ATXMEGA16D4-AN - 32MHz 16KB AVR XMEGA MCU | Microchip
MPN: ATXMEGA16D4-AN ✓ AktifATXMEGA16D4-AN Ringkasan
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The AVR XMEGA family combines an enhanced RISC architecture with low-power design and extensive event-driven peripherals. ATXMEGA16D4 devices use a 16-bit instruction architecture with an 8-bit general-purpose register organization, making them suitable for embedded control systems that require more capability than a basic 8-bit MCU without the complexity of a larger processor.
The ATXMEGA16D4-AN includes 16 KB of flash with read-while-write capabilities and a 4 KB boot-code section, 2 KB of SRAM, and 1 KB of EEPROM. Its peripheral set includes 34 general-purpose I/O lines, a four-channel event system, a programmable multilevel interrupt controller, a 16-bit real-time counter, four flexible 16-bit timer/counters with compare and PWM channels, two USARTs, and two two-wire serial interfaces. These resources support deterministic control, serial communications, and direct peripheral signaling.
The D4 architecture places emphasis on event handling and flexible timers. The event system can connect peripheral events directly to other peripherals, reducing CPU intervention for routine sequencing and timing tasks. The four timer/counter modules support capture, compare, and PWM operations, while the programmable interrupt controller provides configurable response levels for responsive real-time behavior. Two USART channels and two TWI interfaces allow simultaneous communication with sensors, transceivers, and other embedded controllers.
Typical applications include industrial control panels, compact sensor hubs, building automation nodes, data-acquisition modules, battery-powered instrumentation, and industrial communication bridges. The 32 MHz processing rate supports faster control-loop execution, while the event system and hardware timers offload repetitive peripheral coordination. Its 1.6 V to 3.6 V operating range also permits integration into low-voltage embedded systems when the board's power budget is designed around the complete operating range.
For PCB implementation, preserve the 44-TQFP footprint and follow the manufacturer's pin-description table for programming, reset, clock, and peripheral connections. Place decoupling capacitors close to the supply pins, route sensitive clock signals away from fast-switching nodes, and confirm programming access before committing the board layout.
This product page combines the manufacturer device information with practical design guidance, package-focused comparisons, and engineering-oriented application notes. It is intended to accelerate component selection and help engineers verify that the ATXMEGA16D4-AN's memory, peripherals, voltage range, and thermal rating fit the intended embedded-control design.
Alternatif penggantian untuk ATXMEGA16D4-AN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ATXMEGA16D4-AN (sama faktor bentuk dan footprint) — berbeda di dalam Package, Flash Memory, EEPROM Memory, SRAM, General-Purpose I/O Lines.
ATXMEGA16D4-AU
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ATXMEGA32D4-AN
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ATXMEGA64D4-AN
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ATXMEGA128D4-AN
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ATXMEGA128C3-AN
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ATXMEGA16D4-AN Rating Maksimal & Karakteristik Listrik
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Frekuensi Bawah Maximum | 32 MHz |
| Flash Memory | 16 KB (8K x 16) |
| Boot Code Section | 4 KB |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| General-Purpose I/O | 34 lines |
| Event System | 4 channels |
| Timer/Counter Modules | 4 flexible 16-bit timer/counters |
| Real-Time Counter | 16-bit |
| USART Interfaces | 2 |
| Two-Wire Serial Interfaces | 2 |
| Interrupt Controller | Programmable multilevel interrupt controller |
| Operating Voltage | 1.6 V to 3.6 V |
| Maximum Operating Temperature | 105°C |
| Paket | 44-TQFP, 10 mm x 10 mm |
| Flash Feature | In-system programmable with read-while-write capability |
| Component Color | Green |
ATXMEGA16D4-AN 44-tqfp, 10 mm x 10 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk ATXMEGA16D4-AN (44-tqfp, 10 mm x 10 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk ATXMEGA16D4-AN.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ATXMEGA16D4-AN cocok untuk 6 aplikasis: Industrial Sensor Hub, Building Automation Controller, Compact Data-Acquisition Module, Industrial Communication Gateway, Battery-Powered Field Instrument, LED and Motor Control Subsystem.
Industrial Sensor Hub
The ATXMEGA16D4-AN fits a compact industrial sensor hub because it combines a 32 MHz AVR core with 34 GPIO lines, two TWI interfaces, two USARTs, and four hardware timer/counters. A designer can assign TWI channels to compatible sensors, use USART channels for external transceivers or service ports, and dedicate timers to periodic acquisition or actuator timing. Its 1.6 V to 3.6 V operating range supports low-voltage regulated rails, while the 105°C maximum temperature rating extends suitability above an 85°C-only commercial design. The event system can also route peripheral events with less CPU intervention, helping preserve predictable timing as the number of sensors grows.
