CD4026BF/3 - 4-Bit Decade Counter with 7-Segment Output | Harris
MPN: CD4026BF/3 ✓ 啟用中CD4026BF/3 概覽
A decade counter is a sequential digital circuit that advances through ten states for each complete count cycle. The CD4026 family adds dedicated seven-segment decoding so a numerical state can be presented directly rather than requiring a separate binary-to-display decoder. In the power-management hierarchy of electronics, this device belongs to the CMOS logic family, within counters and dividers, and ultimately within integrated logic semiconductors. Its positive-edge behavior means the count advances in response to the designated clock transition.
The principal engineering feature of CD4026BF/3 is integration: decade counting and seven-segment output decoding are combined in one 16-CDIP device. This can reduce the number of separate logic packages in a counter display module, simplify wiring between the counter and display, and preserve compatibility with legacy CD4000-series designs. The package also provides generous physical spacing between leads compared with most surface-mount logic packages, which can assist manual assembly and inspection in low-volume or maintenance-oriented equipment.
The counter architecture supports decimal counting and frequency-division use, while its display outputs provide a direct interface to compatible seven-segment indicators. Designers should distinguish the decoded display outputs from ordinary binary outputs: the display outputs drive individual display segments rather than presenting a conventional parallel binary word. Any display interface must therefore use the segment polarity and drive arrangement defined by the connected indicator.
Typical uses include decade-counter test equipment, industrial panel indicators, laboratory timers, educational electronics, and embedded displays that require a simple numerical count without a programmable microcontroller. A microcontroller-based product may choose a dedicated counter when the display interface is fixed, the system requires autonomous counting, or reducing firmware and logic-package count is valuable. For new designs that need arbitrary counting formats, bidirectional operation, or extensive configuration, a programmable counter or microcontroller may offer greater flexibility.
The principal design consideration is package and logic compatibility. Because the device is offered in a 16-CDIP package, PCB land patterns and assembly processes must match the through-hole footprint. Verify clock, reset, inhibit, carry, segment-output, supply, and ground connections in the manufacturer datasheet before layout. Decoupling requirements, operating-voltage limits, output-drive capability, and timing values should also be taken from the device documentation rather than inferred from generic CD4000-series devices.
This product page organizes the CD4026BF/3’s counter function, package information, sourcing route, comparison data, and practical design guidance. It also distinguishes exact drop-in candidates from merely similar counter devices, helping engineers select a replacement without changing the physical PCB footprint or changing display-interface requirements.
直接替換替代品,適用於 CD4026BF/3 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: CD4026BF/3 (相同外形與佔位) — 差異在於 Mounting Type, Counter Architecture, Counter Width, Package, Product Type.
CD4026BF
✅ 直接替換聯絡詢價
查看資料表 →CD4026BD
✅ 直接替換📋 參考替代品(不在目錄中)
CD4026BF/3 最大額定值與電氣特性
| Manufacturer | Harris Corporation |
| Product Type | Decade counter and frequency divider with 7-segment decoded output |
| Logic Family | CD4000 CMOS series |
| Counting Element | 1 decade counter element |
| Counter Width | 4 bit |
| Clock Edge | Positive edge |
| 封裝 | 16-CDIP |
| 腳位數 | 16 pins |
| 安裝類型 | Through-hole |
| Display Interface | 7-segment decoded output |
CD4026BF/3 16-cdip 腳位配置指南
CD4026BF/3(16-cdip 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CD4026BF/3.
請參閱 資料表 以查看完整腳位配置。
典型應用
CD4026BF/3 適用於 6 應用s: Industrial Panel Counters, Laboratory Frequency Dividers, Seven-Segment Display Modules, Educational Digital Logic Projects, Legacy Test Equipment, Batch and Event Counters.
Industrial Panel Counters
The CD4026BF/3 fits industrial panel-counter assemblies that display a decimal count without requiring a general-purpose controller. Its one decade-counting element, 4-bit positive-edge operation, and integrated 7-segment decoded output provide the core functions needed to turn successive clock pulses into a visible numerical state. The 16-CDIP through-hole package is especially practical for equipment designed around hand installation, field replacement, or large through-hole components. Designers should use a display whose segment polarity matches the decoded outputs and verify the counter’s output-drive capability against the indicator current. The design also needs appropriate supply decoupling and a clean clock source to prevent false increments. Because the counter is autonomous, it continues counting without microcontroller code, which can simplify fixed process-counting, batch-counting, and production-test fixtures.
推薦
Laboratory Frequency Dividers
CD4026BF/3 can form the counting and display section of a laboratory frequency-divider or event-counter instrument. According to the Harris device description, the part is intended as both a decade counter and frequency divider, while the positive-edge clock input provides a predictable response to the counted signal. The decoded seven-segment outputs allow the divided or accumulated state to be shown directly rather than through a separate decoder. A 16-CDIP package makes the device convenient for prototype instruments and educational laboratory equipment assembled with through-hole sockets. For dependable measurements, the input clock must meet the manufacturer’s timing and transition requirements, and the input network should suppress spurious transitions. The display should also be checked for segment drive current, polarity, and visibility requirements. Use the manufacturer timing diagram when calculating the usable input-frequency range for the specific supply voltage.
推薦
Seven-Segment Display Modules
The CD4026BF/3 is well suited to compact, dedicated decimal display modules because it combines decade counting with seven-segment decoding in one device. Its 4-bit positive-edge counter advances through ten states, and the decoded outputs identify the active display segments for each state. This integration can reduce the logic-package count compared with a separate counter and display decoder, simplifying the wiring between the clock source and display. The 16-CDIP package supports conventional through-hole display boards and avoids the need to adapt the design to a fine-pitch surface-mount footprint. Engineers must select a display with the correct common-anode or common-cathode arrangement, confirm that the counter can source or sink the required segment current, and provide suitable current limiting or drive circuitry where required. Verify all pin assignments against the manufacturer datasheet before fabrication.
