9 mm) · 1.2 V (internal regulator)

価格はお問い合わせください

データシートを見る →

ATSAM3U4EA-AU

✅ ドロップイン
Microchip Technology
📦 64-QFN (9x9)
ARM Cortex-M3 revision 2.0 · 96 MHz · Thumb-2 · 256 KB (dual-bank, 128-bit wide access) · 52 KB · Yes (MPU) · 1.62 V to 3.6 V · -40 C to +85 C (industrial)

価格はお問い合わせください

データシートを見る →

ATSAM4SA16BA-MU 最大定格&電気的特性

Product Type 32-bit ARM Cortex-M4 microcontroller
Core ARM Cortex-M4
最大クロック周波数 120 MHz
Flash Memory 1 MB (1M x 8)
RAM Size 160 KB
Supply Voltage Range 1.62 V to 3.6 V
Architecture 32-bit
Cache 2 KB
Memory Protection Unit Yes
DSP Instruction Set Yes
Instruction Set Thumb-2
DMA Multi-channel direct memory access
Bus Architecture Multi-layer bus matrix with distributed memory
パッケージ 64-QFN (9 mm x 9 mm)
実装タイプ Surface mount
Green Package Yes
Temperature Grade Industrial temperature range
Peripheral Set Connectivity, system control, and analog interfacing peripherals
Software Compatibility Pin-to-pin compatible with SAM7S, SAM3N, and SAM3S MCUs
Development Environment Atmel Studio, Atmel Software Framework, and SAM4S-EK2

ATSAM4SA16BA-MU yes ピン配置ガイド

ATSAM4SA16BA-MU (yes パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

ATSAM4SA16BA-MU の yes パッケージピン配置図

詳細なピン配置データはありません: ATSAM4SA16BA-MU.

詳細は データシート をご参照ください。

主な用途

ATSAM4SA16BA-MU の用途: 6 件s: Industrial Automation Controller, Industrial Serial Gateway, Building Automation Controller, Sensor Hub and IoT Gateway, Audio and Signal-Control Module, Motor and Equipment Control.

🏭

Industrial Automation Controller

The ATSAM4SA16BA-MU fits industrial automation controllers that combine sequence control, communications, and real-time peripheral handling. Its 120 MHz Cortex-M4 core provides processing headroom, while 1 MB Flash supports application code, configuration data, and field-bus or network protocol stacks. The 1.62 V to 3.6 V operating range allows use with low-voltage industrial logic. Multi-channel DMA can move data between communications and processing resources with reduced CPU intervention, helping maintain deterministic response times when the board also performs sensor acquisition and actuator sequencing.

🌐

Industrial Serial Gateway

A serial gateway can use the ATSAM4SA16BA-MU to bridge local equipment to a higher-level network because the device combines a 120 MHz Cortex-M4 processor with 1 MB of Flash. That memory space can accommodate protocol stacks, framing logic, logging, and firmware updates, while 160 KB of SRAM supports active communication buffers. The device’s extensive connectivity and system-control peripheral set makes it suitable for gateways that must translate several serial interfaces, validate packets, and maintain an industrial protocol stack without using a separate processor.

🧩

Building Automation Controller

The ATSAM4SA16BA-MU is appropriate for a building-automation controller that supervises lighting, HVAC, access, and environmental sensors. Its 120 MHz Cortex-M4 core can execute control schedules and communication tasks concurrently, and the 1 MB Flash capacity allows room for firmware, configuration tables, and diagnostics. The 1.62 V to 3.6 V supply range fits low-voltage system rails. A controller based on this MCU can use DMA for efficient peripheral transfers while prioritizing low-latency handling of sensor and switching inputs.

🧩

Sensor Hub and IoT Gateway

The ATSAM4SA16BA-MU can act as a sensor hub because its Cortex-M4 core includes DSP instructions and an optional 2 KB cache for efficient data handling. At 120 MHz, the MCU can filter and package measurements from multiple sensing channels while its multi-channel DMA reduces processor involvement in peripheral transfers. The 1 MB Flash configuration supports local buffering, protocol code, and over-the-air update logic. This makes the device useful in IoT equipment that combines sampled sensor data with wired or wireless network management.

