CD4017BCN - 5-Stage Decade Counter | Fairchild | DIP-16
MPN: CD4017BCN ✓ AktifCD4017BCN Ringkasan
A Johnson counter is a type of digital counter built from sequential logic stages that produce a predictable sequence of decoded outputs. The CD4017BCN belongs to the CD4000 CMOS logic family, where the product hierarchy is decade counter > counter/divider > logic IC > integrated circuit > semiconductor. Its decoded outputs reduce the need for external binary decoding logic, simplifying designs that must select one of ten sequential states. The carry-out bit can also be used to detect the transition from the ninth state to the reset state.
The principal operating characteristics are the 3.0 V to 15 V supply range, 5-stage counter organization, 10 decoded outputs, carry-out function, and 16-pin PDIP package. The CD4017BCN is intended for applications where a low-voltage CMOS counter is acceptable and where a through-hole package simplifies assembly, prototyping, repair, and manual inspection. Its sequential outputs are useful for rotary stepping, automatic test sequencing, and control systems that need a one-of-ten selection rather than a complete binary bus.
CD4017BCN should be selected when the design requires a decade counter with ten mutually decoded outputs. The clock, reset, and carry signals provide the basic digital control interface, while the decoded outputs can drive discrete transistors, relays, LEDs, or other load stages. Designers should account for the allowable supply voltage, clock signal timing, reset behavior, output current, and the electrical limits of any driven load. Because this is a logic counter rather than a power device, its SOA data is not applicable, and the device should be evaluated as a CMOS digital IC rather than a power semiconductor.
Typical applications include stepper-motor pulse sequencing, programmable timer controllers, decade-based relay logic, LED chase and display sequencing, industrial automation interfaces, and electronic test equipment. The 10 decoded outputs are particularly helpful when a system must activate exactly one stage during each count. External driver circuitry may be required when the outputs must control motors, high-current lamps, or inductive loads rather than remain within the logic-device current limits.
For PCB layout, place the clock and reset inputs so that switching transients do not couple into adjacent signal traces. Keep output loads close to their associated driver circuits and use appropriate decoupling at the power pins. When substituting components, verify that the replacement has the same 16-pin PDIP footprint, the same clock and reset pin assignments, compatible supply-voltage limits, and equivalent decoded-output timing. A mechanically similar package is not sufficient unless its electrical interface and pinout are confirmed.
This page combines the verified CD4017BCN function, supply-range, package, and sourcing information with practical replacement and design guidance. It also distinguishes the useful features of the decade counter from common selection mistakes, including assuming that a decoded output can directly drive a high-current load or that any similar 16-pin counter has the same reset and clock behavior.
Alternatif penggantian untuk CD4017BCN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian CD4017BCN (sama faktor bentuk dan footprint) — berbeda di dalam Logic Family, Carry Output, Package, Reset Function, Mounting Type.
CD4017BE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC14017BCPG
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MN4017B
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CD4017BE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC14017BCPG
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CD4017BCN Rating Maksimal & Karakteristik Listrik
| Fungsi | 5-stage divide-by-10 Johnson counter |
| Decoded Outputs | 10 outputs |
| Carry Output | 1 carry-out bit |
| Supply Voltage Range | 3.0 V to 15 V |
| Logic Family | CD4000 CMOS logic |
| Count Sequence | Decade counting, divide-by-10 |
| Paket | 16-pin PDIP |
| Tipe Mounting | Through-hole |
| Jumlah Pin | 16 pins |
| Tipe Output | Decoded counter outputs |
| Reset Function | Reset to zero count |
| Clock Input | 1 clock input |
CD4017BCN 16-pin pdip Diamant Konfigurasi Panduan
Konfigurasi pin untuk CD4017BCN (16-pin pdip pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk CD4017BCN.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
CD4017BCN cocok untuk 6 aplikasis: Stepper-Motor Sequencing, Industrial Relay Sequencing, LED Chase and Display Sequencing, Programmable Timer Controller, Electronic Test Equipment, Automation and Digital Control.
Stepper-Motor Sequencing
The CD4017BCN is suitable for generating a repeatable ten-state sequence in stepper-motor control and rotary actuator systems. Its 3.0 V to 15 V supply range and ten decoded outputs let a controller activate one selected phase or driver stage per clock transition. The carry-out bit can identify the wraparound point for synchronization. External transistors or dedicated motor-driver circuits should provide the required current and inductive-energy protection; the CD4017BCN is the sequencing logic, not the motor power stage.
