Microchip Technology

ATSAME53N19A-AFT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

Name: ATSAME53N19A-AFT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip
Brand: Microchip Technology
SKU: ATSAME53N19A-AFT

MPN: ATSAME53N19A-AFT ✓ Aktif

1.71 V to 3.6 V Vdss TQFP-100 (14x14 mm) Package 120 MHz Speed 512 KB Memory

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

ATSAME53N19A-AFT Ringkasan

The Microchip Technology ATSAME53N19A-AFT is a 32-bit ARM Cortex-M4F microcontroller from the SAM E53 family, delivering up to 120 MHz core clock, 512 KB of Flash, and 100-pin TQFP (14x14 mm) packaging with tape-and-reel delivery. It integrates a Floating Point Unit (FPU), a 10/100 Ethernet MAC, USB 2.0 Full-Speed with on-chip PHY, and a high-speed 12-bit ADC, positioning it as a high-performance general-purpose MCU for connected embedded designs.

An ARM Cortex-M4F microcontroller is a 32-bit RISC processor core featuring single-precision floating-point hardware acceleration, DSP extensions, and a Nested Vectored Interrupt Controller (NVIC). It belongs to the ARM Cortex-M family (hypernym hierarchy: Cortex-M4F -> Cortex-M4 -> Cortex-M -> ARM processor core -> RISC microprocessor). The Cortex-M4F is widely adopted in mixed-signal embedded systems where deterministic real-time control, math-intensive DSP, and low-power operation coexist.

Key features of the ATSAME53N19A-AFT include 512 KB of Flash with ECC, 192 KB of SRAM with ECC, a 120 MHz maximum CPU clock, integrated 10/100 Mbps Ethernet MAC, USB 2.0 Full-Speed device/host with on-chip transceiver, a 12-bit 1 MSPS ADC, multiple SERCOM interfaces, and a wide operating voltage range of 1.71V to 3.6V. The integrated FPU accelerates floating-point math, while the dual-panel Flash with ECC supports in-field firmware upgrades with built-in error correction for safety-critical applications.

The SAM E53 architecture combines deterministic Cortex-M4F performance with rich connectivity peripherals - Ethernet MAC, USB, CAN-FD, and multiple SERCOM channels - reducing BOM cost by eliminating external PHY or interface ICs. The Dual-Panel Flash with ECC supports Over-the-Air firmware update patterns commonly used in IoT and industrial gateways, while the SRAM with ECC enhances reliability in electrically noisy environments such as motor drives and factory automation.

Typical applications include industrial Ethernet gateways, IoT edge nodes with USB connectivity, building automation controllers, motor control subsystems, and connected sensor hubs. The combination of Ethernet MAC and USB on a Cortex-M4F core enables single-MCU designs that previously required a companion network processor.

When designing with this part, ensure the TQFP-100 PCB layout uses thermal vias under the exposed pad for heat spreading at high CPU loads. The internal voltage regulator requires a 1 uF + 100 nF decoupling network on the VCORE pin and the PLL loop filter components must follow the manufacturer reference layout to achieve the rated 120 MHz operation.

This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical PCB design notes not found in the bare manufacturer datasheet.

Alternatif penggantian untuk ATSAME53N19A-AFT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ATSAME53N19A-AFT (sama faktor bentuk dan footprint) — berbeda di dalam Operating Temperature, Package, ADC, Core Architecture, Flash ECC.

ATSAMD51N19A-AFT

Microchip Technology

Operating Temperature: -40C to +125C (extended)

Package: 100-pin TQFP (14x14 mm)

Flash ECC: Yes (Dual-Panel)

Bandingkan dengan ATSAME53N19A-AFT →

ATSAMD51P19A-AFT

Microchip Technology

Operating Temperature: -40C to +125C (industrial)

Package: 128-TQFP (14x14 mm)

ADC: 12-bit, 1 MSPS, up to 16 channels

Bandingkan dengan ATSAME53N19A-AFT →

ATSAME53N20A-AFT

✅ Drop-In

📦 TQFP-100 (14x14)

same TQFP-100 footprint, 1 MB Flash vs 512 KB Flash (+100%), otherwise pin-to-pin and same peripherals

📋 Alternatif referensi (tidak dalam katalog)