🎧

Audio and Signal-Control Module

The ATSAM4SA16BA-MU can support audio or general signal-control modules because its Cortex-M4 processor supports the DSP instruction set at 120 MHz. The core can execute filtering, control, and communications functions while the 1 MB Flash stores application firmware and coefficient tables. The 160 KB SRAM allows multiple working buffers, and multi-channel DMA can move sampled data between memory and peripherals. Designers should use the alternate-function tables to assign communication and timer resources without conflicting with the selected signal-processing architecture.

⚡

Motor and Equipment Control

The ATSAM4SA16BA-MU is suitable for embedded motor and equipment control where a fast 32-bit core must coordinate timers, communications, and protection logic. Its 120 MHz operating speed supports deterministic control calculations, while multi-channel DMA helps move position, current, or communication data efficiently. With 1 MB Flash and 160 KB SRAM, the controller can retain motion parameters, diagnostic data, and control code on-chip. The exact motor-interface peripherals and alternate functions must be checked for the selected pins before designing the power stage.

おすすめ製品の概要

ATSAM4E16EA-ANR Microchip Technology 使用用途: Industrial Automation Controller MC9S08SH16CWL NXP Semiconductors 使用用途: Industrial Automation Controller KSZ8041MLL-R Ethernet interface for connected serial equipment 使用用途: Industrial Serial Gateway KSZ8081RNACA Microchip Technology 使用用途: Industrial Serial Gateway LAN7500I-ABZ-TR USB-to-Ethernet connectivity for building controllers 使用用途: Building Automation Controller SP3232EHEY-L MaxLinear 使用用途: Building Automation Controller EFM32TG110F8-B-QFN24R Low-power microcontroller family for connected sensor nodes 使用用途: Sensor Hub and IoT Gateway EFM32TG230F8-B-QFN64R Low-power 64-pin microcontroller alternative for sensor networking 使用用途: Sensor Hub and IoT Gateway TAS5558DCAR Texas Instruments 使用用途: Audio and Signal-Control Module TAS5508PAGR Texas Instruments 使用用途: Audio and Signal-Control Module MC9S08SH8CTGR NXP Semiconductors 使用用途: Motor and Equipment Control MC9S08SH16CTL NXP Semiconductors 使用用途: Motor and Equipment Control
What is the ATSAM4SA16BA-MU?
The ATSAM4SA16BA-MU is a 32-bit ARM Cortex-M4 microcontroller from Microchip Technology, operating up to 120 MHz with 1 MB of Flash memory and 160 KB of SRAM. According to the manufacturer’s ATSAM4SA16B product information, the device includes a 2 KB cache, Memory Protection Unit, DSP instructions, and Thumb-2 instructions. It is supplied in a green 64-QFN package measuring 9 mm by 9 mm and targets embedded control, connectivity, system control, and analog-interface applications.
What is the operating voltage of ATSAM4SA16BA-MU?
The ATSAM4SA16BA-MU operates from 1.62 V to 3.6 V. The manufacturer’s ATSAM4SA16B product page identifies this range as the device power-supply specification. When designing the power tree, confirm that every connected peripheral, communication transceiver, and I/O signal remains within its permitted voltage limits. The MCU can therefore serve as the controller for a low-voltage 3.3 V embedded system without requiring a separate higher-voltage internal processing rail.
How much Flash and RAM does ATSAM4SA16BA-MU have?
The ATSAM4SA16BA-MU provides 1 MB of Flash memory configured as 1M x 8 and 160 KB of SRAM. The Flash capacity supports application firmware, boot code, configuration data, and communication stacks, while the SRAM accommodates working buffers and real-time control tasks. These memory figures come from the manufacturer product information and the exact ordering-code listing for ATSAM4SA16BA-MU.
What processor does ATSAM4SA16BA-MU use?
