CS5330A-KS - 18-Bit Stereo ADC | Cirrus Logic Inc.
MPN: CS5330A-KS ✓ AktifCS5330A-KS Ringkasan
An ADC, or analog-to-digital converter, is an integrated circuit that converts continuously varying analog voltages into numerical values. The CS5330A belongs to the sigma-delta ADC family, a signal-chain class commonly used for high-resolution audio because it combines oversampling, digital filtering, and noise shaping. Within the broader semiconductor hierarchy, it is a data-conversion IC and a precision analog signal-processing device.
The converter provides 18-bit resolution, 94 dB dynamic range, and a serial output interface. Its sampling rate can be continuously adjusted between 2 kHz and 50 kHz, allowing one device to serve multiple digital-audio clocking schemes. The manufacturer datasheet identifies a linear-phase digital anti-alias filter with a passband extending to 21.7 kHz, passband ripple of 0.05 dB, and stopband rejection greater than 80 dB. These characteristics help remove out-of-band energy before conversion while preserving in-band audio fidelity.
The CS5330A/31A family operates from a single +5 V supply and requires approximately 150 mW during normal operation. Its integrated filtering reduces the need for an external analog anti-alias network, while the low power requirement supports portable and space-constrained audio equipment. The CS5330A-KS is specified for industrial screening over -40°C to +85°C and uses a lead-free SOIC-8 package.
Typical applications include digital recording equipment, audio interfaces, multimedia systems, consumer audio products, and stereo capture modules. Its 18-bit conversion resolution supports professional and consumer audio conversion tasks, while the 2 kHz to 50 kHz sampling-rate range accommodates different playback, communication, and recording formats.
When laying out the circuit, place the analog input and supply bypass capacitors close to their associated pins and route serial clock and data traces away from sensitive audio inputs. Confirm the interface-voltage levels and master-clock arrangement against the manufacturer pin-description table before finalizing the PCB because the operating architecture depends on the surrounding digital-audio system.
This product record combines the converter’s key electrical and package specifications, practical application guidance, family-level replacement information, and a parameter comparison that helps engineers assess the CS5330A-KS before integrating it into an audio signal chain.
Alternatif penggantian untuk CS5330A-KS — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian CS5330A-KS (sama faktor bentuk dan footprint) — berbeda di dalam Package, Number of Channels, Pin Count, Operating Temperature, Supply Voltage.
CS5331A-DS
✅ Drop-InKontak untuk harga
Lihat Datasheet →CS5330A-KS Rating Maksimal & Karakteristik Listrik
| ADC Type | Sigma-delta |
| Resolusi | 18 bit |
| Number of Channels | 2 channels |
| Laju Pengambilan Sampel | 2 kHz to 50 kHz |
| Dynamic Range | 94 dB |
| Tegangan Pemuat | 4.75 V to 5.25 V |
| Digital Input Voltage | 3.6 V to 4.4 V |
| Normal Operating Power | 150 mW |
| Digital Filter Passband | 21.7 kHz |
| Passband Ripple | 0.05 dB |
| Stopband Rejection | >80 dB |
| Suhu Kerja | -40°C to +85°C |
| Screening Level | Industrial |
| Paket | SOIC-8, lead-free |
| Jumlah Pin | 8 pins |
| Tipe Mounting | Surface mount |
CS5330A-KS soic-8, lead-free Diamant Konfigurasi Panduan
Konfigurasi pin untuk CS5330A-KS (soic-8, lead-free pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk CS5330A-KS.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
CS5330A-KS cocok untuk 6 aplikasis: Digital Audio Recording, Professional Audio Interface, Multimedia Audio Capture, Portable Audio Device, Consumer Audio Playback, Industrial Instrumentation.
Digital Audio Recording
The CS5330A-KS is well suited to stereo digital recording because it converts both audio channels at 18-bit resolution with 94 dB dynamic range. Its sample rate can be adjusted from 2 kHz to 50 kHz, allowing a design to support multiple recording and playback clocking formats. The integrated linear-phase digital anti-alias filter reaches 21.7 kHz with only 0.05 dB passband ripple and more than 80 dB stopband rejection, reducing the need for a separate digital filtering stage. Normal operating power is approximately 150 mW, which benefits compact portable recorders.
Direkomendasikan
Professional Audio Interface
The CS5330A-KS can form the stereo capture stage of a professional or semi-professional audio interface. Its 18-bit conversion and 94 dB dynamic range provide useful headroom for line-level input conditioning, while the 2 kHz to 50 kHz range supports several project sample-rate requirements. The integrated anti-alias filtering simplifies the digital signal path, and the single +5 V supply reduces the number of rails required around the converter. Board designers should still isolate clocks and serial data from analog inputs to preserve low-noise operation.
