Broadcom

BCM5482SA2KFB - Dual-Port 10/100/1000BASE-T PHY | Broadcom

MPN: BCM5482SA2KFB ✓ Aktif
10/100/1000BASE-T Rds(on)
MOQ: 1 |
Datasheet Tidak Tersedia Cari Datasheet
Lihat Alternatif

BCM5482SA2KFB Ringkasan

The Broadcom BCM5482SA2KFB is a dual-port 10/100/1000BASE-T Ethernet physical-layer transceiver designed for copper network connections. It supports three data rates—10 Mb/s, 100 Mb/s, and 1000 Mb/s—across two integrated ports. The exact package dimensions, pin configuration, electrical limits, and environmental ratings must be confirmed in the Broadcom manufacturer datasheet before PCB release or production use.

An Ethernet physical-layer transceiver, commonly called a PHY, converts serialized digital data into electrical signaling for transmission over twisted-pair copper cables. The BCM5482SA2KFB belongs to the PHY hierarchy within Ethernet interface ICs, which connect a digital MAC or network processor to physical copper media. Supporting 10, 100, and 1000 Mb/s allows one device to serve multiple speed requirements within a dual-port design.

The principal feature of the BCM5482SA2KFB is integration of two 10/100/1000BASE-T ports in one component. This can reduce the number of separate Ethernet PHY devices required in a network interface, switch, router, or industrial controller. Its multi-rate support also allows equipment to negotiate the highest common link speed supported by both connected devices rather than requiring separate interfaces for Fast Ethernet and Gigabit Ethernet.

As an Ethernet interface IC, the BCM5482SA2KFB is intended to support copper-based data links used in local-area networks. Its two-port architecture is useful where board space is constrained but two independent network connections are needed. Compared with a single-port PHY arrangement, a dual-port device can simplify routing and component placement, although the final signal-integrity design still depends on the magnetic interface, connector layout, cable requirements, and impedance-controlled PCB construction.

Typical applications include industrial Ethernet switches, routers, network interface controllers, embedded communication equipment, and control systems with multiple copper Ethernet ports. The 10/100/1000BASE-T capability makes the part relevant to factory automation, building controls, network appliances, test equipment, and embedded platforms that must accommodate legacy 10 Mb/s or 100 Mb/s links as well as Gigabit Ethernet connections.

Use the manufacturer datasheet's pin-description and reference-circuit sections when assigning power, ground, clock, digital-interface, and analog-network signals. High-speed copper pairs require controlled impedance and careful separation from noisy digital or switching-converter paths. Component placement and magnetic-interface design should be reviewed against the manufacturer's layout guidance before production, especially when two high-speed ports share a compact board area.

This product page organizes the available BCM5482SA2KFB information, identifies same-family Broadcom candidates, and provides engineering-focused selection guidance. Confirm package, pinout, clock requirements, register programming, power sequencing, environmental limits, and lifecycle status against the exact Broadcom datasheet and ordering information before committing a design to production.

Alternatif penggantian untuk BCM5482SA2KFB — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

BCM5482SA2KFBG

✅ Drop-In
📦 [DATA_NEEDED: confirmed package]
Final ordering suffix differs by one character; the available listing does not quantify whether package, grade, or packing changes

📋 Alternatif referensi (tidak dalam katalog)

BCM5482SEA2KFBG

✅ Drop-In
📦 [DATA_NEEDED: confirmed package]
The S/A ordering segment differs from BCM5482SA2KFB; revision, qualification, and electrical differences are not quantified in the available cross-reference result

📋 Alternatif referensi (tidak dalam katalog)

BCM5482SA2KFB Rating Maksimal & Karakteristik Listrik

Product Type Dual-port 10/100/1000BASE-T Ethernet PHY
Manufacturer Broadcom Limited
Number of Ports 2 ports
Supported Data Rates 10 Mb/s, 100 Mb/s, and 1000 Mb/s
Ethernet Standards 10/100/1000BASE-T
Physical Medium Twisted-pair copper Ethernet
Port Architecture Dual port
Interface Classification Ethernet physical-layer transceiver

