Cirrus Logic Inc.

CS5330A-KS - 18-Bit Stereo ADC | Cirrus Logic Inc.

부품 번호: CS5330A-KS ✓ 활성
4.75 V to 5.25 V Vdss SOIC-8, lead-free Package
MOQ: 1 |

CS5330A-KS 개요

The Cirrus Logic Inc. CS5330A-KS is an 18-bit stereo sigma-delta analog-to-digital converter with an adjustable sampling rate from 2 kHz to 50 kHz, housed in an 8-pin SOIC package. It converts left and right audio channels and includes integrated anti-alias filtering, making it a complete serial-output audio ADC solution.

An ADC, or analog-to-digital converter, is an integrated circuit that converts continuously varying analog voltages into numerical values. The CS5330A belongs to the sigma-delta ADC family, a signal-chain class commonly used for high-resolution audio because it combines oversampling, digital filtering, and noise shaping. Within the broader semiconductor hierarchy, it is a data-conversion IC and a precision analog signal-processing device.

The converter provides 18-bit resolution, 94 dB dynamic range, and a serial output interface. Its sampling rate can be continuously adjusted between 2 kHz and 50 kHz, allowing one device to serve multiple digital-audio clocking schemes. The manufacturer datasheet identifies a linear-phase digital anti-alias filter with a passband extending to 21.7 kHz, passband ripple of 0.05 dB, and stopband rejection greater than 80 dB. These characteristics help remove out-of-band energy before conversion while preserving in-band audio fidelity.

The CS5330A/31A family operates from a single +5 V supply and requires approximately 150 mW during normal operation. Its integrated filtering reduces the need for an external analog anti-alias network, while the low power requirement supports portable and space-constrained audio equipment. The CS5330A-KS is specified for industrial screening over -40°C to +85°C and uses a lead-free SOIC-8 package.

Typical applications include digital recording equipment, audio interfaces, multimedia systems, consumer audio products, and stereo capture modules. Its 18-bit conversion resolution supports professional and consumer audio conversion tasks, while the 2 kHz to 50 kHz sampling-rate range accommodates different playback, communication, and recording formats.

When laying out the circuit, place the analog input and supply bypass capacitors close to their associated pins and route serial clock and data traces away from sensitive audio inputs. Confirm the interface-voltage levels and master-clock arrangement against the manufacturer pin-description table before finalizing the PCB because the operating architecture depends on the surrounding digital-audio system.

This product record combines the converter’s key electrical and package specifications, practical application guidance, family-level replacement information, and a parameter comparison that helps engineers assess the CS5330A-KS before integrating it into an audio signal chain.

드롭인 대체품: CS5330A-KS — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: CS5330A-KS (동일 폼 팩터 및 풋프린트) — 차이점: Package, Number of Channels, Pin Count, Operating Temperature, Supply Voltage.

Cirrus Logic Inc.
Package: SOIC-8 (KS)
Number of Channels: 2 (Stereo - L/R)
Pin Count: 8
비교 대상: CS5330A-KS →
Cirrus Logic Inc.
Package: 8-pin surface-mount package
비교 대상: CS5330A-KS →

CS5331A-DS

✅ 드롭인
Cirrus Logic Inc.
📦 SOIC-8
Stereo analog-to-digital converter · 18 bit · 2 channels · Delta-sigma modulation · 128 times · Linear-phase digital filter with decimation · 21.7 kHz · 0.05 dB

가격 문의

데이터시트 보기 →

CS5330A-KS 최대 정격 & 전기적 특성

ADC Type Sigma-delta
분해능 18 bit
Number of Channels 2 channels
샘플링 속도 2 kHz to 50 kHz
Dynamic Range 94 dB
공급 전압 4.75 V to 5.25 V
Digital Input Voltage 3.6 V to 4.4 V
Normal Operating Power 150 mW
Digital Filter Passband 21.7 kHz
Passband Ripple 0.05 dB
Stopband Rejection >80 dB
동작 온도 -40°C to +85°C
Screening Level Industrial
패키지 SOIC-8, lead-free
핀 수 8 pins
실장 유형 Surface mount

CS5330A-KS soic-8, lead-free 핀 구성 가이드

CS5330A-KS(soic-8, lead-free 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

CS5330A-KS의 soic-8, lead-free 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: CS5330A-KS.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

CS5330A-KS 적합 용도: 6 애플리케이션s: Digital Audio Recording, Professional Audio Interface, Multimedia Audio Capture, Portable Audio Device, Consumer Audio Playback, Industrial Instrumentation.

