CD4520BEX - Dual 4-Bit Binary Counter | Texas Instruments
料号: CD4520BEX ✓ 量产中CD4520BEX 概述
A binary counter is a sequential digital-logic component that stores a multi-bit count and advances that count on a triggering edge. The CD4520B belongs to the counter and divider hierarchy within CMOS logic ICs, combining two counting sections in one package. Binary counters are useful when a system needs modulo operation, event counting, timing division, state progression, or an encoded count for downstream logic.
The principal features of the CD4520BEX include dual-counter operation, 4-bit binary counting, positive-edge triggering, and operation from 3 V to 18 V. Each counting section provides a practical division or modulo function when cascaded or configured in a system. The 16-lead PDIP package supports through-hole assembly, prototyping, repair, and legacy industrial equipment where a surface-mount package would be unsuitable.
Internally, the CD4520B is identified as a CMOS synchronous, positive-edge-triggered binary counter. Positive-edge triggering means the count changes when the clock input transitions from a low level to a high level. Synchronous operation helps maintain controlled state changes at the active clock edge, which is important when the counter output feeds synchronous control or display circuitry. The CD4520B and CD4518B families are related but are not functionally identical because their count formats differ.
Typical implementations include digital event counters, programmable timing dividers, industrial sequence controllers, pulse-counting interfaces, stepper-motor position counters, and general-purpose binary state machines. The counter is particularly useful when a compact 4-bit count must be divided by a power of two or expanded through cascaded stages.
PCB design should provide a stable clock path, a defined reset path, and adequate bypassing near the power pins. Keep clock traces away from noisy switching nodes and use a pull-down resistor when the unused clock input could float. For new production designs, verify the complete logic-state, timing, and absolute-maximum-rating tables in the manufacturer datasheet before assigning inputs or selecting external components.
This page combines the manufacturer product information with practical counter-selection guidance, verified same-package alternatives, pin and timing considerations, and application-specific design notes. It also identifies where timing limits, electrical characteristics, and detailed pin descriptions must be taken directly from the CD4520B datasheet before final circuit release.
直接替换替代料: CD4520BEX ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: CD4520BEX (相同外形与封装尺寸) ——差异在于 Counter Width, Mounting Type, Counter Type, Output Type, Package.
CD4520BE
✅ 直接替换联系询价
查看数据手册 →CD4520BD
✅ 直接替换联系询价
查看数据手册 →CD4520BEX
✅ 直接替换联系询价
查看数据手册 →CD4520BEX 最大额定值与电气特性
| Supply Voltage Range | 3 V to 18 V |
| Logic Family | CMOS |
| Counter Configuration | Dual counter |
| Count Direction | Up |
| Count Format | Binary |
| Counter Width | 4 bit |
| Number of Counting Elements | 2 |
| Triggering Edge | Positive edge |
| Operation Mode | Synchronous |
| Package Type | PDIP-16 |
| Lead Count | 16 |
| 安装类型 | Through-hole |
CD4520BEX pdip-16 引脚配置指南
CD4520BEX(pdip-16 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: CD4520BEX.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CD4520BEX 适用于 6 应用s: Digital Event Counting, Frequency Division, Industrial Sequence Control, Programmable Timer, Stepper-Motor Position Counter, Pulse and Repetition Counter.
Digital Event Counting
The CD4520BEX is suitable for counting discrete events because each positive clock edge advances its 4-bit binary state. Use one counter section to accumulate pulses from a sensor, switch, or sensor-conditioning circuit and then read the binary result through four output lines. Its 3 V to 18 V operating range supports multiple logic environments, while the 16-lead PDIP package simplifies through-hole assembly. When the event source can be noisy, use a conditioned clock signal and maintain a defined state when the counter is not clocked.
推荐
Frequency Division
The CD4520BEX can divide an incoming pulse train by powers of two through its 4-bit binary count. A periodic clock at the counter input produces a lower-frequency carry state when the terminal count is reached, making the device useful for clock-rate reduction, periodic sampling, and slow sequencing. Because the counter is positive-edge triggered, the source must present clean transitions. The 3 V to 18 V supply range also allows timing sections to operate beside both lower-voltage and legacy CMOS circuits.