BCM5482SA2KFB standard Diamant Konfigurasi Panduan

Konfigurasi pin untuk BCM5482SA2KFB (standard pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai standard untuk BCM5482SA2KFB

Tidak ada data diatribut pin yang tersedia untuk BCM5482SA2KFB.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

BCM5482SA2KFB cocok untuk 6 aplikasis: Industrial Ethernet Switch, Industrial Router, Embedded Network Controller, Building Automation Gateway, Network Test Equipment, Network Appliance.

🏭

Industrial Ethernet Switch

The BCM5482SA2KFB fits a compact industrial switch that needs two copper Ethernet links. Its dual 10/100/1000BASE-T capability allows each port to negotiate among 10 Mb/s, 100 Mb/s, and 1000 Mb/s, which supports both legacy devices and modern high-speed equipment on the same board. The device can simplify front-panel port implementation compared with two separate single-port PHYs. Board design must still provide approved magnetic interfaces, controlled-impedance differential pairs, proper isolation, and the power and clocking architecture required by the exact Broadcom datasheet.

🌐

Industrial Router

The BCM5482SA2KFB is suitable for an industrial router or gateway with two copper Ethernet interfaces. Supporting 10BASE-T, 100BASE-T, and 1000BASE-T on both channels allows the equipment to connect to management networks, controllers, and plant-floor systems operating at different speeds. Two integrated PHYs can reduce the number of separate transceiver components, but the host processor must provide a compatible digital interface and clocking arrangement. Validate magnetics, isolation, surge exposure, thermal performance, and cable reach against the manufacturer reference design.

🧩

Embedded Network Controller

The BCM5482SA2KFB can provide two physical copper-network connections for an embedded Linux controller, automation processor, or communications appliance. A multi-rate PHY supports legacy 10 Mb/s and 100 Mb/s links as well as 1 Gb/s links without assigning separate copper PHYs to each speed. The controller still requires the appropriate host bus, interrupt, reset, clock, and firmware configuration described in the exact datasheet. Layout should isolate the high-speed copper interface from processor supplies and digital timing paths.

🏠

Building Automation Gateway

The BCM5482SA2KFB fits a building-automation gateway needing wired Ethernet connectivity on two ports. One channel can serve a local controller or service network while the other connects to a building LAN, and 10/100/1000BASE-T support accommodates widely varying equipment capabilities. Because building gateways may connect to long cable runs or mixed legacy networks, verify supported media, auto-negotiation behavior, isolation, and electrostatic-discharge requirements in the Broadcom documentation. Keep copper-pair routing away from switching regulators and relay-control paths.

📡

Network Test Equipment

The BCM5482SA2KFB is applicable to network test equipment requiring two independently instrumented 10/100/1000BASE-T interfaces. Multi-rate support allows the same hardware to test legacy and Gigabit Ethernet links, while the two-port arrangement supports loopback, endpoint, and traffic-generation configurations. Measurement accuracy and protocol testing depend on the surrounding host electronics, magnetic network interface, clocks, and firmware rather than the PHY alone. Confirm the exact electrical characteristics and reference configuration before using the device in calibrated test paths.

🖥️

Network Appliance

The BCM5482SA2KFB is useful in compact network appliances, gateways, and edge devices that expose two copper Ethernet connections. Supporting 10, 100, and 1000 Mb/s preserves compatibility with older management devices while supporting Gigabit Ethernet for primary traffic. Integration reduces the physical footprint required for dual-port Ethernet connectivity, subject to confirming the package and thermal design. Production implementation should follow the manufacturer's recommended magnetics, controlled-impedance geometry, power filtering, and isolation spacing to preserve signal integrity.

