ATSAMD51P20A-AUT - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
MPN: ATSAMD51P20A-AUT ✓ AktifATSAMD51P20A-AUT Ringkasan
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The Cortex-M4F architecture adds a single-precision IEEE 754 Floating Point Unit and a DSP instruction set, which accelerates closed-loop control loops and signal-processing tasks. Within the broader hierarchy, the ATSAMD51P20A sits as: MCU -> 32-bit MCU -> ARM Cortex-M4F MCU -> SAM D51 family -> Microchip microcontrollers. It competes directly with other high-performance Cortex-M4F parts such as STM32F4 and Kinetis K6x.
Key features of the ATSAMD51P20A-AUT include 120 MHz CPU clock with FPU, 1 MB dual-panel Flash with ECC, 256 KB SRAM, a 12-bit 1 MSPS ADC with up to 32 channels, two 12-bit DACs, four SERCOM channels (configurable as UART/SPI/I2C), an on-chip high-speed USB 2.0 PHY, a CAN-FD controller, an Ethernet MAC with 1588 PTP, and an integrated 32 kHz RTC. The 128-TQFP package exposes a rich GPIO set while keeping the part compatible with standard SMT reflow lines.
Architecturally, the SAM D51 uses Microchip's event system and SERCOM peripherals to allow flexible peripheral routing without fixed pin mapping. The 1 MB dual-panel Flash allows simultaneous read-while-write, enabling reliable in-field firmware upgrades. The device operates from 1.71V to 3.63V, and integrates a high-accuracy internal 48 MHz DFLL that can be locked to the USB SOF for jitter-free USB.
Typical applications include automotive body electronics, industrial HMI panels, building automation controllers, IoT edge nodes with USB or Ethernet connectivity, sensor fusion hubs, and portable medical devices. The combination of FPU, large SRAM, Ethernet, and CAN-FD makes the part attractive as a system-on-chip in mid-complexity designs.
When designing with the ATSAMD51P20A-AUT, ensure the decoupling network follows Microchip's recommended 100 nF + 4.7 uF per VDD pin, place the 32.768 kHz crystal within 5 mm of the XIN32/XOUT32 pins, and respect the 4-layer PCB layout guideline for the high-speed USB differential pair. The automotive-grade variant (-AUT) is rated to +85C; for +125C designs, consult the -AFT (automotive grade 1) family member instead.
This page synthesizes distributor pricing, parametric comparison with other SAM D51 variants, drop-in alternatives in the same 128-TQFP footprint, and PCB design notes not consolidated in the manufacturer datasheet.
Alternatif penggantian untuk ATSAMD51P20A-AUT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ATSAMD51P20A-AUT (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, DAC, Operating Temperature, Core.
ATSAMD51P20A-AU
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ATSAMD51P20A-AFT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ATSAMD51P19A-AUT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ATSAMD51P19A-AFT
✅ Drop-InKontak untuk harga
Lihat Datasheet →ATSAMD51N20A-AU
✅ Drop-InKontak untuk harga
Lihat Datasheet →ATSAMD51P20A-AUT Rating Maksimal & Karakteristik Listrik
| Core Architecture | ARM Cortex-M4F with FPU |
| Maximum CPU Clock | 120 MHz |
