CS4352-DZZ - 24-Bit 192 kHz Stereo DAC | Cirrus Logic
MPN: CS4352-DZZ ✗ Akhir HidupCS4352-DZZ Ringkasan
An audio DAC is a signal-conversion IC that transforms digital audio samples into an analog voltage suitable for headphones, powered speakers, line inputs, and other audio amplification stages. Within the signal-chain hierarchy, the CS4352-DZZ belongs to the digital-to-analog converter category and supports consumer, professional, and automotive audio systems. Its integrated line driver reduces the need for separate output-buffer circuitry when the load requirements are met.
The principal features include 24-bit resolution, operation up to 192 kHz, a 102 dB D/A converter dynamic-range rating, integrated 2 Vrms line drivers, stereo mute controls, and an auto-mute function. Digital de-emphasis and analog low-pass filtering are integrated into the converter, allowing the device to process the complete stereo digital-to-analog signal path. The hardware-mode-only architecture makes the device suitable for designs centered on predictable audio-channel operation.
Internally, the fifth-order multi-bit delta-sigma modulator shapes quantization noise away from the audio band. The analog output stage then reconstructs left and right channels through integrated filtering and line drivers. This combination provides a compact implementation while avoiding the discrete resistor ladder and separate output stage normally associated with high-resolution conversion. The datasheet also identifies a 106 dB A-weighted dynamic-range figure for the related documented family specification, while distributor descriptions identify the CS4352-DZZ as a 102 dB stereo DAC.
Typical uses include digital audio players, home-theater equipment, active speakers, automotive infotainment systems, professional audio electronics, and multi-channel audio products. SPI-compatible serial control supports digital audio interfaces, while the integrated line-level outputs are suited to systems requiring a balanced stereo analog source without an external line-output stage.
Designers should match the digital interface, analog output loading, supply requirements, and pin multiplexing of the selected production suffix against the manufacturer datasheet. The 20-pin TSSOP footprint is compact, but clean separation of digital and analog return paths remains important for low-noise audio performance. Confirm the commercial or automotive temperature grade required by the finished equipment before releasing the BOM.
This page combines the CS4352-DZZ specifications, lifecycle information, package details, drop-in alternatives, comparison parameters, and practical implementation guidance in one engineering-focused reference. It is intended to accelerate component selection, schematic review, sourcing, and second-source qualification for stereo DAC designs.
Alternatif penggantian untuk CS4352-DZZ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian CS4352-DZZ (sama faktor bentuk dan footprint) — berbeda di dalam Dynamic Range, Modulator Architecture.
CS4352-DZZR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CS4352-CZZR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CS4352-DZZ Rating Maksimal & Karakteristik Listrik
| Converter Type | Stereo audio digital-to-analog converter |
| Resolusi | 24 bit |
| Maximum Sample Rate | 192 kHz |
| Dynamic Range | 102 dB |
| A-Weighted Dynamic Range | 106 dB |
| Total Harmonic Distortion plus Noise | -93 dB |
| Line Output | 2 Vrms |
| Digital Interface | SPI |
| Channel Count | 2 channels |
| Modulator Architecture | Fifth-order multi-bit delta-sigma |
| Analog Output Stage | Integrated stereo line driver |
| Output Filter | Integrated analog low-pass filter |
| Digital De-emphasis | Supported |
| Mute Function | Stereo mute with auto-mute function |
| Control Mode | Hardware mode only |
| Paket | 20-pin TSSOP |
| Commercial Temperature Range | -40°C to +85°C |
| Automotive Temperature Range | -40°C to +105°C |
| Evaluation Board | CDB4352 customer demonstration board |
CS4352-DZZ 20-pin tssop Diamant Konfigurasi Panduan
Konfigurasi pin untuk CS4352-DZZ (20-pin tssop pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk CS4352-DZZ.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
CS4352-DZZ cocok untuk 6 aplikasis: Digital Audio Player, Home Theater Audio, Automotive Infotainment, Professional Audio Equipment, Active Speaker Interface, Multi-Channel Audio System.
Digital Audio Player
The CS4352-DZZ fits a digital audio player that requires a compact, high-resolution stereo output stage. Its 24-bit conversion capability and operation up to 192 kHz suit digital playback systems, while the integrated 2 Vrms line drivers reduce the number of external analog output stages. The device also provides digital de-emphasis, analog low-pass filtering, stereo mute controls, and an auto-mute function. Confirm serial-interface timing, master-clock requirements, supported sample rates, and output loading against the manufacturer datasheet before layout release.