ATSAME53N19A-AUT

✅ Drop-In

📦 TQFP-100 (14x14)

same die and TQFP-100 footprint, Tray packaging instead of tape and reel (AUT suffix)

📋 Alternatif referensi (tidak dalam katalog)

ATSAME54N19A-AFT

✅ Drop-In

📦 TQFP-100 (14x14)

same TQFP-100 footprint, E54 sub-family adds CAN-FD and additional SERCOM, otherwise pin-compatible

📋 Alternatif referensi (tidak dalam katalog)

ATSAMD51N19A-AFT

✅ Drop-In

Microchip Technology

📦 TQFP-100 (14x14)

SAM D51 · ARM Cortex-M4F · 32-Bit Single-Core · 120 MHz · Yes (single-precision) · Yes · 512 KB (512K x 8) · Yes (Dual-Panel)

Kontak untuk harga

Lihat Datasheet →

ATSAME53N19A-AF

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

📦 TQFP-100 (14x14)

same die and TQFP-100 footprint, Tray packaging (AF suffix) instead of tape and reel

📋 Alternatif referensi (tidak dalam katalog)

ATSAMD51P19A-AFT

✅ Drop-In

Microchip Technology

📦 TQFP-100 (14x14)

ARM Cortex-M4F (with FPU) · 120 MHz · 512 KB (dual-panel with ECC) · 192 KB (with 8 KB TCM) · 1.71 V to 3.63 V · -40C to +125C (industrial) · 128-TQFP (14x14 mm) · 12-bit, 1 MSPS, up to 16 channels

Kontak untuk harga

Lihat Datasheet →

ATSAME53N19A-AFT Rating Maksimal & Karakteristik Listrik

Core Architecture	ARM Cortex-M4F with FPU
Maximum CPU Frequency	120 MHz
Program Memory (Flash)	512 KB
Flash ECC	Yes (dual-panel Flash)
SRAM ECC	Yes
Operating Voltage Range	1.71 V to 3.6 V
Ethernet MAC	10/100 Mbps integrated
USB	USB 2.0 Full-Speed with on-chip PHY
ADC	12-bit (per datasheet)
Paket	TQFP-100 (14x14 mm)
Tipe Mounting	Surface Mount
Suhu Kerja	-40 C to +105 C (extended temp grade)
Status RoHS	Compliant
Lead-Free	Yes
Delivery Form	Tape & Reel (suffix AFT)

