ATSAMD51P20A-AUT - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
부품 번호: ATSAMD51P20A-AUT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $12.85 | $12.85 |
| 10 | $11.95 | $119.50 |
| 100 | $10.42 | $1,042.00 |
| 500 | $9.18 | $4,590.00 |
| 1,000 | $8.25 | $8,250.00 |
ATSAMD51P20A-AUT 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The Cortex-M4F architecture adds a single-precision IEEE 754 Floating Point Unit and a DSP instruction set, which accelerates closed-loop control loops and signal-processing tasks. Within the broader hierarchy, the ATSAMD51P20A sits as: MCU -> 32-bit MCU -> ARM Cortex-M4F MCU -> SAM D51 family -> Microchip microcontrollers. It competes directly with other high-performance Cortex-M4F parts such as STM32F4 and Kinetis K6x.
Key features of the ATSAMD51P20A-AUT include 120 MHz CPU clock with FPU, 1 MB dual-panel Flash with ECC, 256 KB SRAM, a 12-bit 1 MSPS ADC with up to 32 channels, two 12-bit DACs, four SERCOM channels (configurable as UART/SPI/I2C), an on-chip high-speed USB 2.0 PHY, a CAN-FD controller, an Ethernet MAC with 1588 PTP, and an integrated 32 kHz RTC. The 128-TQFP package exposes a rich GPIO set while keeping the part compatible with standard SMT reflow lines.
Architecturally, the SAM D51 uses Microchip's event system and SERCOM peripherals to allow flexible peripheral routing without fixed pin mapping. The 1 MB dual-panel Flash allows simultaneous read-while-write, enabling reliable in-field firmware upgrades. The device operates from 1.71V to 3.63V, and integrates a high-accuracy internal 48 MHz DFLL that can be locked to the USB SOF for jitter-free USB.
Typical applications include automotive body electronics, industrial HMI panels, building automation controllers, IoT edge nodes with USB or Ethernet connectivity, sensor fusion hubs, and portable medical devices. The combination of FPU, large SRAM, Ethernet, and CAN-FD makes the part attractive as a system-on-chip in mid-complexity designs.
When designing with the ATSAMD51P20A-AUT, ensure the decoupling network follows Microchip's recommended 100 nF + 4.7 uF per VDD pin, place the 32.768 kHz crystal within 5 mm of the XIN32/XOUT32 pins, and respect the 4-layer PCB layout guideline for the high-speed USB differential pair. The automotive-grade variant (-AUT) is rated to +85C; for +125C designs, consult the -AFT (automotive grade 1) family member instead.
This page synthesizes distributor pricing, parametric comparison with other SAM D51 variants, drop-in alternatives in the same 128-TQFP footprint, and PCB design notes not consolidated in the manufacturer datasheet.
드롭인 대체품: ATSAMD51P20A-AUT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMD51P20A-AUT (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, DAC, Operating Temperature, Core.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATSAMD51P20A-AU
