Texas Instruments

CD4520BEX - Dual 4-Bit Binary Counter | Texas Instruments

MPN: CD4520BEX ✓ Aktif
3 V to 18 V Vdss PDIP-16 Package
MOQ: 1 |

CD4520BEX Ringkasan

Texas Instruments CD4520BEX is a CMOS dual binary up-counter with two 4-bit counting sections, a 3 V to 18 V operating range, and a 16-lead PDIP package. The counter increments on each positive clock edge and is suitable for digital counting, frequency division, sequencing, and industrial control logic. Its binary counting format distinguishes it from BCD counter variants.

A binary counter is a sequential digital-logic component that stores a multi-bit count and advances that count on a triggering edge. The CD4520B belongs to the counter and divider hierarchy within CMOS logic ICs, combining two counting sections in one package. Binary counters are useful when a system needs modulo operation, event counting, timing division, state progression, or an encoded count for downstream logic.

The principal features of the CD4520BEX include dual-counter operation, 4-bit binary counting, positive-edge triggering, and operation from 3 V to 18 V. Each counting section provides a practical division or modulo function when cascaded or configured in a system. The 16-lead PDIP package supports through-hole assembly, prototyping, repair, and legacy industrial equipment where a surface-mount package would be unsuitable.

Internally, the CD4520B is identified as a CMOS synchronous, positive-edge-triggered binary counter. Positive-edge triggering means the count changes when the clock input transitions from a low level to a high level. Synchronous operation helps maintain controlled state changes at the active clock edge, which is important when the counter output feeds synchronous control or display circuitry. The CD4520B and CD4518B families are related but are not functionally identical because their count formats differ.

Typical implementations include digital event counters, programmable timing dividers, industrial sequence controllers, pulse-counting interfaces, stepper-motor position counters, and general-purpose binary state machines. The counter is particularly useful when a compact 4-bit count must be divided by a power of two or expanded through cascaded stages.

PCB design should provide a stable clock path, a defined reset path, and adequate bypassing near the power pins. Keep clock traces away from noisy switching nodes and use a pull-down resistor when the unused clock input could float. For new production designs, verify the complete logic-state, timing, and absolute-maximum-rating tables in the manufacturer datasheet before assigning inputs or selecting external components.

This page combines the manufacturer product information with practical counter-selection guidance, verified same-package alternatives, pin and timing considerations, and application-specific design notes. It also identifies where timing limits, electrical characteristics, and detailed pin descriptions must be taken directly from the CD4520B datasheet before final circuit release.

Alternatif penggantian untuk CD4520BEX — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian CD4520BEX (sama faktor bentuk dan footprint) — berbeda di dalam Counter Width, Mounting Type, Counter Type, Output Type, Package.

Harris Corporation
Counter Width: 4 bits
Mounting Type: Surface mount
Counter Type: Binary counter
Bandingkan dengan CD4520BEX →
Texas Instruments
Counter Width: 4 bits per counter
Counter Type: Internally synchronous binary counter
Output Type: Parallel binary outputs with carry
Bandingkan dengan CD4520BEX →

CD4520BE

✅ Drop-In
Texas Instruments
📦 PDIP-16
CMOS dual binary up-counter · 2 counters · 4 bits per counter · 4 stages per counter · Up-count · Positive-going or negative-going · Parallel binary outputs with carry · Internally synchronous binary counter

Kontak untuk harga

Lihat Datasheet →

CD4520BD

✅ Drop-In
Harris Corporation
📦 PDIP-16
Binary counter · 2 elements · 4 bits · Up · CMOS · 3 V to 18 V · 8 MHz · 80 ns

Kontak untuk harga

Lihat Datasheet →

CD4520BEX

✅ Drop-In
Texas Instruments
📦 PDIP-16
3 V to 18 V · CMOS · Dual counter · Up · Binary · 4 bit · 2 · Positive edge

Kontak untuk harga

Lihat Datasheet →

CD4520BEX

✅ Drop-In
Texas Instruments
📦 PDIP-16
3 V to 18 V · CMOS · Dual counter · Up · Binary · 4 bit · 2 · Positive edge

Kontak untuk harga

Lihat Datasheet →

CD4520BEX

✅ Drop-In
Texas Instruments
📦 PDIP-16
3 V to 18 V · CMOS · Dual counter · Up · Binary · 4 bit · 2 · Positive edge

