Microchip Technology

ATXMEGA64A4-AU - 32MHz AVR XMEGA Microcontroller | Microchip

MPN: ATXMEGA64A4-AU ✓ Aktif
1.6 V to 3.6 V Vdss 44-TQFP, 10 x 10 mm Package 32 MHz Speed 64 KB (32K x 16) Memory
MOQ: 1 |

ATXMEGA64A4-AU Ringkasan

The Microchip Technology ATXMEGA64A4-AU is a low-power, high-performance 8/16-bit AVR XMEGA A4 microcontroller with a 32 MHz clock, 64 KB self-programming Flash memory, 4 KB SRAM, and 2 KB EEPROM in a 44-TQFP 10 x 10 mm package. It supports operating voltages from 1.6 V to 3.6 V and provides up to 32 MIPS of throughput at 32 MHz.

An 8/16-bit microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, data memory, and peripherals in one device. The AVR enhanced RISC architecture belongs to the broader embedded-control hierarchy: microcontroller → 8/16-bit MCU → embedded processor → semiconductor. XMEGA devices are designed for low-power industrial control, communications, data acquisition, and real-time peripheral-heavy systems.

Key features include 64 KB of self-programming Flash with read-while-write capability, a separate 4 KB boot-code section, 4 KB of SRAM, and 2 KB of EEPROM. The device provides 34 general-purpose I/O lines, a 12-channel 12-bit ADC, five flexible 16-bit timer/counter channels with PWM support, five USARTs, and communication interfaces including I2C, SPI, IrDA, and USB. A four-channel DMA controller and eight-channel event system help move data and synchronize peripherals without excessive CPU intervention.

The ATXMEGA64A4-AU combines an enhanced AVR RISC core with a peripheral set intended for embedded control rather than general-purpose computing. Its 32 MHz operating frequency provides up to 32 MIPS throughput, while the event system can route signals among timer, comparator, ADC, and communication resources. The external bus interface extends system connectivity when additional memory or peripherals are required.

Typical uses include industrial automation, building automation, sensor aggregation, data-acquisition systems, touch interfaces, communications equipment, and low-power embedded control. Its 34 I/O lines suit products requiring several digital interfaces, while the ADC and event system support mixed-signal and time-sensitive measurements. The USB interface can simplify connections to host systems when the selected board configuration includes the required support circuitry.

For layout, keep the 32 MHz clock and decoupling layout compact, observe all supply and ground-pin requirements, and follow the package pin-connection guidance in the manufacturer datasheet. Provide stable 1.6 V to 3.6 V operation across temperature, and verify the selected programming, crystal, and communication interfaces during firmware bring-up.

This page combines the manufacturer specifications, package and interface details, sourcing guidance, application analysis, and practical design considerations needed to evaluate the ATXMEGA64A4-AU for an embedded-control design.

Alternatif penggantian untuk ATXMEGA64A4-AU — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ATXMEGA64A4-AU (sama faktor bentuk dan footprint) — berbeda di dalam Package, External Bus Interface, ADC, Product Type, EEPROM.

Microchip Technology
Package: 44-pin TQFP (10x10 mm)
External Bus Interface: Yes
ADC: 12-bit, 12-channel
Bandingkan dengan ATXMEGA64A4-AU →
Microchip Technology
Package: 64-TQFP (14 x 14 mm)
Product Type: 8/16-bit AVR RISC microcontroller
Bandingkan dengan ATXMEGA64A4-AU →
Microchip Technology
Package: 100-lead TQFP, 14 mm x 14 mm
External Bus Interface: Supported
Product Type: 8/16-bit AVR XMEGA A1 microcontroller
Bandingkan dengan ATXMEGA64A4-AU →
Microchip Technology
Package: 44-pin TQFP (10x10 mm)
External Bus Interface: Yes
ADC: 12-bit, 1 MSPS
Bandingkan dengan ATXMEGA64A4-AU →