🎧

Digital Audio Recording

The CS5330A-KS is well suited to stereo digital recording because it converts both audio channels at 18-bit resolution with 94 dB dynamic range. Its sample rate can be adjusted from 2 kHz to 50 kHz, allowing a design to support multiple recording and playback clocking formats. The integrated linear-phase digital anti-alias filter reaches 21.7 kHz with only 0.05 dB passband ripple and more than 80 dB stopband rejection, reducing the need for a separate digital filtering stage. Normal operating power is approximately 150 mW, which benefits compact portable recorders.

🎙️

Professional Audio Interface

The CS5330A-KS can form the stereo capture stage of a professional or semi-professional audio interface. Its 18-bit conversion and 94 dB dynamic range provide useful headroom for line-level input conditioning, while the 2 kHz to 50 kHz range supports several project sample-rate requirements. The integrated anti-alias filtering simplifies the digital signal path, and the single +5 V supply reduces the number of rails required around the converter. Board designers should still isolate clocks and serial data from analog inputs to preserve low-noise operation.

📺

Multimedia Audio Capture

The CS5330A-KS is appropriate for multimedia equipment that captures stereo audio alongside video or communications streams. Its two-channel architecture supplies synchronized left- and right-channel 18-bit results in serial form, and the adjustable sampling rate allows direct adaptation to the host digital-audio clock. Because the converter integrates anti-alias filtering and needs only one +5 V supply, it can simplify the analog front end of a compact set-top, control panel, or consumer media appliance while supporting a -40°C to +85°C industrial temperature range.

📱

Portable Audio Device

The approximately 150 mW normal operating requirement makes the CS5330A-KS suitable for portable equipment where converter power contributes to battery budget. Its 18-bit stereo resolution and 94 dB dynamic range suit playback, recording, and communications audio, while the integrated anti-alias filter reduces external filtering overhead. A battery-powered implementation must provide a regulated +5 V rail through an efficient boost stage. The compact SOIC-8 package and single-supply architecture simplify board-area planning in compact portable products.

🔊

Consumer Audio Playback

The CS5330A-KS can be used in consumer audio products requiring two-channel digital conversion rather than a single-channel acquisition path. Its serial output represents 18-bit values for both channels, and the 2 kHz to 50 kHz sample-rate range accommodates common embedded audio workflows. The linear-phase digital filter provides 21.7 kHz passband, 0.05 dB ripple, and more than 80 dB stopband rejection, supporting clean in-band reproduction. Integration reduces the need for a discrete anti-alias filter and makes the converter practical for compact playback and monitoring electronics.

🏭

Industrial Instrumentation

The CS5330A-KS can support stereo measurement channels in industrial instrumentation and data-acquisition equipment operating from -40°C to +85°C. Its sigma-delta architecture, 18-bit resolution, and 94 dB dynamic range are suitable for slow or medium-rate precision measurements, while the adjustable sample rate extends from 2 kHz to 50 kHz. Integrated anti-alias filtering helps control out-of-band energy before conversion. Layout should prioritize low-noise analog grounding, short supply bypass paths, and separation between sensitive inputs and the digital clock interface.