| Flash Memory | 1 MB (1M x 8) with ECC, dual-panel |
| SRAM | 256 KB |
| Operating Voltage Range | 1.71 V to 3.63 V |
| Paket | 128-TQFP (14 x 14 mm) |
| Jumlah Pin | 128 |
| ADC | 12-bit, up to 1 MSPS |
| DAC | 2 x 12-bit |
| Communication Interfaces | SERCOM (UART/SPI/I2C), USB 2.0 FS, CAN-FD, Ethernet MAC with 1588 PTP |
| Rentang Suhu Kerja | -40 C to +85 C (automotive grade) |
| Tipe Mounting | Surface Mount |
| AEC-Q100 Qualification | Yes (automotive grade) |
| Status RoHS | Compliant |
| Level MSL | 3 (168 hours) |
Konfigurasi Pin ATSAMD51P20A-AUT
| Pin produk 1 | PB09 — GPIO PB09 / SERCOM pad |
| Pin produk 2 | PB10 — GPIO PB10 / SERCOM pad |
| Pin produk 3 | PB11 — GPIO PB11 / SERCOM pad |
| Pin produk 4 | VDDIO — Digital I/O supply voltage |
| Pin produk 5 | GND — Ground |
| Pin produk 6 | PA12 — GPIO PA12 / SERCOM pad |
| Pin produk 7 | PA13 — GPIO PA13 / SERCOM pad |
| Pin produk 8 | PA14 — GPIO PA14 / SERCOM pad |
| Pin produk 9 | PA15 — GPIO PA15 / SERCOM pad |
| Pin produk 10 | PA16 — GPIO PA16 |
| Pin produk 11 | PA17 — GPIO PA17 |
| Pin produk 12 | VDDIO — Digital I/O supply voltage |
| Pin produk 13 | GND — Ground |
| Pin produk 14 | PA18 — GPIO PA18 |
| Pin produk 15 | PA19 — GPIO PA19 |
| Pin produk 16 | PA20 — GPIO PA20 |
| Pin produk 17 | PA21 — GPIO PA21 |
| Pin produk 18 | PB12 — GPIO PB12 / SERCOM pad |
| Pin produk 19 | PB13 — GPIO PB13 / SERCOM pad |
| Pin produk 20 | PB14 — GPIO PB14 / SERCOM pad |
| Pin produk 21 | PB15 — GPIO PB15 / SERCOM pad |
| Pin produk 22 | PA22 — GPIO PA22 |
| Pin produk 23 | PA23 — GPIO PA23 |
| Pin produk 24 | PA24 — GPIO PA24 |
| Pin produk 25 | PA25 — GPIO PA25 |
| Pin produk 26 | GND — Ground |
| Pin produk 27 | VDDIO — Digital I/O supply voltage |
| Pin produk 28 | PB16 — GPIO PB16 |
| Pin produk 29 | PB17 — GPIO PB17 |
| Pin produk 30 | PB18 — GPIO PB18 |
| Pin produk 31 | PB19 — GPIO PB19 |
| Pin produk 32 | PB20 — GPIO PB20 |
| Pin produk 33 | PB21 — GPIO PB21 |
| Pin produk 34 | PA26 — GPIO PA26 |
| Pin produk 35 | PA27 — GPIO PA27 |
| Pin produk 36 | PA28 — GPIO PA28 |
| Pin produk 37 | PA29 — GPIO PA29 |
| Pin produk 38 | PA30 — GPIO PA30 |
| Pin produk 39 | PA31 — GPIO PA31 |
| Pin produk 40 | GND — Ground |
| Pin produk 41 | VDDIO — Digital I/O supply voltage |
| Pin produk 42 | PB22 — GPIO PB22 |
| Pin produk 43 | PB23 — GPIO PB23 |
| Pin produk 44 | PB24 — GPIO PB24 |
| Pin produk 45 | PB25 — GPIO PB25 |
| Pin produk 46 | PB26 — GPIO PB26 |
| Pin produk 47 | PB27 — GPIO PB27 |
| Pin produk 48 | PB28 — GPIO PB28 |
| Pin produk 49 | PB29 — GPIO PB29 |
| Pin produk 50 | PB30 — GPIO PB30 |
| Pin produk 51 | PB31 — GPIO PB31 |
| Pin produk 52 | PC00 — GPIO PC00 |
| Pin produk 53 | PC01 — GPIO PC01 |
| Pin produk 54 | PC02 — GPIO PC02 |
| Pin produk 55 | PC03 — GPIO PC03 |
| Pin produk 56 | VDDIO — Digital I/O supply voltage |
| Pin produk 57 | GND — Ground |
| Pin produk 58 | PC04 — GPIO PC04 |
| Pin produk 59 | PC05 — GPIO PC05 |
| Pin produk 60 | PC06 — GPIO PC06 |
| Pin produk 61 | PC07 — GPIO PC07 |
| Pin produk 62 | PC08 — GPIO PC08 |
| Pin produk 63 | PC09 — GPIO PC09 |
