G

CD4026BF/3 - 4-Bit Decade Counter with 7-Segment Output | Harris

MPN: CD4026BF/3 ✓ Aktif
16-CDIP Package Positive edge Speed
MOQ: 1 |

CD4026BF/3 Ringkasan

The Harris CD4026BF/3 is a 4-bit positive-edge decade counter with decoded 7-segment display output, supplied in a 16-CDIP package. It combines a decade counting stage with decoder outputs intended to drive common-cathode seven-segment displays. The part is presented as a logic counter IC, and its 16-CDIP construction supports through-hole assembly in designs that cannot use a surface-mount package. The suffix /3 identifies the particular Harris ordering variant, while CD4026BF denotes the related base device listed in the same 16-pin family.

A decade counter is a sequential digital circuit that advances through ten states for each complete count cycle. The CD4026 family adds dedicated seven-segment decoding so a numerical state can be presented directly rather than requiring a separate binary-to-display decoder. In the power-management hierarchy of electronics, this device belongs to the CMOS logic family, within counters and dividers, and ultimately within integrated logic semiconductors. Its positive-edge behavior means the count advances in response to the designated clock transition.

The principal engineering feature of CD4026BF/3 is integration: decade counting and seven-segment output decoding are combined in one 16-CDIP device. This can reduce the number of separate logic packages in a counter display module, simplify wiring between the counter and display, and preserve compatibility with legacy CD4000-series designs. The package also provides generous physical spacing between leads compared with most surface-mount logic packages, which can assist manual assembly and inspection in low-volume or maintenance-oriented equipment.

The counter architecture supports decimal counting and frequency-division use, while its display outputs provide a direct interface to compatible seven-segment indicators. Designers should distinguish the decoded display outputs from ordinary binary outputs: the display outputs drive individual display segments rather than presenting a conventional parallel binary word. Any display interface must therefore use the segment polarity and drive arrangement defined by the connected indicator.

Typical uses include decade-counter test equipment, industrial panel indicators, laboratory timers, educational electronics, and embedded displays that require a simple numerical count without a programmable microcontroller. A microcontroller-based product may choose a dedicated counter when the display interface is fixed, the system requires autonomous counting, or reducing firmware and logic-package count is valuable. For new designs that need arbitrary counting formats, bidirectional operation, or extensive configuration, a programmable counter or microcontroller may offer greater flexibility.

The principal design consideration is package and logic compatibility. Because the device is offered in a 16-CDIP package, PCB land patterns and assembly processes must match the through-hole footprint. Verify clock, reset, inhibit, carry, segment-output, supply, and ground connections in the manufacturer datasheet before layout. Decoupling requirements, operating-voltage limits, output-drive capability, and timing values should also be taken from the device documentation rather than inferred from generic CD4000-series devices.

This product page organizes the CD4026BF/3’s counter function, package information, sourcing route, comparison data, and practical design guidance. It also distinguishes exact drop-in candidates from merely similar counter devices, helping engineers select a replacement without changing the physical PCB footprint or changing display-interface requirements.

Alternatif penggantian untuk CD4026BF/3 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian CD4026BF/3 (sama faktor bentuk dan footprint) — berbeda di dalam Mounting Type, Counter Architecture, Counter Width, Package, Product Type.

Texas Instruments
Mounting Type: Through-hole dual-in-line
Counter Architecture: 5-stage Johnson decade counter
Counter Width: 5 bit
Harris Corporation
Counter Architecture: 5-stage Johnson counter with decoded 7-segment output

CD4026BF

✅ Drop-In
Harris Corporation
📦 16-CDIP
Decade counter with 7-segment decoder · 1 element · 5 bit · Positive edge · 3 V to 18 V · 16 MHz · 5-stage Johnson counter with decoded 7-segment output · 16-CDIP

Kontak untuk harga

Lihat Datasheet →

CD4026BD

✅ Drop-In
📦 16-CDIP
Related Harris CD4026-family suffix variant with the same counter architecture and 16-pin DIP format, but suffix-specific temperature and ordering limits must be checked