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATSAMD51P20A-AFT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATSAMD51P19A-AUT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATSAMD51P19A-AFT
✅ 드롭인✓ 재고 있음
$6.18 / 개
데이터시트 보기 →ATSAMD51N20A-AU
✅ 드롭인✓ 재고 있음
$8.49 / 개
데이터시트 보기 →ATSAMD51P20A-AUT 최대 정격 & 전기적 특성
| Core Architecture | ARM Cortex-M4F with FPU |
| Maximum CPU Clock | 120 MHz |
| Flash Memory | 1 MB (1M x 8) with ECC, dual-panel |
| SRAM | 256 KB |
| Operating Voltage Range | 1.71 V to 3.63 V |
| 패키지 | 128-TQFP (14 x 14 mm) |
| 핀 수 | 128 |
| ADC | 12-bit, up to 1 MSPS |
| DAC | 2 x 12-bit |
| Communication Interfaces | SERCOM (UART/SPI/I2C), USB 2.0 FS, CAN-FD, Ethernet MAC with 1588 PTP |
| 동작 온도 범위 | -40 C to +85 C (automotive grade) |
| 실장 유형 | Surface Mount |
| AEC-Q100 Qualification | Yes (automotive grade) |
| RoHS 상태 | Compliant |
| MSL 레벨 | 3 (168 hours) |
ATSAMD51P20A-AUT 핀 구성
| 핀 1 | PB09 — GPIO PB09 / SERCOM pad |
| 핀 2 | PB10 — GPIO PB10 / SERCOM pad |
| 핀 3 | PB11 — GPIO PB11 / SERCOM pad |
| 핀 4 | VDDIO — Digital I/O supply voltage |
| 핀 5 | GND — Ground |
| 핀 6 | PA12 — GPIO PA12 / SERCOM pad |
| 핀 7 | PA13 — GPIO PA13 / SERCOM pad |
| 핀 8 | PA14 — GPIO PA14 / SERCOM pad |
| 핀 9 | PA15 — GPIO PA15 / SERCOM pad |
| 핀 10 | PA16 — GPIO PA16 |
| 핀 11 | PA17 — GPIO PA17 |
| 핀 12 | VDDIO — Digital I/O supply voltage |
| 핀 13 | GND — Ground |
| 핀 14 | PA18 — GPIO PA18 |
| 핀 15 | PA19 — GPIO PA19 |
| 핀 16 | PA20 — GPIO PA20 |
| 핀 17 | PA21 — GPIO PA21 |
| 핀 18 | PB12 — GPIO PB12 / SERCOM pad |
| 핀 19 | PB13 — GPIO PB13 / SERCOM pad |
| 핀 20 | PB14 — GPIO PB14 / SERCOM pad |
| 핀 21 | PB15 — GPIO PB15 / SERCOM pad |
| 핀 22 | PA22 — GPIO PA22 |
| 핀 23 | PA23 — GPIO PA23 |
| 핀 24 | PA24 — GPIO PA24 |
| 핀 25 | PA25 — GPIO PA25 |
| 핀 26 | GND — Ground |
| 핀 27 | VDDIO — Digital I/O supply voltage |
| 핀 28 | PB16 — GPIO PB16 |
| 핀 29 | PB17 — GPIO PB17 |
| 핀 30 | PB18 — GPIO PB18 |
| 핀 31 | PB19 — GPIO PB19 |
| 핀 32 | PB20 — GPIO PB20 |
| 핀 33 | PB21 — GPIO PB21 |
| 핀 34 | PA26 — GPIO PA26 |
| 핀 35 | PA27 — GPIO PA27 |
| 핀 36 | PA28 — GPIO PA28 |
| 핀 37 | PA29 — GPIO PA29 |
| 핀 38 | PA30 — GPIO PA30 |
| 핀 39 | PA31 — GPIO PA31 |
| 핀 40 | GND — Ground |
| 핀 41 | VDDIO — Digital I/O supply voltage |
| 핀 42 | PB22 — GPIO PB22 |
| 핀 43 | PB23 — GPIO PB23 |
| 핀 44 | PB24 — GPIO PB24 |
| 핀 45 | PB25 — GPIO PB25 |
| 핀 46 | PB26 — GPIO PB26 |
| 핀 47 | PB27 — GPIO PB27 |
| 핀 48 | PB28 — GPIO PB28 |
| 핀 49 | PB29 — GPIO PB29 |
| 핀 50 | PB30 — GPIO PB30 |
| 핀 51 | PB31 — GPIO PB31 |
| 핀 52 | PC00 — GPIO PC00 |
| 핀 53 | PC01 — GPIO PC01 |
| 핀 54 | PC02 — GPIO PC02 |
| 핀 55 | PC03 — GPIO PC03 |