ATXMEGA64A4U-AU

✅ Drop-In
Microchip Technology
📦 44-TQFP (10 x 10 mm)
AVR 8/16-bit RISC · AVR XMEGA A4U · 32 MHz (32 MIPS) · 64 KB (32K x 16) · 4 KB · 2 KB · 4 KB · 1.6 V to 3.6 V

Kontak untuk harga

Lihat Datasheet →

ATXMEGA64A4-AU Rating Maksimal & Karakteristik Listrik

Product Type 8/16-bit AVR XMEGA A4 microcontroller
Frekuensi Bawah Maximum 32 MHz
Maximum Throughput 32 MIPS at 32 MHz
Flash Memory 64 KB (32K x 16)
Boot Code Section 4 KB
SRAM 4 KB
EEPROM 2 KB
Operating Voltage Range 1.6 V to 3.6 V
General-Purpose I/O 34 lines
ADC 12-bit, 12 channels
Timer/Counters 5 flexible 16-bit channels
PWM Channels 16 channels
DMA Controller 4 channels
Event System 8 channels
Serial Communication Interfaces I2C, IrDA, SPI, UART, USART, USB
Real-Time Counter 16-bit RTC
External Bus Interface 1 interface
Paket 44-TQFP, 10 x 10 mm
Tipe Mounting Surface mount
Program Memory Type Flash
Flash Read-While-Write Supported

ATXMEGA64A4-AU 44-tqfp, 10 x 10 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk ATXMEGA64A4-AU (44-tqfp, 10 x 10 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 44-tqfp, 10 x 10 mm untuk ATXMEGA64A4-AU

Tidak ada data diatribut pin yang tersedia untuk ATXMEGA64A4-AU.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ATXMEGA64A4-AU cocok untuk 6 aplikasis: Industrial Automation Controller, Sensor Aggregation and Data Acquisition, Building Automation and HVAC Control, USB-Enabled Embedded Interface, Communications Equipment, Low-Power Control Panel.

🏭

Industrial Automation Controller

The ATXMEGA64A4-AU fits industrial automation controllers that need local control, event-driven timing, and several serial interfaces without a higher-power processor. Its 32 MHz AVR core provides up to 32 MIPS throughput, while five 16-bit timer/counter channels support timing and PWM tasks. The four-channel DMA controller and eight-channel event system reduce CPU intervention for periodic data movement, and five USARTs support sensors, drives, service consoles, or production equipment. With 64 KB Flash, the controller has room for networking, diagnostics, and update logic in one device.

🧩

Sensor Aggregation and Data Acquisition

The ATXMEGA64A4-AU is suitable for acquiring and processing signals from multiple sensors because it combines a 12-bit, 12-channel ADC with 34 general-purpose I/O lines. Its event system can synchronize ADC, timer, comparator, and communication activity, which is useful when measurements must align with a defined time window. The 32 MHz core provides processing headroom for filtering and control, while 2 KB EEPROM can retain calibration or configuration parameters. Firmware should define trigger sources, sampling latency, and overrun handling before relying on synchronized acquisition.

🏠

Building Automation and HVAC Control

The ATXMEGA64A4-AU works well in building automation equipment requiring multiple sensors, actuator outputs, and reliable serial connectivity. Its 34 I/O lines can support digital inputs, relay or valve-control outputs, and status indicators, while the PWM channels suit fan, pump, or valve actuator control. Five USARTs allow separate buses or service interfaces, and the 1.6 V to 3.6 V operating range fits low-voltage embedded power systems. Firmware should include watchdog recovery, communication fault handling, and safe actuator states during startup.

🔌

USB-Enabled Embedded Interface

The ATXMEGA64A4-AU can serve as the controller for a compact USB-enabled embedded interface because it combines USB with I2C, SPI, IrDA, UART, and USART connectivity. Its 32 MHz execution rate supports protocol handling and local control, while 64 KB Flash accommodates application firmware and USB descriptors. The 12-bit ADC can also support analog front-end monitoring without a separate MCU. Designers should follow the manufacturer datasheet for USB transceiver integration, clocking, decoupling, and signal-routing requirements.