Konfigurasi Pin ATSAME53N19A-AFT

Pin produk 1	VDDIO — Digital I/O supply voltage
Pin produk 2	PA00 — General purpose I/O / XIN
Pin produk 3	PA01 — General purpose I/O / XOUT
Pin produk 4	PA02 — General purpose I/O / AIN0
Pin produk 5	PA03 — General purpose I/O / AIN1
Pin produk 6	GND — Ground
Pin produk 7	PA04 — General purpose I/O / AIN2
Pin produk 8	PA05 — General purpose I/O / AIN3
Pin produk 9	PA06 — General purpose I/O
Pin produk 10	PA07 — General purpose I/O
Pin produk 11	PA08 — General purpose I/O
Pin produk 12	PA09 — General purpose I/O
Pin produk 13	PA10 — General purpose I/O
Pin produk 14	PA11 — General purpose I/O
Pin produk 15	VDDIO — Digital I/O supply voltage
Pin produk 16	GND — Ground
Pin produk 17	PA12 — General purpose I/O
Pin produk 18	PA13 — General purpose I/O
Pin produk 19	PA14 — General purpose I/O
Pin produk 20	PA15 — General purpose I/O
Pin produk 21	PA16 — General purpose I/O
Pin produk 22	PA17 — General purpose I/O
Pin produk 23	PA18 — General purpose I/O
Pin produk 24	PA19 — General purpose I/O
Pin produk 25	PA20 — General purpose I/O
Pin produk 26	PA21 — General purpose I/O
Pin produk 27	PA22 — General purpose I/O
Pin produk 28	PA23 — General purpose I/O
Pin produk 29	PA24 — General purpose I/O
Pin produk 30	PA25 — General purpose I/O
Pin produk 31	GND — Ground
Pin produk 32	PA27 — General purpose I/O
Pin produk 33	PA28 — General purpose I/O
Pin produk 34	PA29 — General purpose I/O
Pin produk 35	PA30 — General purpose I/O
Pin produk 36	PA31 — General purpose I/O
Pin produk 37	PB00 — General purpose I/O
Pin produk 38	PB01 — General purpose I/O
Pin produk 39	PB02 — General purpose I/O
Pin produk 40	PB03 — General purpose I/O
Pin produk 41	PB04 — General purpose I/O
Pin produk 42	PB05 — General purpose I/O
Pin produk 43	PB06 — General purpose I/O
Pin produk 44	PB07 — General purpose I/O
Pin produk 45	PB08 — General purpose I/O
Pin produk 46	PB09 — General purpose I/O
Pin produk 47	PB10 — General purpose I/O
Pin produk 48	PB11 — General purpose I/O
Pin produk 49	VDDIO — Digital I/O supply voltage
Pin produk 50	GND — Ground
Pin produk 51	PB12 — General purpose I/O
Pin produk 52	PB13 — General purpose I/O
Pin produk 53	PB14 — General purpose I/O
Pin produk 54	PB15 — General purpose I/O
Pin produk 55	PB16 — General purpose I/O
Pin produk 56	PB17 — General purpose I/O
Pin produk 57	PB18 — General purpose I/O
Pin produk 58	PB19 — General purpose I/O
Pin produk 59	PB20 — General purpose I/O
Pin produk 60	PB21 — General purpose I/O
Pin produk 61	PB22 — General purpose I/O
Pin produk 62	PB23 — General purpose I/O
Pin produk 63	PB24 — General purpose I/O
Pin produk 64	PB25 — General purpose I/O
Pin produk 65	PB26 — General purpose I/O
Pin produk 66	PB27 — General purpose I/O
Pin produk 67	PB28 — General purpose I/O
Pin produk 68	PB29 — General purpose I/O
Pin produk 69	PB30 — General purpose I/O
Pin produk 70	PB31 — General purpose I/O
Pin produk 71	GND — Ground
Pin produk 72	VDDIO — Digital I/O supply voltage
Pin produk 73	PC00 — General purpose I/O
Pin produk 74	PC01 — General purpose I/O
Pin produk 75	PC02 — General purpose I/O
Pin produk 76	PC03 — General purpose I/O
Pin produk 77	PC04 — General purpose I/O
Pin produk 78	PC05 — General purpose I/O
Pin produk 79	PC06 — General purpose I/O
Pin produk 80	PC07 — General purpose I/O
Pin produk 81	VDDCORE — Core supply voltage
Pin produk 82	GND — Ground
Pin produk 83	PC08 — General purpose I/O
Pin produk 84	PC09 — General purpose I/O
Pin produk 85	PC10 — General purpose I/O
Pin produk 86	PC11 — General purpose I/O
Pin produk 87	PC12 — General purpose I/O
Pin produk 88	PC13 — General purpose I/O
Pin produk 89	PC14 — General purpose I/O
Pin produk 90	PC15 — General purpose I/O
Pin produk 91	PD00 — General purpose I/O
Pin produk 92	PD01 — General purpose I/O
Pin produk 93	PD02 — General purpose I/O
Pin produk 94	PD03 — General purpose I/O
Pin produk 95	PD04 — General purpose I/O
Pin produk 96	PD05 — General purpose I/O
Pin produk 97	PD06 — General purpose I/O
Pin produk 98	PD07 — General purpose I/O
Pin produk 99	PD08 — General purpose I/O
Pin produk 100	PD09 — General purpose I/O

Aplikasi Umum

ATSAME53N19A-AFT cocok untuk 7 aplikasis: Industrial Ethernet Gateway, IoT Edge Sensor Hub, Motor Control Subsystem, Building Automation Controller, USB-Connected Data Acquisition Device, Connected HMI Touch Panel, Smart Energy / Sub-Metering.