What are the key specifications of CS5330A-KS that engineers should know?
The CS5330A-KS is an 18-bit, two-channel sigma-delta audio ADC with a sampling rate adjustable from 2 kHz to 50 kHz. According to the Cirrus Logic manufacturer datasheet, it operates from a single +5 V supply, provides 94 dB dynamic range, and includes a linear-phase digital anti-alias filter with a 21.7 kHz passband. It is packaged in an 8-pin, lead-free SOIC and specified for industrial temperatures from -40°C to +85°C.
What is the operating voltage of CS5330A-KS?
The CS5330A-KS uses a single +5 V analog supply, with the listed operating range shown as 4.75 V to 5.25 V. The listed digital interface voltage is 3.6 V to 4.4 V. According to the Cirrus Logic manufacturer datasheet, normal operating power is approximately 150 mW. These supply and interface limits should be checked against the surrounding audio system before layout and schematic signoff.
What is the sampling rate and resolution of CS5330A-KS?
The CS5330A-KS provides 18-bit conversion resolution for both left and right channels and supports an output sample rate that can be adjusted from 2 kHz to 50 kHz. According to the Cirrus Logic manufacturer datasheet, it generates 18-bit values in serial form after performing sampling and anti-alias filtering. The adjustable rate makes the converter suitable for several digital-audio formats and embedded audio subsystems.
Where can I download the CS5330A-KS datasheet PDF?
The CS5330A family datasheet is available through the PDF link on this product page and describes the CS5330A/31A stereo audio ADC. According to the manufacturer documentation, the document covers the 8-pin converter, filtering characteristics, operating limits, and interface information. Use the pin-description table and electrical-characteristics sections as the controlling references for schematic design and PCB implementation.
Where can I find the CS5330A-KS pinout?
The CS5330A-KS pin assignments are defined in the pin-description table of the Cirrus Logic CS5330A/31A manufacturer datasheet. The device is an 8-pin SOIC and includes stereo analog inputs, digital-audio interface signals, and supply connections. Use the numbered package drawing in that document to assign PCB nets and to confirm exposed versus no-connect positions rather than relying on a generic SOIC-8 footprint.
What can replace the CS5330A-KS on the same 8-pin footprint?
The CS5331A-DS is the closest identified family-level drop-in candidate because it belongs to the Cirrus Logic CS5330A/31A stereo ADC family and uses an 8-pin SOIC. Its interface and application requirements must still be checked before substitution. The CS5330A-KSZR also appears in cross-reference results, but it differs mainly in ordering or reel-code configuration and therefore is not treated as a distinct engineering alternative here.
Is the CS5331A-DS a drop-in replacement for CS5330A-KS?
The CS5331A-DS is a potential 8-pin family-level replacement for the CS5330A-KS, but final equivalence depends on the required clocking, serial-interface, and digital-mode behavior. Both devices are associated with the CS5330A/31A stereo ADC family and the same 18-bit resolution. According to the manufacturer family documentation, both provide serial output for left and right channels and integrated anti-alias filtering.
When should I choose CS5330A-KS instead of CS5331A-DS?
Choose the CS5330A-KS when the existing design is qualified around its exact clocking and serial-interface behavior and when an unchanged, qualified BOM is preferred. Choose the CS5331A-DS only after confirming that its operating mode, timing, master-clock requirements, and serial output behavior match the existing circuit. Both devices provide 18-bit stereo conversion from the same manufacturer family, so interface details determine the final choice.
Is CS5330A-KS suitable for digital audio recording?
The CS5330A-KS is suitable for digital audio recording systems that use a 2 kHz to 50 kHz sampling rate and require 18-bit stereo conversion. Its 94 dB dynamic range and integrated linear-phase digital anti-alias filter help preserve audio-band signal quality while controlling out-of-band energy. The converter also fits low-power portable designs because normal operating power is approximately 150 mW.
How do I design the power bypass network for CS5330A-KS?
Place the CS5330A-KS supply bypass capacitors directly beside the +5 V and ground pins, using the shortest possible traces and minimizing loop area. Keep analog input routing away from the digital clock and serial-data nets. According to the Cirrus Logic manufacturer datasheet, the converter operates from a single +5 V supply, so local decoupling is important for maintaining low-noise conversion performance in audio and data-acquisition systems.
What is the CS5330A-KS dynamic range and anti-alias performance?
The CS5330A-KS provides 94 dB dynamic range and uses a linear-phase digital anti-alias filter. According to the Cirrus Logic manufacturer datasheet, the passband extends to 21.7 kHz with 0.05 dB passband ripple and provides greater than 80 dB stopband rejection. These figures describe the integrated converter filtering and are useful when evaluating whether the part can replace a discrete analog-filter and ADC signal chain.
Where can I buy CS5330A-KS online?
Use the Request a Quote form on this page to request CS5330A-KS availability, commercial terms, and current lead time. The form is the appropriate route for a quote-based sourcing request and lets the supply chain confirm the exact suffix, package condition, and production needs. No fixed price or stock commitment should be inferred from a product page or third-party listing.
What is the price of CS5330A-KS?
Current commercial pricing for the CS5330A-KS is handled through the Request a Quote form on this page. Because pricing can vary with quantity, date, and required packaging or shipment conditions, request a quotation using the exact MPN CS5330A-KS. The form can also confirm whether the requested quantity is accepted and whether any minimum-order or lead-time conditions apply.
What is the lead time and stock status for CS5330A-KS?
Current stock status, lead time, and minimum-order quantity should be confirmed through the Request a Quote form on this page. Enter CS5330A-KS and the required production quantity so the supply chain can validate component availability rather than relying on a generic listing. For a new production design, also request lifecycle confirmation and any applicable change notifications.
What is the CS5330A-KS compliance status?
The CS5330A-KS is identified as a lead-free SOIC-8 part. According to the component specification, it uses a single +5 V supply and is screened for industrial operation from -40°C to +85°C. Specific RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations should be confirmed from the current manufacturer compliance documentation before a regulated production release.
Can I use CS5330A-KS in a battery-powered audio product?
The CS5330A-KS is suitable for battery-powered audio designs when the system provides the required +5 V operating rail. According to the Cirrus Logic manufacturer datasheet, the CS5330A/31A family requires approximately 150 mW during normal operation and was designed for low-power audio applications. Because the converter itself requires a 5 V supply, overall battery efficiency depends on the upstream boost or regulator used to create that rail.
Does CS5330A-KS need an external anti-alias filter?
The CS5330A-KS incorporates anti-alias filtering as part of its complete stereo conversion function. According to the Cirrus Logic family datasheet, the linear-phase digital filter has a passband to 21.7 kHz, passband ripple of 0.05 dB, and stopband rejection greater than 80 dB. The exact analog-input network still requires normal signal-conditioning design, but a separate digital anti-alias stage is not required for the described conversion function.