| Pin produk 64 | PC10 — GPIO PC10 |
| Pin produk 65 | PC11 — GPIO PC11 |
| Pin produk 66 | PC12 — GPIO PC12 |
| Pin produk 67 | PC13 — GPIO PC13 |
| Pin produk 68 | PC14 — GPIO PC14 |
| Pin produk 69 | PC15 — GPIO PC15 |
| Pin produk 70 | PC16 — GPIO PC16 |
| Pin produk 71 | PC17 — GPIO PC17 |
| Pin produk 72 | PC18 — GPIO PC18 |
| Pin produk 73 | PC19 — GPIO PC19 |
| Pin produk 74 | PC20 — GPIO PC20 |
| Pin produk 75 | PC21 — GPIO PC21 |
| Pin produk 76 | VDDIO — Digital I/O supply voltage |
| Pin produk 77 | GND — Ground |
| Pin produk 78 | PC22 — GPIO PC22 |
| Pin produk 79 | PC23 — GPIO PC23 |
| Pin produk 80 | PC24 — GPIO PC24 |
| Pin produk 81 | PC25 — GPIO PC25 |
| Pin produk 82 | PC26 — GPIO PC26 |
| Pin produk 83 | PC27 — GPIO PC27 |
| Pin produk 84 | PC28 — GPIO PC28 |
| Pin produk 85 | PA00 — GPIO PA00 / XIN32 |
| Pin produk 86 | PA01 — GPIO PA01 / XOUT32 |
| Pin produk 87 | PA02 — GPIO PA02 / ADC AIN0 |
| Pin produk 88 | PA03 — GPIO PA03 / ADC AIN1 |
| Pin produk 89 | VDDANA — Analog supply voltage |
| Pin produk 90 | GNDANA — Analog ground |
| Pin produk 91 | PA04 — GPIO PA04 / ADC AIN2 / VREF |
| Pin produk 92 | PA05 — GPIO PA05 / ADC AIN3 |
| Pin produk 93 | PA06 — GPIO PA06 / ADC AIN4 |
| Pin produk 94 | PA07 — GPIO PA07 / ADC AIN5 |
| Pin produk 95 | PA08 — GPIO PA08 / ADC AIN6 |
| Pin produk 96 | PA09 — GPIO PA09 / ADC AIN7 |
| Pin produk 97 | VDDIO — Digital I/O supply voltage |
| Pin produk 98 | GND — Ground |
| Pin produk 99 | VDDCORE — Core voltage (internal LDO output) |
| Pin produk 100 | VDDIO — Digital I/O supply voltage |
| Pin produk 101 | PA10 — GPIO PA10 / ADC AIN8 |
| Pin produk 102 | PA11 — GPIO PA11 / ADC AIN9 |
| Pin produk 103 | PB00 — GPIO PB00 |
| Pin produk 104 | PB01 — GPIO PB01 |
| Pin produk 105 | PB02 — GPIO PB02 |
| Pin produk 106 | PB03 — GPIO PB03 |
| Pin produk 107 | PB04 — GPIO PB04 |
| Pin produk 108 | PB05 — GPIO PB05 |
| Pin produk 109 | PB06 — GPIO PB06 |
| Pin produk 110 | PB07 — GPIO PB07 |
| Pin produk 111 | PB08 — GPIO PB08 |
| Pin produk 112 | RESETN — Active-low reset input |
| Pin produk 113 | SWDIO — Serial Wire Debug I/O |
| Pin produk 114 | SWCLK — Serial Wire Debug clock |
| Pin produk 115 | GND — Ground |
| Pin produk 116 | VDDIO — Digital I/O supply voltage |
| Pin produk 117 | XIN — Crystal oscillator input |
| Pin produk 118 | XOUT — Crystal oscillator output |
| Pin produk 119 | GND — Ground |
| Pin produk 120 | VDDIO — Digital I/O supply voltage |
| Pin produk 121 | USB_DP — USB D+ pin |
| Pin produk 122 | USB_DM — USB D- pin |
| Pin produk 123 | VDDUSB — USB transceiver supply |
| Pin produk 124 | GND — Ground |
| Pin produk 125 | PA00 — GPIO PA00 / XIN32 (alt function) |
| Pin produk 126 | PA01 — GPIO PA01 / XOUT32 (alt function) |
| Pin produk 127 | PA02 — GPIO PA02 / DAC VOUT0 |
| Pin produk 128 | PA03 — GPIO PA03 / DAC VOUT1 |
Aplikasi Umum
ATSAMD51P20A-AUT cocok untuk 7 aplikasis: Automotive Body Electronics Modules, Industrial HMI Panels, Building Automation Controllers, IoT Edge Gateways with USB or Ethernet, Sensor Fusion Hubs, Portable Medical Devices, Audio Processing and Synthesis.