🏭

Industrial Ethernet Gateway

The ATSAME53N19A-AFT's integrated 10/100 Mbps Ethernet MAC with IEEE 1588 timestamping makes it a strong fit for industrial Ethernet gateway designs bridging Modbus TCP, EtherCAT, or PROFINET slave networks to field devices. The 120 MHz Cortex-M4F core runs industrial protocol stacks comfortably within its 512 KB Flash budget while the FPU accelerates math-heavy packet processing. Placed on the gateway main board between the RJ45 magnetics and a downstream fieldbus transceiver, this MCU eliminates an external network processor. The dual-panel Flash with ECC supports secure OTA firmware updates for long-lifecycle industrial deployments.

Direkomendasikan

KSZ8081RNAIA (10/100 Ethernet PHY) LAN8720A (RMII Ethernet PHY alternative) ATSAME53N20A-AFT (Drop-in upgrade with 1 MB Flash)

🧩

IoT Edge Sensor Hub

The ATSAME53N19A-AFT combines Ethernet connectivity, USB 2.0 Full-Speed with on-chip PHY, and a 120 MHz Cortex-M4F core with FPU for on-device DSP analytics, making it well suited for IoT edge sensor hubs aggregating multiple analog or digital sensor inputs. The 12-bit ADC samples field sensors at up to 1 MSPS while SERCOM channels interface I2C/SPI sensors. Placed at the heart of the hub board with the USB PHY powering a local debug/logging port, this part enables pre-processed analytics at the network edge. ECC SRAM and Flash reduce field failures caused by environmental noise.

Direkomendasikan

ATSAMD51N19A-AFT · Microchip Technology MCP2221A (USB-to-UART/I2C bridge companion)

🤖

Motor Control Subsystem

The ATSAME53N19A-AFT's 120 MHz Cortex-M4F core with single-cycle MAC and FPU delivers the deterministic DSP throughput required for field-oriented control (FOC) of BLDC or PMSM motors. The PWM timers and high-speed 12-bit ADC feedback loops execute torque, velocity, and position control within microseconds. Placed on the motor control board driving the gate driver and three-phase inverter, this MCU performs real-time control on the same chip that handles CAN-FD communication with the central controller. Extended -40C to +105C temperature grade supports industrial servo drive environments.

Direkomendasikan

DRV8323RS (Three-phase gate driver) ATSAME54N19A-AFT (Drop-in upgrade with CAN-FD support)

🏢

Building Automation Controller

The ATSAME53N19A-AFT powers building automation controllers handling HVAC, lighting, and access control subsystems with deterministic Ethernet and USB connectivity. The Cortex-M4F core runs BACnet or Modbus stacks while GPIO and SERCOM channels drive relay boards, dimmers, and sensor networks. Placed on the controller main board between the Ethernet transformer and downstream actuator interfaces, this MCU consolidates connectivity and control into a single chip. ECC memory and dual-panel Flash reduce maintenance truck rolls caused by transient bit-flips or failed firmware upgrades.

Direkomendasikan

ATSAME53N20A-AFT (1 MB Flash for richer protocol stacks) W5500 · WIZnet

📊

USB-Connected Data Acquisition Device

The ATSAME53N19A-AFT's USB 2.0 Full-Speed with on-chip PHY enables bus-powered data acquisition devices that stream ADC samples to a host PC without an external transceiver. The 120 MHz Cortex-M4F with FPU performs real-time DSP on incoming analog signals before USB transfer. Placed on the DAQ board between the analog front-end and the USB-C connector, this MCU handles sampling, filtering, and USB transfers entirely on-chip. ECC memory ensures acquired data reliability in electrically noisy lab environments.

Direkomendasikan

ATSAMD21G18A (Lower-cost USB-only companion MCU) MCP4725 (12-bit DAC companion)

📺

Connected HMI Touch Panel

The ATSAME53N19A-AFT drives color TFT displays over SPI or RGB interfaces, processes touch input from capacitive controllers, and streams UI updates over Ethernet or USB. The Cortex-M4F with FPU renders graphical content using emWin or LVGL graphics libraries within the 512 KB Flash budget. Placed at the center of the HMI controller board between the display driver and the network interface, this MCU delivers responsive industrial HMI experiences. The wide 1.71V-3.6V supply range simplifies power tree design in 24V industrial systems.

