Harris Corporation

CD4020BK3 - 14-Bit CMOS Binary Counter | Harris | Logic

MPN: CD4020BK3 ✓ Aktif
3 V to 18 V Vdss 16-CFP Package 24 MHz Speed
MOQ: 1 |

CD4020BK3 Ringkasan

The Harris CD4020BK3 is a 14-stage ripple-carry CMOS binary counter and divider with one counting element, negative-edge clock operation, and a 16-CFP through-hole package. The family operates from 3 V to 18 V and supports clock frequencies up to 24 MHz, making it suitable for frequency division, timing, sequencing, and digital clock-generation circuits.

A binary counter is a sequential digital circuit that records successive binary values at its clock input. A ripple-carry counter uses cascaded flip-flop stages, with each stage driving the next; this creates a simple, economical implementation with multiple independently accessible count outputs. The CD4020 belongs to the CMOS CD4000 logic family, a hierarchy of low-power digital ICs built around metal-oxide-semiconductor field-effect transistors and widely used for counters, dividers, gates, latches, and timers.

The CD4020 provides 14 count stages, allowing division of an input clock by binary ratios from 2 through 16384. Its negative-edge-triggered clock input advances the count on the falling transition, while a high-level reset input clears the counter to its all-zero state. With a 3 V to 18 V supply range and operation to 24 MHz, the device bridges low-speed industrial timing and higher-speed digital frequency division requirements.

Operation is based on cascaded master-slave stages. When the clock changes from high to low, the first stage toggles and its carry output advances the following stage. The outputs therefore divide the input frequency by successive powers of two. Because propagation delay accumulates through the cascade, the useful operating frequency must remain within the device’s specified timing limits, and unused stages should not be relied upon as zero-delay logic outputs.

Typical applications include divide-by-N clock generation, pulse-rate reduction, programmable timing modules, digital time-base circuits, oscillator counters, sequential control, and industrial pulse-distribution systems. An oscillator supplies the source clock, the CD4020 divides it, and downstream logic selects or gates the divided outputs. The 16-CFP package also supports through-hole assembly and prototype or repair work where surface-mount packages are less convenient.

Designers should use the manufacturer’s pin-description table when assigning PCB tracks and should account for unused output states during startup and reset. Input signal levels must remain within the supply-dependent CMOS limits, and external rise-time control may be needed when driving long traces. Decoupling close to the supply pins reduces supply noise, while careful clock routing limits false transitions and unwanted count advancement.

This page combines the CD4020BK3 function, family-level operating parameters, pin-package guidance, sourcing information, and drop-in comparison with related CD4020 devices. It also identifies the important trade-offs among counter grades and package options so engineers can select a replacement without overlooking voltage, speed, temperature, or footprint constraints.

Alternatif penggantian untuk CD4020BK3 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian CD4020BK3 (sama faktor bentuk dan footprint) — berbeda di dalam Logic Family.

Texas Instruments
Logic Family: CMOS
Bandingkan dengan CD4020BK3 →

CD4020BE

✅ Drop-In
Texas Instruments
📦 16-CFP
Binary ripple-carry counter and divider · CMOS · 1 element · 14 stages · Negative edge · CP · Active-high master reset · 12 outputs

Kontak untuk harga

Lihat Datasheet →

CD4020BF3A

✅ Drop-In
📦 16-CFP
Same 14-stage counter function; ordering, temperature, and exact package qualification differ by up to 10% from the CD4020BK3 code

📋 Alternatif referensi (tidak dalam katalog)

CD4020BK3 Rating Maksimal & Karakteristik Listrik

Product Type 14-bit binary counter and divider
Logic Family CD4000 CMOS
Counter Architecture Ripple-carry
Number of Count Elements 1 element
Number of Count Stages 14 stages
Counting Edge Negative edge
Frekuensi Bawah Maximum 24 MHz
Supply Voltage Range 3 V to 18 V
Paket 16-CFP
Jumlah Pin 16 pins
Tipe Mounting Through-hole
Output Function Binary counter outputs and frequency division
Reset Function Asynchronous reset to logic zero
Maximum Division Ratio 16384:1
Technology CMOS

CD4020BK3 16-cfp Diamant Konfigurasi Panduan

Konfigurasi pin untuk CD4020BK3 (16-cfp pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 16-cfp untuk CD4020BK3

Tidak ada data diatribut pin yang tersedia untuk CD4020BK3.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

CD4020BK3 cocok untuk 6 aplikasis: Programmable Clock Divider, Industrial Pulse Rate Reduction, Digital Timer and Time Base, Oscillator Frequency Divider, Sequential Control Logic, Retrofit and Through-Hole Prototyping.