📋 Alternatif referensi (tidak dalam katalog)

CD4026BE

✅ Drop-In
Texas Instruments
📦 16-CDIP
CMOS decade counter/divider with decoded 7-segment outputs · 5-stage Johnson decade counter · 7-segment display output · 3 V to 18 V · 16 MHz · DC to 6 MHz typical at Vpp = 10 V · 5 bit · Positive edge

Kontak untuk harga

Lihat Datasheet →

CD4026BF/3 Rating Maksimal & Karakteristik Listrik

Manufacturer Harris Corporation
Product Type Decade counter and frequency divider with 7-segment decoded output
Logic Family CD4000 CMOS series
Counting Element 1 decade counter element
Counter Width 4 bit
Clock Edge Positive edge
Paket 16-CDIP
Jumlah Pin 16 pins
Tipe Mounting Through-hole
Display Interface 7-segment decoded output

CD4026BF/3 16-cdip Diamant Konfigurasi Panduan

Konfigurasi pin untuk CD4026BF/3 (16-cdip pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 16-cdip untuk CD4026BF/3

Tidak ada data diatribut pin yang tersedia untuk CD4026BF/3.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

CD4026BF/3 cocok untuk 6 aplikasis: Industrial Panel Counters, Laboratory Frequency Dividers, Seven-Segment Display Modules, Educational Digital Logic Projects, Legacy Test Equipment, Batch and Event Counters.

🏭

Industrial Panel Counters

The CD4026BF/3 fits industrial panel-counter assemblies that display a decimal count without requiring a general-purpose controller. Its one decade-counting element, 4-bit positive-edge operation, and integrated 7-segment decoded output provide the core functions needed to turn successive clock pulses into a visible numerical state. The 16-CDIP through-hole package is especially practical for equipment designed around hand installation, field replacement, or large through-hole components. Designers should use a display whose segment polarity matches the decoded outputs and verify the counter’s output-drive capability against the indicator current. The design also needs appropriate supply decoupling and a clean clock source to prevent false increments. Because the counter is autonomous, it continues counting without microcontroller code, which can simplify fixed process-counting, batch-counting, and production-test fixtures.

⚡

Laboratory Frequency Dividers

CD4026BF/3 can form the counting and display section of a laboratory frequency-divider or event-counter instrument. According to the Harris device description, the part is intended as both a decade counter and frequency divider, while the positive-edge clock input provides a predictable response to the counted signal. The decoded seven-segment outputs allow the divided or accumulated state to be shown directly rather than through a separate decoder. A 16-CDIP package makes the device convenient for prototype instruments and educational laboratory equipment assembled with through-hole sockets. For dependable measurements, the input clock must meet the manufacturer’s timing and transition requirements, and the input network should suppress spurious transitions. The display should also be checked for segment drive current, polarity, and visibility requirements. Use the manufacturer timing diagram when calculating the usable input-frequency range for the specific supply voltage.

📺

Seven-Segment Display Modules

The CD4026BF/3 is well suited to compact, dedicated decimal display modules because it combines decade counting with seven-segment decoding in one device. Its 4-bit positive-edge counter advances through ten states, and the decoded outputs identify the active display segments for each state. This integration can reduce the logic-package count compared with a separate counter and display decoder, simplifying the wiring between the clock source and display. The 16-CDIP package supports conventional through-hole display boards and avoids the need to adapt the design to a fine-pitch surface-mount footprint. Engineers must select a display with the correct common-anode or common-cathode arrangement, confirm that the counter can source or sink the required segment current, and provide suitable current limiting or drive circuitry where required. Verify all pin assignments against the manufacturer datasheet before fabrication.