🌐

Communications Equipment

The ATXMEGA64A4-AU is appropriate for small communications equipment that needs multiple serial interfaces and precise event handling. Five USARTs, SPI, I2C, IrDA, and USB allow the controller to coordinate radios, sensors, service interfaces, and host connections. Its eight-channel event system can route timer, comparator, ADC, and communication events without continuous polling, while DMA supports efficient data transfer. A 32 MHz clock and 64 KB Flash balance processing capability against memory use in compact embedded communication products.

📱

Low-Power Control Panel

The ATXMEGA64A4-AU fits compact control panels where a 44-TQFP package, local processing, and mixed analog and digital functions are valuable. Its 34 I/O lines can handle keys, indicators, sensors, and actuator outputs, while the 12-bit ADC supports analog controls. The event system and timer/counter blocks can implement debouncing, periodic measurement, and PWM without blocking the main loop. Low-power behavior must be evaluated with the exact sleep modes, clock settings, and peripheral states documented for the device.

What is the ATXMEGA64A4-AU?
The ATXMEGA64A4-AU is a Microchip Technology 8/16-bit AVR XMEGA A4 microcontroller operating at up to 32 MHz with 64 KB Flash, 4 KB SRAM, and 2 KB EEPROM. According to the manufacturer product page, it also includes 34 general-purpose I/O lines, a four-channel DMA controller, an eight-channel event system, and an external bus interface. The device is packaged in a 44-TQFP 10 x 10 mm surface-mount package.
What are the key specifications of ATXMEGA64A4-AU that engineers should know?
The ATXMEGA64A4-AU combines a 32 MHz enhanced AVR RISC core with 64 KB self-programming Flash, 4 KB SRAM, 2 KB EEPROM, and 34 I/O lines. The manufacturer product page specifies up to 32 MIPS throughput, a 12-bit 12-channel ADC, five 16-bit timer/counter channels, five USARTs, four-channel DMA, and an eight-channel event system. Its specified operating-voltage range is 1.6 V to 3.6 V.
What is the operating voltage of ATXMEGA64A4-AU?
The ATXMEGA64A4-AU operates from 1.6 V to 3.6 V. According to the manufacturer listing information, this is an 8/16-bit AVR XMEGA microcontroller with a 32 MHz maximum clock and 64 KB of Flash memory. Designers should keep the power supply and I/O levels within these limits across the complete operating-temperature range specified for the ordered device.
How much memory does ATXMEGA64A4-AU have?
The ATXMEGA64A4-AU provides 64 KB of self-programming Flash, a separate 4 KB boot-code section, 4 KB of SRAM, and 2 KB of EEPROM. The manufacturer product page identifies read-while-write capability and describes the device as an XMEGA A4U-family member with a 44-pin package. The boot-code section supports protected startup or loader code within the total Flash allocation.
Where can I download the ATXMEGA64A4-AU datasheet PDF?
The ATXMEGA64A4-AU datasheet PDF is available from Microchip Technology's official DeviceDoc link on this page. According to the manufacturer document, the XMEGA A4 family includes self-programming Flash with read-while-write, internal EEPROM and SRAM, a four-channel DMA controller, an eight-channel event system, 34 I/O lines, a 16-bit real-time counter, and five flexible 16-bit timer/counter channels.
Where can I find the ATXMEGA64A4-AU pinout and package details?
The ATXMEGA64A4-AU uses a 44-TQFP package measuring 10 x 10 mm, and its complete pin configuration should be taken from the pin-connection table in the manufacturer datasheet. The package includes 34 general-purpose I/O lines together with power, ground, clock, programming, and peripheral signals. Use the numbered package drawing when assigning PCB pads or planning the board-level footprint.