Ringkasan Produk Direkomendasikan

BCM5482SA2KFB Broadcom Digunakan di dalam: Industrial Ethernet Switch, Industrial Router, Embedded Network Controller, Building Automation Gateway, Network Test Equipment, Network Appliance BCM5482SA2KFBG Closely related Broadcom ordering candidate Digunakan di dalam: Industrial Ethernet Switch, Embedded Network Controller, Network Test Equipment BCM5482SEA2KFBG Broadcom family candidate for cross-reference review Digunakan di dalam: Industrial Router, Building Automation Gateway, Network Appliance
What is the Broadcom BCM5482SA2KFB?
The Broadcom BCM5482SA2KFB is a dual-port Ethernet physical-layer transceiver supporting 10/100/1000BASE-T data rates. It provides two copper Ethernet channels in one device for systems that need multiple network links without using separate single-port PHYs. The Broadcom product description identifies it as a dual-port 10/100/1000BASE-T PH. Consult the exact manufacturer datasheet for pin assignments, electrical limits, and the supported digital host interface.
What data rates does the BCM5482SA2KFB support?
The BCM5482SA2KFB supports 10 Mb/s, 100 Mb/s, and 1000 Mb/s Ethernet operation. These rates correspond to 10BASE-T, 100BASE-T, and 1000BASE-T within the device's stated 10/100/1000BASE-T capability. This multi-rate support is useful for products that must communicate with legacy Fast Ethernet equipment as well as modern Gigabit Ethernet endpoints. Verify media and auto-negotiation details in the manufacturer documentation.
Why choose a dual-port Ethernet PHY for an industrial design?
A dual-port PHY can simplify boards that need two copper Ethernet connections, reducing component count and simplifying routing compared with two separate single-port devices. The BCM5482SA2KFB provides two 10/100/1000BASE-T channels in one component, making it relevant to industrial controllers, communication equipment, and compact network appliances. The board still needs compliant magnetics or an approved integrated magnetic solution, controlled-impedance traces, and careful isolation of sensitive analog and high-speed signals.
Where can I download the BCM5482SA2KFB datasheet PDF?
Download the BCM5482SA2KFB datasheet from Broadcom's technical documentation and confirm that the document covers the exact BCM5482SA2KFB ordering suffix. Datasheet indexes and distributor product pages can help locate the file, but the Broadcom document should be the controlling source for pinout, register definitions, electrical characteristics, reference circuitry, and recommended layout. Obtain the current document before assigning PCB nets or configuring production test equipment.
Where can I find the BCM5482SA2KFB pinout and package drawing?
The BCM5482SA2KFB pinout and package drawing must be taken from the exact Broadcom manufacturer datasheet because the package type, pin count, exposed-pad arrangement, and dimension symbols are not established by the product listing alone. Use the pin-description table and package outline in the same document revision, then cross-check pin 1 orientation and land patterns against the approved PCB footprint. Do not infer the footprint from a similar BCM5482 suffix.
Is the BCM5482SA2KFB suitable for a router or switch design?
The BCM5482SA2KFB is suitable for a router, switch, or network interface card requiring two 10/100/1000BASE-T copper ports. Its two integrated ports and support for 10, 100, and 1000 Mb/s provide the core physical-layer function needed by multi-speed Ethernet equipment. Final suitability depends on the required RGMII, GMII, MII, or other host-interface details, clock architecture, thermal design, and regulatory-performance targets in the manufacturer documentation.
How do BCM5482SA2KFB and BCM5482SA2KFBG differ?
BCM5482SA2KFBG is a closely related Broadcom ordering variant, but the suffix difference must be interpreted from Broadcom's ordering information before treating it as interchangeable. The available product information does not establish whether the final suffix changes package, environmental grade, packing, or another commercial attribute. Verify the exact datasheet, package drawing, and ordering code; the two MPNs should not be considered drop-in equivalents until that comparison is complete.
Can BCM5482SEA2KFBG replace BCM5482SA2KFB?
BCM5482SEA2KFBG cannot be confirmed as a drop-in replacement for BCM5482SA2KFB from the available ordering information alone. The differing S/A suffix may affect device revision, qualification, or another ordering attribute, and the exact package and pin compatibility have not been established. Review Broadcom's product documentation and cross-reference data, then compare pinout, electrical ratings, host interface, firmware or register requirements, and lifecycle status before substitution.
What can replace the BCM5482SA2KFB?
No verified drop-in replacement can be selected for the BCM5482SA2KFB from the available component information. A replacement must use the same package and land pattern, remain pin-to-pin compatible, and match critical parameters such as port count, supported 10/100/1000BASE-T rates, host interface, supply voltage, clocking, and thermal rating. Broadcom family candidates require confirmation, while a cross-brand substitute requires direct manufacturer evidence of compatibility rather than a general functional match.
When should I choose BCM5482SA2KFB over a single-port PHY?
Choose the BCM5482SA2KFB when the design requires two 10/100/1000BASE-T copper ports on the same board. A single-port PHY may be preferable when only one link is needed or when its host interface, supply architecture, package, or power rating better matches the design. The key decision is functional and mechanical: both ports must share a suitable host interface and clock arrangement, and the selected package must fit the available board area.
Is BCM5482SA2KFB the same as BCM5482SA2KFBG?
The two Broadcom MPNs are closely related but should not be assumed identical without checking the ordering code and exact datasheet. The available information associates BCM5482SA2KFB with the requested device and separately identifies BCM5482SA2KFBG as a datasheet listing, without defining the final suffix. Confirm package, temperature grade, packing, qualification, and lifecycle status for each suffix before treating them as the same manufactured configuration.
What is the best Broadcom equivalent for BCM5482SA2KFB?
The closest Broadcom candidates are BCM5482SA2KFBG and BCM5482SEA2KFBG, but neither can be designated a confirmed drop-in equivalent without a manufacturer package-and-pin comparison. For this network-interface role, compatibility must cover the 48-pin or actual package footprint, two copper ports, 10/100/1000BASE-T operation, host interface, clocking, supply rails, and thermal requirements. Use the exact Broadcom ordering guide and datasheet to establish interchangeability.
Where can I request a quote for BCM5482SA2KFB?
Use the Request a Quote form on this page to request BCM5482SA2KFB pricing, current availability, lot-related information, and delivery scheduling. Stock and lead time can change by package suffix, manufacturing lot, and order quantity, so request the exact MPN and required quantity. The form is the appropriate route for a current commercial quotation without relying on a potentially stale catalog price.
How long is the lead time for BCM5482SA2KFB?
The current BCM5482SA2KFB lead time depends on exact suffix, requested quantity, package configuration, and production scheduling, so it must be confirmed through the Request a Quote form on this page. Provide the target quantity and required delivery date to obtain a specific commitment. Do not base a project schedule on generic stock indicators because allocation and replenishment can vary across Broadcom network-interface products.
What are the key specifications engineers should know about BCM5482SA2KFB?
The key published specifications are two integrated Ethernet ports and support for 10BASE-T, 100BASE-T, and 1000BASE-T operation, equivalent to 10 Mb/s, 100 Mb/s, and 1000 Mb/s. The device is positioned as a copper Ethernet physical-layer transceiver. Package dimensions, supply voltage, host interface, clock requirements, thermal data, pinout, and environmental ratings must be taken from the exact Broadcom manufacturer datasheet before schematic and layout release.

