MC14521BF - 24-Stage Binary Frequency Divider | onsemi
MPN: MC14521BF ✗ Akhir HidupMC14521BF Ringkasan
A binary frequency divider is a sequential logic device that reduces an input clock frequency by a fixed integer factor. The MC14521B belongs to the counter and multivibrator family of CMOS logic ICs, placing it within the broader semiconductor hierarchy of sequential logic, counters, frequency dividers, and clock-management circuits. Unlike a programmable divider or phase-locked loop, it implements a fixed divide-by-2^24 ratio at its output while retaining a simple external clocking architecture.
The principal feature of the MC14521BF is its 24-stage flip-flop chain. Each successive stage operates at one-half the frequency of the preceding stage, enabling a clock input to be divided into a substantially lower-frequency output. The manufacturer describes three input configurations: a crystal oscillator, an RC oscillator, or an input buffer for an externally supplied oscillator. These configurations give designers flexibility when creating stable timing references or dividing an existing system clock.
The internal counting architecture advances on each active clock transition. The 24-bit count range reaches 16,777,216, which makes the device useful for long timing intervals, fixed-ratio clock generation, event counting, and low-frequency timing references. Its fixed binary ratio differs from general-purpose programmable counters and makes system timing easier to analyze when a known divide factor is required.
Typical uses include timer and delay networks, pulse-rate reduction, instrumentation clocks, sequential test systems, low-frequency waveform generation, and digital timing references. In an RC or crystal-oscillator implementation, the device can establish its own timing source; with the buffered external-oscillator mode, it can instead divide a clock already present elsewhere in the system.
Designers should select the appropriate oscillator components and confirm the device’s electrical limits, supply requirements, and timing characteristics against the manufacturer datasheet before implementation. PCB layout should keep oscillator and timing paths compact, maintain a defined ground reference, and separate sensitive timing nodes from noisy switching circuits. The 16-pin PDIP package is suitable for through-hole assembly and prototype or legacy industrial equipment where a large package is acceptable.
This page combines the manufacturer function description, package and pin-count information, architecture details, application guidance, and a transparent assessment of drop-in replacement options. It also distinguishes the uniquely ordered MC14521BF ordering code from generic family references and focuses design decisions on the fixed 24-stage division behavior.
Alternatif penggantian untuk MC14521BF — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MC14521BF (sama faktor bentuk dan footprint) — berbeda di dalam Logic Family, Package.
MC14521BE
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MC14521BD
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →MC14521BM
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MC14521BFL
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MC14521BAL
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MC14521BF Rating Maksimal & Karakteristik Listrik
| Product Type | 24-stage frequency divider and counter IC |
| Number of Flip-Flops | 24 stages |
| Total Division Ratio | 2^24 (16,777,216:1) |
| Division Per Stage | 2:1 |
| Counter States | 16,777,216 states |
| Operating Modes | 3 modes |
| Crystal Oscillator Mode | Supported |
| RC Oscillator Mode | Supported |
| External Oscillator Buffer Mode | Supported |
| Logic Family | MC14521B CMOS counter and frequency-divider family |
| Paket | 16-pin PDIP |
| Jumlah Pin | 16 pins |
| Terminal Type | 16 through-hole terminals |
| Gaya Mounting | Through-hole PDIP |
| Output Function | Divided clock output |
| Clock Input Function | External oscillator input buffer |
| Count Advance | On each active clock transition |
MC14521BF 16-pin pdip Diamant Konfigurasi Panduan
Konfigurasi pin untuk MC14521BF (16-pin pdip pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk MC14521BF.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MC14521BF cocok untuk 6 aplikasis: Long-Duration Timer Reference, External Clock Frequency Reduction, RC-Oscillator Timing Network, Crystal-Based Low-Frequency Reference, Pulse and Event Rate Reduction, Instrumentation and Test-System Clocking.