Kontak untuk harga

Lihat Datasheet →

CD4520BEX Rating Maksimal & Karakteristik Listrik

Supply Voltage Range 3 V to 18 V
Logic Family CMOS
Counter Configuration Dual counter
Count Direction Up
Count Format Binary
Counter Width 4 bit
Number of Counting Elements 2
Triggering Edge Positive edge
Operation Mode Synchronous
Package Type PDIP-16
Lead Count 16
Tipe Mounting Through-hole

CD4520BEX pdip-16 Diamant Konfigurasi Panduan

Konfigurasi pin untuk CD4520BEX (pdip-16 pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai pdip-16 untuk CD4520BEX

Tidak ada data diatribut pin yang tersedia untuk CD4520BEX.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

CD4520BEX cocok untuk 6 aplikasis: Digital Event Counting, Frequency Division, Industrial Sequence Control, Programmable Timer, Stepper-Motor Position Counter, Pulse and Repetition Counter.

🔧

Digital Event Counting

The CD4520BEX is suitable for counting discrete events because each positive clock edge advances its 4-bit binary state. Use one counter section to accumulate pulses from a sensor, switch, or sensor-conditioning circuit and then read the binary result through four output lines. Its 3 V to 18 V operating range supports multiple logic environments, while the 16-lead PDIP package simplifies through-hole assembly. When the event source can be noisy, use a conditioned clock signal and maintain a defined state when the counter is not clocked.

⚡

Frequency Division

The CD4520BEX can divide an incoming pulse train by powers of two through its 4-bit binary count. A periodic clock at the counter input produces a lower-frequency carry state when the terminal count is reached, making the device useful for clock-rate reduction, periodic sampling, and slow sequencing. Because the counter is positive-edge triggered, the source must present clean transitions. The 3 V to 18 V supply range also allows timing sections to operate beside both lower-voltage and legacy CMOS circuits.

🏭

Industrial Sequence Control

The dual-counter architecture of the CD4520BEX can support industrial sequencing when one section tracks a process step and the other counts machine events. Its four binary outputs provide a compact state representation for logic gates, selectors, or programmable controllers. The PDIP-16 package is particularly useful for legacy machinery, test fixtures, and control boards that use through-hole assembly. Validate the counter's exact reset behavior and timing limits against the manufacturer datasheet before connecting it to safety-related or high-energy equipment.

⏱️

Programmable Timer

A CD4520BEX can divide a stable periodic clock and provide a carry pulse at the end of a 4-bit count interval, creating a useful timer base for elapsed-time measurement or periodic control. Cascading counter sections can extend the effective count range while preserving binary operation. Choose the counter section whose reset, clock, and carry connections match the intended state diagram in the manufacturer datasheet. Its 3 V to 18 V range provides flexibility, but timing margins must be checked at the actual supply voltage and load.

🔧

Stepper-Motor Position Counter

The CD4520BEX can count step-command pulses and maintain a four-bit position state for small stepper-motor control or laboratory positioning systems. Positive-edge triggering aligns each count with a commanded motor step, while the binary outputs simplify decoding into control logic. The dual-counter configuration can provide an auxiliary event or revolution count. Add mechanical noise filtering or a Schmitt-conditioned input where long motor wiring could introduce false clock transitions, and use the reset input only with a controlled reset network.

⚙️

Pulse and Repetition Counter

The CD4520BEX is appropriate for repetition-counting circuits in test equipment, dispensing systems, and repetitive machinery. Each accepted input pulse advances the 4-bit count, allowing a controller to compare the terminal state and stop or change the sequence after a prescribed number of events. Two sections allow related repetitions to be counted independently. Keep the clock path away from switching power nodes and use a defined reset state so power-up conditions do not create an unintended count sequence.