Direkomendasikan
Home Theater Audio
CS4352-DZZ can provide the stereo line-level conversion stage in a home-theater receiver, sound-bar controller, or powered-speaker interface. Its integrated left and right 2 Vrms outputs reduce analog buffering requirements when the connected amplifier presents a compatible load. A 192 kHz maximum sample rate supports high-resolution source formats, and the fifth-order multi-bit delta-sigma architecture filters quantization noise. The design must preserve the required digital-to-analog return path separation and verify mute timing during channel changes.
Direkomendasikan
Automotive Infotainment
The CS4352 family is applicable to automotive audio and infotainment products requiring a line-level stereo DAC. It combines 24-bit conversion, rates up to 192 kHz, integrated 2 Vrms line drivers, and automatic mute handling in a 20-pin TSSOP package. An automotive-grade configuration supports a documented -40°C to +105°C temperature range, but the exact orderable suffix must be selected and checked against the ordering table. Production designs should also review qualification, load-dump protection, EMC requirements, and automotive traceability requirements.
Direkomendasikan
Professional Audio Equipment
CS4352-DZZ can serve as the stereo digital-to-analog conversion element in compact professional-audio equipment that accepts digital audio and requires line-level outputs. The 102 dB device dynamic-range rating and 192 kHz maximum sample rate align with high-resolution playback and monitoring equipment, while integrated filtering simplifies the output path. The TSSOP-20 package supports compact layouts, although careful partitioning of digital clock signals, analog supplies, and ground returns is necessary to prevent converter noise from reaching sensitive preamplifier stages.
Direkomendasikan
Active Speaker Interface
An active-speaker controller can use the CS4352-DZZ to convert a digital audio stream into two 2 Vrms line-level outputs before the power-amplifier stage. Integrating the line driver reduces the need for a separate output-buffer circuit when the amplifier input impedance and cable load satisfy the datasheet requirements. The stereo mute and auto-mute functions help suppress unwanted output during startup or signal loss. Validate the output amplitude, load capability, startup sequence, and channel-synchronization behavior in the complete speaker electronics.
Direkomendasikan
Multi-Channel Audio System
CS4352-DZZ can be used in each stereo channel of a multi-zone or multi-channel audio system when individual channels require dedicated conversion and mute control. Its 24-bit resolution supports high-quality digital sources, and the 192 kHz capability is useful for high-resolution multichannel distribution. Each converter requires compatible digital audio and clocking, appropriately decoupled analog supplies, and careful ground routing. Because the documented architecture is hardware-mode only, the system controller must configure the required operating state through the supported interface and pin arrangement.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk CS4352-DZZ — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | CS4352-DZZR | CS4352-CZZR |
|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Converter Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
| Resolution | 24 bit | 24 bit | 24 bit |
| Maximum Sample Rate | 192 kHz | 192 kHz | 192 kHz |
| Dynamic Range | 102 dB | 102 dB | 102 dB |
| Line Output | 2 Vrms | 2 Vrms | 2 Vrms |
| Digital Interface | SPI | SPI | SPI |
| Control Mode | Hardware mode only | Hardware mode only | Hardware mode only |
| Mute Features | Stereo mute and auto-mute | Stereo mute and auto-mute | Stereo mute and auto-mute |
Diferensiator Kunci
- Integrated stereo line-output stage (vsCS4352-DZZR)
- High-resolution conversion at 192 kHz (vsCS4352-CZZR)
- Integrated filtering and de-emphasis (vsCS4352-DZZR)
- Automated output muting (vsCS4352-CZZR)
Catatan Desain
Keep the digital interface and clock-routing region physically separated from the stereo analog outputs to reduce coupling into the line drivers. Follow the pin-assignment and decoupling guidance in the CS4352_DS684F2 manufacturer datasheet. Place the required input and output capacitors close to their associated pins, use a continuous analog ground region where appropriate, and connect digital returns back to the system ground through a deliberate return path rather than through the sensitive analog-output area.
Do not substitute the base device name without checking the complete ordering suffix. The family includes commercial and automotive temperature options, and suffix changes can affect packing, grade, and procurement status. Confirm the exact MPN in the ordering table, validate the temperature range for the finished product, and inspect the supported digital interface mode before releasing a replacement to manufacturing.
Treat MCLK, LRCK, serial data, and serial clock as a coordinated digital-audio subsystem. Use short, continuous traces with return paths arranged to minimize loop area, avoid routing clock edges beneath the analog outputs, and observe any interface timing or routing constraints stated in the manufacturer datasheet. The hardware-mode-only architecture also requires the external control pins to be connected in the supported state, so review the hardware configuration table before fabrication.
Informasi Konformitas
The manufacturer documentation identifies commercial and automotive temperature grades, but it does not explicitly establish the requested compliance fields for the exact CS4352-DZZ suffix.