推薦
Educational Digital Logic Projects
CD4026BF/3 is useful in educational systems that demonstrate decade counting, frequency division, state progression, and seven-segment decoding. Because the counter performs its counting function autonomously, students can observe ten distinct output states from successive positive-edge clock pulses while the integrated decoder drives a visible numerical indication. The through-hole 16-CDIP format is convenient for solderless boards, breadboard-oriented trainers, and laboratory exercises where component accessibility matters. The circuit can also be paired with a manual or oscillator-derived clock to teach debouncing, input conditioning, and reset behavior. Because incorrect floating inputs can produce apparent counting errors, each active control input should be tied to a defined logic level when unused. The instructor or designer should follow the manufacturer pin table for supply, ground, clock, reset, inhibit, carry, and segment connections. This prevents students from assuming that all CD4026-family variants share identical suffix behavior.
推薦
Legacy Test Equipment
CD4026BF/3 is a practical consideration when maintaining or reproducing legacy test equipment built around CD4000-series decade counters. The through-hole 16-CDIP package matches the style of components commonly used in older instrument and control assemblies, while the decoded seven-segment outputs can preserve a direct numerical-display architecture. The positive-edge counter provides a straightforward interface for repetitive stimulus signals in equipment that counts cycles, events, or divided intervals. Before installation, engineers should compare the full pin description, supply-voltage range, propagation timing, and output-drive data with the original device. Legacy equipment may also have long traces susceptible to clock noise, so a clean reset network and close supply bypassing are important. The Harris /3 suffix should not be substituted solely on the basis of the CD4026BF family name; confirm the ordering grade and manufacturer documentation first.
推薦
Batch and Event Counters
CD4026BF/3 can implement the visible counting element of a small batch counter or event-totalizer. Each accepted positive-edge clock pulse advances the decade state, and the decoded display outputs present the count without a separate parallel binary readout and decoder. This architecture is useful for simple production fixtures, parts feeders, test adapters, and manually operated equipment where the counter must retain a straightforward numerical state. The 16-CDIP package is advantageous for prototypes and serviceable equipment, because it is easy to socket and replace. The system designer must determine whether the event source already provides clean logic levels; long cables, mechanical contacts, or noisy sensors otherwise require debouncing and shaping circuitry. Reset behavior should be tested across all operating modes. Display brightness and segment current should also be evaluated with the actual indicator rather than inferred only from the counter’s counter-width specification.
推薦
推薦產品摘要
工程參考資料,適用於 CD4026BF/3 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CD4026BF | CD4026BD | CD4026BE |
|---|---|---|---|---|
| Brand | L3Harris Technologies, Inc. | L3Harris Technologies, Inc. | L3Harris Technologies, Inc. | Texas Instruments |
| Package | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP |
| Counter Type | Decade counter and frequency divider | Decade counter and frequency divider | CD4026-family counter | Decade counter |
| Display Output | 7-segment decoded output | 7-segment decoded output | 7-segment decoded output | 7-segment decoded output |
| Logic Family | CD4000 CMOS series | CD4000 CMOS series | CD4000 CMOS series | CD4000 CMOS series |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole |
主要差異化特點
- Combines decade counting and seven-segment decoding (對比CD4026BE)
- Maintains the same 16-CDIP physical format as the related Harris family (對比CD4026BF)
- Targets autonomous counting without microcontroller firmware (對比CD4026BD)
設計說明
Use a PCB footprint intended for a 16-CDIP rather than a generic 16-pin surface-mount footprint. Confirm row spacing, lead pitch, hole diameter, and pin-1 orientation against the physical Harris device before artwork release. The accessible product information identifies a 16-CDIP package, but it does not provide a manufacturer land-pattern drawing; obtain the package drawing from the manufacturer documentation and verify it against any existing board rather than inferring dimensions from the lead count.
Place the supply bypass capacitor close to the device power and ground pins and return its ground through the shortest practical path. The accessible product information identifies operation across several common logic supplies for the related CD4026BF listing, but exact CD4026BF/3 limits and decoupling recommendations require confirmation in the manufacturer datasheet. Keep the clock and control traces away from noisy switching nodes, and ensure unused control inputs are connected to defined logic levels rather than left floating.
Route clock, reset, and inhibit signals away from display segment outputs and other high-current switching paths. A display can introduce abrupt current transitions, so segment-drive traces should not share sensitive clock geometry or create large loop areas. Verify the clock’s maximum operating frequency at the intended supply voltage because counter timing in CMOS logic is supply-dependent. If the clock originates from a mechanical switch or long cable, add suitable debouncing and Schmitt-trigger conditioning rather than relying on the counter to suppress false edges.
Do not assume that every CD4026-family suffix has identical ordering-grade or temperature behavior. CD4026BF/3, CD4026BF, CD4026BD, and CD4026BE appear in related listings, but suffix and manufacturer differences can affect qualification and electrical limits. Before substituting a part, compare the complete pin-description table, supply range, timing, output-drive data, and temperature grade. Also verify whether the chosen indicator uses common-anode or common-cathode segments so that the decoded output polarity is compatible.
合規資訊
The accessible manufacturer-related product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals compliance. AEC-Q100 is not applicable because this is a general-purpose logic counter rather than an automotive-qualified device designation.