Direkomendasikan
Multimedia Audio Capture
The CS5330A-KS is appropriate for multimedia equipment that captures stereo audio alongside video or communications streams. Its two-channel architecture supplies synchronized left- and right-channel 18-bit results in serial form, and the adjustable sampling rate allows direct adaptation to the host digital-audio clock. Because the converter integrates anti-alias filtering and needs only one +5 V supply, it can simplify the analog front end of a compact set-top, control panel, or consumer media appliance while supporting a -40°C to +85°C industrial temperature range.
Direkomendasikan
Portable Audio Device
The approximately 150 mW normal operating requirement makes the CS5330A-KS suitable for portable equipment where converter power contributes to battery budget. Its 18-bit stereo resolution and 94 dB dynamic range suit playback, recording, and communications audio, while the integrated anti-alias filter reduces external filtering overhead. A battery-powered implementation must provide a regulated +5 V rail through an efficient boost stage. The compact SOIC-8 package and single-supply architecture simplify board-area planning in compact portable products.
Direkomendasikan
Consumer Audio Playback
The CS5330A-KS can be used in consumer audio products requiring two-channel digital conversion rather than a single-channel acquisition path. Its serial output represents 18-bit values for both channels, and the 2 kHz to 50 kHz sample-rate range accommodates common embedded audio workflows. The linear-phase digital filter provides 21.7 kHz passband, 0.05 dB ripple, and more than 80 dB stopband rejection, supporting clean in-band reproduction. Integration reduces the need for a discrete anti-alias filter and makes the converter practical for compact playback and monitoring electronics.
Direkomendasikan
Industrial Instrumentation
The CS5330A-KS can support stereo measurement channels in industrial instrumentation and data-acquisition equipment operating from -40°C to +85°C. Its sigma-delta architecture, 18-bit resolution, and 94 dB dynamic range are suitable for slow or medium-rate precision measurements, while the adjustable sample rate extends from 2 kHz to 50 kHz. Integrated anti-alias filtering helps control out-of-band energy before conversion. Layout should prioritize low-noise analog grounding, short supply bypass paths, and separation between sensitive inputs and the digital clock interface.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk CS5330A-KS — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | CS5331A-DS |
|---|---|---|
| Package | SOIC-8, lead-free | SOIC-8 |
| Brand | Cirrus Logic Inc. | Cirrus Logic Inc. |
| ADC Type | Sigma-delta | Sigma-delta |
| Resolution | 18 bit | 18 bit |
| Channels | 2 channels | 2 channels |
| Sampling Rate | 2 kHz to 50 kHz | 2 kHz to 50 kHz |
| Dynamic Range | 94 dB | 94 dB |
| Supply Voltage | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Power Consumption | 150 mW normal operation | 150 mW normal operation |
Diferensiator Kunci
- Complete integrated stereo conversion and anti-alias filtering (vsCS5331A-DS)
- Broadly adjustable output sampling rate (vsCS5331A-DS)
- Low normal operating consumption (vsCS5331A-DS)
- Single +5 V family architecture (vsCS5331A-DS)
Catatan Desain
Place the CS5330A-KS bypass capacitors beside the +5 V and ground pins, with the shortest practical trace and via connections. Keep analog input traces away from the serial clock, latch, and data lines. The device performs stereo conversion in a compact SOIC-8 package, so pin-trace geometry has a direct effect on noise pickup. Use a continuous ground reference under the analog section and avoid routing digital return current through sensitive input-return paths.
Treat the clock and serial-data connections as a coordinated digital interface rather than independent nets. Maintain the timing relationships specified in the manufacturer datasheet and avoid long stubs between the converter and the receiving device. The 2 kHz to 50 kHz output-rate range does not change the requirement for clean clock delivery, because clock jitter and edge noise can affect conversion timing even when the analog filter characteristics meet their stated values.
Do not select the CS5330A-KS from package shape alone and assume that every 8-pin stereo ADC is interchangeable. Confirm pin assignments, clock master/slave behavior, operating mode, serial output timing, and analog input arrangement from the CS5330A/31A family datasheet. Also distinguish the CS5330A-KS from ordering or reel-code variants, which do not necessarily represent a different electrical design. A footprint match alone does not establish functional drop-in compatibility.
Budget the converter from its approximately 150 mW normal operating requirement and use the 4.75 V to 5.25 V supply range for design margins. In battery-powered equipment, include the conversion loss of the upstream 5 V regulator rather than treating the ADC consumption as the complete system draw. Validate startup, clock stability, and analog settling before enabling downstream processing to avoid capturing unsettled conversion results.
Informasi Konformitas
The part is identified as a lead-free SOIC-8 component and is screened for industrial operation. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer compliance documentation.