Long-Duration Timer Reference
The MC14521BF is useful when a system requires a slow timing reference derived from a much faster clock. Its 24 flip-flops divide the source by 2^24, producing a fixed 16,777,216:1 relationship that can extend a short oscillator period into a long counting interval. Place the device in a protected low-noise clock section, route the reference away from switching nodes, and account for propagation delay accumulated through the 24-stage chain when sequencing multiple events.
Direkomendasikan
External Clock Frequency Reduction
The buffered external-oscillator mode allows MC14521BF to divide a master clock already distributed by another timing circuit. Because every one of its 24 stages divides by two, the device produces an extremely low-frequency derived clock from a stable high-frequency source. This arrangement is useful in instrumentation and control systems that need repeatable pulse pacing. Confirm input amplitude and frequency against the manufacturer limits, and keep the clock path short to minimize added jitter and noise susceptibility.
Direkomendasikan
RC-Oscillator Timing Network
MC14521BF can establish a self-contained timing reference by operating as an RC oscillator, avoiding a separate master clock and the associated distribution network. Its 24-stage binary division then reduces that reference to a slow output suitable for supervisory timing or repetitive event generation. Select the RC network using the oscillator guidance in the onsemi MC14521B manufacturer datasheet, because component tolerance, temperature behavior, and loading influence the effective time base.
Direkomendasikan
Crystal-Based Low-Frequency Reference
The crystal-oscillator mode lets MC14521BF operate from a crystal-based timing reference when a stable low-frequency output is required without relying on an external oscillator buffer. The 24 flip-flops divide the established frequency by 2^24, creating a very slow clock or event cadence. Preserve a clean ground reference, place the oscillator network close to the device, and follow the manufacturer’s grounding and layout recommendations to reduce pickup and startup sensitivity.
Direkomendasikan
Pulse and Event Rate Reduction
When an input pulse stream is too fast for useful downstream counting, MC14521BF reduces its effective rate by the fixed 2^24 factor. The resulting slow cadence can pace indicator updates, supervisory actions, or test-system events while preserving the original clock’s frequency relationship. Treat the divider as a fixed-ratio functional block rather than a programmable prescaler, and verify the cumulative propagation delay and output behavior against the system timing budget.
Direkomendasikan
Instrumentation and Test-System Clocking
MC14521BF can derive a predictable slow timing reference for instrumentation, automated test equipment, and legacy industrial controllers. The internal 24-stage chain provides a large fixed division without requiring a bank of external counters. In such systems, isolate the oscillator and output paths from relays, power stages, and high-current switching equipment. A separate general-purpose timer can provide programmable or shorter intervals where the fixed 16,777,216:1 division is not appropriate.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MC14521BF — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Catatan Desain
Keep the oscillator components, timing pins, and divided output routing compact and away from high-current switching paths. A crystal or RC network is sensitive to parasitic capacitance, ground bounce, and radiated noise, while the external-oscillator mode can pick up jitter from a poorly controlled clock source. Use a continuous ground plane, short return paths, and a quiet placement area where the 16-pin PDIP package remains accessible for prototype rework.
Do not assume that the divided output preserves the input waveform shape. The device contains 24 sequential flip-flops, so propagation delay, transition behavior, and accumulated timing uncertainty across the chain determine the usable output waveform. Preserve clean edge transitions at the selected operating frequency, observe the manufacturer’s input and output timing limits, and leave suitable logic margin for any receiving circuit that must reliably detect each divided transition.
Avoid treating MC14521BF as a programmable counter or as a 24-bit programmable divider. Its division ratio is fixed at 2^24, or 16,777,216:1, and its ordering code identifies a specific 16-pin PDIP implementation. A substitute is only drop-in when its package, terminal numbering, power pins, oscillator connections, count sequence, and output behavior match; verify every function in the manufacturer pin table before approving a replacement.
Informasi Konformitas
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the retrieved manufacturer and distributor information. These statuses require confirmation from current onsemi documentation.