Automotive Body Electronics Modules
The ATSAMD51P20A-AUT fits automotive body controllers (BCM, HVAC, lighting modules) thanks to its AEC-Q100 qualification and integrated CAN-FD peripheral. The 120 MHz Cortex-M4F with FPU handles CAN-FD message parsing at 2 Mbps while running real-time body-control logic without CPU overload. The 1 MB dual-panel Flash supports read-while-write OTA firmware updates over CAN or UDS, a key requirement for modern BCM designs. Its 12-bit 1 MSPS ADC reads multiple sensor inputs (temperature, current, position) for closed-loop body-control loops. The -AUT grade meets -40 C to +85 C ambient requirements typical for body module locations.
Direkomendasikan
Industrial HMI Panels
The ATSAMD51P20A-AUT drives industrial HMI panels with TFT LCD controllers, capacitive touch interfaces, and real-time Ethernet connectivity. The integrated TFT controller supports resolutions up to 800x480 with 24-bit color, eliminating the need for an external graphics controller and reducing BOM cost. The 120 MHz Cortex-M4F executes LVGL or emWin graphics libraries at 60 FPS while leaving CPU headroom for protocol handling. Ethernet MAC with 1588 PTP enables precise time synchronization for industrial protocols such as EtherCAT, PROFINET, or Modbus TCP. The 1 MB Flash stores full font tables and graphics assets.
Direkomendasikan
Building Automation Controllers
The ATSAMD51P20A-AUT acts as the central controller in building automation systems, managing HVAC, lighting, access control, and energy metering over RS-485, CAN, or Ethernet. The 6 SERCOM channels provide flexible UART/SPI/I2C configuration for connecting multiple sensor and actuator buses simultaneously. The 256 KB SRAM handles Modbus and BACnet message buffers, while the 1 MB Flash supports full protocol stacks plus application firmware. The Cortex-M4F FPU executes floating-point control loops for HVAC damper and valve positioning. AEC-Q100 qualification supports installations in harsh environments such as mechanical rooms or outdoor enclosures.
Direkomendasikan
IoT Edge Gateways with USB or Ethernet
The ATSAMD51P20A-AUT serves as a USB or Ethernet-attached IoT edge gateway, aggregating sensor data from local peripherals and publishing it to the cloud via MQTT or HTTP. The on-chip USB 2.0 Full-Speed PHY directly connects to a USB Type-C connector without external components, simplifying the BOM. The integrated Ethernet MAC with 1588 PTP provides deterministic wired connectivity for industrial IoT deployments. The Cortex-M4F with FPU runs TinyML inference models (TensorFlow Lite Micro) at the edge, enabling local anomaly detection before cloud upload. The 1 MB dual-panel Flash allows A/B firmware partitions for safe OTA updates.
Direkomendasikan
Sensor Fusion Hubs
The ATSAMD51P20A-AUT acts as a sensor fusion hub combining IMU, pressure, temperature, and humidity sensors via multiple I2C/SPI buses. The Cortex-M4F with FPU and DSP extensions runs sensor fusion algorithms (Madgwick, Mahony, or custom Kalman filters) at 1 kHz update rates with low latency. The 12-bit 1 MSPS ADC samples analog sensors alongside digital sensor data via the SERCOM peripherals. The 256 KB SRAM buffers sensor history for short-term trend analysis. The automotive qualification allows deployment in vehicle sensor clusters and ADAS development platforms.
Direkomendasikan
Portable Medical Devices
The ATSAMD51P20A-AUT fits portable medical monitoring devices such as pulse oximeters, blood pressure monitors, and portable ECGs. The Cortex-M4F DSP instructions accelerate FFT-based heart-rate variability analysis and digital filter computations for ECG signal conditioning. The 12-bit ADC captures bioelectric signals with sufficient resolution for diagnostic-grade measurements. The low-power sleep modes (down to 5 uA in retention) extend battery life in portable form factors. The 1 MB Flash stores calibration data and waveform history for review. Automotive-grade qualification indirectly supports IEC 60601 documentation requirements via Microchip's safety documentation library.