Data referensi engineering untuk BCM5482SA2KFB — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose BCM5482SA2KFB when the board needs two copper Ethernet connections and must support 10, 100, and 1000 Mb/s operation. Its dual-port architecture is especially useful in industrial controllers, routers, network appliances, and test equipment where board area and component count matter. A single-port PHY is preferable when only one link is required or when its host interface, package, supply arrangement, or thermal rating provides a closer match. BCM5482SA2KFBG and BCM5482SEA2KFBG are useful same-family candidates for evaluation, but their ordering suffixes must be reconciled with Broadcom's documentation before they are treated as drop-in replacements. No verified cross-brand substitute was established. Final selection requires confirmation of the exact package, land pattern, digital interface, clocking, supply rails, environmental rating, magnetics, and lifecycle status.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini BCM5482SA2KFBG BCM5482SEA2KFBG
Brand Broadcom Broadcom Broadcom
Port Count 2 ports 2 ports 2 ports
Supported Data Rates 10 Mb/s, 100 Mb/s, and 1000 Mb/s 10 Mb/s, 100 Mb/s, and 1000 Mb/s 10 Mb/s, 100 Mb/s, and 1000 Mb/s
Ethernet Support 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T
Physical Medium Twisted-pair copper Ethernet Twisted-pair copper Ethernet Twisted-pair copper Ethernet
Ordering Suffix SA2KFB SA2KFBG; final suffix function is not quantified SEA2KFBG; S/A segment differs from the target