What is the CD4520BEX?
The CD4520BEX is a CMOS dual binary up-counter with two 4-bit counting sections operating from 3 V to 18 V in a 16-lead PDIP package. According to the Texas Instruments CD4520B product documentation, it is a synchronous, positive-edge-triggered counter whose count advances on the rising clock edge. It is intended for digital counting, frequency division, sequencing, and general-purpose control logic.
Where can I download the CD4520B datasheet PDF?
The official CD4520B documentation is available through the Texas Instruments product page at https://www.ti.com/product/CD4520B. The page links the manufacturer data sheet for the CD4520B and CD4518B types, including ordering information, electrical characteristics, timing information, and package details. Use the manufacturer copy for production design decisions because it identifies the CD4520B family and its available package options.
What is the CD4520BEX pinout?
The CD4520BEX uses a 16-lead PDIP outline, but its complete numbered pin-description table is not reproduced on this page. Texas Instruments documents the clock, output, carry, reset, and supply assignments in the CD4520B datasheet. Use that pin-description table when assigning PCB tracks because guessing individual pin functions can cause incorrect counting, reset behavior, or supply connections.
How many bits can the CD4520BEX count?
Each counting section of the CD4520BEX provides a 4-bit binary count. According to the manufacturer product description, the device is a dual binary up-counter, so it contains two counting sections with independent clock inputs. The two-section architecture allows designers to use one section for an event count and the other for timing division or a separate sequencing task.
Is the CD4520BEX positive-edge triggered?
Yes, the CD4520BEX is positive-edge triggered and synchronous. Its count advances on the low-to-high transition of the active clock rather than throughout the high or low level. According to the CD4520B documentation, this edge-controlled operation supports predictable digital state changes when the counter is connected to synchronous logic, clocks, or sequential control circuitry.
What is the CD4520BEX supply voltage range?
The CD4520BEX operates from 3 V to 18 V. This range allows the counter to be used in both lower-voltage CMOS systems and traditional 5 V, 10 V, and 15 V logic environments. Confirm the output drive, input levels, and timing limits at the actual system supply voltage using the manufacturer's electrical-characteristics table before relying on a particular operating point.
What can replace CD4520BEX?
The closest drop-in choices are the same Texas Instruments CD4520B family in the 16-lead PDIP configuration, including CD4520BE, plus manufacturer-labeled CD4520BEX variants from Harris and RCA SOLID STATE. A replacement must match the 16-lead PDIP footprint, 4-bit binary counting behavior, positive-edge triggering, and 3 V to 18 V supply range. Verify the exact pin description and timing characteristics before production substitution.
Is CD4520BE the same as CD4520BEX?
CD4520BE and CD4520BEX identify catalog variants of the same Texas Instruments CD4520B binary-counter family, and both are associated with the 16-lead PDIP option. For a physical replacement, confirm that the purchased device has the same pin numbering, counter configuration, electrical characteristics, and lifecycle status. Treat the package suffix and any qualification or marking differences as procurement details that require datasheet verification.
When should I choose CD4520BEX over a BCD counter?
Choose the CD4520BEX when the system requires a natural 4-bit binary count, such as modulo-16 division, digital event counting, or binary state sequencing. Choose a BCD counter such as the CD4518 family when a human-readable decimal representation is required. The CD4520BEX is the better choice for binary arithmetic, address generation, and cascaded power-of-two division.
Where to buy CD4520BEX online?
Use the Request a Quote form on this page to ask for CD4520BEX availability, current lead time, and order handling. The form allows the request to be submitted directly without relying on a static catalog listing. Confirm the exact suffix, package marking, quantity, and delivery requirements when placing the request because CD4520 family variants use different package and ordering codes.
What is the price of CD4520BEX?
Current CD4520BEX pricing and quantity availability should be requested through the Request a Quote form on this page. The form is the appropriate channel for a current unit-price quote, bulk-break review, and lead-time confirmation. Include the required quantity, package suffix, target date, and shipment destination so the commercial response reflects the exact order.
What is the lead time for CD4520BEX?
Submit the Request a Quote form on this page with the required quantity and delivery schedule to obtain a current lead-time confirmation. Lead time can vary with order quantity, package suffix, and manufacturing status, so it should not be inferred from a general catalog listing. Ask the supplier to confirm the date on which the requested quantity can be allocated and shipped.
Is CD4520BEX in stock?
Request a current stock and allocation confirmation through the Request a Quote form on this page. Stock status should be checked for the exact CD4520BEX ordering code and required quantity, especially when production demand depends on a scheduled build. The same request can identify whether an alternate manufacturer-labeled CD4520BEX source is available if the primary source has a longer lead time.
What are the key specifications of CD4520BEX that engineers should know?
The CD4520BEX is a dual, 4-bit, binary CMOS up-counter with positive-edge triggering, a 3 V to 18 V supply range, and a 16-lead PDIP package. According to the Texas Instruments product documentation, it is synchronous and intended for counting and division functions. Its two counting sections make it useful for parallel event counting, cascading, or combining an event count with a timing-divider function.
CD4520BEX vs CD4518BE — which counter should I use?
The CD4520BEX counts in binary, while the CD4518BE is the BCD-oriented member of the related CD4518B/CD4520B family. Select the CD4520BEX for binary modulo operations, address sequencing, or power-of-two division; select the CD4518BE when the counter must directly represent decimal digits from 0 through 9. Package fit alone is not sufficient because the count encoding differs.

