ATXMEGA16D4-AN - 32MHz 16KB AVR XMEGA MCU | Microchip
MPN: ATXMEGA16D4-AN ✓ 啟用中ATXMEGA16D4-AN 概覽
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The AVR XMEGA family combines an enhanced RISC architecture with low-power design and extensive event-driven peripherals. ATXMEGA16D4 devices use a 16-bit instruction architecture with an 8-bit general-purpose register organization, making them suitable for embedded control systems that require more capability than a basic 8-bit MCU without the complexity of a larger processor.
The ATXMEGA16D4-AN includes 16 KB of flash with read-while-write capabilities and a 4 KB boot-code section, 2 KB of SRAM, and 1 KB of EEPROM. Its peripheral set includes 34 general-purpose I/O lines, a four-channel event system, a programmable multilevel interrupt controller, a 16-bit real-time counter, four flexible 16-bit timer/counters with compare and PWM channels, two USARTs, and two two-wire serial interfaces. These resources support deterministic control, serial communications, and direct peripheral signaling.
The D4 architecture places emphasis on event handling and flexible timers. The event system can connect peripheral events directly to other peripherals, reducing CPU intervention for routine sequencing and timing tasks. The four timer/counter modules support capture, compare, and PWM operations, while the programmable interrupt controller provides configurable response levels for responsive real-time behavior. Two USART channels and two TWI interfaces allow simultaneous communication with sensors, transceivers, and other embedded controllers.
Typical applications include industrial control panels, compact sensor hubs, building automation nodes, data-acquisition modules, battery-powered instrumentation, and industrial communication bridges. The 32 MHz processing rate supports faster control-loop execution, while the event system and hardware timers offload repetitive peripheral coordination. Its 1.6 V to 3.6 V operating range also permits integration into low-voltage embedded systems when the board's power budget is designed around the complete operating range.
For PCB implementation, preserve the 44-TQFP footprint and follow the manufacturer's pin-description table for programming, reset, clock, and peripheral connections. Place decoupling capacitors close to the supply pins, route sensitive clock signals away from fast-switching nodes, and confirm programming access before committing the board layout.
This product page combines the manufacturer device information with practical design guidance, package-focused comparisons, and engineering-oriented application notes. It is intended to accelerate component selection and help engineers verify that the ATXMEGA16D4-AN's memory, peripherals, voltage range, and thermal rating fit the intended embedded-control design.
直接替換替代品,適用於 ATXMEGA16D4-AN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATXMEGA16D4-AN (相同外形與佔位) — 差異在於 Package, Flash Memory, EEPROM Memory, SRAM, General-Purpose I/O Lines.
ATXMEGA16D4-AU
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATXMEGA32D4-AN
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATXMEGA64D4-AN
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATXMEGA128D4-AN
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ATXMEGA128C3-AN
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ATXMEGA16D4-AN 最大額定值與電氣特性
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| 最大時脈頻率 | 32 MHz |
| Flash Memory | 16 KB (8K x 16) |
| Boot Code Section | 4 KB |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| General-Purpose I/O | 34 lines |
| Event System | 4 channels |
| Timer/Counter Modules | 4 flexible 16-bit timer/counters |
| Real-Time Counter | 16-bit |
| USART Interfaces | 2 |
| Two-Wire Serial Interfaces | 2 |
| Interrupt Controller | Programmable multilevel interrupt controller |
| Operating Voltage | 1.6 V to 3.6 V |
| Maximum Operating Temperature | 105°C |
| 封裝 | 44-TQFP, 10 mm x 10 mm |
| Flash Feature | In-system programmable with read-while-write capability |
| Component Color | Green |
ATXMEGA16D4-AN 44-tqfp, 10 mm x 10 mm 腳位配置指南
ATXMEGA16D4-AN(44-tqfp, 10 mm x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATXMEGA16D4-AN.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATXMEGA16D4-AN 適用於 6 應用s: Industrial Sensor Hub, Building Automation Controller, Compact Data-Acquisition Module, Industrial Communication Gateway, Battery-Powered Field Instrument, LED and Motor Control Subsystem.
Industrial Sensor Hub
The ATXMEGA16D4-AN fits a compact industrial sensor hub because it combines a 32 MHz AVR core with 34 GPIO lines, two TWI interfaces, two USARTs, and four hardware timer/counters. A designer can assign TWI channels to compatible sensors, use USART channels for external transceivers or service ports, and dedicate timers to periodic acquisition or actuator timing. Its 1.6 V to 3.6 V operating range supports low-voltage regulated rails, while the 105°C maximum temperature rating extends suitability above an 85°C-only commercial design. The event system can also route peripheral events with less CPU intervention, helping preserve predictable timing as the number of sensors grows.