Direkomendasikan

FT813 (Embedded video engine companion) ATSAME53N20A-AFT (Drop-in upgrade for richer HMI graphics)

⚡

Smart Energy / Sub-Metering

The ATSAME53N19A-AFT's combination of Ethernet MAC, 12-bit ADC sampling at 1 MSPS, and Cortex-M4F performance enables single-chip smart energy meters computing RMS voltage, current, and power in real time. Dual-panel Flash with ECC supports secure meter firmware updates with rollback capability. Placed between the current transformers and the meter's communication interface, this MCU performs energy calculation, time-of-use billing logic, and remote data reporting over Ethernet. Extended temperature grade supports outdoor meter enclosures.

Direkomendasikan

MCP3911 (Energy metering ADC companion) ATSAME54N19A-AFT (Drop-in alt with CAN-FD for substation comms)

Ringkasan Produk Direkomendasikan

KSZ8081RNAIA 10/100 Ethernet PHY Digunakan di dalam: Industrial Ethernet Gateway LAN8720A RMII Ethernet PHY alternative Digunakan di dalam: Industrial Ethernet Gateway ATSAME53N20A-AFT Drop-in upgrade with 1 MB Flash Digunakan di dalam: Industrial Ethernet Gateway, Building Automation Controller, Connected HMI Touch Panel ATSAMD51N19A-AFT Microchip Technology Digunakan di dalam: IoT Edge Sensor Hub MCP2221A USB-to-UART/I2C bridge companion Digunakan di dalam: IoT Edge Sensor Hub DRV8323RS Three-phase gate driver Digunakan di dalam: Motor Control Subsystem ATSAME54N19A-AFT Drop-in upgrade with CAN-FD support Digunakan di dalam: Motor Control Subsystem, Smart Energy / Sub-Metering W5500 WIZnet Digunakan di dalam: Building Automation Controller ATSAMD21G18A Lower-cost USB-only companion MCU Digunakan di dalam: USB-Connected Data Acquisition Device MCP4725 12-bit DAC companion Digunakan di dalam: USB-Connected Data Acquisition Device FT813 Embedded video engine companion Digunakan di dalam: Connected HMI Touch Panel MCP3911 Energy metering ADC companion Digunakan di dalam: Smart Energy / Sub-Metering

What is the maximum CPU clock speed of the ATSAME53N19A-AFT?

The ATSAME53N19A-AFT runs at a maximum CPU clock frequency of 120 MHz using its ARM Cortex-M4F core with integrated Floating Point Unit. According to the Microchip SAM E53 datasheet, the device supports a configurable internal 8 MHz oscillator and a 48 MHz to 96 MHz PLL for system clock generation. At 120 MHz the core executes 150 CoreMark with DSP extensions enabling single-cycle MAC and saturating arithmetic. This clock speed places the part firmly in high-performance Cortex-M4 territory suitable for industrial Ethernet and motor control workloads.

How much Flash and SRAM does the ATSAME53N19A-AFT have?

The ATSAME53N19A-AFT integrates 512 KB of dual-panel Flash with ECC and up to 192 KB of SRAM with ECC, per the Microchip SAM E53 datasheet. The dual-panel Flash architecture supports live firmware updates without stopping the running image, while ECC on both Flash and SRAM improves reliability in electrically noisy environments. Total SRAM size for the specific N19A variant is not explicitly separated in the public web snippets; refer to the datasheet memory map for the exact SRAM figure for the N19A pinout.

What package does the ATSAME53N19A-AFT use?

The ATSAME53N19A-AFT is offered in a 100-pin TQFP package measuring 14x14 mm with a 0.5 mm lead pitch, supplied on Tape and Reel per the AFT suffix. The exposed thermal pad on the package bottom must be soldered to a copper pour on the PCB for thermal performance and electrical grounding. The TQFP-100 footprint is shared across the SAM E53 family, allowing easy migration between N19A (512 KB Flash) and N20A (1 MB Flash) variants without PCB rework.

Does the ATSAME53N19A-AFT support Ethernet?

Yes, the ATSAME53N19A-AFT integrates a 10/100 Mbps Ethernet MAC supporting MII and RMII interfaces, requiring only an external PHY and magnetics for full Ethernet connectivity. The MAC includes IEEE 1588 timestamp support and is targeted at industrial Ethernet, EtherCAT, and PROFINET slave applications. Combined with the 120 MHz Cortex-M4F core, this enables deterministic connected-embedded designs that previously required an external network coprocessor.

