CY7C68300A-56PVXC USB 2.0 ATA Bridge | Infineon
MPN: CY7C68300A-56PVXC ✓ AktifCY7C68300A-56PVXC Ringkasan
A USB-to-ATA bridge is an interface controller that allows a USB host to communicate with a conventional parallel ATA or ATAPI storage device. Within the broader hierarchy, it is a USB interface controller, then a mass-storage interface IC, then a peripheral interface integrated circuit. This fixed-function category differs from a software-programmable USB controller: the bridge performs the USB mass-storage protocol conversion directly, reducing the host-side processing required for a compliant storage transfer.
The principal device characteristics are a USB 2.0 host connection, a dedicated ATA/ATAPI mass-storage connection, Mass Storage Class Bulk-Only Transport support, a 56-SSOP package, and operation in self-powered systems. Because it bridges USB to a parallel ATA device rather than directly driving a flash-based device, the design must also account for ATA signal integrity, connector pin assignment, cable or enclosure geometry, and power-supply capacity. The bridge consolidates these host-interface and mass-storage functions into one fixed-function controller.
Functionally, the CY7C68300A implements the command and data-path translation required for a USB host to exchange Bulk-Only Transport data with an ATA or ATAPI device. The USB side provides the external computer interface, while the ATA side communicates with the internal storage mechanism. This separation allows an existing ATA-based drive design to be reused in a USB enclosure, provided that the enclosure supplies adequate power, USB signaling, ATA wiring, and mechanical support.
Typical implementations include USB-to-IDE storage bridges, external hard-drive enclosures, portable backup appliances, media-copy systems, and industrial data-capture equipment with local storage. In these systems, the bridge can be placed directly between the USB connector and the ATA device connector, simplifying firmware requirements on the storage controller. Designers should also consider whether a direct USB-to-SATA interface would be more appropriate when the mechanical enclosure is designed specifically for SATA devices rather than legacy ATA connectors.
For layout, follow the pin-description table and reference layout in the manufacturer datasheet for the 56-SSOP footprint, signal routing, and decoupling. Pay particular attention to USB differential pair routing, ATA signal integrity, ground-return paths, and power-supply isolation between the USB and drive domains. Prototype the interface with the intended enclosure, cable, and storage device, and verify enumeration and sustained transfer behavior before releasing the PCB.
This page consolidates the manufacturer datasheet information, distributor catalog records, package details, protocol coverage, and practical interface-design guidance for engineers evaluating the CY7C68300A-56PVXC as a USB 2.0 mass-storage interface solution.
Alternatif penggantian untuk CY7C68300A-56PVXC — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian CY7C68300A-56PVXC (sama faktor bentuk dan footprint) — berbeda di dalam Product Type, Package, Supply Voltage, Device Classification.
CY7C68300C-56PVXC
✅ Drop-InKontak untuk harga
Lihat Datasheet →CY7C68300C-56PVC
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
CY7C68300A-56PVC
✅ Drop-InKontak untuk harga
Lihat Datasheet →CY7C68013A-56PVXC
✅ Drop-InKontak untuk harga
Lihat Datasheet →CY7C68300A-56PVXC
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →CY7C68300A-56PVXC Spesifikasi
| Product Type | Fixed-function USB to ATA/ATAPI bridge |
| USB Interface Version | USB 2.0 |
| Host Port Count | 1 USB port |
| Storage Port Count | 1 ATA or ATAPI device port |
| Supported Mass Storage Protocol | USB Mass Storage Class Bulk-Only Transport |
| Architecture | Fixed-function |
| Paket | 56-pin SSOP |
| Tipe Mounting | Surface mount |
| Intended Power Configuration | Self-powered devices |
| Device Category | USB bridge controller |
| Storage Interface | ATA/ATAPI |
| Data Path | USB host to ATA/ATAPI mass-storage device |
CY7C68300A-56PVXC 56-pin ssop Diamant Konfigurasi Panduan
Konfigurasi pin untuk CY7C68300A-56PVXC (56-pin ssop pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk CY7C68300A-56PVXC.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
CY7C68300A-56PVXC cocok untuk 6 aplikasis: USB-to-IDE External Storage Enclosure, Portable Backup and Media-Copy Appliance, Industrial Data-Logging Terminal, USB Storage Adapter for Legacy ATA Equipment, Self-Powered Archive and Imaging Station, AV and Broadcast Asset Transfer System.
USB-to-IDE External Storage Enclosure
The Infineon CY7C68300A-56PVXC fits an enclosure that exposes a USB 2.0 connector to a host but stores data on a parallel ATA or ATAPI device. Place the bridge between the USB connector and the internal drive interface so the computer can access the drive through Mass Storage Class Bulk-Only Transport. Its fixed-function architecture removes the need to implement a USB mass-storage protocol stack in the storage controller. Because the manufacturer positions the device for self-powered systems, the enclosure must provide suitable local power for both the bridge and the storage mechanism. Validate the complete enclosure with the intended USB cable because USB signal integrity, ATA routing, and connector geometry all affect practical reliability.