엔지니어링 참조 데이터: CS5330A-KS — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the CS5330A-KS for a new or existing stereo audio-conversion design requiring 18-bit resolution, a 2 kHz to 50 kHz adjustable sampling rate, 94 dB dynamic range, and integrated anti-alias filtering in an 8-pin SOIC. It is particularly useful when the design can use a single +5 V supply and needs approximately 150 mW normal operating power. The CS5331A-DS is the closest identified same-manufacturer family candidate and may be preferable when its clocking and operating-mode behavior better matches the host interface. Verify both device pin assignments and timing before substitution; an SOIC-8 footprint match is not sufficient by itself. No additional cross-brand drop-in candidate could be established from the available compatibility information, so a redesign should not be based on an assumed equivalent. For new mixed-signal layouts, follow the manufacturer filter and power guidance, keep analog and digital routes separated, and validate the complete interface timing on hardware.

대체품과의 비교

파라미터 이 제품 CS5331A-DS
Package SOIC-8, lead-free SOIC-8
Brand Cirrus Logic Inc. Cirrus Logic Inc.
ADC Type Sigma-delta Sigma-delta
Resolution 18 bit 18 bit
Channels 2 channels 2 channels
Sampling Rate 2 kHz to 50 kHz 2 kHz to 50 kHz
Dynamic Range 94 dB 94 dB
Supply Voltage 4.75 V to 5.25 V 4.75 V to 5.25 V
Power Consumption 150 mW normal operation 150 mW normal operation

주요 차별점

  • Complete integrated stereo conversion and anti-alias filtering (vs CS5331A-DS)
  • Broadly adjustable output sampling rate (vs CS5331A-DS)
  • Low normal operating consumption (vs CS5331A-DS)
  • Single +5 V family architecture (vs CS5331A-DS)

설계 노트

Place the CS5330A-KS bypass capacitors beside the +5 V and ground pins, with the shortest practical trace and via connections. Keep analog input traces away from the serial clock, latch, and data lines. The device performs stereo conversion in a compact SOIC-8 package, so pin-trace geometry has a direct effect on noise pickup. Use a continuous ground reference under the analog section and avoid routing digital return current through sensitive input-return paths.

Treat the clock and serial-data connections as a coordinated digital interface rather than independent nets. Maintain the timing relationships specified in the manufacturer datasheet and avoid long stubs between the converter and the receiving device. The 2 kHz to 50 kHz output-rate range does not change the requirement for clean clock delivery, because clock jitter and edge noise can affect conversion timing even when the analog filter characteristics meet their stated values.

Do not select the CS5330A-KS from package shape alone and assume that every 8-pin stereo ADC is interchangeable. Confirm pin assignments, clock master/slave behavior, operating mode, serial output timing, and analog input arrangement from the CS5330A/31A family datasheet. Also distinguish the CS5330A-KS from ordering or reel-code variants, which do not necessarily represent a different electrical design. A footprint match alone does not establish functional drop-in compatibility.

Budget the converter from its approximately 150 mW normal operating requirement and use the 4.75 V to 5.25 V supply range for design margins. In battery-powered equipment, include the conversion loss of the upstream 5 V regulator rather than treating the ADC consumption as the complete system draw. Validate startup, clock stability, and analog settling before enabling downstream processing to avoid capturing unsettled conversion results.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The part is identified as a lead-free SOIC-8 component and is screened for industrial operation. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer compliance documentation.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

CS5330A-KS datasheet CS5330A-KS datasheet pdf CS5330A-KS pinout CS5330A-KS specifications CS5330A-KS equivalent CS5330A-KS replacement CS5330A-KS drop-in replacement CS5330A-KS vs CS5331A-DS CS5330A-KS price CS5330A-KS stock Cirrus Logic CS5330A-KS CS5330A-KS SOIC-8 footprint CS5330A-KS application circuit 18-bit stereo ADC SOIC-8

관련 부품 & 용어

Cirrus Logic Inc. CS5330A-KS CS5331A-DS CS5330A CS5331A ADC analog-to-digital converter stereo audio ADC sigma-delta ADC data-conversion IC precision analog device 18-bit resolution 94 dB dynamic range 2 kHz to 50 kHz sampling rate 21.7 kHz passband 0.05 dB passband ripple 80 dB stopband rejection single +5 V supply 150 mW normal operating power SOIC-8 QFN package family surface mount industrial temperature range lead-free packaging digital audio
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기