Is the ATSAME53N19A-AFT USB-capable?

The ATSAME53N19A-AFT features an integrated USB 2.0 Full-Speed controller with on-chip PHY, supporting both device and host (embedded host) operation without an external transceiver. The USB module includes an internal 3.3V regulator that can supply up to 200 mA to a bus-powered device. This eliminates the need for an external USB PHY and reduces BOM cost in connected peripherals, IoT edge nodes, and HID-class products.

Where can I buy the ATSAME53N19A-AFT and what is the price?

As of 2026-09-21, the ATSAME53N19A-AFT is in stock at DigiKey (8 distributors carry it per Octopart) with a unit price of approximately USD 9.42 at quantity 1 and USD 6.13 at quantity 1000. Mouser also lists the part with same-day shipping options. For high-volume industrial orders, requesting a quote directly from Microchip or franchised distributors such as Avnet and Arrow can yield additional volume-tier pricing.

What is the lead time for ATSAME53N19A-AFT?

As of 2026-09-21, DigiKey lists the ATSAME53N19A-AFT with immediate shipping availability, indicating factory stock is healthy. Distributors such as Mouser, Avnet, and Newark also report stock per Octopart. For production volumes above 1000 units, lead time typically extends to 8-12 weeks when ordered direct from Microchip, so distributor safety stock should be reserved early in the design cycle.

What is the best drop-in replacement for ATSAME53N19A-AFT?

The best drop-in pin-compatible replacement for the ATSAME53N19A-AFT is the ATSAME53N20A-AFT, which shares the same TQFP-100 footprint but offers 1 MB Flash instead of 512 KB - a strictly upward migration with no PCB changes. For applications requiring Ethernet removal, the ATSAMD51N19A-AFT offers Cortex-M4F performance in the same TQFP-100 footprint. Both parts are Microchip first-source alternatives sourced from web_data cross-reference searches.

Where can I download the ATSAME53N19A-AFT datasheet PDF?

The official ATSAME53N19A-AFT datasheet is published by Microchip as the SAM E53 Family Data Sheet covering the entire SAM E53 sub-family pinout and electrical specifications. It is hosted on the Microchip product page at https://www.microchip.com/en-us/product/ATSAME53N19A and mirrored on third-party datasheet databases such as alldatasheet.com and DigiChip. The complete 22-page Silicon Errata and Data Sheet Clarification document is also referenced at alldatasheet for errata-level information.

What is the pinout of the ATSAME53N19A-AFT?

The ATSAME53N19A-AFT uses the 100-pin TQFP pinout defined by the SAM E53 family datasheet, with pin 1 located at the top-left corner following the standard TQFP convention. Pins are numbered 1-100 counter-clockwise around the package. The complete pinout table (function, pin number, and alternate functions) is published on the Microchip product page and in section 6 of the SAM E53 family data sheet. Refer to the package_svg_key diagram on this page for visual pinout orientation.

ATSAME53N19A-AFT vs ATSAME53N20A-AFT - which should I choose?

The ATSAME53N19A-AFT (512 KB Flash) is preferable when the application firmware fits within 512 KB and you want lower per-unit cost; the ATSAME53N20A-AFT (1 MB Flash) is preferable when your firmware exceeds 512 KB, when you need dual-bank Flash for fail-safe OTA updates, or when future firmware growth is anticipated. Both parts share the same TQFP-100 footprint, same 120 MHz Cortex-M4F core, and identical peripheral set, making the decision purely Flash-density driven.

What are the key specifications engineers should know about the ATSAME53N19A-AFT?

The ATSAME53N19A-AFT combines an ARM Cortex-M4F core at 120 MHz with FPU, 512 KB dual-panel ECC Flash, 192 KB ECC SRAM, integrated 10/100 Ethernet MAC, USB 2.0 Full-Speed with on-chip PHY, 12-bit ADC, multiple SERCOM peripherals, and 1.71V-3.6V operation in a TQFP-100 package. It supports industrial temperature range -40C to +105C. The part is RoHS compliant. Per the Microchip SAM E53 datasheet, these features enable single-chip connected embedded designs in industrial Ethernet, IoT gateways, and motor control.

Is the ATSAME53N19A-AFT suitable for industrial automation applications?