🧩

Educational Digital Logic Projects

CD4026BF/3 is useful in educational systems that demonstrate decade counting, frequency division, state progression, and seven-segment decoding. Because the counter performs its counting function autonomously, students can observe ten distinct output states from successive positive-edge clock pulses while the integrated decoder drives a visible numerical indication. The through-hole 16-CDIP format is convenient for solderless boards, breadboard-oriented trainers, and laboratory exercises where component accessibility matters. The circuit can also be paired with a manual or oscillator-derived clock to teach debouncing, input conditioning, and reset behavior. Because incorrect floating inputs can produce apparent counting errors, each active control input should be tied to a defined logic level when unused. The instructor or designer should follow the manufacturer pin table for supply, ground, clock, reset, inhibit, carry, and segment connections. This prevents students from assuming that all CD4026-family variants share identical suffix behavior.

🔧

Legacy Test Equipment

CD4026BF/3 is a practical consideration when maintaining or reproducing legacy test equipment built around CD4000-series decade counters. The through-hole 16-CDIP package matches the style of components commonly used in older instrument and control assemblies, while the decoded seven-segment outputs can preserve a direct numerical-display architecture. The positive-edge counter provides a straightforward interface for repetitive stimulus signals in equipment that counts cycles, events, or divided intervals. Before installation, engineers should compare the full pin description, supply-voltage range, propagation timing, and output-drive data with the original device. Legacy equipment may also have long traces susceptible to clock noise, so a clean reset network and close supply bypassing are important. The Harris /3 suffix should not be substituted solely on the basis of the CD4026BF family name; confirm the ordering grade and manufacturer documentation first.

🏭

Batch and Event Counters

CD4026BF/3 can implement the visible counting element of a small batch counter or event-totalizer. Each accepted positive-edge clock pulse advances the decade state, and the decoded display outputs present the count without a separate parallel binary readout and decoder. This architecture is useful for simple production fixtures, parts feeders, test adapters, and manually operated equipment where the counter must retain a straightforward numerical state. The 16-CDIP package is advantageous for prototypes and serviceable equipment, because it is easy to socket and replace. The system designer must determine whether the event source already provides clean logic levels; long cables, mechanical contacts, or noisy sensors otherwise require debouncing and shaping circuitry. Reset behavior should be tested across all operating modes. Display brightness and segment current should also be evaluated with the actual indicator rather than inferred only from the counter’s counter-width specification.

