CS4352-DZZ - 24-Bit 192 kHz Stereo DAC | Cirrus Logic
MPN: CS4352-DZZ ✗ 停產CS4352-DZZ 概覽
An audio DAC is a signal-conversion IC that transforms digital audio samples into an analog voltage suitable for headphones, powered speakers, line inputs, and other audio amplification stages. Within the signal-chain hierarchy, the CS4352-DZZ belongs to the digital-to-analog converter category and supports consumer, professional, and automotive audio systems. Its integrated line driver reduces the need for separate output-buffer circuitry when the load requirements are met.
The principal features include 24-bit resolution, operation up to 192 kHz, a 102 dB D/A converter dynamic-range rating, integrated 2 Vrms line drivers, stereo mute controls, and an auto-mute function. Digital de-emphasis and analog low-pass filtering are integrated into the converter, allowing the device to process the complete stereo digital-to-analog signal path. The hardware-mode-only architecture makes the device suitable for designs centered on predictable audio-channel operation.
Internally, the fifth-order multi-bit delta-sigma modulator shapes quantization noise away from the audio band. The analog output stage then reconstructs left and right channels through integrated filtering and line drivers. This combination provides a compact implementation while avoiding the discrete resistor ladder and separate output stage normally associated with high-resolution conversion. The datasheet also identifies a 106 dB A-weighted dynamic-range figure for the related documented family specification, while distributor descriptions identify the CS4352-DZZ as a 102 dB stereo DAC.
Typical uses include digital audio players, home-theater equipment, active speakers, automotive infotainment systems, professional audio electronics, and multi-channel audio products. SPI-compatible serial control supports digital audio interfaces, while the integrated line-level outputs are suited to systems requiring a balanced stereo analog source without an external line-output stage.
Designers should match the digital interface, analog output loading, supply requirements, and pin multiplexing of the selected production suffix against the manufacturer datasheet. The 20-pin TSSOP footprint is compact, but clean separation of digital and analog return paths remains important for low-noise audio performance. Confirm the commercial or automotive temperature grade required by the finished equipment before releasing the BOM.
This page combines the CS4352-DZZ specifications, lifecycle information, package details, drop-in alternatives, comparison parameters, and practical implementation guidance in one engineering-focused reference. It is intended to accelerate component selection, schematic review, sourcing, and second-source qualification for stereo DAC designs.
直接替換替代品,適用於 CS4352-DZZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: CS4352-DZZ (相同外形與佔位) — 差異在於 Dynamic Range, Modulator Architecture.
CS4352-DZZR
✅ 直接替換📋 參考替代品(不在目錄中)
CS4352-CZZR
✅ 直接替換📋 參考替代品(不在目錄中)
CS4352-DZZ 最大額定值與電氣特性
| Converter Type | Stereo audio digital-to-analog converter |
| 解析度 | 24 bit |
| Maximum Sample Rate | 192 kHz |
| Dynamic Range | 102 dB |
| A-Weighted Dynamic Range | 106 dB |
| Total Harmonic Distortion plus Noise | -93 dB |
| Line Output | 2 Vrms |
| Digital Interface | SPI |
| Channel Count | 2 channels |
| Modulator Architecture | Fifth-order multi-bit delta-sigma |
| Analog Output Stage | Integrated stereo line driver |
| Output Filter | Integrated analog low-pass filter |
| Digital De-emphasis | Supported |
| Mute Function | Stereo mute with auto-mute function |
| Control Mode | Hardware mode only |
| 封裝 | 20-pin TSSOP |
| Commercial Temperature Range | -40°C to +85°C |
| Automotive Temperature Range | -40°C to +105°C |
| Evaluation Board | CDB4352 customer demonstration board |
CS4352-DZZ 20-pin tssop 腳位配置指南
CS4352-DZZ(20-pin tssop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: CS4352-DZZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS4352-DZZ 適用於 6 應用s: Digital Audio Player, Home Theater Audio, Automotive Infotainment, Professional Audio Equipment, Active Speaker Interface, Multi-Channel Audio System.
Digital Audio Player
The CS4352-DZZ fits a digital audio player that requires a compact, high-resolution stereo output stage. Its 24-bit conversion capability and operation up to 192 kHz suit digital playback systems, while the integrated 2 Vrms line drivers reduce the number of external analog output stages. The device also provides digital de-emphasis, analog low-pass filtering, stereo mute controls, and an auto-mute function. Confirm serial-interface timing, master-clock requirements, supported sample rates, and output loading against the manufacturer datasheet before layout release.