Direkomendasikan
Building Automation Controller
The ATXMEGA16D4-AN is useful in a building-automation controller that combines environmental sensing, digital outputs, and serial communications. Its 34 GPIO lines support digital inputs, relay-control outputs, and status indicators, while two USARTs and two TWI channels support meter access and local sensor networks. Four flexible 16-bit timer/counters can generate timing signals or PWM outputs, and the four-channel event system improves responsiveness between timers and communication peripherals. At 32 MHz, the controller can execute protocol handling and local logic concurrently, subject to the timing and memory requirements of the selected application.
Direkomendasikan
Compact Data-Acquisition Module
The ATXMEGA16D4-AN can serve as the control MCU in a compact data-acquisition module requiring deterministic sampling control and flexible communications. The four 16-bit timer/counters support trigger generation, capture functions, and PWM where required, while the programmable multilevel interrupt controller helps organize responses from multiple sources. Its 16 KB flash accommodates a focused acquisition firmware, 2 KB SRAM supports working buffers, and 1 KB EEPROM can retain configuration or calibration values. Two USARTs and two TWI interfaces allow simultaneous sensor and host connectivity, although final sample rates depend on the selected ADC implementation and signal-conditioning circuitry.
Direkomendasikan
Industrial Communication Gateway
The ATXMEGA16D4-AN is appropriate for a gateway that translates between local serial devices and a higher-level communications controller. Two USARTs permit simultaneous host and peripheral links, while the two TWI interfaces can connect local sensors or configuration devices. The four-channel event system can coordinate traffic between timers and serial interfaces without relying on polling for every event. A 32 MHz execution rate supports protocol processing and real-time supervision, while the 1.6 V to 3.6 V range permits operation from a suitably regulated low-voltage rail. Communications transceivers and isolation components should be selected separately for the required physical interface.
Direkomendasikan
Battery-Powered Field Instrument
The ATXMEGA16D4-AN can support a battery-powered field instrument when the design carefully budgets regulator efficiency, active current, and sleep duration. Its low-voltage 1.6 V to 3.6 V operating range permits direct use from an appropriately regulated source, and the XMEGA D4 family's low-power architecture is relevant to portable monitoring equipment. Two USARTs, two TWI interfaces, and four hardware timers allow the MCU to manage sensors, local controls, and periodic sampling while the event system handles routine peripheral coordination. Actual battery life must be calculated from the selected regulator, sampling interval, communications duty cycle, and board leakage rather than inferred from processor frequency alone.
Direkomendasikan
LED and Motor Control Subsystem
The ATXMEGA16D4-AN can control LED drivers, small motors, or mixed timing outputs because it provides four flexible 16-bit timer/counters with compare and PWM channels. Independent timers allow multiple outputs to be generated with defined periods and duty cycles, while 34 GPIO lines provide interface signals for drivers and interlocks. The event system can connect timer events to other peripherals, reducing polling overhead in multi-axis or sequenced control systems. Its 32 MHz core handles motion logic and supervisory functions, and the 105°C grade is useful in enclosed equipment. Driver transistors, protection networks, and mechanical limits remain part of the final safety and thermal design.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ATXMEGA16D4-AN — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ATXMEGA16D4-AU | ATXMEGA32D4-AN | ATXMEGA64D4-AN | ATXMEGA128D4-AN | ATXMEGA128C3-AN |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16 KB | 16 KB | 32 KB | 64 KB | 128 KB | 128 KB |
Diferensiator Kunci
- Extended-temperature 44-TQFP option (vsATXMEGA16D4-AU)
- Direct firmware-growth path in the same package (vsATXMEGA32D4-AN)
- Higher flash ceiling without changing the footprint (vsATXMEGA128D4-AN)
Catatan Desain
Use the manufacturer package drawing and pin-description table to place all 44 TQFP pads, pads 1 through 44 consecutively, and preserve the exposed perimeter geometry. Place the required supply bypass capacitors close to the device power pins and return them to an uninterrupted ground plane. Verify the PCB library against the official 10 mm by 10 mm TQFP drawing rather than relying on a visually similar TQFP footprint.
Design the 1.6 V to 3.6 V supply for the MCU's specified operating range and peripheral load rather than only for the nominal rail. Estimated: with a 3.3 V rail, a 2.5 V core-equivalent load, and 20 mA active current, the regulator's power loss is approximately 16 mW before regulator efficiency; the actual total must also include I/O and peripheral current. Confirm startup, brownout behavior, and maximum clock operation across the complete supply range.
Route the clock network away from switching-power nodes and high-current LED or motor-driver traces. Keep programming, reset, and debug-test interfaces accessible for production programming. The two USART and two TWI interfaces can create dense routing around the 44-pin package, so assign pins early and use the event system and timer resources according to the device's peripheral multiplexing rules from the datasheet.
Do not substitute a larger-memory XMEGA D4 device solely because it uses the same 44-TQFP package. Review peripheral availability, memory-map assumptions, boot-code layout, clock configuration, pin multiplexing, and thermal requirements. The ATXMEGA16D4-AU shares the target's memory configuration but has an 85°C maximum rating, making it unsuitable as a replacement when the original design requires operation to 105°C.
Informasi Konformitas
The distributor listing identifies the device as green, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified. The target is an industrial microcontroller rather than an automotive-qualified product.