What is the CD4026BF/3?
The CD4026BF/3 is a 4-bit positive-edge decade counter with a decoded 7-segment display output in a 16-CDIP package. According to the Harris device listing, it contains one decade-counting element and is intended for counter and frequency-divider applications. The integrated decoder makes it suitable for driving a compatible seven-segment display without a separate display-decoder IC.
Where can I download the CD4026BF/3 datasheet PDF?
The CD4026BF/3 datasheet and technical information can be reached through the manufacturer-linked CD4026BF datasheet page at Datasheets.com. According to the Harris product documentation, the device is a decade counter and frequency divider with a 7-segment decoded output in a 16-CDIP package. Use the pin-description and electrical-characteristics tables in that document before finalizing a PCB layout.
What is the pinout of the CD4026BF/3?
The CD4026BF/3 uses a 16-CDIP footprint with 16 numbered positions, but a complete manufacturer-confirmed pin-name list is not published in the accessible product text. According to the Harris device description, the package contains the decade-counter clock, control, decoded display, supply, and ground connections. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks rather than relying on another CD4000-series counter.
Is CD4026BF/3 a binary counter or a decade counter?
The CD4026BF/3 is a decade counter, not a conventional binary-only counter. According to the Harris listing, it is a counter IC with one decade element, 4-bit width, and a positive clock edge. The count proceeds through ten decimal states and the decoded outputs directly control the individual segments of a compatible seven-segment display.
CD4026BF/3 vs CD4026BF: what is the difference?
CD4026BF/3 is the slash-suffix ordering variant of the Harris CD4026BF family, and both listings identify a 16-CDIP decade-counter device with seven-segment decoding. According to the manufacturer-related listings, the CD4026BF entry is described as a 5-bit counter while the CD4026BF/3 entry is described as 4-bit. Confirm the exact suffix and its ordering temperature grade before treating one as a drop-in replacement.
Can CD4026BE replace CD4026BF/3?
CD4026BE may be considered for evaluation as a 16-pin CD4026-family alternative, but it should not be treated as an automatic drop-in replacement. The published comparison states that CD4026BE has consistent terminals and package characteristics, while the Harris CD4026BF/3 listing identifies a 16-CDIP package and a 4-bit positive-edge counter. Verify the full Harris pin description, supply range, timing, and temperature grade before substitution.
What can replace the CD4026BF/3?
The closest documented replacement candidate is CD4026BE because its published comparison describes matching package and terminal characteristics. For the CD4026BF/3 itself, however, an exact replacement should preserve the 16-CDIP footprint, decade-counter function, positive-edge clocking, decoded seven-segment outputs, and electrical limits. CD4026BF and CD4026BD are also related Harris family entries, but each requires suffix-level verification.
Is CD4026BF/3 suitable for a seven-segment display?
Yes, CD4026BF/3 is specifically described as a decade counter with a 7-segment decoded output, making it suitable for direct connection to a compatible seven-segment indicator. According to the Harris device description, the 4-bit positive-edge counter advances in decimal states and activates the appropriate decoded segment outputs. The indicator polarity and current requirements must match the counter’s output-drive specifications.
What is the lead time for CD4026BF/3?
Request the current CD4026BF/3 lead time and minimum order quantity through the Request a Quote form on this page. The manufacturer-related product listing shows a purchasable ordering channel, but it does not provide a fixed production lead-time interval. Confirming the quantity, package, and any required qualification details with the supplier is necessary before committing to a build schedule.
Is CD4026BF/3 in stock?
Stock status changes and should be confirmed through the Request a Quote form on this page. The accessible product information identifies CD4026BF/3 as an orderable Harris component, while a separate reseller snippet also references inventory updated in January 2025. Neither statement guarantees present stock, so use the quote form for the current quantity and delivery schedule.
Where can I buy CD4026BF/3 online?
Use the Request a Quote form on this page to request CD4026BF/3 availability, pricing, and lead time. According to the manufacturer-related product listing, the exact part is categorized as a Harris decade counter and frequency divider with a 7-segment decoded output. Providing the required quantity and target delivery date enables a current sourcing response without relying on a stale listing.
What is the price of CD4026BF/3?
The current CD4026BF/3 price should be requested through the Request a Quote form on this page because pricing and availability can change with quantity and supply conditions. The manufacturer-related listing identifies the exact Harris CD4026BF/3 part and its 7-segment counter function. The quote request should state the required quantity, package preference, and target shipment date.
When should I choose CD4026BF/3 instead of a microcontroller?
Choose CD4026BF/3 when the design only needs autonomous decade counting and a direct seven-segment display interface. According to the Harris device description, the device combines a 4-bit positive-edge decade counter with decoded display outputs in a 16-CDIP package. A microcontroller is more appropriate when programmable counting, multiple display formats, communications, or complex sequencing are required.
When should I choose CD4026BF/3 over CD4026BE?
Choose CD4026BF/3 when the design specifically requires the Harris /3 ordering variant and has been qualified around its documented 4-bit, 16-CDIP implementation. CD4026BE is a useful 16-pin family comparison candidate when exact continuity with the original Harris part is not required. According to the published comparison, its terminals and package characteristics are consistent, but electrical and grade differences still require review.
What are the key specifications of CD4026BF/3 that engineers should know?
The key documented specifications are a 4-bit counter width, one decade-counting element, positive-edge operation, 7-segment decoded output, and a 16-CDIP through-hole package. According to the Harris-related listing, CD4026BF/3 is a counter and frequency-divider IC designed for decade counting. Supply voltage, timing, output-current, and temperature details must be confirmed in the manufacturer datasheet before release.