⚡

Programmable Clock Divider

The CD4020BK3 suits clock-divider and time-base designs because its 14 cascaded stages divide an incoming clock by binary ratios from 2 through 16384. Place the oscillator close enough to preserve clock-edge quality, connect the selected Q output to the downstream timing circuit, and assert reset during initialization. The 24 MHz family maximum provides useful margin when the operating supply and trace conditions support it, while 3 V to 18 V operation allows the same divider approach to span several CMOS logic voltages.

🏭

Industrial Pulse Rate Reduction

When a sensor or machine produces more pulses than the receiving controller can process, the CD4020BK3 can reduce that pulse rate through a selected binary stage. Its negative-edge counting behavior makes it useful with common pulse sources, while the 3 V to 18 V supply range supports integration into industrial control logic. The key design consideration is preserving a clean clock edge in noisy environments and verifying that the chosen Q output provides the required reduction without losing pulse events.

🖥️

Digital Timer and Time Base

The CD4020BK3 can divide a stable oscillator into slower timing intervals for elapsed-time measurement, delayed events, or repetitive sequencing. Its 14 stages allow a wide range of binary time increments, and the high-impedance reset function clears all stages to zero for repeatable timing periods. For accurate timekeeping, use a low-jitter oscillator and route the clock away from motor, relay, and power-converter switching nodes so edge disturbances do not create false counts.

🌐

Oscillator Frequency Divider

The CD4020BK3 divides an oscillator output into lower-frequency signals while preserving a straightforward CMOS logic implementation. A Q1 output provides divide-by-two behavior, while later outputs provide progressively lower frequencies. The family operates up to 24 MHz and accepts a 3 V to 18 V supply, giving designers flexibility in test and measurement or embedded clock-generation systems. Keep the oscillator output buffered and observe the specified clock transition limits at the selected supply voltage.

🤖

Sequential Control Logic

In a sequential control system, the CD4020BK3 can count command or process pulses and expose multiple progress states through its stage outputs. This allows simple control logic to detect when a binary count has reached a particular threshold without a programmable microcontroller. Because ripple propagation accumulates through the stages, design timing around the relevant counter output rather than assuming every output changes at the same instant. The 16-CFP package is also convenient for through-hole industrial control boards.

🔧

Retrofit and Through-Hole Prototyping

The 16-CFP CD4020BK3 is practical for repair, educational, and legacy-system boards that use through-hole logic packages. Its 14-stage counter provides a simple way to divide pulses without programmable logic or a complex digital IC. During layout, follow the manufacturer pin-description table rather than assuming a generic DIP pinout, and maintain adequate clearance around adjacent through-hole leads. This package choice also simplifies socket-based experimentation and component substitution during maintenance.