Where can I buy ATXMEGA64A4-AU online?
Use the Request a Quote form on this page to request ATXMEGA64A4-AU pricing, stock confirmation, and order routing. The component is specified as a Microchip Technology 44-TQFP, 32 MHz AVR XMEGA microcontroller with 64 KB Flash. A written quote allows the exact suffix, package, quantity, and delivery requirements to be checked before an order is placed.
What is the price of ATXMEGA64A4-AU?
Current ATXMEGA64A4-AU pricing is obtained through the Request a Quote form on this page. The quote should be tied to the exact ATXMEGA64A4-AU ordering code, 44-TQFP package, required quantity, and shipment destination. This approach also allows stock, lead time, and available shipping options to be confirmed at the time of quotation.
What is the lead time for ATXMEGA64A4-AU?
The current lead time for ATXMEGA64A4-AU should be confirmed through the Request a Quote form on this page. Include the required quantity, target delivery date, and shipment location in the request. Because availability can vary by package suffix and manufacturing channel, obtain a part-specific response before committing the production schedule.
Is ATXMEGA64A4-AU in stock?
ATXMEGA64A4-AU stock status should be checked through the Request a Quote form on this page. The part is an active Microchip Technology 44-TQFP microcontroller with 64 KB Flash and a 32 MHz clock. Request the exact quantity and delivery schedule so the response reflects the precise suffix and current channel availability.
What can replace ATXMEGA64A4-AU?
The closest documented replacement is the ATXMEGA64A4U-AU because both identify the 64 KB XMEGA A4U microcontroller in the 44-TQFP package. According to the manufacturer product page, the A4U family operates up to 32 MHz and includes 4 KB SRAM, 2 KB EEPROM, DMA, an event system, and an external bus interface. Firmware, clocking, and package-specific behavior should still be reviewed before substitution.
What is the best drop-in replacement for ATXMEGA64A4-AU?
The ATXMEGA64A4U-AU is the best supported drop-in candidate because it is identified as the same XMEGA A4U family in a 44-TQFP package, with matching 32 MHz performance and 64 KB Flash allocation. The manufacturer product page confirms 4 KB SRAM, 2 KB EEPROM, four-channel DMA, and an eight-channel event system. Confirm ordering-code details and validate the target board before approving a replacement.
Is ATXMEGA64A4-AU the same as ATXMEGA64A4U-AU?
The two MPNs appear as ordering variants for the 44-TQFP ATXMEGA64A4U microcontroller family, but they should not be treated as interchangeable without checking the manufacturer's ordering table. Both are associated with a 32 MHz clock and 64 KB Flash device. Compare package, temperature, traceability, and lifecycle codes in the official documentation before changing the production BOM.
When should I choose ATXMEGA64A4-AU over ATXMEGA32A4U-AU?
Choose ATXMEGA64A4-AU when the application benefits from 64 KB of Flash instead of the 32 KB available in ATXMEGA32A4U-AU. The target provides 4 KB SRAM, 2 KB EEPROM, a 12-bit ADC, DMA, and an event system, making it appropriate for larger firmware images and more complex control logic. Select the lower-memory device only after confirming that code size and application requirements fit within its limits.
What is the difference between ATXMEGA64A4-AU and ATXMEGA32A4U-AU?
The principal documented difference is Flash capacity: ATXMEGA64A4-AU provides 64 KB of self-programming Flash, while ATXMEGA32A4U-AU provides 32 KB. Both are XMEGA A4U-family AVR devices associated with the 44-pin packaging family and up to 32 MHz operation. The larger target can accommodate roughly twice the program-memory capacity, making firmware size the decisive selection criterion.