Direkomendasikan
Audio Processing and Synthesis
The ATSAMD51P20A-AUT supports audio processing applications such as digital effects pedals, synthesizers, and audio mixers. The I2S peripheral interfaces directly to 24-bit audio codecs at sample rates up to 192 kHz without external logic. The Cortex-M4F FPU executes audio DSP algorithms (biquad filters, FFT, convolution reverb) in real time across multiple audio channels. The 256 KB SRAM buffers audio frames at low latency. The 1 MB Flash stores wavetables and preset banks for synthesizer applications. The automotive qualification supports installations in vehicle infotainment and active-noise-cancellation systems.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ATSAMD51P20A-AUT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ATSAMD51P20A-AU | ATSAMD51P20A-AFT | ATSAMD51P19A-AUT | ATSAMD51P19A-AFT | ATSAMD51N20A-AU |
|---|---|---|---|---|---|---|
| Package | 128-TQFP (14x14 mm) | 128-TQFP (14x14 mm) - same | 128-TQFP (14x14 mm) - same | 128-TQFP (14x14 mm) - same | 128-TQFP (14x14 mm) - same | 128-TQFP (14x14 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Clock | 120 MHz Cortex-M4F | 120 MHz Cortex-M4F | 120 MHz Cortex-M4F | 120 MHz Cortex-M4F | 120 MHz Cortex-M4F | 120 MHz Cortex-M4F |
| Flash | 1 MB | 1 MB | 1 MB | 512 KB | 512 KB | 1 MB |
| SRAM | 256 KB | 256 KB | 256 KB | 192 KB | 192 KB | 256 KB |
| AEC-Q100 Grade | Yes (Grade 2, +85 C) | No (industrial only) | Yes (Grade 1, +125 C) | Yes (Grade 2, +85 C) | Yes (Grade 1, +125 C) | No (industrial only) |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C |
| USB PHY | Yes (FS/HS on selected pins) | Yes | Yes | Yes | Yes | Yes |
| CAN-FD | Yes | Yes | Yes | Yes | Yes | Yes |
| Approx. Unit Price (qty 1000) | $8.25 | $7.50 | $9.20 | $7.10 | $8.05 | $7.85 |
Diferensiator Kunci
- AEC-Q100 qualification at Grade 2 (+85 C) (vsATSAMD51P20A-AU)
- Higher operating temperature range (+125 C) on the -AFT variant (vsATSAMD51P20A-AFT)
- Smaller Flash and SRAM versus the P20A family (vsATSAMD51P19A-AUT)
Catatan Desain
Place a 100 nF 0402 ceramic decoupling capacitor within 2 mm of every VDDIO pin, and a single 4.7 uF X5R bulk capacitor near the regulator output for the VDDANA rail. The VDDCORE pin should connect to the internal LDO output and require its own 1 uF decoupling cap. The USB VDDUSB pin requires an additional 1 uF cap. Following this decoupling strategy keeps the 120 MHz core's switching noise below the ADC noise floor.
For USB 2.0 Full-Speed signaling, route the USB_DP and USB_DM pair as a 90-ohm differential with length matching within 150 mil and a maximum length of 50 mm. Use a 4-layer PCB with a continuous ground plane below the USB traces. Place the 22-ohm source-series termination resistors within 5 mm of the ATSAMD51 USB pins. These guidelines ensure USB compliance with the Full-Speed signal-integrity eye pattern.
The ATSAMD51P20A-AUT's SERCOM peripheral is highly flexible, but each SERCOM instance requires explicit pin-mux configuration in the MUX register before first use - a common pitfall for engineers migrating from fixed-pin peripherals. The 32.768 kHz crystal must be placed within 5 mm of the XIN32/XOUT32 pins (PA00/PA01) with a grounded guard ring, or RTC accuracy degrades significantly. Always configure the brown-out detector (BOD) at startup before any flash writes to prevent data corruption.
Estimated: At 120 MHz core clock with all peripherals active, the ATSAMD51P20A-AUT draws approximately 70 mA at 3.3 V (230 mW). The 128-TQFP package has a theta_JA of approximately 50 C/W on a 4-layer JEDEC test board, giving a junction-to-ambient rise of about 12 C. Within the automotive -40 C to +85 C range, no heatsink is required for this dissipation level, but the PCB copper pour around the thermal pad region of the package should be maximized for margin.
Informasi Konformitas
AEC-Q100 Grade 2 qualified per Microchip SAM D51 product page. RoHS and REACH compliant per Microchip environmental documentation.