Direkomendasikan
Industrial Relay Sequencing
Use the CD4017BCN in industrial control panels where one of ten outputs must be selected for each successive command. The decoded outputs simplify relay-driver logic because the counter directly identifies the active sequence position, while the carry output can be used for repeat-cycle detection. With a 3.0 V to 15 V operating range, the device is appropriate for conventional CMOS control systems. Add isolation, flyback protection, and appropriate transistor drive when switching inductive relays rather than driving loads directly from the logic outputs.
Direkomendasikan
LED Chase and Display Sequencing
The CD4017BCN can implement one-of-ten LED or lamp sequences because each decoded output represents a different decade position. The carry-out signal provides a convenient point for resetting or restarting the pattern, and the device operates from 3.0 V to 15 V for compatibility with common CMOS logic rails. For visible LED indicators, use suitable current-limiting resistors and buffer the outputs when required. For higher-current lighting, use transistor or MOSFET driver stages and verify timing margins against the load’s switching requirements.
Direkomendasikan
Programmable Timer Controller
The CD4017BCN works as the decade-sequencing element of a programmable timer or interval controller. Each clock pulse advances the output position, allowing a system to divide time into ten selectable intervals or coordinate recurring stages. The carry-out output can trigger a reset, latch, or downstream event at the end of the sequence. Clock-source accuracy, reset timing, and propagation delay determine the usable timing precision, so designers should check the manufacturer timing characteristics when operating near the maximum clock rate.
Direkomendasikan
Electronic Test Equipment
A decade counter is useful in test fixtures and automatic test equipment for stepping through measurement, relay, or stimulus positions. The CD4017BCN provides ten decoded outputs and a carry signal, allowing a fixture to present a predictable sequence without a complete binary decoder. Its 16-pin PDIP package is convenient for prototyping and through-hole test boards. Validate clock edge requirements, reset pulse width, output timing, and load capacitance before using the device in high-speed automated systems.
Direkomendasikan
Automation and Digital Control
The CD4017BCN can serve as a simple state sequencer in automation equipment, where ten outputs represent distinct process steps. Clocking from a controller or precision timer advances the sequence, and the decoded outputs can gate discrete actuators, indicators, or data-capture stages. The 3.0 V to 15 V supply range supports common control-system rails, while the carry output provides a useful boundary event. Robust designs should include reset-state initialization, fault handling, and appropriate protection around inductive or high-energy loads.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk CD4017BCN — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | CD4017BE | MC14017BCPG | MN4017B |
|---|---|---|---|---|
| Package | 16-pin PDIP | DIP-16 | DIP-16 | DIP-16 |
| Number of Pins | 16 | 16 | 16 | 16 |
Diferensiator Kunci
- Direct decade-state decoding (vsCD4017BE)
- Wide verified CMOS supply range (vsMC14017BCPG)
- Through-hole DIP implementation (vsMN4017B)
Catatan Desain
Keep the CD4017BCN supply within its verified 3.0 V to 15 V range and place a local supply bypass capacitor close to the device power pins. Use separate clock and reset routing to prevent switching transients from changing the count state. Because the decoded outputs may drive external logic or driver stages, calculate the required sink or source current against the manufacturer output-current limits rather than assuming the counter can directly power motors, relays, or lamp arrays.
Use the numbered 16-pin PDIP footprint and follow the manufacturer pin table for clock, reset, carry, and decoded-output assignments. Keep the clock trace short, provide a defined reset state, and route sensitive control signals away from relay-coil and motor-driver switching nodes. In a mixed-signal or industrial enclosure, separate the counter's ground reference from high-current return paths where practical so output transitions do not create ground bounce in the sequencing logic.
Do not treat a 16-pin decade-counter package as automatically interchangeable. Confirm the clock edge, reset polarity and pulse requirements, decoded-output timing, supply range, output drive, and temperature grade in the manufacturer datasheet. The CD4017BE, MC14017BCPG, and MN4017B candidates are cross-reference leads rather than unconditional replacements. For inductive loads, add driver transistors and flyback protection; for long cables or slow clock edges, use a suitable signal-conditioning stage.
Informasi Konformitas
The verified search material identifies the CD4017BCN as a CMOS logic counter but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable to this general-purpose logic counter based on the available information.