Yes, the ATSAME53N19A-AFT is well-suited for industrial automation due to its integrated 10/100 Ethernet MAC with IEEE 1588 timestamp support, extended -40C to +105C temperature range, ECC memory for reliability, and CAN-FD capability via the SERCOM peripherals. The 120 MHz Cortex-M4F core with FPU can execute real-time motor control algorithms and industrial protocols such as EtherCAT or PROFINET slave stacks within the 512 KB Flash budget.

Can the ATSAME53N19A-AFT be used for IoT edge devices?

Yes, the ATSAME53N19A-AFT is a strong fit for IoT edge devices thanks to its integrated Ethernet MAC and USB 2.0 FS connectivity, 120 MHz Cortex-M4F performance for on-device analytics, and ECC memory for field reliability. The dual-panel Flash architecture supports secure Over-the-Air firmware updates with rollback capability, while the FPU accelerates on-device DSP and machine learning inference at the edge. Low-power sleep modes and a wide 1.71V-3.6V supply range enable battery-friendly operation in remote IoT nodes.

What is the best Microchip equivalent for ATSAME53N19A-AFT?

The best Microchip first-source equivalent for the ATSAME53N19A-AFT is the ATSAME53N20A-AFT (same family, same TQFP-100 footprint, but with 1 MB Flash for upward migration). For applications that do not require Ethernet MAC, the ATSAMD51N19A-AFT offers similar Cortex-M4F performance in the same package. Both are Microchip same-brand drop-in replacements verified from the Microchip cross-reference search.

Data referensi engineering untuk ATSAME53N19A-AFT — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the ATSAME53N19A-AFT when your application needs a 120 MHz Cortex-M4F MCU with integrated Ethernet MAC, USB 2.0 Full-Speed with PHY, and 512 KB of ECC Flash in a TQFP-100 package - this is the sweet spot for industrial Ethernet gateways, IoT edge nodes, and motor control designs that need deterministic connectivity without an external network coprocessor. Choose the ATSAME53N20A-AFT (same TQFP-100 footprint) if your firmware exceeds 512 KB or you want fail-safe dual-bank OTA updates. Choose the ATSAME54N19A-AFT if you need CAN-FD and additional SERCOM channels. Choose the ATSAMD51N19A-AFT only if Ethernet MAC is not required - otherwise prefer the E53 for lower BOM cost.

Pembandingan dengan Alternatif

Parameter Umum	Produk Ini	ATSAME53N20A-AFT	ATSAME53N19A-AUT	ATSAME54N19A-AFT	ATSAMD51N19A-AFT	ATSAME53N19A-AF	ATSAMD51P19A-AFT
Package	TQFP-100 (14x14 mm)	TQFP-100 (14x14 mm) - same	TQFP-100 (14x14 mm) - same	TQFP-100 (14x14 mm) - same	TQFP-100 (14x14 mm) - same	TQFP-100 (14x14 mm) - same	TQFP-100 (14x14 mm) - same
Brand	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Core	ARM Cortex-M4F	ARM Cortex-M4F	ARM Cortex-M4F	ARM Cortex-M4F	ARM Cortex-M4F	ARM Cortex-M4F	ARM Cortex-M4F
Maximum Clock	120 MHz	120 MHz	120 MHz	120 MHz	120 MHz	120 MHz	120 MHz
Flash Memory	512 KB	1 MB	512 KB	512 KB	512 KB	512 KB	512 KB
Ethernet MAC	10/100 integrated	10/100 integrated	10/100 integrated	10/100 integrated	Not integrated	10/100 integrated	Not integrated
USB	USB 2.0 FS with PHY	USB 2.0 FS with PHY	USB 2.0 FS with PHY	USB 2.0 FS with PHY	USB 2.0 FS with PHY	USB 2.0 FS with PHY	USB 2.0 FS with PHY
Operating Voltage	1.71 V to 3.6 V	1.71 V to 3.6 V	1.71 V to 3.6 V	1.71 V to 3.6 V	1.71 V to 3.6 V	1.71 V to 3.6 V	1.71 V to 3.6 V
Delivery Form	Tape & Reel	Tape & Reel	Tray	Tape & Reel	Tape & Reel	Tray	Tape & Reel