Direkomendasikan
Portable Backup and Media-Copy Appliance
The CY7C68300A-56PVXC can bridge a USB 2.0 host connection to an ATA or ATAPI storage device in a portable backup appliance. The dedicated mass-storage interface allows the equipment to present a standard Bulk-Only Transport device to the host while keeping ATA handling in a dedicated controller. This arrangement is useful when the appliance uses a legacy parallel storage mechanism but needs a modern external connection. Power budgeting is essential because the part is intended for self-powered devices, and the attached storage mechanism may draw substantially more current than the bridge itself. Validate suspend, resume, and repeated-removal behavior in addition to sustained transfers.
Direkomendasikan
Industrial Data-Logging Terminal
Use the CY7C68300A-56PVXC when an industrial data-logging terminal must transfer locally recorded information from an ATA or ATAPI device to a USB host. The bridge provides a fixed-function USB 2.0 mass-storage path and adheres to the Bulk-Only Transport specification, allowing a host to mount the storage device for file transfer. This can simplify the terminal's firmware compared with an embedded host that must implement USB mass-storage commands itself. The self-powered target architecture supports designs with an industrial battery or local supply. Keep the ATA path away from noisy actuator and power-conversion circuitry, and test read/write integrity over the full operating-temperature range required by the equipment.
Direkomendasikan
USB Storage Adapter for Legacy ATA Equipment
The CY7C68300A-56PVXC is suitable for retrofitting USB connectivity to legacy equipment that retains an ATA or ATAPI device port. The fixed-function bridge translates between the USB host and the mass-storage device rather than requiring the legacy controller to be redesigned. A USB-to-ATA adapter board can therefore concentrate connector protection, data routing, and storage interfacing in one small assembly. The 56-SSOP package supports compact adapter construction, although the complete board still needs appropriate ATA signal routing, decoupling, and drive-power distribution. Confirm all connector assignments against the manufacturer pin-description table and verify hot-plug, removal, and error-recovery behavior with the actual storage mechanism.
Direkomendasikan
Self-Powered Archive and Imaging Station
The Infineon CY7C68300A-56PVXC can connect an ATA or ATAPI imaging drive to a USB 2.0 workstation in a self-powered archive or imaging station. The standard Bulk-Only Transport interface allows the workstation to recognize the attached storage device and exchange bulk data without a custom host-side protocol. Because the bridge is a fixed-function part, the design team can focus on power delivery, drive connectors, and mechanical reliability rather than USB protocol development. The self-powered design intent is particularly relevant for stations that must operate without relying on USB bus power. Validate command timing, sustained transfer stability, and recovery after a power interruption with the target drive selected for production.
Direkomendasikan
AV and Broadcast Asset Transfer System
The CY7C68300A-56PVXC can support a USB-connected media-transfer system built around an ATA or ATAPI storage device. The bridge provides a standardized path for moving captured audio, video, or configuration files from the embedded storage to a workstation using USB Mass Storage Class Bulk-Only Transport. Its fixed-function operation is advantageous when the embedded system has limited processing capacity and cannot absorb an additional USB host stack. The design must maintain clean separation between the USB and ATA interfaces, especially when high-power media drives share the enclosure. Test with representative file sizes and multiple host operating systems, and verify that the enclosure's power supply maintains all required levels during sustained transfers.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk CY7C68300A-56PVXC — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | CY7C68300C-56PVXC | CY7C68300C-56PVC | CY7C68300A-56PVC | CY7C68013A-56PVXC |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 56-SSOP | 56-SSOP | 56-SSOP | 56-SSOP | 56-SSOP |
Diferensiator Kunci
- Dedicated fixed-function USB-to-ATA bridge (vsCY7C68013A-56PVXC)
- Established 56-pin SSOP mechanical footprint (vsCY7C68300C-56PVXC)
- Direct USB 2.0 ATA interface integration (vsCY7C68300A-56PVC)
Catatan Desain
Use the manufacturer datasheet's reference layout as the basis for component placement and signal routing. Route the USB differential pair as a compact impedance-controlled pair, provide a continuous ground reference, and place decoupling capacitance close to the associated supply pins. Keep ATA traces away from switching-converter outputs and high-current drive-supply paths. Because no public pin list was confirmed for this page, use the pin-description table in the manufacturer datasheet when assigning every footprint location.
Design the enclosure around the self-powered architecture identified in the manufacturer datasheet. The bridge and the attached ATA or ATAPI storage device may require local supply capacity beyond what the USB host can provide. Separate the bridge's clean interface supply from drive-related current where practical, and confirm voltage tolerances, startup sequencing, and maximum load current from the electrical characteristics tables before releasing the power design.
Do not treat the 56-SSOP footprint as proof that any CY7C68300 or CY7C68013 family member is automatically interchangeable. Verify every pin, the ATA feature set, USB enumeration behavior, supply limits, and operating-temperature requirements against the manufacturer datasheets. Prototype with the intended storage device and cable, and test enumeration, sustained transfers, unexpected removal, power interruption, and recovery before approving a replacement for production.
Informasi Konformitas
No explicit compliance declarations were present in the retrieved manufacturer and distributor records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the current manufacturer documentation before release.