Data referensi engineering untuk CD4026BF/3 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose CD4026BF/3 when the PCB requires a 16-CDIP decade counter with decoded seven-segment outputs and the design values the exact Harris /3 ordering variant. Its autonomous counting behavior is useful for fixed panel indicators, laboratory dividers, educational counters, and simple batch-counting fixtures. CD4026BF is a closely related Harris family variant, but its listing describes a different counter-width value, so verify the suffix before using it as a direct substitute. CD4026BD is another related Harris family entry and may be useful when its specific ordering grade matches the application. CD4026BE offers a Texas Instruments family alternative with a published package-and-terminal match, but supply range, timing, temperature grade, and display-drive details must still be checked. Choose a programmable controller instead when the product needs bidirectional counting, non-decimal formats, programmable display layouts, communications, or advanced sequencing.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini CD4026BF CD4026BD CD4026BE
Brand L3Harris Technologies, Inc. L3Harris Technologies, Inc. L3Harris Technologies, Inc. Texas Instruments
Package 16-CDIP 16-CDIP 16-CDIP 16-CDIP
Counter Type Decade counter and frequency divider Decade counter and frequency divider CD4026-family counter Decade counter
Display Output 7-segment decoded output 7-segment decoded output 7-segment decoded output 7-segment decoded output
Logic Family CD4000 CMOS series CD4000 CMOS series CD4000 CMOS series CD4000 CMOS series
Mounting Type Through-hole Through-hole Through-hole Through-hole

Diferensiator Kunci

  • Combines decade counting and seven-segment decoding (vsCD4026BE)
  • Maintains the same 16-CDIP physical format as the related Harris family (vsCD4026BF)
  • Targets autonomous counting without microcontroller firmware (vsCD4026BD)

Catatan Desain

Use a PCB footprint intended for a 16-CDIP rather than a generic 16-pin surface-mount footprint. Confirm row spacing, lead pitch, hole diameter, and pin-1 orientation against the physical Harris device before artwork release. The accessible product information identifies a 16-CDIP package, but it does not provide a manufacturer land-pattern drawing; obtain the package drawing from the manufacturer documentation and verify it against any existing board rather than inferring dimensions from the lead count.

Place the supply bypass capacitor close to the device power and ground pins and return its ground through the shortest practical path. The accessible product information identifies operation across several common logic supplies for the related CD4026BF listing, but exact CD4026BF/3 limits and decoupling recommendations require confirmation in the manufacturer datasheet. Keep the clock and control traces away from noisy switching nodes, and ensure unused control inputs are connected to defined logic levels rather than left floating.

Route clock, reset, and inhibit signals away from display segment outputs and other high-current switching paths. A display can introduce abrupt current transitions, so segment-drive traces should not share sensitive clock geometry or create large loop areas. Verify the clock’s maximum operating frequency at the intended supply voltage because counter timing in CMOS logic is supply-dependent. If the clock originates from a mechanical switch or long cable, add suitable debouncing and Schmitt-trigger conditioning rather than relying on the counter to suppress false edges.

Do not assume that every CD4026-family suffix has identical ordering-grade or temperature behavior. CD4026BF/3, CD4026BF, CD4026BD, and CD4026BE appear in related listings, but suffix and manufacturer differences can affect qualification and electrical limits. Before substituting a part, compare the complete pin-description table, supply range, timing, output-drive data, and temperature grade. Also verify whether the chosen indicator uses common-anode or common-cathode segments so that the decoded output polarity is compatible.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The accessible manufacturer-related product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals compliance. AEC-Q100 is not applicable because this is a general-purpose logic counter rather than an automotive-qualified device designation.

Pencarian Terkait

CD4026BF/3 datasheet CD4026BF/3 datasheet pdf CD4026BF/3 pinout CD4026BF/3 specifications CD4026BF/3 equivalent CD4026BF/3 replacement CD4026BF/3 drop-in substitute CD4026BF/3 price CD4026BF/3 stock CD4026BF/3 lead time CD4026BF/3 16-CDIP CD4026BF/3 seven segment counter CD4026BF/3 vs CD4026BE Harris CD4026BF/3

Komponen dan Istilah Terkait

L3Harris Technologies, Inc. Harris Corporation CD4026BF/3 CD4026BF CD4026BD CD4026BE Texas Instruments decade counter frequency divider 7-segment decoded output CMOS logic CD4000 series counter IC integrated circuit 16-CDIP through-hole package positive-edge clocking seven-segment display clock conditioning supply bypassing logic counter semiconductor
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