推薦
Home Theater Audio
CS4352-DZZ can provide the stereo line-level conversion stage in a home-theater receiver, sound-bar controller, or powered-speaker interface. Its integrated left and right 2 Vrms outputs reduce analog buffering requirements when the connected amplifier presents a compatible load. A 192 kHz maximum sample rate supports high-resolution source formats, and the fifth-order multi-bit delta-sigma architecture filters quantization noise. The design must preserve the required digital-to-analog return path separation and verify mute timing during channel changes.
推薦
Automotive Infotainment
The CS4352 family is applicable to automotive audio and infotainment products requiring a line-level stereo DAC. It combines 24-bit conversion, rates up to 192 kHz, integrated 2 Vrms line drivers, and automatic mute handling in a 20-pin TSSOP package. An automotive-grade configuration supports a documented -40°C to +105°C temperature range, but the exact orderable suffix must be selected and checked against the ordering table. Production designs should also review qualification, load-dump protection, EMC requirements, and automotive traceability requirements.
推薦
Professional Audio Equipment
CS4352-DZZ can serve as the stereo digital-to-analog conversion element in compact professional-audio equipment that accepts digital audio and requires line-level outputs. The 102 dB device dynamic-range rating and 192 kHz maximum sample rate align with high-resolution playback and monitoring equipment, while integrated filtering simplifies the output path. The TSSOP-20 package supports compact layouts, although careful partitioning of digital clock signals, analog supplies, and ground returns is necessary to prevent converter noise from reaching sensitive preamplifier stages.
推薦
Active Speaker Interface
An active-speaker controller can use the CS4352-DZZ to convert a digital audio stream into two 2 Vrms line-level outputs before the power-amplifier stage. Integrating the line driver reduces the need for a separate output-buffer circuit when the amplifier input impedance and cable load satisfy the datasheet requirements. The stereo mute and auto-mute functions help suppress unwanted output during startup or signal loss. Validate the output amplitude, load capability, startup sequence, and channel-synchronization behavior in the complete speaker electronics.
推薦
Multi-Channel Audio System
CS4352-DZZ can be used in each stereo channel of a multi-zone or multi-channel audio system when individual channels require dedicated conversion and mute control. Its 24-bit resolution supports high-quality digital sources, and the 192 kHz capability is useful for high-resolution multichannel distribution. Each converter requires compatible digital audio and clocking, appropriately decoupled analog supplies, and careful ground routing. Because the documented architecture is hardware-mode only, the system controller must configure the required operating state through the supported interface and pin arrangement.
推薦
推薦產品摘要
工程參考資料,適用於 CS4352-DZZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CS4352-DZZR | CS4352-CZZR |
|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Converter Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
| Resolution | 24 bit | 24 bit | 24 bit |
| Maximum Sample Rate | 192 kHz | 192 kHz | 192 kHz |
| Dynamic Range | 102 dB | 102 dB | 102 dB |
| Line Output | 2 Vrms | 2 Vrms | 2 Vrms |
| Digital Interface | SPI | SPI | SPI |
| Control Mode | Hardware mode only | Hardware mode only | Hardware mode only |
| Mute Features | Stereo mute and auto-mute | Stereo mute and auto-mute | Stereo mute and auto-mute |
主要差異化特點
- Integrated stereo line-output stage (對比CS4352-DZZR)
- High-resolution conversion at 192 kHz (對比CS4352-CZZR)
- Integrated filtering and de-emphasis (對比CS4352-DZZR)
- Automated output muting (對比CS4352-CZZR)
設計說明
Keep the digital interface and clock-routing region physically separated from the stereo analog outputs to reduce coupling into the line drivers. Follow the pin-assignment and decoupling guidance in the CS4352_DS684F2 manufacturer datasheet. Place the required input and output capacitors close to their associated pins, use a continuous analog ground region where appropriate, and connect digital returns back to the system ground through a deliberate return path rather than through the sensitive analog-output area.
Do not substitute the base device name without checking the complete ordering suffix. The family includes commercial and automotive temperature options, and suffix changes can affect packing, grade, and procurement status. Confirm the exact MPN in the ordering table, validate the temperature range for the finished product, and inspect the supported digital interface mode before releasing a replacement to manufacturing.
Treat MCLK, LRCK, serial data, and serial clock as a coordinated digital-audio subsystem. Use short, continuous traces with return paths arranged to minimize loop area, avoid routing clock edges beneath the analog outputs, and observe any interface timing or routing constraints stated in the manufacturer datasheet. The hardware-mode-only architecture also requires the external control pins to be connected in the supported state, so review the hardware configuration table before fabrication.
合規資訊
The manufacturer documentation identifies commercial and automotive temperature grades, but it does not explicitly establish the requested compliance fields for the exact CS4352-DZZ suffix.