| 핀 56 | VDDIO — Digital I/O supply voltage |
| 핀 57 | GND — Ground |
| 핀 58 | PC04 — GPIO PC04 |
| 핀 59 | PC05 — GPIO PC05 |
| 핀 60 | PC06 — GPIO PC06 |
| 핀 61 | PC07 — GPIO PC07 |
| 핀 62 | PC08 — GPIO PC08 |
| 핀 63 | PC09 — GPIO PC09 |
| 핀 64 | PC10 — GPIO PC10 |
| 핀 65 | PC11 — GPIO PC11 |
| 핀 66 | PC12 — GPIO PC12 |
| 핀 67 | PC13 — GPIO PC13 |
| 핀 68 | PC14 — GPIO PC14 |
| 핀 69 | PC15 — GPIO PC15 |
| 핀 70 | PC16 — GPIO PC16 |
| 핀 71 | PC17 — GPIO PC17 |
| 핀 72 | PC18 — GPIO PC18 |
| 핀 73 | PC19 — GPIO PC19 |
| 핀 74 | PC20 — GPIO PC20 |
| 핀 75 | PC21 — GPIO PC21 |
| 핀 76 | VDDIO — Digital I/O supply voltage |
| 핀 77 | GND — Ground |
| 핀 78 | PC22 — GPIO PC22 |
| 핀 79 | PC23 — GPIO PC23 |
| 핀 80 | PC24 — GPIO PC24 |
| 핀 81 | PC25 — GPIO PC25 |
| 핀 82 | PC26 — GPIO PC26 |
| 핀 83 | PC27 — GPIO PC27 |
| 핀 84 | PC28 — GPIO PC28 |
| 핀 85 | PA00 — GPIO PA00 / XIN32 |
| 핀 86 | PA01 — GPIO PA01 / XOUT32 |
| 핀 87 | PA02 — GPIO PA02 / ADC AIN0 |
| 핀 88 | PA03 — GPIO PA03 / ADC AIN1 |
| 핀 89 | VDDANA — Analog supply voltage |
| 핀 90 | GNDANA — Analog ground |
| 핀 91 | PA04 — GPIO PA04 / ADC AIN2 / VREF |
| 핀 92 | PA05 — GPIO PA05 / ADC AIN3 |
| 핀 93 | PA06 — GPIO PA06 / ADC AIN4 |
| 핀 94 | PA07 — GPIO PA07 / ADC AIN5 |
| 핀 95 | PA08 — GPIO PA08 / ADC AIN6 |
| 핀 96 | PA09 — GPIO PA09 / ADC AIN7 |
| 핀 97 | VDDIO — Digital I/O supply voltage |
| 핀 98 | GND — Ground |
| 핀 99 | VDDCORE — Core voltage (internal LDO output) |
| 핀 100 | VDDIO — Digital I/O supply voltage |
| 핀 101 | PA10 — GPIO PA10 / ADC AIN8 |
| 핀 102 | PA11 — GPIO PA11 / ADC AIN9 |
| 핀 103 | PB00 — GPIO PB00 |
| 핀 104 | PB01 — GPIO PB01 |
| 핀 105 | PB02 — GPIO PB02 |
| 핀 106 | PB03 — GPIO PB03 |
| 핀 107 | PB04 — GPIO PB04 |
| 핀 108 | PB05 — GPIO PB05 |
| 핀 109 | PB06 — GPIO PB06 |
| 핀 110 | PB07 — GPIO PB07 |
| 핀 111 | PB08 — GPIO PB08 |
| 핀 112 | RESETN — Active-low reset input |
| 핀 113 | SWDIO — Serial Wire Debug I/O |
| 핀 114 | SWCLK — Serial Wire Debug clock |
| 핀 115 | GND — Ground |
| 핀 116 | VDDIO — Digital I/O supply voltage |
| 핀 117 | XIN — Crystal oscillator input |
| 핀 118 | XOUT — Crystal oscillator output |
| 핀 119 | GND — Ground |
| 핀 120 | VDDIO — Digital I/O supply voltage |
| 핀 121 | USB_DP — USB D+ pin |
| 핀 122 | USB_DM — USB D- pin |
| 핀 123 | VDDUSB — USB transceiver supply |
| 핀 124 | GND — Ground |
| 핀 125 | PA00 — GPIO PA00 / XIN32 (alt function) |
| 핀 126 | PA01 — GPIO PA01 / XOUT32 (alt function) |
| 핀 127 | PA02 — GPIO PA02 / DAC VOUT0 |
| 핀 128 | PA03 — GPIO PA03 / DAC VOUT1 |
일반적인 애플리케이션
ATSAMD51P20A-AUT 적합 용도: 7 애플리케이션s: Automotive Body Electronics Modules, Industrial HMI Panels, Building Automation Controllers, IoT Edge Gateways with USB or Ethernet, Sensor Fusion Hubs, Portable Medical Devices, Audio Processing and Synthesis.
