ATXMEGA64A4-AU - 32MHz AVR XMEGA Microcontroller | Microchip
N.º da peça: ATXMEGA64A4-AU ✓ AtivoATXMEGA64A4-AU Visão geral
An 8/16-bit microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, data memory, and peripherals in one device. The AVR enhanced RISC architecture belongs to the broader embedded-control hierarchy: microcontroller → 8/16-bit MCU → embedded processor → semiconductor. XMEGA devices are designed for low-power industrial control, communications, data acquisition, and real-time peripheral-heavy systems.
Key features include 64 KB of self-programming Flash with read-while-write capability, a separate 4 KB boot-code section, 4 KB of SRAM, and 2 KB of EEPROM. The device provides 34 general-purpose I/O lines, a 12-channel 12-bit ADC, five flexible 16-bit timer/counter channels with PWM support, five USARTs, and communication interfaces including I2C, SPI, IrDA, and USB. A four-channel DMA controller and eight-channel event system help move data and synchronize peripherals without excessive CPU intervention.
The ATXMEGA64A4-AU combines an enhanced AVR RISC core with a peripheral set intended for embedded control rather than general-purpose computing. Its 32 MHz operating frequency provides up to 32 MIPS throughput, while the event system can route signals among timer, comparator, ADC, and communication resources. The external bus interface extends system connectivity when additional memory or peripherals are required.
Typical uses include industrial automation, building automation, sensor aggregation, data-acquisition systems, touch interfaces, communications equipment, and low-power embedded control. Its 34 I/O lines suit products requiring several digital interfaces, while the ADC and event system support mixed-signal and time-sensitive measurements. The USB interface can simplify connections to host systems when the selected board configuration includes the required support circuitry.
For layout, keep the 32 MHz clock and decoupling layout compact, observe all supply and ground-pin requirements, and follow the package pin-connection guidance in the manufacturer datasheet. Provide stable 1.6 V to 3.6 V operation across temperature, and verify the selected programming, crystal, and communication interfaces during firmware bring-up.
This page combines the manufacturer specifications, package and interface details, sourcing guidance, application analysis, and practical design considerations needed to evaluate the ATXMEGA64A4-AU for an embedded-control design.
Alternativas drop-in para ATXMEGA64A4-AU — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ATXMEGA64A4-AU (mesmo formato e footprint) — diferindo em Package, External Bus Interface, ADC, Product Type, EEPROM.
ATXMEGA64A4U-AU
✅ Drop-InConsulte o preço
Ver ficha técnica →ATXMEGA64A4-AU Classificações máximas e características elétricas
| Product Type | 8/16-bit AVR XMEGA A4 microcontroller |
| Frequência máxima de clock | 32 MHz |
| Maximum Throughput | 32 MIPS at 32 MHz |
| Flash Memory | 64 KB (32K x 16) |
| Boot Code Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 2 KB |
| Operating Voltage Range | 1.6 V to 3.6 V |
| General-Purpose I/O | 34 lines |
| ADC | 12-bit, 12 channels |
| Timer/Counters | 5 flexible 16-bit channels |
| PWM Channels | 16 channels |
| DMA Controller | 4 channels |
| Event System | 8 channels |
| Serial Communication Interfaces | I2C, IrDA, SPI, UART, USART, USB |
| Real-Time Counter | 16-bit RTC |
| External Bus Interface | 1 interface |
| Encapsulamento | 44-TQFP, 10 x 10 mm |
| Tipo de montagem | Surface mount |
| Program Memory Type | Flash |
| Flash Read-While-Write | Supported |
Guia de Configuração de Pinos do ATXMEGA64A4-AU 44-tqfp, 10 x 10 mm
Configuração de pinos para ATXMEGA64A4-AU (pacote 44-tqfp, 10 x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para ATXMEGA64A4-AU.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ATXMEGA64A4-AU é adequado para 6 aplicaçãos: Industrial Automation Controller, Sensor Aggregation and Data Acquisition, Building Automation and HVAC Control, USB-Enabled Embedded Interface, Communications Equipment, Low-Power Control Panel.
Industrial Automation Controller
The ATXMEGA64A4-AU fits industrial automation controllers that need local control, event-driven timing, and several serial interfaces without a higher-power processor. Its 32 MHz AVR core provides up to 32 MIPS throughput, while five 16-bit timer/counter channels support timing and PWM tasks. The four-channel DMA controller and eight-channel event system reduce CPU intervention for periodic data movement, and five USARTs support sensors, drives, service consoles, or production equipment. With 64 KB Flash, the controller has room for networking, diagnostics, and update logic in one device.