推薦
Building Automation Controller
The ATXMEGA16D4-AN is useful in a building-automation controller that combines environmental sensing, digital outputs, and serial communications. Its 34 GPIO lines support digital inputs, relay-control outputs, and status indicators, while two USARTs and two TWI channels support meter access and local sensor networks. Four flexible 16-bit timer/counters can generate timing signals or PWM outputs, and the four-channel event system improves responsiveness between timers and communication peripherals. At 32 MHz, the controller can execute protocol handling and local logic concurrently, subject to the timing and memory requirements of the selected application.
推薦
Compact Data-Acquisition Module
The ATXMEGA16D4-AN can serve as the control MCU in a compact data-acquisition module requiring deterministic sampling control and flexible communications. The four 16-bit timer/counters support trigger generation, capture functions, and PWM where required, while the programmable multilevel interrupt controller helps organize responses from multiple sources. Its 16 KB flash accommodates a focused acquisition firmware, 2 KB SRAM supports working buffers, and 1 KB EEPROM can retain configuration or calibration values. Two USARTs and two TWI interfaces allow simultaneous sensor and host connectivity, although final sample rates depend on the selected ADC implementation and signal-conditioning circuitry.
推薦
Industrial Communication Gateway
The ATXMEGA16D4-AN is appropriate for a gateway that translates between local serial devices and a higher-level communications controller. Two USARTs permit simultaneous host and peripheral links, while the two TWI interfaces can connect local sensors or configuration devices. The four-channel event system can coordinate traffic between timers and serial interfaces without relying on polling for every event. A 32 MHz execution rate supports protocol processing and real-time supervision, while the 1.6 V to 3.6 V range permits operation from a suitably regulated low-voltage rail. Communications transceivers and isolation components should be selected separately for the required physical interface.
推薦
Battery-Powered Field Instrument
The ATXMEGA16D4-AN can support a battery-powered field instrument when the design carefully budgets regulator efficiency, active current, and sleep duration. Its low-voltage 1.6 V to 3.6 V operating range permits direct use from an appropriately regulated source, and the XMEGA D4 family's low-power architecture is relevant to portable monitoring equipment. Two USARTs, two TWI interfaces, and four hardware timers allow the MCU to manage sensors, local controls, and periodic sampling while the event system handles routine peripheral coordination. Actual battery life must be calculated from the selected regulator, sampling interval, communications duty cycle, and board leakage rather than inferred from processor frequency alone.
推薦
LED and Motor Control Subsystem
The ATXMEGA16D4-AN can control LED drivers, small motors, or mixed timing outputs because it provides four flexible 16-bit timer/counters with compare and PWM channels. Independent timers allow multiple outputs to be generated with defined periods and duty cycles, while 34 GPIO lines provide interface signals for drivers and interlocks. The event system can connect timer events to other peripherals, reducing polling overhead in multi-axis or sequenced control systems. Its 32 MHz core handles motion logic and supervisory functions, and the 105°C grade is useful in enclosed equipment. Driver transistors, protection networks, and mechanical limits remain part of the final safety and thermal design.
推薦
工程參考資料,適用於 ATXMEGA16D4-AN — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATXMEGA16D4-AU | ATXMEGA32D4-AN | ATXMEGA64D4-AN | ATXMEGA128D4-AN | ATXMEGA128C3-AN |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16 KB | 16 KB | 32 KB | 64 KB | 128 KB | 128 KB |
主要差異化特點
- Extended-temperature 44-TQFP option (對比ATXMEGA16D4-AU)
- Direct firmware-growth path in the same package (對比ATXMEGA32D4-AN)
- Higher flash ceiling without changing the footprint (對比ATXMEGA128D4-AN)
設計說明
Use the manufacturer package drawing and pin-description table to place all 44 TQFP pads, pads 1 through 44 consecutively, and preserve the exposed perimeter geometry. Place the required supply bypass capacitors close to the device power pins and return them to an uninterrupted ground plane. Verify the PCB library against the official 10 mm by 10 mm TQFP drawing rather than relying on a visually similar TQFP footprint.
Design the 1.6 V to 3.6 V supply for the MCU's specified operating range and peripheral load rather than only for the nominal rail. Estimated: with a 3.3 V rail, a 2.5 V core-equivalent load, and 20 mA active current, the regulator's power loss is approximately 16 mW before regulator efficiency; the actual total must also include I/O and peripheral current. Confirm startup, brownout behavior, and maximum clock operation across the complete supply range.
Route the clock network away from switching-power nodes and high-current LED or motor-driver traces. Keep programming, reset, and debug-test interfaces accessible for production programming. The two USART and two TWI interfaces can create dense routing around the 44-pin package, so assign pins early and use the event system and timer resources according to the device's peripheral multiplexing rules from the datasheet.
Do not substitute a larger-memory XMEGA D4 device solely because it uses the same 44-TQFP package. Review peripheral availability, memory-map assumptions, boot-code layout, clock configuration, pin multiplexing, and thermal requirements. The ATXMEGA16D4-AU shares the target's memory configuration but has an 85°C maximum rating, making it unsuitable as a replacement when the original design requires operation to 105°C.
合規資訊
The distributor listing identifies the device as green, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified. The target is an industrial microcontroller rather than an automotive-qualified product.