Ringkasan Produk Direkomendasikan

CD4020BE Texas Instruments Digunakan di dalam: Programmable Clock Divider, Industrial Pulse Rate Reduction, Digital Timer and Time Base, Oscillator Frequency Divider, Sequential Control Logic, Retrofit and Through-Hole Prototyping CD4020BF3A Same-family 14-stage binary counter candidate Digunakan di dalam: Programmable Clock Divider, Industrial Pulse Rate Reduction, Digital Timer and Time Base, Oscillator Frequency Divider, Sequential Control Logic, Retrofit and Through-Hole Prototyping
What is the Harris CD4020BK3?
The Harris CD4020BK3 is a 14-stage, ripple-carry CMOS binary counter and divider packaged in a 16-CFP through-hole configuration. According to the manufacturer datasheet listing, it provides one counter element, advances on the negative clock edge, and operates across a 3 V to 18 V supply range. Its multiple binary outputs support division ratios from 2:1 through 16384:1.
What is the maximum clock frequency of the CD4020BK3?
The CD4020BK3 supports a maximum clock frequency of 24 MHz. The CD4020B family documentation identifies the counter as a CMOS ripple-carry binary counter and divider rated for operation from 3 V to 18 V. Actual usable frequency depends on supply voltage, clock rise time, trace length, temperature, and the loading applied to the counter outputs.
How many stages and count outputs does the CD4020BK3 contain?
The CD4020BK3 contains 14 ripple-count stages, with binary outputs corresponding to successive powers-of-two divisions of the clock. The counter advances on each negative clock transition. According to the manufacturer family description, the stages are implemented as cascaded flip-flops, allowing the input frequency to be divided by binary ratios as large as 16384:1.
What supply voltage does the CD4020BK3 require?
The CD4020BK3 operates from 3 V to 18 V. This range allows the same counter design to be used in 3.3 V, 5 V, and higher-voltage CMOS systems. Designers must not exceed the family’s specified maximum supply voltage and should observe the input and output voltage limits associated with the selected operating voltage.
Where can I download the CD4020BK3 datasheet PDF?
The CD4020BK3 datasheet can be accessed through the linked datasheet page at https://octopart.com/datasheet/harris/CD4020BK3. It documents the CD4020B-family counter, divider, electrical characteristics, timing behavior, and pin assignments. Use the pin-description table and package drawing from the manufacturer document when creating a PCB footprint or checking the 16-CFP connection sequence.
Where can I find the CD4020BK3 pinout?
The CD4020BK3 pinout is located in the pin-description table of the manufacturer CD4020B datasheet. The device uses a 16-CFP package with clock, reset, supply, ground, and 14 stage-output connections. Use the numbered package drawing when assigning through-hole PCB holes because physical pin numbering on a counter package cannot be inferred from its functional output order.
Is the CD4020BK3 suitable for frequency division?
Yes, the CD4020BK3 is specifically suited to frequency division and timing applications. Its 14 cascaded stages provide binary divide ratios from 2 through 16384, while its negative-edge clock input works with common oscillator and pulse sources. For dependable division, keep the clock transition time controlled and use the frequency and timing limits for the actual supply voltage.
Can CD4020BE replace the CD4020BK3?
CD4020BE is a functionally related CD4020B binary counter in a 16-pin package, but it should not be called a drop-in replacement without a package and qualification review. The CD4020BE suffix denotes a different ordering and qualification variant, while CD4020BK3 is identified as a 16-CFP Harris device. Confirm package dimensions, pin arrangement, temperature grade, and operating limits before substitution.
Can CD4020BF3A replace the CD4020BK3?
CD4020BF3A is functionally similar but is not a footprint-compatible drop-in choice for the 16-CFP CD4020BK3 because it uses a surface-mount configuration. The manufacturer family offers multiple CD4020B package and grade options, so functional similarity does not guarantee PCB compatibility. A board redesign is required when moving between through-hole and surface-mount packages.
When should I choose the CD4020BK3 instead of another CD4020 variant?
Choose the CD4020BK3 when a design needs a 14-stage CMOS counter in the 16-CFP through-hole package, operation from 3 V to 18 V, and a maximum clock frequency of 24 MHz. Select another suffix only after comparing temperature grade, package geometry, qualification, marking, and lifecycle requirements. Through-hole assembly and 16-CFP availability are the main reasons to retain this ordering code.
Is the CD4020BK3 suitable for industrial pulse counting?
The CD4020BK3 is suitable for industrial pulse counting when the clock signal meets CMOS transition-time and voltage limits. Its 3 V to 18 V supply range supports multiple logic voltages, and the 14-stage divider can reduce a pulse train for later measurement or control. Industrial qualification details must be checked for the exact Harris ordering code before using it in safety-critical equipment.
How do I design the clock input for the CD4020BK3?
Drive the CD4020BK3 clock with a clean signal that crosses the input threshold cleanly and meets the family’s specified rise and fall times. The counter advances on the negative transition, so a slow or noisy edge can cause metastability or extra counts. Keep the clock trace short, isolate it from switching-node routing, and avoid excessive capacitive loading when the source may have weak drive strength.
What happens when the CD4020BK3 reset input is asserted?
Asserting the CD4020BK3 reset input at a high level clears the counter to its all-zero state. According to the CD4020B family description, reset clears the internal stages so the output sequence begins again from zero. Designers should ensure that reset release cannot coincide with a clock transition if a repeatable first count is required.
Where can I buy CD4020BK3 and check its lead time?
Use the Request a Quote form on this page to ask about CD4020BK3 availability, lot traceability, packaging, current lead time, and minimum order quantity. One distributor listing recorded 35,480 pieces in stock on July 8, 2026, but inventory can change rapidly. The request form is the appropriate channel for a current quotation and delivery commitment.
What is the price of the CD4020BK3?
Current CD4020BK3 pricing should be requested through the Request a Quote form on this page. The page separates pricing from technical selection so a buyer can specify the required quantity, package quantity, traceability, and shipment destination. A written quotation also provides the appropriate freshness reference for production procurement rather than relying on a potentially stale catalog figure.
Is the CD4020BK3 in stock?
The CD4020BK3 was listed with substantial inventory by one distributor on July 8, 2026, but that snapshot does not guarantee present availability. Use the Request a Quote form on this page to confirm current stock, manufacturer traceability, permitted order quantities, and estimated dispatch. For scheduled production, request a lead time that covers inspection and incoming assembly time.
What can replace the CD4020BK3?
CD4020BE is the closest same-family candidate identified for functional review, but it should be treated as a conditional substitute rather than an automatic drop-in replacement. Verify that its 16-pin package dimensions, lead pitch, pin numbering, temperature range, electrical limits, and qualification status match the existing design. Surface-mount CD4020BF3A requires a footprint change and is not a board-level replacement.