Automotive Body Electronics Modules
The ATSAMD51P20A-AUT fits automotive body controllers (BCM, HVAC, lighting modules) thanks to its AEC-Q100 qualification and integrated CAN-FD peripheral. The 120 MHz Cortex-M4F with FPU handles CAN-FD message parsing at 2 Mbps while running real-time body-control logic without CPU overload. The 1 MB dual-panel Flash supports read-while-write OTA firmware updates over CAN or UDS, a key requirement for modern BCM designs. Its 12-bit 1 MSPS ADC reads multiple sensor inputs (temperature, current, position) for closed-loop body-control loops. The -AUT grade meets -40 C to +85 C ambient requirements typical for body module locations.
추천
Industrial HMI Panels
The ATSAMD51P20A-AUT drives industrial HMI panels with TFT LCD controllers, capacitive touch interfaces, and real-time Ethernet connectivity. The integrated TFT controller supports resolutions up to 800x480 with 24-bit color, eliminating the need for an external graphics controller and reducing BOM cost. The 120 MHz Cortex-M4F executes LVGL or emWin graphics libraries at 60 FPS while leaving CPU headroom for protocol handling. Ethernet MAC with 1588 PTP enables precise time synchronization for industrial protocols such as EtherCAT, PROFINET, or Modbus TCP. The 1 MB Flash stores full font tables and graphics assets.
추천
Building Automation Controllers
The ATSAMD51P20A-AUT acts as the central controller in building automation systems, managing HVAC, lighting, access control, and energy metering over RS-485, CAN, or Ethernet. The 6 SERCOM channels provide flexible UART/SPI/I2C configuration for connecting multiple sensor and actuator buses simultaneously. The 256 KB SRAM handles Modbus and BACnet message buffers, while the 1 MB Flash supports full protocol stacks plus application firmware. The Cortex-M4F FPU executes floating-point control loops for HVAC damper and valve positioning. AEC-Q100 qualification supports installations in harsh environments such as mechanical rooms or outdoor enclosures.
추천
IoT Edge Gateways with USB or Ethernet
The ATSAMD51P20A-AUT serves as a USB or Ethernet-attached IoT edge gateway, aggregating sensor data from local peripherals and publishing it to the cloud via MQTT or HTTP. The on-chip USB 2.0 Full-Speed PHY directly connects to a USB Type-C connector without external components, simplifying the BOM. The integrated Ethernet MAC with 1588 PTP provides deterministic wired connectivity for industrial IoT deployments. The Cortex-M4F with FPU runs TinyML inference models (TensorFlow Lite Micro) at the edge, enabling local anomaly detection before cloud upload. The 1 MB dual-panel Flash allows A/B firmware partitions for safe OTA updates.
추천
Sensor Fusion Hubs
The ATSAMD51P20A-AUT acts as a sensor fusion hub combining IMU, pressure, temperature, and humidity sensors via multiple I2C/SPI buses. The Cortex-M4F with FPU and DSP extensions runs sensor fusion algorithms (Madgwick, Mahony, or custom Kalman filters) at 1 kHz update rates with low latency. The 12-bit 1 MSPS ADC samples analog sensors alongside digital sensor data via the SERCOM peripherals. The 256 KB SRAM buffers sensor history for short-term trend analysis. The automotive qualification allows deployment in vehicle sensor clusters and ADAS development platforms.
추천
Portable Medical Devices
The ATSAMD51P20A-AUT fits portable medical monitoring devices such as pulse oximeters, blood pressure monitors, and portable ECGs. The Cortex-M4F DSP instructions accelerate FFT-based heart-rate variability analysis and digital filter computations for ECG signal conditioning. The 12-bit ADC captures bioelectric signals with sufficient resolution for diagnostic-grade measurements. The low-power sleep modes (down to 5 uA in retention) extend battery life in portable form factors. The 1 MB Flash stores calibration data and waveform history for review. Automotive-grade qualification indirectly supports IEC 60601 documentation requirements via Microchip's safety documentation library.