推荐
Industrial Sequence Control
The dual-counter architecture of the CD4520BEX can support industrial sequencing when one section tracks a process step and the other counts machine events. Its four binary outputs provide a compact state representation for logic gates, selectors, or programmable controllers. The PDIP-16 package is particularly useful for legacy machinery, test fixtures, and control boards that use through-hole assembly. Validate the counter's exact reset behavior and timing limits against the manufacturer datasheet before connecting it to safety-related or high-energy equipment.
推荐
Programmable Timer
A CD4520BEX can divide a stable periodic clock and provide a carry pulse at the end of a 4-bit count interval, creating a useful timer base for elapsed-time measurement or periodic control. Cascading counter sections can extend the effective count range while preserving binary operation. Choose the counter section whose reset, clock, and carry connections match the intended state diagram in the manufacturer datasheet. Its 3 V to 18 V range provides flexibility, but timing margins must be checked at the actual supply voltage and load.
推荐
Stepper-Motor Position Counter
The CD4520BEX can count step-command pulses and maintain a four-bit position state for small stepper-motor control or laboratory positioning systems. Positive-edge triggering aligns each count with a commanded motor step, while the binary outputs simplify decoding into control logic. The dual-counter configuration can provide an auxiliary event or revolution count. Add mechanical noise filtering or a Schmitt-conditioned input where long motor wiring could introduce false clock transitions, and use the reset input only with a controlled reset network.
推荐
Pulse and Repetition Counter
The CD4520BEX is appropriate for repetition-counting circuits in test equipment, dispensing systems, and repetitive machinery. Each accepted input pulse advances the 4-bit count, allowing a controller to compare the terminal state and stop or change the sequence after a prescribed number of events. Two sections allow related repetitions to be counted independently. Keep the clock path away from switching power nodes and use a defined reset state so power-up conditions do not create an unintended count sequence.
推荐
推荐产品汇总
工程参考数据: CD4520BEX ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CD4520BE | CD4520B | CD4520BEX |
|---|---|---|---|---|
| Package | PDIP-16 | PDIP-16 | PDIP-16 when ordered in E package | PDIP-16 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Harris Corporation |
| Counter Configuration | Dual counter | Dual counter | Dual counter | Dual counter |
| Count Width | 4 bit | 4 bit | 4 bit | 4 bit |
| Count Format | Binary | Binary | Binary | Binary |
| Count Direction | Up | Up | Up | Up |
| Triggering Edge | Positive edge | Positive edge | Positive edge | Positive edge |
| Operating Mode | Synchronous | Synchronous | Synchronous | Synchronous |
| Supply Voltage Range | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V |
| Logic Technology | CMOS | CMOS | CMOS | CMOS |
关键差异点
- Two counting sections in one 16-lead package (对比 CD4518BE)
- Direct binary modulo-16 operation (对比 CD4518BE)
- Broad CMOS supply-voltage range (对比 CD4520BE)
设计说明
Route the clock signal as a short, continuous trace away from switching-regulator outputs, relay drivers, and motor power wiring. A false rising edge advances the count and can corrupt a position or event measurement. If the clock originates outside the PCB, add a controlled receiver or Schmitt-conditioning stage, and place any input filtering close to the CD4520BEX clock pin.
Follow the manufacturer decoupling recommendation for the selected 3 V to 18 V operating point. Place the supply capacitor close to the appropriate power and ground pins and provide a low-impedance ground return. Because legacy CMOS counters can be sensitive to supply transitions and unused CMOS inputs, hold the device in a defined state during power sequencing and avoid allowing unused clock or control inputs to float.
Do not substitute a BCD counter solely because it uses the same 16-lead PDIP outline. CD4520B counts in binary, while a CD4518-family device uses decade encoding. Their outputs therefore represent different state sequences even when the footprint matches. Review the complete pin description, truth table, reset behavior, timing characteristics, and maximum ratings before approving a substitute.
合规信息
The manufacturer product page and distributor listings do not state the requested compliance classifications. AEC-Q100 is not applicable to this legacy CMOS logic counter.