The ATSAM4SA16BA-MU uses an ARM Cortex-M4 processor operating up to 120 MHz. The core includes a 2 KB cache, a Memory Protection Unit, the DSP instruction set, and the Thumb-2 instruction set. These features make the device suitable for real-time control, signal-processing, communications, and embedded applications that require deterministic peripheral coordination and efficient 32-bit processing.
Where can I download the ATSAM4SA16BA-MU datasheet PDF?
The ATSAM4SA16BA-MU datasheet PDF is available through the Atmel document link in the source list, while the manufacturer product page provides the family overview. Use the datasheet’s pin-description table, electrical-characteristics tables, and package drawings when designing the PCB. The document URL for the manufacturer’s ATSAM4SA16B family is https://www.microchip.com/en-us/product/ATSAM4SA16B, and the exact ATSAM4SA16BA-MU ordering code is ATSAM4SA16BA-MU.
Where is the ATSAM4SA16BA-MU pinout?
The ATSAM4SA16BA-MU pinout is published in the manufacturer datasheet rather than in the product-listing snippets used for this page. The package is a 64-QFN with 9 mm by 9 mm body dimensions. Use the pin-description table and package drawing to assign power, ground, reset, clock, debug, and multiplexed peripheral functions. Do not infer alternate-function assignments from package position alone because peripheral multiplexing changes pin behavior by device configuration.
What is the ATSAM4SA16BA-MU package?
The ATSAM4SA16BA-MU is packaged in a 64-QFN measuring 9 mm by 9 mm. According to the manufacturer’s device listing, it is a green, surface-mount industrial-temperature component. The QFN package supports compact layouts but requires a correctly designed exposed-pad land pattern, adequate solder-paste stencil area, and controlled reflow. Its fine-pitch construction makes assembly capability and package drawing review important before committing to the design.
Is ATSAM4SA16BA-MU suitable for industrial control systems?
Yes, the ATSAM4SA16BA-MU is suitable for industrial control systems that operate from 1.62 V to 3.6 V and require real-time 32-bit processing. Its 120 MHz Cortex-M4 core, multi-channel DMA, extensive peripheral set, and 1 MB Flash memory support control loops, communications, and system-management tasks. The industrial temperature package designation also supports use in equipment expected to operate beyond typical consumer-temperature conditions, subject to the complete datasheet limits.
Can ATSAM4SA16BA-MU replace ATSAM3U4EA-AU?
The ATSAM4SA16BA-MU can be considered for a SAM3U4EA-AU replacement when the PCB footprint, power rails, clock strategy, peripheral assignments, and firmware requirements are compatible. The ATSAM4SA16BA-MU provides a Cortex-M4 core at 120 MHz, while the comparison candidate belongs to the earlier SAM3U family. Because a package match alone does not prove migration compatibility, review the Microchip migration documentation and pin descriptions before replacing an assembled design.
ATSAM4SA16BA-MU vs ATSAM4SD32BA-MU: which should I choose?
Choose ATSAM4SA16BA-MU when a 1 MB Flash configuration is sufficient, and consider ATSAM4SD32BA-MU when the design requires the larger memory configuration offered by the D-series part. Both are identified as 120 MHz ARM Cortex-M4 devices associated with the SAM4S family. The exact memory, package, peripheral, and pin-compatibility details must be checked for the specific ordering code before selecting either device, since greater Flash capacity can affect pin multiplexing, boot options, and firmware layout.
When should I choose ATSAM4SA16BA-MU over another Cortex-M4 MCU?
Choose ATSAM4SA16BA-MU when the design benefits from a 120 MHz Cortex-M4 core, 1 MB Flash, 160 KB SRAM, a 1.62 V to 3.6 V supply range, and the SAM4S peripheral ecosystem. It is particularly attractive for industrial and communication-oriented products using Atmel Studio or the Atmel Software Framework. Select a different MCU when its package, automotive qualification, extended temperature range, safety features, memory capacity, or ecosystem better matches the product requirements.