Data referensi engineering untuk CD4020BK3 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the CD4020BK3 for a 14-stage binary-counter design that requires a 16-CFP through-hole package, a 3 V to 18 V supply, and operation up to 24 MHz. It is especially practical for legacy industrial boards, prototypes, repair sockets, and pulse-divider circuits where the Harris ordering code is already specified. CD4020BE is the leading same-family candidate when its exact temperature, qualification, marking, and lifecycle conditions are acceptable. CD4020BF3A offers the same functional counter family, but engineers should confirm its exact suffix and package construction before treating it as a board-level substitution. Neither candidate should be released solely from functional similarity. Review pin arrangement, lead geometry, electrical limits, environmental requirements, and trace reliability. For new designs, also evaluate a modern counter with additional operating or qualification information if long-term availability is more important than preserving the CD4000-series footprint.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini CD4020BE CD4020BF3A
Package 16-CFP 16-CFP 16-CFP
Brand Harris Corporation Texas Instruments Texas Instruments
Counter Function 14-stage ripple-carry binary counter and divider 14-stage ripple-carry binary counter and divider 14-stage ripple-carry binary counter and divider
Logic Family CD4000 CMOS CD4000 CMOS CD4000 CMOS
Supply Voltage Range 3 V to 18 V 3 V to 18 V 3 V to 18 V
Maximum Clock Frequency 24 MHz 24 MHz 24 MHz
Counting Edge Negative edge Negative edge Negative edge
Counting Elements 1 element 1 element 1 element
Maximum Division Ratio 16384:1 16384:1 16384:1

Diferensiator Kunci

  • Combines a 14-stage divider with a 24 MHz maximum clock frequency (vsCD4020BE)
  • Provides a 3 V to 18 V operating range for multi-voltage CMOS systems (vsCD4020BF3A)
  • Uses a 16-CFP through-hole package suited to legacy and serviceable assemblies (vsCD4020BE)

Catatan Desain

Route the clock as a short trace and provide a clean negative transition at the counter input. Slow clock edges increase the probability of metastability and incorrect counting. Keep switching-node wiring, high-current relay returns, and oscillator outputs physically separated when practical; add a local ground reference for any buffer or signal-conditioning stage driving the CD4020BK3.

Use the manufacturer pin-description table and package drawing to assign the 16-CFP footprint. Confirm lead pitch, row spacing, and pin-1 orientation rather than treating every DIP-16 counter as electrically identical. Place the reset trace away from high-current switching paths, and provide adequate clearance from adjacent components so the counter can be socketed where legacy serviceability is important.

Do not treat all Q outputs as changing simultaneously in a ripple counter. Propagation delay accumulates from one stage to the next, so downstream logic should use the stage whose timing is specified. Also avoid relying on an unconnected stage to remain permanently low; unused outputs should be left unconnected unless a defined reset or power-up state is required by the system.

Operate the CD4020BK3 only within its 3 V to 18 V supply range and use a local bypass capacitor near the package supply connection. The bypass path should be short and returned to the device ground without sharing a long current path with unrelated switching stages. Confirm the supply sequence and input limits if the same board can start with the counter supply absent while an external clock source remains powered.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No definitive environmental or material-compliance declarations were identified for the exact CD4020BK3 ordering code. The family is a CMOS logic IC and is not presented as an automotive-qualified device.

Pencarian Terkait

CD4020BK3 datasheet CD4020BK3 pinout CD4020BK3 datasheet pdf CD4020BK3 specifications CD4020BK3 price CD4020BK3 stock Harris CD4020BK3 CD4020BK3 equivalent CD4020BK3 replacement CD4020BK3 vs CD4020BE CD4020BK3 application circuit CD4020BK3 24MHz counter

Komponen dan Istilah Terkait

Harris Corporation CD4020BK3 CD4020BE CD4020BF3A CD4000 CMOS logic family CD4020B binary counter ripple-carry counter frequency divider CMOS negative-edge-triggered clock asynchronous reset 14-stage counter 24 MHz clock frequency 3 V to 18 V supply 16-CFP package through-hole package DIP-16 power management sequencing industrial pulse counting digital time base Texas Instruments logic IC counter IC
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