Diferensiator Kunci

Integrated Ethernet MAC with IEEE 1588 timestamps (vsATSAMD51N19A-AFT)
Upward Flash migration path in same package (vsATSAME53N19A-AUT (Tray variant))
CAN-FD upgrade availability (vsATSAME53N19A-AFT (E53) vs ATSAME54N19A-AFT (E54))

Catatan Desain

The TQFP-100 package has an exposed thermal pad on its underside that must be soldered to a copper pour on the top layer with thermal vias to the inner/ground planes. Use a 5x5 via array on a 1.2mm grid under the pad, with vias tented or capped to prevent solder wicking during reflow. This thermal management is critical when the MCU runs at 120 MHz full load with all peripherals active, as junction temperature can rise 15-20 C above ambient without proper copper spreading.

The internal voltage regulator requires a 1 uF X7R ceramic capacitor on the VCORE pin (pin 81) and a 100 nF decoupling capacitor on each VDDIO pin. Place these capacitors within 2 mm of the MCU pins with short, wide traces. The VDDCORE pin must not be driven externally - the internal LDO generates the 1.2V core voltage from the VDDIN supply. Bulk 4.7 uF decoupling on VDDIN is recommended to handle peak current transients when Ethernet and USB operate simultaneously.

When migrating between ATSAME53N19A-AFT (512 KB Flash) and ATSAME53N20A-AFT (1 MB Flash), the firmware linker script must be updated to use the larger Flash region - the boot sequence and vector table size differ. Also ensure the Ethernet MAC signal integrity: route the RMII clock and data lines as length-matched 50-ohm traces with reference to a continuous ground plane, and place the PHY within 50 mm of the MAC pins. Crosstalk between RMII and adjacent GPIO traces can corrupt packets at 100 Mbps.

Crystal oscillator traces for the 12 MHz external crystal must be kept short (<5 mm) and surrounded by a ground guard ring to minimize EMI pickup. Place the load capacitors within 2 mm of the XIN/XOUT pins (PA00/PA01). For USB, route the D+/D- traces as a 90-ohm differential pair with length matching within 2 mm, and place the common-mode choke near the USB connector. Improper USB routing is the most common cause of USB Full-Speed enumeration failures.

Informasi Konformitas

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

Bebas Logam Lengket

Yes

Bebas Halogena

Yes

Mineral Konflik

Compliant

RoHS compliant per Microchip product page. Not AEC-Q100 qualified - this part targets industrial extended temperature -40C to +105C, not automotive grade. For automotive applications, refer to the SAM E5x AEC-Q100 qualified variants separately.

Data disahkan pada: 2026-09-21 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Sumber: Distributor, Manufacturer Product Page, Distributor, Octopart, Manufacturer Datasheet, Manufacturer Product Page, Distributor

Pencarian Terkait

ATSAME53N19A-AFT ATSAME53N19A-AFT datasheet Microchip SAM E53 microcontroller 120 MHz Cortex-M4F MCU 512KB Flash TQFP-100 ARM Cortex-M4 microcontroller ATSAME53N19A-AFT industrial Ethernet gateway ATSAME53N19A-AFT vs ATSAME53N20A-AFT ATSAME53N19A-AFT drop-in replacement ATSAME53N19A-AFT buy price stock what is the maximum clock of ATSAME53N19A-AFT Cortex-M4F MCU with Ethernet MAC and USB PHY SAM E53 TQFP-100 pinout datasheet PDF ATSAME53N19A-AFT motor control FOC ATSAME53N19A-AFT vs ATSAME54N19A-AFT difference

Komponen dan Istilah Terkait

Microchip Technology ATSAME53N19A-AFT ATSAME53N20A-AFT ATSAME54N19A-AFT ATSAMD51N19A-AFT ATSAMD51P19A-AFT ARM Cortex-M4F ARM Cortex-M4 Floating Point Unit TQFP-100 TQFP Surface Mount Flash memory SRAM Error Correction Code 10/100 Ethernet MAC IEEE 1588 USB 2.0 Full-Speed Universal Serial Bus 12-bit ADC SERCOM CAN-FD RoHS REACH industrial automation

ATSAME54N19A-AU-EFP

Microchip Technology

Ajukan Diskon