What is the best drop-in replacement for ATSAM4SA16BA-MU?
ATSAM4S16BA-MUR is the closest same-family drop-in candidate identified for ATSAM4SA16BA-MU because it is associated with the same 64-QFN, 120 MHz, 1 MB Flash SAM4S platform. Before substitution, verify the exact ordering-code suffix, exposed-pad layout, temperature grade, and pin-multiplexing requirements. A true drop-in decision also depends on firmware compatibility and whether the alternative’s ordering code changes the reel, moisture, or packaging interpretation.
Is ATSAM4SA16BA-MU pin compatible with SAM3S and SAM7S devices?
Yes, the ATSAM4SA16BA-MU family is stated to be pin-to-pin compatible with SAM7S, SAM3N, and SAM3S microcontrollers. This compatibility provides a practical migration path when moving from an earlier SAM device to the 120 MHz Cortex-M4 architecture. The statement applies to the family and compatible package arrangements; designers must still verify speed, memory, peripheral multiplexing, voltage, and firmware differences for the exact source and destination ordering codes.
Where can I buy ATSAM4SA16BA-MU and check its price?
Use the Request a Quote form on this page to request ATSAM4SA16BA-MU pricing, stock confirmation, lead time, and minimum order quantity. The exact ATSAM4SA16BA-MU is identified as an active 64-QFN microcontroller in distributor and manufacturer listings, but commercial availability can change with inventory and order volume. The quote form avoids presenting a static price that may no longer reflect current purchasing conditions.
What is the lead time and stock status for ATSAM4SA16BA-MU?
Current lead time, minimum order quantity, and stock status should be confirmed through the Request a Quote form on this page. A distributor listing describes the exact ATSAM4SA16BA-MU as available for purchase, while another catalog result reports limited inventory; neither statement guarantees allocation for a new production order. For production planning, include the required quantity, date code preference, target shipment date, and approved manufacturer or authorized sourcing route in the request.
Is ATSAM4SA16BA-MU in stock?
The ATSAM4SA16BA-MU is shown as purchasable in current distributor listings, but stock levels can change without notice. Request an inventory confirmation through the Request a Quote form on this page and state your required quantity and delivery target. For production builds, also request lifecycle and traceability information so the procurement decision accounts for date codes, scheduled reuse, and ongoing manufacturing status.
What are the key specifications of ATSAM4SA16BA-MU that engineers should know?
The principal ATSAM4SA16BA-MU specifications are a 120 MHz ARM Cortex-M4 core, 1 MB Flash, 160 KB SRAM, a 1.62 V to 3.6 V operating range, and a 64-QFN 9 mm by 9 mm package. It also provides a 2 KB cache, Memory Protection Unit, DSP and Thumb-2 instruction sets, multi-channel DMA, and a multi-layer bus matrix. These characteristics make it appropriate for real-time embedded control and connected industrial products.
How do I develop firmware for ATSAM4SA16BA-MU?
Use Atmel Studio with the Atmel Software Framework as the principal development environment associated with the ATSAM4SA16B family, and use SAM4S-EK2 as the corresponding evaluation platform. The Cortex-M4 core supports Thumb-2 and DSP instructions, while multi-channel DMA can offload data transfers. Begin with the device-specific startup files, linker configuration, clock initialization, and pin-muxing definitions specified for ATSAM4SA16BA-MU rather than adapting another SAM4S device without checking its memory and peripheral configuration.