Data referensi engineering untuk CD4520BEX — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the CD4520BEX when a design needs a dual, 4-bit binary up-counter in a 16-lead PDIP package. It is well suited to binary modulo counting, power-of-two frequency division, event accumulation, industrial sequencing, and legacy through-hole control boards. Choose the related CD4518BE only when decimal-count encoding is required; the shared footprint does not make the two functions interchangeable. For new production, the Texas Instruments CD4520BE is the clearest same-family procurement choice when its exact ordering suffix and lifecycle status are acceptable. Harris Corporation or RCA SOLID STATE CD4520BEX sources can support traceability requirements, but the incoming device's pinout, timing, markings, and qualification documents should be checked before substitution. Avoid a CD4520B package option that changes the physical footprint, such as a small-outline or thin-shrink package, unless the PCB is redesigned.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini CD4520BE CD4520B CD4520BEX
Package PDIP-16 PDIP-16 PDIP-16 when ordered in E package PDIP-16
Brand Texas Instruments Texas Instruments Texas Instruments Harris Corporation
Counter Configuration Dual counter Dual counter Dual counter Dual counter
Count Width 4 bit 4 bit 4 bit 4 bit
Count Format Binary Binary Binary Binary
Count Direction Up Up Up Up
Triggering Edge Positive edge Positive edge Positive edge Positive edge
Operating Mode Synchronous Synchronous Synchronous Synchronous
Supply Voltage Range 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V
Logic Technology CMOS CMOS CMOS CMOS

Diferensiator Kunci

  • Two counting sections in one 16-lead package (vsCD4518BE)
  • Direct binary modulo-16 operation (vsCD4518BE)
  • Broad CMOS supply-voltage range (vsCD4520BE)

Catatan Desain

Route the clock signal as a short, continuous trace away from switching-regulator outputs, relay drivers, and motor power wiring. A false rising edge advances the count and can corrupt a position or event measurement. If the clock originates outside the PCB, add a controlled receiver or Schmitt-conditioning stage, and place any input filtering close to the CD4520BEX clock pin.

Follow the manufacturer decoupling recommendation for the selected 3 V to 18 V operating point. Place the supply capacitor close to the appropriate power and ground pins and provide a low-impedance ground return. Because legacy CMOS counters can be sensitive to supply transitions and unused CMOS inputs, hold the device in a defined state during power sequencing and avoid allowing unused clock or control inputs to float.

Do not substitute a BCD counter solely because it uses the same 16-lead PDIP outline. CD4520B counts in binary, while a CD4518-family device uses decade encoding. Their outputs therefore represent different state sequences even when the footprint matches. Review the complete pin description, truth table, reset behavior, timing characteristics, and maximum ratings before approving a substitute.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer product page and distributor listings do not state the requested compliance classifications. AEC-Q100 is not applicable to this legacy CMOS logic counter.

Data disahkan pada: 2026-11-19 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

cd4520be datasheet cd4520b datasheet CD4520BEX datasheet pdf CD4520BEX pinout CD4520BEX DIP-16 CD4520BEX equivalent CD4520BEX replacement CD4520BEX cross reference CD4520BEX vs CD4518BE CD4520BEX price CD4520BEX stock Texas Instruments CD4520BEX CD4520B 3V 18V CMOS counter CD4520B binary up counter application

Komponen dan Istilah Terkait

Texas Instruments CD4520BEX CD4520B CD4520BE CD4518BE Harris Corporation RCA SOLID STATE L3Harris Technologies CMOS dual binary up-counter 4-bit counter logic IC synchronous counter positive-edge trigger PDIP-16 DIP package family through-hole technology binary counter counter and divider digital logic frequency division industrial control event counting power management input voltage
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