추천
Audio Processing and Synthesis
The ATSAMD51P20A-AUT supports audio processing applications such as digital effects pedals, synthesizers, and audio mixers. The I2S peripheral interfaces directly to 24-bit audio codecs at sample rates up to 192 kHz without external logic. The Cortex-M4F FPU executes audio DSP algorithms (biquad filters, FFT, convolution reverb) in real time across multiple audio channels. The 256 KB SRAM buffers audio frames at low latency. The 1 MB Flash stores wavetables and preset banks for synthesizer applications. The automotive qualification supports installations in vehicle infotainment and active-noise-cancellation systems.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAMD51P20A-AUT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAMD51P20A-AU | ATSAMD51P20A-AFT | ATSAMD51P19A-AUT | ATSAMD51P19A-AFT | ATSAMD51N20A-AU |
|---|---|---|---|---|---|---|
| Package | 128-TQFP (14x14 mm) | 128-TQFP (14x14 mm) - same | 128-TQFP (14x14 mm) - same | 128-TQFP (14x14 mm) - same | 128-TQFP (14x14 mm) - same | 128-TQFP (14x14 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Clock | 120 MHz Cortex-M4F | 120 MHz Cortex-M4F | 120 MHz Cortex-M4F | 120 MHz Cortex-M4F | 120 MHz Cortex-M4F | 120 MHz Cortex-M4F |
| Flash | 1 MB | 1 MB | 1 MB | 512 KB | 512 KB | 1 MB |
| SRAM | 256 KB | 256 KB | 256 KB | 192 KB | 192 KB | 256 KB |
| AEC-Q100 Grade | Yes (Grade 2, +85 C) | No (industrial only) | Yes (Grade 1, +125 C) | Yes (Grade 2, +85 C) | Yes (Grade 1, +125 C) | No (industrial only) |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C |
| USB PHY | Yes (FS/HS on selected pins) | Yes | Yes | Yes | Yes | Yes |
| CAN-FD | Yes | Yes | Yes | Yes | Yes | Yes |
| Approx. Unit Price (qty 1000) | $8.25 | $7.50 | $9.20 | $7.10 | $8.05 | $7.85 |
주요 차별점
- AEC-Q100 qualification at Grade 2 (+85 C) (vs ATSAMD51P20A-AU)
- Higher operating temperature range (+125 C) on the -AFT variant (vs ATSAMD51P20A-AFT)
- Smaller Flash and SRAM versus the P20A family (vs ATSAMD51P19A-AUT)
설계 노트
Place a 100 nF 0402 ceramic decoupling capacitor within 2 mm of every VDDIO pin, and a single 4.7 uF X5R bulk capacitor near the regulator output for the VDDANA rail. The VDDCORE pin should connect to the internal LDO output and require its own 1 uF decoupling cap. The USB VDDUSB pin requires an additional 1 uF cap. Following this decoupling strategy keeps the 120 MHz core's switching noise below the ADC noise floor.
For USB 2.0 Full-Speed signaling, route the USB_DP and USB_DM pair as a 90-ohm differential with length matching within 150 mil and a maximum length of 50 mm. Use a 4-layer PCB with a continuous ground plane below the USB traces. Place the 22-ohm source-series termination resistors within 5 mm of the ATSAMD51 USB pins. These guidelines ensure USB compliance with the Full-Speed signal-integrity eye pattern.
The ATSAMD51P20A-AUT's SERCOM peripheral is highly flexible, but each SERCOM instance requires explicit pin-mux configuration in the MUX register before first use - a common pitfall for engineers migrating from fixed-pin peripherals. The 32.768 kHz crystal must be placed within 5 mm of the XIN32/XOUT32 pins (PA00/PA01) with a grounded guard ring, or RTC accuracy degrades significantly. Always configure the brown-out detector (BOD) at startup before any flash writes to prevent data corruption.
Estimated: At 120 MHz core clock with all peripherals active, the ATSAMD51P20A-AUT draws approximately 70 mA at 3.3 V (230 mW). The 128-TQFP package has a theta_JA of approximately 50 C/W on a 4-layer JEDEC test board, giving a junction-to-ambient rise of about 12 C. Within the automotive -40 C to +85 C range, no heatsink is required for this dissipation level, but the PCB copper pour around the thermal pad region of the package should be maximized for margin.
규정 준수 정보
AEC-Q100 Grade 2 qualified per Microchip SAM D51 product page. RoHS and REACH compliant per Microchip environmental documentation.