エンジニアリング参考データ: ATSAM4SA16BA-MU — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose ATSAM4SA16BA-MU when an embedded product needs a 120 MHz Cortex-M4 core, 1 MB Flash, 160 KB SRAM, and a 64-QFN footprint within a 1.62 V to 3.6 V supply range. It is well suited to industrial controllers, serial gateways, sensor hubs, and connected equipment using the Atmel development ecosystem. ATSAM4S16BA-MUR is the closest same-family sourcing option when the listed core, memory, and package ratings remain unchanged. ATSAM4SA16BA-MUR and ATSAM4SA16BA-AU are ordering-code alternatives, subject to suffix-specific qualification and availability review. Consider ATSAM4SD32BA-MU when 3 MB Flash provides useful code, logging, or update headroom, but verify memory-dependent pin multiplexing and firmware configuration. ATSAM3U4EA-AU is a migration candidate from an earlier Cortex-M3 generation, not an automatic firmware replacement. For every substitution, confirm the exact package drawing, exposed pad, temperature grade, power limits, peripheral mapping, and boot configuration.

代替品との比較

パラメータ この製品 ATSAM4S16BA-MUR ATSAM4SA16BA-MUR ATSAM4SA16BA-AU ATSAM4SD32BA-MU ATSAM3U4EA-AU
Package 64-QFN (9x9) 64-QFN (9x9) 64-QFN (9x9) 64-QFN (9x9) 64-QFN (9x9) 64-QFN (9x9)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M3

主な差別化要因

  • Higher processing performance within the same 64-QFN migration family (vs ATSAM3U4EA-AU)
  • Larger on-chip Flash option for firmware-heavy designs (vs ATSAM4SA16BA-MUR)
  • Direct 120 MHz Cortex-M4 configuration for closest-family sourcing (vs ATSAM4S16BA-MUR)

設計ノート

Use the manufacturer’s 64-QFN land pattern and exposed-pad recommendation rather than creating a footprint from the 9 mm body size alone. The exposed pad is part of the thermal and electrical design and should connect to the intended ground or power plane according to the package drawing. Confirm paste coverage, pad dimensions, solder-mask clearance, and the PCB manufacturer’s fine-pitch assembly capability before releasing artwork for production.

Build the 1.62 V to 3.6 V power rail so it remains stable during Cortex-M4 execution and peripheral activity. Place the required bulk and high-frequency decoupling capacitors close to their associated supply and ground pins, and keep switching-converter and high-current digital return paths away from sensitive analog inputs. Review the datasheet’s recommended operating conditions and external-component requirements before selecting capacitor voltage ratings.

Assign pins from the ATSAM4SA16BA-MU alternate-function tables before routing signals because many communication, timer, and debug functions can occupy the same package locations. Separate clock, high-speed serial, and memory-interface traces from analog inputs where possible, provide a continuous ground reference, and route sensitive nets away from switching nodes and inductor areas. Confirm the programmed pin mux and peripheral instance in firmware after each board-level change.

Do not treat family-level compatibility as a guarantee that every firmware image runs unchanged on another ordering code. Before migrating among ATSAM4S16BA-MUR, ATSAM4SA16BA-MUR, ATSAM4SA16BA-AU, ATSAM4SD32BA-MU, or ATSAM3U4EA-AU, compare the device revision, memory map, boot configuration, peripheral instance numbers, pin multiplexing, clock settings, interrupt vectors, and package drawing. Rebuild the project using the exact replacement device’s configuration files.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer product information identifies a green package but does not state the specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status in the available sources. Automotive qualification is not stated for this ordering code.

関連検索

ATSAM4SA16BA-MU datasheet ATSAM4SA16BA-MU pinout ATSAM4SA16BA-MU datasheet pdf ATSAM4SA16BA-MU specifications ATSAM4SA16BA-MU 120MHz Cortex-M4 ATSAM4SA16BA-MU 64-QFN pinout ATSAM4SA16BA-MU equivalent ATSAM4SA16BA-MU replacement ATSAM4SA16BA-MU cross reference ATSAM4SA16BA-MU vs ATSAM4SD32BA-MU ATSAM4SA16BA-MU price ATSAM4SA16BA-MU stock Microchip ATSAM4SA16BA-MU ATSAM4SA16BA-MU application circuit

関連部品&用語

Microchip Technology ATSAM4SA16BA-MU ATSAM4SA16B ARM Cortex-M4 ATSAM4S16BA-MUR ATSAM4SA16BA-MUR ATSAM4SA16BA-AU ATSAM4SD32BA-MU ATSAM3U4EA-AU 32-bit microcontroller embedded microcontroller microcontroller semiconductor ARM Cortex-M3 Thumb-2 instruction set DSP instruction set Memory Protection Unit multi-channel DMA multi-layer bus matrix 64-QFN QFN package family surface-mount technology Atmel Studio Atmel Software Framework SAM4S-EK2 1.62 V to 3.6 V power supply 120 MHz clock 1 MB Flash memory 160 KB SRAM industrial control serial gateway building automation sensor hub
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示