Data referensi engineering untuk ATXMEGA64A4-AU — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose ATXMEGA64A4-AU when an embedded design needs a compact 44-TQFP controller with a 32 MHz AVR core, 64 KB Flash, 4 KB SRAM, 2 KB EEPROM, 34 I/O lines, mixed serial interfaces, DMA, and an event system. It is particularly suitable for industrial control, acquisition, building automation, communications, and low-power control panels where firmware size and peripheral integration matter. The ATXMEGA64A4U-AU is the closest documented drop-in candidate for the same A4U family and package. Select ATXMEGA32A4U-AU instead when 32 KB of Flash is sufficient and lower memory usage is preferred, but verify that firmware, bootloader, diagnostics, and future updates will fit. A redesign may be preferable when the application requires substantially more Flash or SRAM than the ATXMEGA64A4-AU provides, because memory-capacity differences cannot be treated as pin-compatible substitutions.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ATXMEGA64A4U-AU
Package 44-TQFP (10 x 10 mm) 44-TQFP (10 x 10 mm)
Brand Microchip Technology Microchip Technology
Maximum Clock Frequency 32 MHz 32 MHz
Maximum Throughput 32 MIPS at 32 MHz 32 MIPS at 32 MHz
Flash Memory 64 KB 64 KB
Boot Code Section 4 KB 4 KB
SRAM 4 KB 4 KB
EEPROM 2 KB 2 KB
Operating Voltage Range 1.6 V to 3.6 V 1.6 V to 3.6 V
General-Purpose I/O 34 lines 34 lines
ADC 12-bit, 12 channels 12-bit, 12 channels
DMA Controller 4 channels 4 channels

Diferensiator Kunci

  • Larger Flash allocation within the same A4U family (vsATXMEGA32A4U-AU)
  • Event-driven peripheral integration (vsATXMEGA32A4U-AU)
  • Broad serial-interface integration (vsATXMEGA32A4U-AU)

Catatan Desain

Follow the manufacturer datasheet when assigning all 44 package pins and routing the 1.6 V to 3.6 V supply. Place the required bypass capacitors close to their associated supply pins, keep the ground return path compact, and preserve the recommended copper area under the TQFP footprint. Validate the board outline, pin-1 orientation, and pad geometry against the official package drawing before release.

Keep the 32 MHz clock circuit close to the controller and route it away from high-current switching nodes and fast communication edges. Use short ground references for clock and decoupling connections, avoid routing sensitive analog inputs beneath digital clock and bus traces, and maintain controlled return paths. If the design uses USB, follow the manufacturer recommendations for USB trace geometry, grounding, and adjacent decoupling.

Do not assume that every XMEGA A4 ordering code is an exact substitute. Confirm the package, temperature grade, memory configuration, and device behavior in the manufacturer ordering table before replacing a part. Also account for the 64 KB Flash limit when planning bootloader and application partitions, and use the documented boot-code section only within the device's complete memory map.

The controller supports a 1.6 V to 3.6 V operating range, but the selected supply voltage must satisfy every active peripheral, I/O standard, and external circuit. Check input thresholds and output-level compatibility before operating a pin at 5 V. Use a stable regulator with suitable transient response for clock startup and communication activity, and avoid designing the board around a nominal supply without accounting for its tolerance and load regulation.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance status was not explicitly stated in the product pages and datasheet excerpt. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals documentation for the exact ordering code before environmental or automotive release.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

ATXMEGA64A4-AU datasheet ATXMEGA64A4-AU pinout ATXMEGA64A4-AU datasheet pdf ATXMEGA64A4-AU specifications Microchip ATXMEGA64A4-AU ATXMEGA64A4 32MHz 64KB ATXMEGA64A4 44-TQFP ATXMEGA64A4 industrial controller ATXMEGA64A4-AU equivalent ATXMEGA64A4-AU replacement ATXMEGA64A4 vs ATXMEGA32A4 ATXMEGA64A4-AU price ATXMEGA64A4-AU stock ATXMEGA64A4-AU application circuit ATXMEGA64A4-AU programming

Komponen dan Istilah Terkait

Microchip Technology ATXMEGA64A4-AU ATXMEGA64A4U-AU ATXMEGA32A4U-AU ATXMEGA A4U AVR XMEGA 8/16-bit microcontroller enhanced AVR RISC architecture embedded processor semiconductor self-programming Flash read-while-write SRAM EEPROM direct memory access DMA event system 12-bit ADC USART I2C SPI IrDA USB 44-TQFP TQFP package family surface-mount package 32 MHz 32 MIPS industrial automation data acquisition building automation communications equipment low-power control panel RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