BCM5464A1KRBG - Quad-Port Gigabit Ethernet PHY | Broadcom
MPN: BCM5464A1KRBG ✓ AktifBCM5464A1KRBG Ringkasan
A copper Ethernet PHY is the physical-layer component that translates digital Ethernet data into electrical signaling for transmission over twisted-pair cables and converts received signaling back into digital data. Within a network system, the PHY operates below the MAC and network-interface controller: Ethernet frames are generated above it, while magnetics, connectors, cable, and isolation components connect below it. A multi-channel PHY reduces the number of discrete PHY devices required in multiport equipment.
The BCM5464 provides four 10/100/1000BASE-T channels and supports full-duplex Gigabit operation according to the manufacturer’s BCM5464 product brief. Its consolidated implementation can simplify board partitioning compared with four separate single-channel PHYs. Parallel device availability across Broadcom’s BCM5404, BCM5414, BCM5421, BCM5421S, BCM5424, BCM5434, and BCM5464 products supports platform selection according to port count, media requirements, and system architecture.
Broadcom describes the BCM5464 family as a 0.13-micrometer Gigabit copper PHY optimized for performance, cost, and power in Gigabit copper solutions. That process generation is important when integrating the device: board design must account for high-speed differential routing, controlled impedance, clean power and ground distribution, adequate return paths, and thermal performance characteristic of a large 354-ball BGA.
Typical applications include multiport Ethernet switches, industrial Ethernet gateways, network-interface controllers, routers, digital video equipment, factory automation systems, and embedded platforms requiring several copper Gigabit ports. The device can also participate in designs that combine copper access with other network media when the surrounding controller supports mixed-media aggregation.
The primary design constraint is that BCM5464A1KRBG is a complex, high-pin-count BGA rather than a simple peripheral IC. Its layout should follow the manufacturer’s reference design and pin-assignment documentation, including ball-grid escaping, layer transitions, decoupling, clock requirements, and PHY-to-magnetics spacing. Confirm the exact exposed-pad and thermal-land requirements before releasing artwork.
This page combines the BCM5464 product-brief specifications with application guidance, selection criteria, engineering notes, and verified availability references. It also distinguishes confirmed substitutes from candidates whose package and pin compatibility still require engineering review, helping designers avoid treating merely similar Ethernet PHYs as drop-in replacements.
Alternatif penggantian untuk BCM5464A1KRBG — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifBCM5464A1KRBG Rating Maksimal & Karakteristik Listrik
| Product Type | Quad-port Gigabit copper Ethernet PHY |
| Number of Channels | 4 channels |
| Supported Data Rates | 10 Mb/s, 100 Mb/s, and 1000 Mb/s per channel |
| Ethernet Media | 10/100/1000BASE-T copper Ethernet |
| Duplex Support | Full duplex |
| Process Technology | 0.13 µm |
| Device Family | BCM54xx Gigabit copper PHY family |
| Package Type | 354-ball BGA |
| Terminal Count | 354 terminals |
| Package Mounting Type | Surface mount |
| Status RoHS | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
BCM5464A1KRBG surface mount Diamant Konfigurasi Panduan
Konfigurasi pin untuk BCM5464A1KRBG (surface mount pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk BCM5464A1KRBG.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
BCM5464A1KRBG cocok untuk 6 aplikasis: Multiport Gigabit Ethernet Switch, Industrial Ethernet Gateway, Network Interface Controller, Factory Automation Controller, Embedded Router and Gateway, Digital Video Network Appliance.
Multiport Gigabit Ethernet Switch
The BCM5464A1KRBG fits a switch or gateway requiring four copper Gigabit Ethernet ports. Its four-channel configuration consolidates the physical-layer transceivers needed for 10/100/1000BASE-T service while leaving frame processing and port arbitration to a compatible switch or MAC controller. In a typical implementation, each PHY channel connects through controlled-impedance traces to Ethernet magnetics and then to a shielded RJ45 or other connector. This arrangement reduces the number of separate copper PHY packages, although the 354-ball BGA still demands careful power delivery, clock distribution, thermal analysis, and high-speed routing. The device is most appropriate when four copper ports are required on the same board and the supporting controller supports the Broadcom PHY interface and register set.
Direkomendasikan
Industrial Ethernet Gateway
The BCM5464A1KRBG is suitable for an industrial gateway that must expose several 10/100/1000BASE-T service ports to controllers, sensors, supervisory systems, or service equipment. The four PHY channels allow a compact gateway architecture, while the surrounding processor handles protocols, data aggregation, security, and remote management. Industrial implementation requires checking the exact ordering code’s temperature rating and adding the required surge, ESD, isolation, grounding, and enclosure protection. Ethernet magnetics should be selected from the Broadcom-supported design space, and PCB layout should preserve controlled impedance and separation between channels. Firmware must also validate auto-negotiation, link-speed transitions, error counters, and recovery behavior across the operating temperature range and long cable lengths expected in industrial environments.
Direkomendasikan
Network Interface Controller
The BCM5464A1KRBG can provide four physical-layer channels for a multiport network-interface controller used in routers, embedded gateways, and communication appliances. The PHY handles physical signaling across copper links, while the host controller or network processor handles packet queues, address tables, traffic management, and control-plane protocols. Because BCM5464A1KRBG is a 354-ball BGA, the design must include a high-density escape strategy, multiple supply rails, low-noise clock distribution, and adequate thermal spreading through the PCB. A reference-design-based layout reduces risk around analog isolation, digital control, and line-side interfaces. Firmware should exercise all supported rates, verify auto-negotiation, monitor PHY registers for link and error events, and define recovery behavior if a channel is disconnected or reinserted during operation.