Diferensiator Kunci

  • Two integrated multi-rate copper ports (vsA conventional single-port Ethernet PHY)
  • One device supports three Ethernet rates (vsSingle-rate 10BASE-T or 100BASE-T interface)
  • Dual-port integration reduces board-level PHY count (vsTwo discrete single-port PHYs)

Catatan Desain

Route each 1000BASE-T differential pair as a controlled-impedance structure and follow the manufacturer's recommended pair geometry, spacing, and via rules. Keep the PHY-to-magnetics path short, place magnetics close to the connector when the reference design specifies that arrangement, and avoid stubs. Two adjacent ports require deliberate partition spacing so crosstalk and connector or magnetics-related discontinuities do not degrade the high-speed return loss and insertion-loss targets.

Implement separate filtering paths for the PHY's analog and digital supply domains as shown in the manufacturer reference circuit. Place the required bulk and high-frequency decoupling capacitors close to their associated power pins, with short ground returns and a low-impedance ground plane. Confirm the permitted voltage, sequencing, current limits, and exposed-pad connection in the exact datasheet before selecting regulators or setting undervoltage thresholds.

Preserve the reference clock and high-speed digital interface by keeping them away from the copper-pair and magnetics area. Use the manufacturer's specified clock source, jitter expectations, grounding, and termination arrangement rather than inferring them from a generic Ethernet design. Review crosstalk, return loss, insertion loss, and cable reach for all three supported data rates, with particular attention to 1000BASE-T operation.

Do not treat a similar Broadcom suffix as automatically interchangeable. Confirm the exact package, pinout, order code, electrical ratings, interface mode, and environmental qualification for BCM5482SA2KFB, BCM5482SA2KFBG, or BCM5482SEA2KFBG. Also avoid approving a footprint from the product description alone; obtain the current package drawing and land pattern for the exact manufacturing suffix.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes were not identified in the available product information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from Broadcom's current product declaration for the exact MPN.

Data disahkan pada: 2026-11-20 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

BCM5482SA2KFB datasheet BCM5482SA2KFB pinout BCM5482SA2KFB datasheet pdf BCM5482SA2KFB equivalent BCM5482SA2KFB replacement BCM5482SA2KFB cross reference BCM5482SA2KFB price BCM5482SA2KFB stock Broadcom BCM5482SA2KFB BCM5482SA2KFB vs BCM5482SA2KFBG BCM5482SA2KFB footprint BCM5482SA2KFB application circuit

Komponen dan Istilah Terkait

Broadcom BCM5482SA2KFB BCM5482SA2KFBG BCM5482SEA2KFBG Ethernet PHY physical-layer transceiver dual-port Ethernet 10BASE-T 100BASE-T 1000BASE-T Gigabit Ethernet Fast Ethernet twisted-pair copper Ethernet interface IC network interface controller industrial switch industrial router network appliance host interface reference clock magnetics controlled impedance differential pair signal integrity power-management IC
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