Sensor Aggregation and Data Acquisition
The ATXMEGA64A4-AU is suitable for acquiring and processing signals from multiple sensors because it combines a 12-bit, 12-channel ADC with 34 general-purpose I/O lines. Its event system can synchronize ADC, timer, comparator, and communication activity, which is useful when measurements must align with a defined time window. The 32 MHz core provides processing headroom for filtering and control, while 2 KB EEPROM can retain calibration or configuration parameters. Firmware should define trigger sources, sampling latency, and overrun handling before relying on synchronized acquisition.
Building Automation and HVAC Control
The ATXMEGA64A4-AU works well in building automation equipment requiring multiple sensors, actuator outputs, and reliable serial connectivity. Its 34 I/O lines can support digital inputs, relay or valve-control outputs, and status indicators, while the PWM channels suit fan, pump, or valve actuator control. Five USARTs allow separate buses or service interfaces, and the 1.6 V to 3.6 V operating range fits low-voltage embedded power systems. Firmware should include watchdog recovery, communication fault handling, and safe actuator states during startup.
USB-Enabled Embedded Interface
The ATXMEGA64A4-AU can serve as the controller for a compact USB-enabled embedded interface because it combines USB with I2C, SPI, IrDA, UART, and USART connectivity. Its 32 MHz execution rate supports protocol handling and local control, while 64 KB Flash accommodates application firmware and USB descriptors. The 12-bit ADC can also support analog front-end monitoring without a separate MCU. Designers should follow the manufacturer datasheet for USB transceiver integration, clocking, decoupling, and signal-routing requirements.
Communications Equipment
The ATXMEGA64A4-AU is appropriate for small communications equipment that needs multiple serial interfaces and precise event handling. Five USARTs, SPI, I2C, IrDA, and USB allow the controller to coordinate radios, sensors, service interfaces, and host connections. Its eight-channel event system can route timer, comparator, ADC, and communication events without continuous polling, while DMA supports efficient data transfer. A 32 MHz clock and 64 KB Flash balance processing capability against memory use in compact embedded communication products.
Low-Power Control Panel
The ATXMEGA64A4-AU fits compact control panels where a 44-TQFP package, local processing, and mixed analog and digital functions are valuable. Its 34 I/O lines can handle keys, indicators, sensors, and actuator outputs, while the 12-bit ADC supports analog controls. The event system and timer/counter blocks can implement debouncing, periodic measurement, and PWM without blocking the main loop. Low-power behavior must be evaluated with the exact sleep modes, clock settings, and peripheral states documented for the device.
Dados de referência de engenharia para ATXMEGA64A4-AU — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ATXMEGA64A4U-AU |
|---|---|---|
| Package | 44-TQFP (10 x 10 mm) | 44-TQFP (10 x 10 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 32 MHz | 32 MHz |
| Maximum Throughput | 32 MIPS at 32 MHz | 32 MIPS at 32 MHz |
| Flash Memory | 64 KB | 64 KB |
| Boot Code Section | 4 KB | 4 KB |
| SRAM | 4 KB | 4 KB |
| EEPROM | 2 KB | 2 KB |
| Operating Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| General-Purpose I/O | 34 lines | 34 lines |
| ADC | 12-bit, 12 channels | 12-bit, 12 channels |
| DMA Controller | 4 channels | 4 channels |
Principais diferenciais
- Larger Flash allocation within the same A4U family (vs ATXMEGA32A4U-AU)
- Event-driven peripheral integration (vs ATXMEGA32A4U-AU)
- Broad serial-interface integration (vs ATXMEGA32A4U-AU)
Notas de projeto
Follow the manufacturer datasheet when assigning all 44 package pins and routing the 1.6 V to 3.6 V supply. Place the required bypass capacitors close to their associated supply pins, keep the ground return path compact, and preserve the recommended copper area under the TQFP footprint. Validate the board outline, pin-1 orientation, and pad geometry against the official package drawing before release.
Keep the 32 MHz clock circuit close to the controller and route it away from high-current switching nodes and fast communication edges. Use short ground references for clock and decoupling connections, avoid routing sensitive analog inputs beneath digital clock and bus traces, and maintain controlled return paths. If the design uses USB, follow the manufacturer recommendations for USB trace geometry, grounding, and adjacent decoupling.
Do not assume that every XMEGA A4 ordering code is an exact substitute. Confirm the package, temperature grade, memory configuration, and device behavior in the manufacturer ordering table before replacing a part. Also account for the 64 KB Flash limit when planning bootloader and application partitions, and use the documented boot-code section only within the device's complete memory map.
The controller supports a 1.6 V to 3.6 V operating range, but the selected supply voltage must satisfy every active peripheral, I/O standard, and external circuit. Check input thresholds and output-level compatibility before operating a pin at 5 V. Use a stable regulator with suitable transient response for clock startup and communication activity, and avoid designing the board around a nominal supply without accounting for its tolerance and load regulation.
Informações de conformidade
Compliance status was not explicitly stated in the product pages and datasheet excerpt. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals documentation for the exact ordering code before environmental or automotive release.