Direkomendasikan
Factory Automation Controller
The BCM5464A1KRBG can support factory automation equipment that connects programmable logic controllers, motion controllers, vision processors, remote I/O, and service tools over copper Ethernet. Four independent 10/100/1000BASE-T channels provide flexibility for machine-to-machine communication and diagnostics without requiring four separate PHY packages. Industrial qualification remains the dominant design concern: confirm the temperature range, maintain deterministic grounding between the PHY, magnetics, and connector, and protect each line from industrial transients. The PCB should keep sensitive digital and clock routes away from line-side surge paths, while retaining continuous reference planes beneath differential pairs. Firmware can use the PHY management interface for link status, speed selection, diagnostics, and controlled shutdown, allowing the automation controller to report network faults without disrupting unrelated machine functions.
Direkomendasikan
Embedded Router and Gateway
The BCM5464A1KRBG is appropriate for embedded routers and communication gateways that expose multiple copper Ethernet links to local equipment while using an internal processor for routing and management. Its four Gigabit channels allow simultaneous service connectivity when link demand justifies the integration. The surrounding design should implement separate clock and supply domains carefully, use low-inductance decoupling close to the relevant BGA balls, and connect the PHY’s management signals to the host controller through appropriately buffered or properly terminated interfaces. Line-side magnetics and connectors must support the intended data rate, isolation, and environmental requirements. Validation should include packet-loop tests at 10 Mb/s, 100 Mb/s, and 1000 Mb/s, cable insertion tests, thermal operation, recovery after link loss, and interoperability testing with representative switches and endpoint equipment.
Direkomendasikan
Digital Video Network Appliance
The BCM5464A1KRBG can serve a digital video appliance that bridges imaging, storage, control, and monitoring networks over copper Ethernet. Four channels support connections to cameras, display controllers, storage systems, and management hosts when those endpoints use 10/100/1000BASE-T. The multi-channel PHY supports a consolidated hardware approach, but video-network quality also depends on correct packet buffering and traffic prioritization in the host controller; PHY selection alone does not guarantee latency or frame throughput. Keep sensitive video and memory circuitry away from line-side protection components, preserve short return paths beneath high-speed traces, and validate radiated emissions because Ethernet magnetics, connectors, switching regulators, and the large BGA can contribute to electromagnetic coupling. Production testing should exercise link negotiation at all supported rates and verify stable operation over the required temperature and cable-length range.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk BCM5464A1KRBG — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Package | 354-ball BGA |
| Brand | Broadcom |
| Product Type | Quad-port Gigabit copper Ethernet PHY |
| Channel Count | 4 channels |
| Supported Data Rates | 10 Mb/s, 100 Mb/s, and 1000 Mb/s per channel |
| Ethernet Media | 10/100/1000BASE-T |
| Process Technology | 0.13 µm |
| Device Family | BCM54xx Gigabit copper PHY family |
Diferensiator Kunci
- Four copper Gigabit channels in one device (vsDP83864AUT)
- Established Broadcom BCM54xx integration family (vsBCM54140B0KFBG)
- Four-channel architecture reduces PHY package count (vsWPCS4317C.B0-900214)
Catatan Desain
Use the Broadcom reference layout as the baseline for the 354-ball BGA rather than designing a new escape pattern. Preserve uninterrupted ground references beneath every high-speed differential pair, route the four channels with controlled impedance, and avoid plane splits that interrupt return current. Confirm ball assignments, power-ball connectivity, and exposed-pad treatment from the complete package documentation before schematic release. A small change in BGA fanout can degrade power-integrity behavior or introduce unequal insertion loss between copper Ethernet channels.
Treat the analog, digital, and clock-supply domains as separate delivery problems until the official schematic identifies their exact relationships. Place local ceramic decoupling directly at the relevant supply balls, provide low-impedance plane connections, and verify simultaneous four-channel Gigabit operation at the worst-case temperature. Check startup sequencing, current sharing across multiple power balls, and the regulator’s transient response against the exact limits in the complete Broadcom documentation. Do not infer supply values from the product family name or distributor metadata.
Keep each PHY channel’s line-side path symmetrical and electrically short from the BGA through the magnetics to the connector. Follow the manufacturer’s recommended magnetics and component placement, maintain the specified channel spacing, and place surge or ESD protection components where their parasitic capacitance will not materially distort the Ethernet signal. Use a continuous reference plane and controlled-impedance fabrication rules, and inspect the finished assembly for accidental via stubs, impedance discontinuities, and grounding gaps.
Model the BGA’s heat flow with the actual PCB stack-up, copper distribution, enclosure, and expected traffic rather than relying on a generic junction-temperature margin. Distribute return currents across the package’s ground and thermal structures, monitor hot spots during four-port full-rate operation, and verify operation at the maximum ambient temperature required by the product. If the exact ordering code has a limited temperature rating, include thermal throttling, airflow, or enclosure upgrades in the system design instead of treating a room-temperature test as production proof.
Informasi Konformitas
The Broadcom product brief does not establish the exact BCM5464A1KRBG ordering code’s environmental declarations. The parts-classification source describes BCM5464 as active, lists a 5A991.b.1 classification, and reports a halogen-free status of not compliant, but that generic record is not sufficient to assign the full ordering-code compliance profile.